HSM 314 User Manual

SAFETY DATA SHEET –

Spectrum Lubricants Corporation

General Information: [e-mail]

Emergency Response

HSM SHREDDER OIL

1. IDENTIFICATION

1.1. PRODUCT IDENTIFIER USED ON LABEL:

1.1.1. HSM SHREDDER OIL

1.1.2. HSM PART # HSM314, HSM315, HSM316

1.2. OTHER MEANS OF IDENTIFICATION:

1.2.1. ANTI-WEAR ISO32 Hydraulic Oil

1.3. RECOMMENDED USE OF THE CHEMICAL AND RESTRICTIONS ON USE;

1.3.1. PETROLEUM LUBRICATING OIL

1.3.2. NO OTHER USES RECOMMENDED

1.4. NAME, ADDRESS, AND TELEPHONE NUMBER OF THE CHEMICAL MANUFACTURE R, IMPORTER, OR OTHER

RESPONSIBLE PARTY:

1.4.1.

500 Industrial Park Drive
Selmer, TN 38375-3276
United States of America

Product Information

MSDS Requests: [phone] or [phone]
Technical Information: [phone] or [phone]

1.5. EMERGENCY PHONE NUMBER:

1.5.1.

North America: CHEMTREC [phone] after 5:00pm CST Or [phone]

Health Emergency

USA: [phone] or [phone]

Page 1 of 7

SAFETY DATA SHEET –

COMPONENTS

CAS Number

EU Number

Concentration

(%)

Skin:

Wash skin with soap and warm water. Wash clothing before re-use.

Eye:

If splashed into eyes flush eyes with clear water for five (5) minutes.

center/doctor if you feel unwell

Ingestion:

If ingested, do not induce vomiting. Call a physician.

HSM SHREDDER OIL

2. HAZARD(S) IDENTIFICATION

2.1. CLASSIFICATION OF THE CHEMICAL IN ACCORDANCE WITH PARAGRAPH (d) of §1910.1200:

2.1.1. Acute Inhalation Category 4

2.2. Signal Word:

2.2.1. Warning

2.3. Symbol:

2.4. Hazard Statements:

2.4.1. Harmful if Inhaled

2.5. Precautionary Statements:

2.5.1. Prevention:

2.5.1.1. Avoid breathing dust/fume/gas/mist/vapors/spray.

2.5.1.2. Use only outdoors or in a well-ventilated area.

2.5.2. Response:

2.5.2.1. If inhaled: Remove person to fresh air and keep comfortable for breathing.

2.5.2.2. Call a poison center/doctor if you feel unwell.

3. Composition/ information on ingredients

3.1. The chemical name and concentration (exact percentage) or concentration ranges of all ingredients which are

classified as health hazards in accordance with paragraph (d) of §1910.1200

3.1.1.

Distillates (petroleum), hydrotreated
heavy paraffinic

64742-54-7 265-157-1 90-100

4. FIRST AID MEASURES

4.1.

Inhalation: Remove person to fresh air and keep comfortable for breathing. Call a poison

Page 2 of 7

SAFETY DATA SHEET –

HSM SHREDDER OIL

5. FIRE FIGHTING MEASURES

5.1. Flash Point: 405°F (207°C)

5.2. Protective Equipment/Fire Fighting Instructions:

5.2.1. For fires involving this material, do not enter any enclosed or confined fire space without proper

protective equipment, including self-contained breathing apparatus.

5.3. Extinguishing Media:

5.3.1. Use water fog, foam, dry chemical or carbon dioxide (CO

5.4. Special Firefighting Procedures:

5.4.1. Cool exposed containers with water spray.

5.5. Unusual Fire and Explosion Hazards:

5.5.1.

Pressure increase in over heated closed containers. Cool containers with water spray.

) to extinguish flames.

2

6. ACCIDENTAL RELEASE MEASURES

6.1. Spill Procedures:

6.1.1. Remove ignition sources. Recover Liquid. Add absorbent to spill area. Ventilate confined spaces. Advise

authorities if product enters sewers, etc.

6.2. Waste Disposal:

6.2.1. Assure conformity with applicable disposal regulations. Dispose of absorbed material at approved waste

site

6.3. Precautionary Measures:

6.3.1. Do not get in eyes, on skin, or on clothing. Do not taste or swallow. Wash thoroughly after handling.

6.3.2. Avoid contaminating soil or releasing this material into sewage and drainage systems and bodies of water.

7. HANDLING AND STORAGE

7.1. HANDLING

Empty containers retain product residue (solid, liquid, and/or vapor) and can be dangerous. Do not

7.1.1.

pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks, static
electricity, or other sources of ignition. They may explode and cause injury or death. Empty containers
should be completely drained, properly closed, and promptly returned to a drum re-conditioner or
disposed of properly.

7.2. STORAGE

Keep container closed when not in use. Do not store with strong oxidizing agents. Do not store at

7.2.1.

elevated temperatures.

Page 3 of 7