Huawei EC1270 Quick Start Manual

Thank you for choosing the iFox CDMA 311A USB Slider
Modem. With your USB Slider, you can access a wireless
network at high speed.

Note:

This manual describes the appearance of the USB Slider, as well as the procedures for
preparation, installation, and removal. For operation details about the management
program, see the online help included in the management program.

Getting to Know Your iFox CDMA 311A USB Slider Modem

The following figure shows the appearance of the USB Slider. It is provided only for your
reference. The actual product may be different.

1

1

2

5

3

4

n USB Connector

It connects the USB Slider to a PC.

o Slider

It extends or retracts the USB connector.

p Indicator

It indicates the status of the USB Slider.

2

z Solid: The USB Slider is powered on.
z Blinking once every 2s: The USB Slider is searching for a network or no network is

found.

z Blinking twice every 2s: The USB Slider finds a network.
z Blinking once every 0.2s: The USB Slider is transmitting data.

q UIM Card Slot

It holds a User Identity Module (UIM) card.

r MicroSD Card Slot

It holds a microSD card.

Getting Your iFox CDMA 311A USB Slider Modem Ready

Installing the UIM and mircoSD Card

1. Slide the back cover to remove it from the USB Slider.

2. Insert the UIM card and the microSD card into the corresponding card slots, as shown in

3