HTC 2PYB200 User Manual

Safety and

regulatory guide

2 Safety and regulatory guide

Please read before proceeding

THE BATTERY IS NOT FULLY CHARGED WHEN YOU TAKE THE
DEVICE OUT OF THE BOX.

Privacy restrictions

Some countries require full disclosure of recorded telephone
conversations.

Important health information and safety
precautions

READ THE FOLLOWING WARNINGS AND INFORMATION
BEFORE USE OF THE PRODUCT AND FOLLOW ALL PRODUCT
SAFETY AND OPERATING INSTRUCTIONS. FAILURE TO DO SO
MAY CAUSE BODILY INJURY, ELECTRIC SHOCK, FIRE, AND
OTHER DAMAGE.

Electrical safety

 Do not attempt to disassemble the phone or its accessory. Only

qualified personnel must service or repair the phone or its
accessories.

 Do not connect with incompatible products or accessories.
 Do not touch the SIM card’s metal connectors as this may cause

an electrostatic discharge.

CAUTION

result in an electric shock to your device.
This product is equipped with a USB Cable for connecting with
desktop or notebook computer. Be sure your computer is properly
grounded (earthed) before connecting this product to the
computer. The power supply cord of a desktop or notebook
computer has an equipment-grounding conductor and a
grounding plug. The plug must be plugged into an appropriate
outlet which is properly installed and grounded in accordance with
all local codes and ordinances.

Safety precautions for power supply unit

 Use the correct external power source

A product should be operated only from the type of power
source indicated on the electrical ratings label.
This product should be charged only with the following power
supply.

AC adapter:

HTC, TC P3000-US

: Connecting to improperly grounded equipment can

Safety and regulatory guide 3

WARNING

: To reduce risk of fir

e or burns, do not

Your device should only be operated with the HTC qualified
battery pack, model number
range: 32 °F to 104 °F (0 °C to 40 °C)

 Handle battery packs carefully

This product contains a Lithium-ion polymer or Lithium-ion battery.
There is a risk of fire and burns if the battery pack is handled
improperly.

disassemble, crush, puncture, short external
contacts or circuits, expose to temperature above
40 °C (104 °F), or dispose of in fire or water.

B2PYB100

. Operating temperature

 Additional precautions

 Keep the device dry and away from water or any liquid as it

may cause a short circuit.

 The phone should only be connected to products that bear

the USB-IF logo or have completed the USB-IF compliance
program.

 Only use the battery with a charging system that has been

qualified with the system per this standard, IEEE-Std-1725.
Use of an unqualified battery or charger may present a risk of
fire, explosion, leakage or other hazard.

 Avoid dropping the phone. If the phone or battery is dropped,

especially on a hard surface, and the user suspects damage,
take it to a service centre for inspection.

 If the battery leaks:



Do not allow the leaking fluid to come in contact with skin or
clothing. If already in contact, flush the affected area
immediately with clean water and seek medical advice.



Do not allow the leaking fluid to come in contact with eyes. If
already in contact, DO NOT rub; rinse with clean water
immediately and seek medical advice.



Take extra precautions to keep a leaking battery away from
fire as there is a danger of ignition or explosion.

4 Safety and regulatory guide

Safety precautions related to weather, temperature and
moisture

Keep this product away from water, excessive moisture and

extreme temperatures. Avoid hot areas. The product should be
kept away from heat sources such as radiators, heat registers,
stoves, or other products that produce heat. Do not leave the
product inside a vehicle or in places where the temperature may
exceed 40 °C (104 °F), such as on a car dashboard, window sill, or
behind glass that is exposed to direct sunlight or strong ultraviolet
light for extended periods of time. This may damage the product,
overheat the battery, or pose a risk to the vehicle.
Avoid wet areas. Never use the product in rain, or near washbasins
or other wet or high humidity locations, such as locations where
the device may be exposed to sweat or other liquids. If your
product gets wet, do not try to dry the product with the use of an
oven, dryer or microwave, as this may damage your product.
Avoid using your device after a dramatic change in temperature
and/or humidity ranges, as condensation may form on or within
the device. To avoid damaging the device, allow sufficient time for
the moisture to evaporate before use.
Do not use your phone if it has been damaged.

Prevention of hearing loss

or other audio devices.

Using your phone while flying

Use of cell phones may be restricted on aircraft. For your safety
and the safety of other passengers, always follow crew
instructions regarding the use of your phone.

Environmental hazards

When in any area with a potentially explosive atmosphere or
where flammable materials exist, the product should be turned off
and the user should obey all signs and instructions.

Road safety

When behind the wheel, driving safely should always be your first
priority. According to the National Highway Traffic Safety
Administration (NHTSA), scientific research indicates that using a

CAUTION

: Permanent hearing loss may occur if
earphones or headphones are used at high volume for
prolonged periods of time.
Turn down the device volume before using headphones