Huawei BTS3911E User Manual

Regulatory Compliance Statement

BTS3911E

Issue: 01

Date:2015-7-6

HUAWEI TECHNOLOGIES CO., LTD.

Issue (01)

Huawei Proprietary and Confidential

i

No part of this document may be reproduced or transmitted in any form or by any means without prior written

consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and the customer.

All or part of the products, services and features described in this document may not be within the purchase scope or

the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this

document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or

implied.

The information in this document is subject to change without notice. Every effort has been made in the preparation

of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this

document do not constitute the warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address:

Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website:

http://www.huawei.com

Email:

support@huawei.com

1 Regulatory Compliance Statement

Issue (01)

Huawei Proprietary and Confidential

1-1

1 Regulatory Compliance Statement

About This Chapter

1.1 Declaration of Conformity to European Directives

Figure 1-1 Declaration of Conformity to European Directives

None

2 Regulatory Compliance Information

Issue (01)

Huawei Proprietary and Confidential

2-1

2 Regulatory Compliance Information

About This Chapter

2.1 Regulatory Compliance Standards

2.2 European Regulatory Compliance

2.3 U.S.A Regulatory Compliance

2.4 Canada Regulatory Compliance

2.5 Japanese Regulatory Compliance

2.6 CISPR 22 Compliance

2.7 China RoHS hazardous substance table

2.8 India RoHS hazardous substance table

2.9 Other Markets

2.1 Regulatory Compliance Standards

Product complies with the standards listed in Table 2-1.

2 Regulatory Compliance Information

2-2

Huawei Proprietary and Confidential

Issue (01)

Table 2-1 Regulatory compliance standards

Discipline

Standards

EMC



CISPR22 Class B



CISPR24



EN55022 Class B



EN50024



ETSI EN 301 489 Class B



CFR 47 FCC Part 15 Class B



FCC Part 2



FCC Part 22



FCC Part 24



ICES 003 Class B/Class A



AS/NZS CISPR22 Class B



GB9254 Class B



VCCI Class B



CNS 13438 Class B



IEC61000-6-1



IEC61000-6-3



EN61000-6-1



EN61000-6-3

Safety



IEC 60950-1



IEC60950-22



IEC/EN60215



IEC/EN41003



EN 60950-1



UL 60950-1



CSA C22.2 No 60950-1



AS/NZS 60950.1



BS EN 60950-1



IS 13252



GB4943

Laser safety



FDA rules, 21 CFR 1040.10 and 1040.11



IEC60825-1, IEC60825-2, EN60825-1,

EN60825-2



GB7247

2 Regulatory Compliance Information

Issue (01)

Huawei Proprietary and Confidential

2-3

Discipline

Standards

RF



ETSI EN 301 908



ETSI EN 300 328



ETSI EN 301 893



FCC Part 2



FCC Part 24



FCC Part 27



RSS-133



RSS-139

Health



ICNIRP Guideline



1999-519-EC



EN 50385



OET Bulletin 65



FCC Part 1



IEEE Std C95.1



EN 60215



RSS-102

Environmental protection



2011/65/EU (RoHS)



EC NO. 1907/2006 (REACH)



2002/96/EC (WEEE)

Grounding



ITU-T K.27



ETSI EN 300 253

2 Regulatory Compliance Information

2-4

Huawei Proprietary and Confidential

Issue (01)

Discipline

Standards

NOTE

EMC: electromagnetic compatibility

NEBS: Network Equipment Build Standard

RF: radio frequency

CISPR: International Special Committee on Radio Interference

EN: European Standard

ETSI: European Telecommunications Standards Institute

CFR: Code of Federal Regulations

FCC: Federal Communication Commission

IEC: International Electrotechnical Commission

AS/NZS: Australian/New Zealand Standard

VCCI: Voluntary Control Council for Interference

CNS: Chinese National Standard

UL: Underwriters Laboratories

CSA: Canadian Standards Association

BS: British Standard

IS: Indian Standard

GR: General Requirement

FDA: Food and Drug Administration

BTS: Base Transceiver Station

GSM: Global System for Mobile communications

WLAN: wireless local area network

ICNIRP: International Commission on Non-Ionizing Radiation Protection

OET: Office of Engineering Technology

IEEE: Institute of Electrical and Electronics Engineers

RoHS: restriction of the use of certain hazardous substances

2.2 European Regulatory Compliance

Product complies with the following European directives and regulations.



