Huawei ATU-LX3 User Manual
ATU-LX3
Quick Start Guide
Your Device at a Glance
1
2
3
4
5
6
7
8
9
10
14
13
12
11
Before you start, let's take a look at your new device.
l To power on your device, press and hold the power button
until the screen turns on.
l To power off your device, press and hold the power button,
and then touch .
l To restart your device, press and hold the power button,
and then touch .
l Press and hold the power button for 10 or more seconds to
forcibly restart your device.
Rear camera Front camera
Status indicator Card tray
Infrared sensor Micro-USB port
Speaker Power button
Volume button Earpiece
Smart Sele
Butterighting Flash
1
Secondary microphone Headset jack
l To force your device to restart, press and hold the
power button until your device vibrates.
2
Getting Started
l Ensure that the card is correctly aligned and that the
card tray is level when you insert it into your device.
l Be careful not to scratch your device or hurt yourself
when using the eject pin.
l Store the eject pin out of the reach of children to
prevent accidental swallowing or injury.
l Do not use cut or modied SIM or microSD cards with
your device as these may not be recognized and could
damage the card tray (slot).
Follow the instructions in the following gures to set up your
device. Please use the eject pin included.
Dual-SIM:
3
Loading...