No part of this document may be reproduced or transmitted in any
form or by any means without prior written consent of Huawei
Technologies Co., Ltd.
The product described in this manual may include copyrighted
software of Huawei Technologies Co., Ltd and possible licensors.
Customers shall not in any manner reproduce, distribute, modify,
decompile, disassemble, decrypt, extract, reverse engineer, lease,
assign, or sublicense the said software, unless such restrictions are
prohibited by applicable laws or such actions are approved by
respective copyright holders under licenses.
Trademarks and Permissions
, HUAWEI, and re trademarks or registered trademarks of
Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned
are the property of their respective owners.
1
Notice
Some features of the product and its accessories described herein
rely on the software installed, capacities and settings of local
network, and may not be activated or may be limited by local
network operators or network service providers, thus the
descriptions herein may not exactly match the product or its
accessories you purchase.
Huawei Technologies Co., Ltd reserves the right to change or
modify any information or specifications contained in this manual
without prior notice or obligation.
NO WARRANTY
THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”.
EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO WARRANTIES
OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN
NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE LIABLE
FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL
2
DAMAGES, OR LOST PROFITS, BUSINESS, REVENUE, DATA,
GOODWILL OR ANTICIPATED SAVINGS.
Import and Export Regulations
Customers shall comply with all applicable export or import laws
and regulations and will obtain all necessary governmental permits
and licenses in order to export, re-export or import the product
mentioned in this manual including the software and technical data
therein.
3
2 Getting Started
Your Phone at a Glance
17
16
15
14
13
12
1
2
3
4
5
6
7
8
9
10
11
1Flashlight2
4
18
19
Charger/Data cable
connector
3Earpiece4
Volume up key
5
Volume down key
7
Right soft key
9
Numeric keys
External antenna
11
connector
13
Call key
15
Navigation keys
17Headset jack18Main camera
19Speaker
Note: The preceding figure is provided for your reference only.
6
Confirm key
8
End key
10
# key
12
* key
14
Left soft key
16Screen
Keys and Functions
Call key
• Make or answer a call.
• Access call logs in standby mode.
5
End key
Left soft
key
Right soft
key
* key
# key
0 key
…
9 key
• Power on or power off the phone by pressing and
holding it.
• End or reject a call.
• Return to the standby mode.
• Turn on or off the phone backlight.
Select the option displayed in the lower left corner of
the screen.
Select the option displayed in the lower right corner
of the screen.
Switch between the current mode and the Meeting
mode by pressing and holding it.
Switch between text input methods when editing
text.
• Enter numbers, letters, and symbols.
• Call the voicemail in standby mode by pressing
and holding the 1 key.
• Speed-dial phone numbers in standby mode by
pressing and holding the desired key 2–9 after a
phone numbers are assigned to the number key.
6
Confirm
key
Navigation
keys
Volume up
key
Volume
down key
Confirm a selection.
• Switch between shortcuts when the standby
screen is set to Functional mode.
• Access the corresponding functions in standby
mode when the standby screen is set to Concise
mode.
• Press to increase the volume.
• In standby mode, press and hold to access the
Compass.
• Press to decrease the volume.
• In standby mode, press and hold to turn on or turn
off the flashlight.
7
Removing the Back Cover and the Battery
Cover
Turn the screw
1
anticlockwise
to open
2
12
Note:
Do not use your fingernails to unscrew the battery cover. Use a coin or screw
driver, instead.
8
Inserting the USIM/SIM Card and the
1
2
Battery
Inserting the microSD Card
2
1
9
Charging the Battery
Before charging the battery with the travel charger, ensure that the
battery is installed in your phone. Do not use a damaged battery or
charger.
1. Connect the charger to a power outlet.
2. Connect the charger to the charger connector of the phone. The
phone begins charging. When the battery icon changes to fully
charged, it indicates that your phone is fully charged.
3. When the phone is fully charged, disconnect the charger from
the phone and then from the power outlet.
Status Icons
Signal strengthRoaming
10
2G network available3G network available
The phone is receiving
and sending data
through 2G network
Call in progress
New text message
received
The memory for
multimedia messages
is full
New emergency
message received
Alarm clock enabledBluetooth on
Bluetooth headset
connected
11
The phone is receiving
and sending data
through 3G network
The memory for text
messages is full
New multimedia
message received
New voicemail
message received
microSD card inserted
The phone is receiving
date through Bluetooth
The phone is sending
data through Bluetooth
Battery level
Battery charging
General mode
activated
Meeting mode
activated
My profile 1 mode
activated
Headset connected
Music player playing in
the background
Silent mode activated
Outdoor mode
activated
My profile 2mode
activated
Offlinemode activated
12
Loading...
+ 36 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.