2004/108/EC (EMC)



2006/95/EC (low voltage)



1999/5/EC (R&TTE)



2011/65/EU (RoHS)



EC NO. 1907/2006 (REACH)



2002/96/EC (WEEE)

Product complies with Directive 2002/95/EC, 2011/65/EU and other similar regulations from

the countries outside the European Union, on the RoHS in electrical and electronic equipment.

The device does not contain lead, mercury, cadmium, and hexavalent chromium and

brominated flame retardants (Polybrominated Biphenyls (PBB) or Polybrominated Diphenyl

Ethers (PBDE)) except for those exempted applications allowed by RoHS directive for

technical reasons.

2 Regulatory Compliance Information

Issue (01)

Huawei Proprietary and Confidential

2-5

Product complies with Regulation EC NO. 1907/2006 (REACH) and other similar regulations

from the countries outside the European Union. Huawei will notify to the European Chemical

Agency (ECHA) or the customer when necessary and regulation requires.

Product complies with Directive 2002/96/EC on waste electrical and electronic equipment

(WEEE). Huawei is responsible for recycling its end-of-life devices, and please contact

Huawei local service center when recycling is required. Huawei strictly complies with the EU

Waste Electrical and Electronic Equipment Directive (WEEE Directive) and electronic waste

management regulations enacted by different countries worldwide. In addition, Huawei has

established a system for recycling and reuse of electronic wastes, and it can provide service of

dismantling and recycling for WEEE. By Huawei recycling system, the waste can be handled

environmentally and the resource can be recycled and reused fully, which is also Huawei

WEEE stratagem in the word. Most of the materials in product are recyclable, and our

packaging is designed to be recycled and should be handled in accordance with your local

recycling policies.

In accordance with Article 11(2) in Directive 2002/96/EC (WEEE), products were marked

with the following symbol: a cross-out wheeled waste bin with a bar beneath as below:

In order to avoid the possibility of exceeding the Europe radio frequency exposure limits,

human proximity to the equipment shall not be less than 0.124 m

2.3 U.S.A Regulatory Compliance

2.3.1 Safety compliance Mark

2.3.2 FCC

2.3.1 Safety compliance Mark

2 Regulatory Compliance Information

2-6

Huawei Proprietary and Confidential

Issue (01)

2.3.2FCC

Product complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:



This device does not cause harmful interference.



This device must accept any interference received, including interference that may cause

undesired operation.

If this device is modified without authorization from Huawei, the device may no longer

comply with FCC requirements for Class B digital devices. In that a case, your right to use the

device may be limited by FCC regulations. Moreover, you may be required to correct any

interference to radio or television communications at your own expense.

This device has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This device generates, uses and radiates radio frequency energy. If it is not installed and used

in accordance with the instructions, it may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this device does cause harmful interference to radio or television reception, which can be

determined by turning the device off and on, the user may take one or more of the following

measures:



Reorient or relocate the receiving antenna.



Reinforce the separation between the device and receiver.



Connect the device into an outlet on a circuit different from that to which the receiver is

connected.



Consult the dealer or an experienced radio or TV technician for assistance.

In order to avoid the possibility of exceeding the 47CFR FCC Part 1 & OET Bulletin 65

radio frequency exposure limits, human proximity to the equipment shall not be less than

1.78 m

2.4 Canada Regulatory Compliance

2.4.1 RSS-Gen statement

This device complies with Industry Canada licence-exempt RSS standard(s).

2 Regulatory Compliance Information

Issue (01)

Huawei Proprietary and Confidential

2-7

Operation is subject to the following two conditions: (1) this device may not cause

interference, and (2) this device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio

exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil

ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage est susceptible d'en compromettre le

fonctionnement.

2.4.2 RSS-102 statement

This device is designed and manufactured not to exceed the emission limits for exposure to

radio frequency (RF) energy set by Industrial Canada and meets the requirements for radiation

exposure limits set forth for an uncontrolled environment.

