Page 1
SAFETY DATA SHEET – HSM SHREDDER OIL
Spectrum Lubricants Corporation
500 Industrial Park Drive
Selmer, TN 38375-3276
United States of America
Product Information
MSDS Requests: (800) 264-6457 or +17316454972
Technical Information: (800) 264-6457 or +17316454972
General Information: vswedley@spectrumcorporation.com
Emergency Response
North America: CHEMTREC (800) 424-9300 after 5:00pm CST Or +17035273887
Health Emergency
USA: (800) 264-6457 or +17316454972
1. IDENTIFICATION
1.1. PRODUCT IDENTIFIER USED ON LABEL:
1.1.1. HSM SHREDDER OIL
1.1.2. HSM314, HSM315, HSM316
1.2. OTHER MEANS OF IDENTIFICATION:
1.2.1. ANTI-WEAR ISO32 Hydraulic Oil
1.3. RECOMMENDED USE OF THE CHEMICAL AND RESTRICTIONS ON USE;
1.3.1. PETROLEUM LUBRICATING OIL
1.3.2. NO OTHER USES RECOMMENDED
1.4. NAME, ADDRESS, AND TELEPHONE NUMBER OF THE CHEMICAL MANUFACTURE R, IMPORTER, OR OTHER
RESPONSIBLE PARTY:
1.4.1.
1.5. EMERGENCY PHONE NUMBER:
1.5.1.
Page 1 of 7
Page 2
SAFETY DATA SHEET – HSM SHREDDER OIL
COMPONENTS
CAS Number
EU Number
Concentration
(%)
Distillates (petroleum), hydrotreated
heavy paraffinic
64742-54-7
265-157-1
90-100
Skin:
Wash skin with soap and warm water. Wash clothing before re-use.
Eye:
If splashed into eyes flush eyes with clear water for five (5) minutes.
Inhalation:
Remove person to fresh air and keep comfortable for breathing. Call a poison
center/doctor if you feel unwell
Ingestion:
If ingested, do not induce vomiting. Call a physician.
2. HAZARD(S) IDENTIFICATION
2.1. CLASSIFICATION OF THE CHEMICAL IN ACCORDANCE WITH PARAGRAPH (d) of §1910.1200:
2.1.1. Acute Inhalation Category 4
2.2. Signal Word:
2.2.1. Warning
2.3. Symbol:
2.4. Hazard Statements:
2.4.1. Harmful if Inhaled
2.5. Precautionary Statements:
2.5.1. Prevention:
2.5.1.1. Avoid breathing mist and spray.
2.5.1.2. Use only outdoors or in a well-ventilated area.
2.5.2. Response:
2.5.2.1. If inhaled: Remove person to fresh air and keep comfortable for breathing.
2.5.2.2. Call a poison center/doctor if you feel unwell.
3. Composition/ information on ingredients
3.1. The chemical name and concentration (exact percentage) or concentration ranges of all ingredients which are
classified as health hazards in accordance with paragraph (d) of §1910.1200
3.1.1.
4. FIRST AID MEASURES
4.1.
Page 2 of 7
Page 3
SAFETY DATA SHEET – HSM SHREDDER OIL
5. FIRE FIGHTING MEASURES
5.1. Flash Point: 385F (196C)
5.2. Protective Equipment/Fire Fighting Instructions:
5.2.1. For fires involving this material, do not enter any enclosed or confined fire space without proper
protective equipment, including self-contained breathing apparatus.
5.3. Extinguishing Media:
5.3.1. Use water fog, foam, dry chemical or carbon dioxide (CO
5.4. Special Firefighting Procedures:
5.4.1. Cool exposed containers with water spray.
5.5. Unusual Fire and Explosion Hazards:
5.5.1. Pressure increase in over heated closed containers. Cool containers with water spray.
) to extinguish flames.
2
6. ACCIDENTAL RELEASE MEASURES
6.1. Spill Procedures:
6.1.1. Remove ignition sources. Recover Liquid. Add absorbent to spill area. Ventilate confined spaces. Advise
authorities if product enters sewers, etc.
