Huawei E8377S-153 User Manual

Quick Start

Thank you for choosing the HUAWEI CarFi. The HUAWEI
CarFi allows your portable devices to connect to a Wi-Fi
network while you're in a moving vehicle.

Application scenario

Insert the HUAWEI CarFi's power connector end into your car's 12 V cigarette lighter socket.
Your HUAWEI CarFi will then be able to:

 Provide Internet access for Wi-Fi devices
 Supply power to devices via the USB port (rated output: 5 V, 1 A)

Getting to Know Your HUAWEI CarFi

The following figure shows the HUAWEI CarFi. It is provided only for your reference. The actual
product may vary.

1
2
3
4

6
7

5

 Power bu tton
 Network indicator

 Blinking red: the HUAWEI CarFi is starting up.
 Steady red: the HUAWEI CarFi failed to register with network or only a 2G network is

available.

 Steady yellow: weak 3G/LTE signal strength or disabled external charging function.
 Steady green: strong 3G/LTE signal strength.
 Blinking cyan: the HUAWEI CarFi software is being updated.

 Message indicator

 Blinking white (first 3 minutes) and then remaining steady white: the message inbox is full.
 Steady white: there are unread messages in your inbox, or the message storage is full.
 Off: there are no unread messages in your inbox.

 USB port
 12 V power connector
 Micro-SIM card slot
 Reset button

Press and hold the reset button for 2 seconds to restore the HUAWEI CarFi to its factory
settings.

Note:

Restoring the default settings of the HUAWEI CarFi will erase all previous settings.

Getting Started

Step 1:

Insert your micro-SIM card.

1 2 3