In order to avoid the possibility of exceeding the Industrial Canada radio frequency exposure

limits, human proximity to the equipment shall not be less than 2.58 m

Cet appareil est conçu et fabriqué pour ne pas dépasser les limites d'émission pour l'exposition

à la fréquence radio (RF) de l'énergie fixé par l'Industrielle Canada et répond aux exigences en

matière de limites d'exposition aux rayonnements définies pour un environnement non

contrôlé.

Afin d'éviter la possibilité de dépasser les limites d'exposition aux fréquences radio

industrielle du Canada, la proximité humaine pour l'appareil nedoit pas être inférieure à 2.58

m

2.5 Japanese Regulatory Compliance

2.5.1 VCCI

2.5.1VCCI

Product complies with VCCI Class B by Information Technology Equipment (ITE).

The preceding translates as follows:

This is a Class B product based on the standard of the Voluntary Control Council for

Interference by Information Technology Equipment (VCCI).If this product is used

Near a radio or television receiver in a domestic environment. It may cause radio

Interference.Install and use the equipment according to the instruction manual.

2 Regulatory Compliance Information

2-8

Huawei Proprietary and Confidential

Issue (01)

2.6 CISPR 22 Compliance

Product complies with CISPR 22 for Class B by the ITE.

2.7 China RoHS hazardous substance table

This products described in this guide complies with “the Administration on the Control of Pollution Caused by

Electronic Information Products” which is also called China RoHS

部件名称

产品中有害物质或元素的名称及含量

镉

铅

汞

六价铬

多溴联苯

多溴联苯醚

Frame

〇

╳

〇

Alloy Parts

〇

╳

〇

Power Adapter

〇

╳

〇

Metal Fittings

〇

PCBA

〇

╳

〇

Capacitor

〇

╳

〇

Other electronics

〇

╳

〇

Screen

〇

Solder

〇

╳

〇

Cable

╳

〇

Plastic and Polymer

〇

╳

〇

╳

Label

〇

Battery

〇

〇：表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363-2006 标准规定的限量要求以下。

2 Regulatory Compliance Information

Issue (01)

Huawei Proprietary and Confidential

2-9

╳：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T11363-2006 标准规定的限量要

求。

2.8 India RoHS hazardous substance table

This products described in this guide complies with the “e-waste (Management and Handling) Rules, 2011”of

India which is also called India RoHS.

Part Descriptions

Restricted Substances in Product

Cd

Pb

Hg

Cr(VI)

PBBs

PBDEs

Frame

〇

╳

〇

Alloy Parts

〇

╳

〇

Power Adapter

〇

╳

〇

Metal Fittings

〇

PCBA

〇

╳

〇

Capacitor

〇

╳

〇

Other electronics

〇

╳

〇

Screen

〇

Solder

〇

╳

〇

Cable

╳

〇

Plastic and Polymer

〇

╳

〇

╳

Label

〇

Battery

〇

〇: indicates that the content of the toxic and hazardous substance in all the Homogeneous Materials of the part is

below the concentration limit requirement as described in the e-waste (Management and Handling) Rules, 2011.

╳: indicates that the content of the toxic and hazardous substance in at least one Homogeneous Material of the

2 Regulatory Compliance Information

2-10

Huawei Proprietary and Confidential

Issue (01)

part exceeds the concentration limit requirement as described in S in the e-waste (Management and Handling)

Rules, 2011.

2.9 Other Markets

For relevant compliance information/documentation for markets not mentioned above,

please contact Huawei representative

BTS3911E

V100R011C00

Hardware Description

Issue

Draft A

Date 2015-07-30

HUAWEI TECHNOLOGIES CO., LTD.

No part of this document may be reproduced or transmitted in any form or by any means without prior written

consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and the

customer. All or part of the products, services and features described in this document may not be within the

purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,

and recommendations in this document are provided "AS IS" without warranties, guarantees or representations

of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: http://www.huawei.com

Email: support@huawei.com

Issue Draft A (2015-07-30) Huawei Proprietary and Confidential

i

1 About This Document

Issue Draft A (2015-07-30) Huawei Proprietary and Confidential

1

2 Changes in BTS3911E Hardware Description

This section describes the changes in BTS3911E Hardware Description.