6.2. Waste Disposal:
6.2.1. Assure conformity with applicable disposal regulations. Dispose of absorbed material at approved waste
site
6.3. Precautionary Measures:
6.3.1. Do not get in eyes, on skin, or on clothing. Do not taste or swallow. Wash thoroughly after handling.
6.3.2. Avoid contaminating soil or releasing this material into sewage and drainage systems and bodies of water.
7. HANDLING AND STORAGE
7.1. HANDLING
7.1.1. Empty containers retain product residue (solid, liquid, and/or vapor) and can be dangerous. Do not
pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, static
electricity, or other sources of ignition. They may explode and cause injury or death. Empty containers
should be completely drained, properly closed, and promptly returned to a drum re-conditioner or
disposed of properly.
7.2. STORAGE
7.2.1. Keep container closed when not in use. Do not store with strong oxidizing agents. Do not store at
elevated temperatures.
Page 3 of 7
Page 4
SAFETY DATA SHEET – HSM SHREDDER OIL
9.1. Appearance/Odor:
Amber colored liquid with
mild hydrocarbon odor.
9.2. Odor Threshold:
No data available
9.3. pH:
No data available
9.4. Boiling Point:
Wide range
9.5. Melting Point:
No data available
9.6. Solubility (H₂0):
Negligible
9.7. Specific Gravity:
0.870 @ 15.6°C
9.8. Density:
7.25 lbs/gal
9.9. Octanol/H₂0 Coeff.:
No data available
9.10. Evaporation Rate (BUAC=1):
<1
9.11. Molecular Weight:
No data available
9.12. Decompostion Temp:
No data available
9.13. Auto Ignition:
No data available
9.14. Lower Flammability Limit:
No data available
9.15. Flash Point:
385F (196C)
9.16. Upper Flammability Limit:
No data available
9.17. Vapor Density (Air=1):
>1
9.18. Vapor Pressure:
<1mmHg @ 20°C
9.19. VOC:
Nill
9.20. Flammability Class:
Not classified
8. EXPOSURE CONTROLS/ PERSONAL
PROTECTION
8.1. Component Exposure Limits:
8.1.1. Distillates (petroleum), hydrotreated heavy paraffinic
8.1.1.1. ACGIH TLV: 5mg/m³ (oil mist) TWA
8.1.1.2. OSHA PEL: 5mg/m³ (oil mist) TWA
8.2. Engineering Controls:
8.2.1. Ventilate as needed to comply with exposure limit
8.3. Eye Protection:
8.3.1. Use goggles/face shield to avoid eye contact
8.4. Glove Protection:
8.4.1. Use impervious gloves to avoid repeated/prolonged skin contact.
8.5. Work/Hygienic Practices:
8.5.1. If clothing becomes contaminated, change to fresh clean clothing. Do not wear until thoroughly
laundered.
9. PHYSICAL AND CHEMICAL PROPERTIES
Page 4 of 7
Page 5
SAFETY DATA SHEET – HSM SHREDDER OIL
9.21. Viscosity @ 40°C
32cSt (32 mm²/s)
9.22. Viscosity @ 100°C
5cSt (5 mm²/s)
