C2206
CDMA 1X Mobile Phone
Copyright © 2008 Huawei Technologies Co., Ltd.
and other Huawei trademarks are the trademarks or registered trademarks of Huawei Technologies Co., Ltd.
in the People’s Republic of China and certain other countries. All other trademarks mentioned in this manual are the
property of their respective holders. The information in this manual is subject to change without notice. Every effort
has been made in the preparation of this manual to ensure accuracy of the contents, but all statements, information,
and recommendations in this manual do not constitute the warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base, Bantian, Longgang, Shenzhen 518129, People's Republic of China
Tel: +86-755-28780808 Global Hotline: +86-755-28560808
E-mail: mobile@huawei.com Website: www.huawei.com
Table of Contents
Your Phone...............................................................................1
Keys and Functions ..................................................................2
Screen Icons..............................................................................3
Menu Tree.................................................................................4
Installing the UIM Card and Battery........................................5
Removing the Battery and UIM Card ......................................5
Charging the Battery.................................................................5
Using the Function Menu .........................................................6
Making a Call ........................................................................... 6
Answering a Call......................................................................7
Activating your Speaker phone ................................................ 7
Recording a Voice Clip............................................................. 7
Switching On the Radio............................................................8
Searching for a Channel ...........................................................8
Phone Lock...............................................................................8
PIN and PUK............................................................................9
Locking the Keypad..................................................................9
Changing the Text Input Modes...............................................9
Entering English (eZiEn)........................................................ 10
Entering English (ABC, Abc and abc) ................................... 10
Entering Hindi ........................................................................ 11
Entering Numbers................................................................... 11
Entering Symbols ...................................................................11
Warnings and Precautions ...................................................... 11
i
Your Phone
Screen
Navigation Keys
Left Soft Key
Talk/Send Key
Number Keys
Headset Jack
Earpiece
Right Soft Key
End/Power Key
Charger Interface
* Key
Speaker
# Key
1
Keys and Functions
Press… To…
z
View the dialled calls in the standby mode.
z
Make or answer a call.
z
Power on or off the phone (by pressing and holding
it).
z
End a call or reject an incoming call.
z
Return to the standby mode.
z
Select the option displayed on the lower left corner
of the screen.
z
Select the option displayed on the lower right corner
of the screen.
z
Display the Brew and UTK interface ( ), the
Messages interface (
interface (by pressing and holding
Scheduler interface (
) in the standby mode.
(
z
Increase the volume ( or ) or decrease the
volume (
z
Enter numbers and characters.
z
Speed-dial phone numbers in the standby mode (by
pressing and holding the 1-9 keys).
z
Select a submenu item labeled the corresponding
number.
or ) during a call.
2
), the Write Message
), the
), and the Alarm interface
Press… To…
z
Enter the * symbol.
z
Enable or disable the Vibrate Only profile in the
standby mode (by pressing and holding it).
z
Provide different functions according to the phone
features being used.
z
Enter the # symbol.
z
Lock the keypad in the standby mode (by pressing
and holding it).
z
Provide different functions according to the phone
features being used.
Screen Icons
Icon Description Icon Description
Network signal strength Battery power level
Calling…
Voice Privacy
Roaming…
CDMA 1X network
Message received
Emergency message
received
Memory for messages full
3
profile
General
Vibrate Only
profile
profile
Silent
profile
Outdoor
Keypad locked
Alarm clock on
Voice message
received
Menu Tree
Messages
Messages
1 Write Message
1 Write Message
2 Inbox
2 Inbox
3 Outbox
3 Outbox
4 Draft
4 Draft
5 Voice Mail
5 Voice Mail
6 Templates
6 Templates
7 Message Settings
7 Message Settings
8 Delete All
8 Delete All
Contacts
Contacts
1 Search
1 Search
2 Add New
2 Add New
3 Groups
3 Groups
4 Speed Dial
4 Speed Dial
5 Copy All
5 Copy All
6 Delete All
6 Delete All
7 My Phone No.
7 My Phone No.
8 Memory Status
8 Memory Status
Call Log
Call Log
1 Missed Calls
1 Missed Calls
2 Received Calls
2 Received Calls
3 Dialled Calls
3 Dialled Calls
4 Call Duration
4 Call Duration
5 In Call Memo
5 In Call Memo
6 Delete All
6 Delete All
Tools
Tools
1 Recorder
1 Recorder
2 Alarm
2 Alarm
3 Scheduler
3 Scheduler
4 Calculator
4 Calculator
5 Gallery
5 Gallery
Profiles
Profiles
1 General
1 General
2 Vibrate Only
2 Vibrate Only
3 Silent
3 Silent
4 Outdoor
4 Outdoor
Settings
SettingsSettings
1 Display
1 Display
2 Call Settings
2 Call Settings
3 Phone Settings
3 Phone Settings
4 Security
4 Security
4
TATA Zone
TATA Zone
1 TATA Zone
1 TATA Zone
2 SMS Services
2 SMS Services
FM Radio
FM Radio
1 Switch Off
1 Switch Off
2 Speaker On/
2 Speaker On/
Speaker Off
Speaker Off
3 Auto Tuning
3 Auto Tuning
4 Manual Tuning
4 Manual Tuning
5 Fine Tuning
5 Fine Tuning
6 Set Frequency
6 Set Frequency
7 Save Channel
7 Save Channel
8 Delete Channel
8 Delete Channel
Installing the UIM Card and Battery
The User Identity Module (UIM) card and the T-SIM card are the
same, that is, Subscriber Identity Module.
Make sure that the golden area on the UIM card is facing downwards
and the cut-off edge is correctly aligned with the card holder.
b
a
Removing the Battery and UIM Card
Make sure that your phone is powered off.
a
b
Charging the Battery
1. Connect the charger to the charger interface at the bottom of your
phone.
2. Connect the charger to an AC power socket.
3. During the charging, the charging icon is displaying in animation.
5
Loading...