Draft A (2015-07-30)

This is a draft.

BTS3911E

Hardware Description 2 Changes in BTS3911E Hardware Description

Issue Draft A (2015-07-30) Huawei Proprietary and Confidential

2

3 BTS3911E Equipment

This section describes the appearance, ports, and indicators of a BTS3911E.

3.1 Appearance

3.2 Ports and Indicators

BTS3911E

Hardware Description 3 BTS3911E Equipment

Issue Draft A (2015-07-30) Huawei Proprietary and Confidential

3

3.1 Appearance

This section describes the appearance and dimensions of a BTS3911E.

Figure 3-1 shows the appearance of BTS3911E.

Figure 3-1 BTS3911E appearance

Figure 3-2 shows its dimensions.

BTS3911E

Hardware Description 3 BTS3911E Equipment

Issue Draft A (2015-07-30) Huawei Proprietary and Confidential

4

Figure 3-2 BTS3911E dimensions

3.2 Ports and Indicators

This section describes the BTS3911E ports (on the bottom or the side maintenance cavity) and

indicators (on the bottom).

Positions

Figure 3-3 shows the positions of the BTS3911E ports and indicators.

BTS3911E

Hardware Description

3 BTS3911E Equipment

Issue Draft A (2015-07-30) Huawei Proprietary and Confidential

5

Figure 3-3 Positions of the BTS3911E ports and indicators

(1) GPS (2) TF card (3) USB WIFI (4) ANT D

(5) ANT C (6) ANT B (7) ANT A (8) Ground terminal

(9) EXT_ALM (10) CPRI (11) PWR (12) FE/GE0

(13) FE/GE1 (14) DBG (15) FE/GE2 (16) FE/GE3

Ports

Table 3-1 describes the BTS3911E ports.

Table 3-1 BTS3911E ports

Port Description

PWR Power input port

BTS3911E

Hardware Description 3 BTS3911E Equipment

Issue Draft A (2015-07-30) Huawei Proprietary and Confidential

6

Port Description

CPRI Reserved port

EXT-ALM Dry contact alarm port for monitoring the alarm status of external

devices

TF Anchor slot for the trans flash card (TF card, also called micro SD

card) for BTS3911E deployment

DBG Commissioning port

FE/GE0 Electrical port

FE/GE1 Electrical port

FE/GE2 Optical port

FE/GE3 Optical port

ANT A Port A used to transmit and receive RF signals

ANT B Port B used to transmit and receive RF signals

ANT C Port C used to transmit and receive RF signals

ANT D Port D used to transmit and receive RF signals

GPS Port for connecting GPS antennas to achieve clock synchronization

USB WIFI Wi-Fi port for zero-touch maintenance and deployment

Ground terminal

Indicators

A BTS3911E has four indicators. Table 3-2 describes the indicators.

NOTE

The BTS3911E indicators can be turned on or off by following instructions provided in BTS3911E Site

Maintenance Guide.

Table 3-2 BTS3911E indicators

Indicator Meaning Status Description

RUN Operating status Steady green There is power supply, but

the BTS3911E is faulty.

Off There is no power supply, or

the BTS3911E is faulty.

BTS3911E

Hardware Description 3 BTS3911E Equipment

Issue Draft A (2015-07-30) Huawei Proprietary and Confidential

7

Indicator Meaning Status Description

Blinking green (on for 1s

and off for 1s)

The BTS3911E is running

properly.

Blinking green (on for

0.125s and off for

0.125s)

Software is being loaded to

the BTS3911E, or the

BTS3911E is not started.

ALM Alarm status Steady red Alarms are generated, and

the BTS3911E must be

replaced.

Blinking red (on for 1s

and off for 1s)

An alarm is generated. The

alarm may be caused by

faults in related modules or

ports. Therefore, the

necessity for BTS3911E

replacement is uncertain.

Off No alarm is generated.

ACT Service status Steady green The BTS3911E is activated

and working properly.

Off The BTS3911E is

deactivated or is not

running.

Blinking green (on for

0.125s and off for

0.125s)

The operation and

maintenance link (OML) is

disconnected.