10. STABILITY AND REACTIVITY
10.1. Reactivity:
10.1.1. Material does not pose a significant reactivity hazard.
10.2. Chemical Stability:
10.2.1. Stable
10.3. Incompatibility/Conditions to avoid:
10.3.1. Avoid strong oxidants
10.4. Possibility of Hazardous Reactions:
10.4.1. Will not undergo hazardous polymerization.
10.5. Hazardous Decomposition Products:
10.5.1. Partial burning produces fumes, smoke and carbon monoxide
11. TOXICOLOGY INFORMATION
11.1. Likely Routes of Exposure:
11.1.1. Ingestion, Inhalation, Eye contact, Skin contact.
11.2. Acute Effects:
11.2.1. Inhalation: Harmful if inhaled. May cause respiratory irritation.
11.2.2. Eye Contact: Expected to be minimal/no eye irritation.
11.2.3. Skin Contact: Expected to be minimal/no skin irritation.
11.2.4. Ingestion: Expected to be low ingestion hazard.
11.3. Component Data/ Analysis
11.3.1. Distillates (petroleum), hydrotreated heavy paraffinic
11.3.1.1. Oral (LD50) (Rat): Acute: >5000 mg/kg
11.3.1.2. Inhalation (LC50) (Rat): Acute: 2.18 mg/l (4hr)
11.3.1.3. Dermal (LD50) (Rabbit): >5000 mg/kg
11.4. Sensitization:
11.4.1. Based on best current information, there are no known human effects.
11.5. Carcinogenicity:
11.5.1. There is no known information on carcinogenic components.
11.6. Mutagenicity:
11.6.1. Not expected to be mutagenicic.
11.7. Reproductive Toxicity:
11.7.1. Based on best current information, there are no known human effects.
11.8. Teratogenicity:
11.8.1. Based on best current information, there are no known human effects.
12. ECOLOGICAL INFORMATION
Page 5 of 7
Page 6
SAFETY DATA SHEET – HSM SHREDDER OIL
12.1. Ecotoxicity
12.1.1. An environmental fate analysis is not available for this specific product. Plants and animals may
experience harmful or fatal effects when coated with petroleum products. Petroleum-based (mineral)
lubricating oils normally will float on water. In stagnant or slow-flowing waterways, an oil layer can cover a
large surface area. As a result, this oil layer might limit or eliminate natural atmospheric oxygen transport
into the water. With time, if not removed, oxygen depletion in the waterway may be sufficient to cause a
fish kill or create an anaerobic environment.
12.2. Environmental Fate
12.2.1. Analysis for ecological effects has not been conducted on this product. However, if spilled, this product
and any contaminated soil or water may be harmful to human, animal, and aquatic life. Also, the coating
action associated with petroleum and petroleum products can be harmful or fatal to aquatic life and
waterfowl.
13. DISPOSAL CONSIDERATIONS
13.1. Waste Disposal:
13.1.1. Assure conformity with applicable disposal regulations. Dispose of absorbed material at approved waste
site.
14. TRANSPORTATION INFORMATION
The shipping description below may not represent requirements for all modes of
transportation, shipping methods or locations outside of the United States.
14.1. ROAD AND RAIL
14.1.1. DOT: NOT REGULATED
14.2. VESSEL
14.2.1. IMDG: NOT REGULATED
14.3. AIR
14.3.1. IATA: NOT REGULATED
15. REGULATORY INFORMATION
15.1. TSCA Inventory
15.1.1. This product and/or its components are listed on the Toxic Substances Control Act (TSCA) inventory.
15.2. SARA 302/304 Emergency Planning and Notification
15.2.1. No components were identified.
15.3. SARA 311/312 Hazard Identification
15.3.1. Acute (Immediate) Health Hazard
15.4. SARA 313 Toxic Chemical Notification and Release Reporting
15.4.1. : No components were identified.
15.5. CERCLA
15.5.1. No components were identified.
15.6. Clean Water Act (CWA)
15.6.1. This material is classified as an oil under Section 311 of the Clean Water Act (CWA) and the Oil Pollution
Act of 1990 (OPA). Discharges or spills which produce a visible sheen on waters of the United States, their
Page 6 of 7
Page 7
SAFETY DATA SHEET – HSM SHREDDER OIL
HAZARD RANKINGS
HMIS NFPA
HEALTH HAZARD
1
HEALTH HAZARD
1
FIRE HAZARD
1
FIRE HAZARD
1
PHYSICAL HAZARD
0
INSTABILITY/REACTIVITY
0
Personal Protection
B
adjoining shorelines, or into conduits leading to surface waters must be reported to the EPA's National
Response Center at (800) 424-8802.
15.7. California Proposition 65:
15.7.1. The product does not contain chemicals known to the state of California to cause cancer, birth defects,
or any other reproductive harm.
15.8. New Jersey Right-to-Know Label
15.8.1. Petroleum Oil
16. OTHER INFORMATION
16.1.
16.2. Date of preparation: 04/15/2014
16.3. Revised: 01/27/2016
16.4. MANUFACTURER DISCLAIMER:
16.4.1. The data presented herein is based upon tests and information, which we believe to be reliable.
However, users should make their own investigations to determine the suitability of the information for
their particular purpose
Page 7 of 7
Loading...