Huawei C2601 User Manual

C2601

CDMA 1X Mobile Phone

Copyright © 2007 Huawei Technologies Co., Ltd.

and other Huawei trademarks are the trademarks or registered trademarks of Huawei Technologies Co., Ltd. in the People’s Republic of China and certain other countries. All other trademarks mentioned in this manual are the property of their respective holders. The information in this manual is subject to change without notice. Every effort has been made in the preparation of this manual to ensure accuracy of the contents, but all statements, information, and recommendations in this manual do not constitute the warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base, Bantian, Longgang, Shenzhen 518129, People's Republic of China Tel: [phone] Global Hotline: [phone]

E-mail: [e-mail] Website: www.huawei.com

Your Phone

Screen

Navigation Keys

Left Soft Key

Dial/Send Key

Number Keys

Key

Charger Interface

Earpiece

Right Soft Key

End/Power Key

Key

Microphone

1

Keys and Functions

Press…

–

To…

z View the dialled calls in the standby mode. z Make or answer a call.

z Power on or off the phone (by pressing and holding it).

z End a call or reject an incoming call. z Return to the home screen.

Select the option displayed on the lower left corner of the screen.

Select the option displayed on the lower right corner of the screen.

zDisplay the Profiles interface (), the Messages interface ( ), the Scheduler interface (), and

the Alarm interface () in the standby mode.

zIncrease the volume ( or ) or decrease the volume ( or ) during a call.

zEnter numbers and characters.

zSpeed-dial phone numbers in the standby mode (by pressing and holding the 1-9 keys).

zSelect a submenu item labeled the corresponding number.

2

	Press…				To…
					z Enter the * symbol.
					z Enable or disable the Meeting profile (by pressing
					and holding it).

zProvide different functions according to the phone features being used.

zEnter the # symbol.

zLock the keypad in the standby mode (by pressing

and holding it).

zProvide different functions according to the phone features being used.

Screen Icons

	Icon	Description		Icon		Description
		Network signal strength				Battery power level
		Calling…				General profile
		Voice privacy				Meeting profile
		Roaming…				Silent profile
		CDMA 1X network				Outdoor profile
		Message received				Keypad locked
		Emergency message				Alarm clock on
		received
		Memory for messages full				Voice mail

3

Menu Tree

		Messages			Tools
		1 Write Message			1	Recorder
	2		Inbox		2 Alarm
	3		Outbox		3	Scheduler
	4		Draft		4	Calculator
	5		Voice Mail		5	Gallery
	6		Templates
					Profiles
	7		Message Settings
					1	General
	8		Delete All
					2	Meeting
		Contacts
					3	Silent
	1		Search		4	Outdoor
		2 Add New
					Settings
	3		Groups
					1	Display
	4		Speed Dial
					2	Call Settings
	5		Copy All (*)
					3	Phone Settings
	6		Delete All
					4	Security
		7 My Phone No.
	8		Memory Status
		Call Log			Copy All (*)
	1		Missed Calls
					If the UIM card is available, the Copy
	2		Received Calls
					All submenu item is displayed under
	3		Dialled Calls		the Contacts item.
	4		Call Duration
	5		Delete All

4

Installing the UIM Card and Battery

Consult the network operator whether a UIM card is needed.

Make sure that the golden area on the UIM card is facing downwards and the cut-off edge is correctly aligned with the card holder.

Removing the Battery and UIM Card

Make sure that your phone is powered off.

Charging the Battery

1.Connect the charger to the charger interface at the bottom of your phone.

Make sure that the arrow on the charger connector faces the front of the phone.

2.Connect the charger to an AC power socket.

3.During the charging, the charging icon is displaying in animation.

4.When the charging icon becomes static, the battery is fully charged. Disconnect the charger from the AC power socket.

5.Disconnect the charger from the phone.

5