Blinking green (on for 2s

and off for 2s)

Services are not available,

for example, the cells or

service links are not ready

for service provisioning.

Blinking green (on for 1s

and off for 1s)

The BTS3911E is being

tested, for example, in an

RRU VSWR test by using a

USB flash drive.

VSWR VSWR alarm status Steady red A VSWR alarm is

generated, and the

BTS3911E may be

replaced.

Off No VSWR alarm is

generated.

BTS3911E

Hardware Description

3 BTS3911E Equipment

Issue Draft A (2015-07-30) Huawei Proprietary and Confidential

8

4 BTS3911E Cables

This section describes the appearance, core wire types, and installation positions of BTS3911E

cables.

4.1 Cable List

4.2 PGND Cable

4.3 Power Cable

4.4 FE/GE Ethernet Cable

4.5 FE/GE Fiber Optic Cable

4.6 Alarm Cable

4.7 (Optional) RF Jumper

BTS3911E

Hardware Description 4 BTS3911E Cables

Issue Draft A (2015-07-30) Huawei Proprietary and Confidential

9

4.1 Cable List

This section describes the connection positions and connector types of BTS3911E cables.

BTS3911E cables include PGND cables, power cables, transmission cables, RF jumpers, GPS

signal cables, and alarm cables, as listed in Table 4-1.

Table 4-1 BTS3911E cable list

Cable One End The Other End

Connector Installation

Position

(Equipment/

Module/Port)

Connector Installation Position

(Equipment/

Module/Port)

4.2 PGND

Cable

OT terminal

(M6, 6 mm

2

)

Ground terminal

of the BTS3911E

OT terminal

(M8, 6 mm

2

)

External ground bar

4.3 Power

Cable

Tool-less

female

connector

AC-EPC1

(pressfit

type)

PWR port on the

BTS3911E

maintenance

cavity

Depends on the

external power

supply

equipment.

External power

supply equipment

4.4 FE/GE

Ethernet

Cable

RJ45

connector

FE/GE0 or FE/

GE1 port on the

BTS3911E

maintenance

cavity

RJ45 connector External

transmission

equipment

RJ45 connector FE/GE0 or FE/GE1

port on the

BTS3911E

maintenance cavity

4.5 FE/GE

Fiber Optic

Cable

DLC

connector

FE/GE2 or FE/

GE3 port on the

BTS3911E

maintenance

cavity

FC, LC, or SC

connector

External

transmission

equipment

DLC connector FE/GE2 or FE/GE3

port on the

BTS3911E

maintenance cavity

4.6 Alarm

Cable

RJ45

connector

EXT-ALM port

on the BTS3911E

maintenance

cavity

Depends on the

external

monitored

equipment

External monitored

equipment

BTS3911E

Hardware Description 4 BTS3911E Cables

Issue Draft A (2015-07-30) Huawei Proprietary and Confidential

10

4.7

(Optional)

RF Jumper

Smart-type N

male

connector

ANT A, ANT B,

ANT C, or ANT D

port on the

BTS3911E

Type N male

connector

External antenna

system

4.2 PGND Cable

A PGND cable connects the ground terminal of a BTS3911E to a ground bar, providing ground

protection for the BTS3911E.

Appearance

Figure 4-1 shows the appearance of a PGND cable with connectors.

Figure 4-1 PGND cable appearance

(1) OT terminal

Cable Description

Table 4-2 describes the BTS3911E PGND cable.

Table 4-2 PGND cable description

Cable One End The Other End Color

PGND cable OT terminal (M6, 6

mm

2

)

OT terminal (M8, 6

mm

2

)

Yellow and green or

green

4.3 Power Cable

A power cable connects the BTS3911E to the external AC power supply equipment.

BTS3911E

Hardware Description

4 BTS3911E Cables

Issue Draft A (2015-07-30) Huawei Proprietary and Confidential

11

Huawei BTS3911E User Manual

Contents

1 About This Document

Hardware Description 2 Changes in BTS3911E Hardware Description

3 BTS3911E Equipment

3.1 Appearance

3.2 Ports and Indicators

4 BTS3911E Cables

4.1 Cable List

4.2 PGND Cable

4.3 Power Cable