HPE D2220sb Storage Blade
Overview
HPE D2220sb Storage Blade
Do you need a direct attached or shared storage solution within your BladeSystem enclosure?
The D2220sb Storage Blade delivers direct attached storage for c
small form factor (SFF) SAS or SATA hard disk drives or SAS/SATA SSDs. The enclosure backplane provides a PCI Express
connection to the adjacent c
D2220sb Storage Blade features an onboard Smart Array P420i controller with 2GB flash
performance and data protection. Up to eight D2220sb storage devices can be supported off a single BladeSystem c7000
enclosure
Two ways to create shared storage with the D2220sb
StoreVirtual VSA software to turn the D2220sb into an iSCSI SAN for use by all servers in the enclosure and any server on
the network.
is installed in a virtual machine on a VMware ESX host server adjacent to the D2220sb.
HPE
RAID for storage failover, thin provis
or to other BladeSystem enclosures by adding additional D2220sb Storage Blades and
VSA licenses. A cost effective bundle of
the D2220sb Storage Blade and a
P4300 or P4500 systems externally and manage everything via a single pane of glass.
The
Gateway Storage Blade
enclosure.
-Class Gen9 blade servers, with support for up to twelve hot plug
-Class server blade and enables high performance storage access without any additional cables. The
-backed write cache, for increased
for up to 192 TB of capacity.
HPE
HPE StoreVirtual VSA software
StoreVirtual VSA turns the D2220sb into a scalable and robust iSCSI SAN, featuring storage clustering for scalability, Network
ioning, snapshots, remote replication, and cloning. Expand capacity within the same enclosure
HPE
HPE StoreVirtual VSA license makes purchasing convenient. If storage needs increase, add HPE
HPE 3840 Gateway Storage Blade is a flexible storage server solution for BladeSystem environments. Combine the HPE 3840
with the D2220sb Storage Blade to enable file serving and iSCSI shared storage inside the BladeSystem
Page
HPE D2220sb Storage Blade
6. Product information tag
Hot-plug drive drawer release button
Storage blade release latch*
Storage blade release button*
* Removing the storage blade from the enclosure removes
power from the hard drives.
-plug drive drawer handle
• Support for BL460 Gen9 Server Blade
• Support for BL660 Gen9 Server Blade
• Support for WS460 Gen9 Graphics Server Blade
• Support for expanded menu of hard disk drives (HDDs) and solid state drives (SSDs)
HPE D2220sb Storage Blade
Product Highlights
Features of the D2220sb include:
StoreVirtual VSA software to create a robust shared storage environment inside
Mix and Match of Hard
Drive Types
c3000 requires 6 fans, storage blade is not supported with 4 fan configuration.
be configured for RAID levels 0, 1, 1 + 0, 5, and 6 (RAID ADG)
necessary to install and maintain the HPE server storage.
Key Features
SFF (SAS/SATA/SAS SSD/SATA SSD) support – Delivering data transfer rates up to 6 Gb/s for SAS,
• Support for up to twelve (12) hot plug SFF SAS/SATA/SAS SSD/SATA SSD disk drives in a
half-height blade
• Internal Smart Array P420i with 2 GB flash-backed write cache
• Simple configuration and setup with HPE Smart Storage Administrator (HPE SSA)
• Easy to maintain and troubleshoot with industry standard management tools including HPE
System Insight Manager
• Use with HPE
BladeSystem enclosures
• Protected by HPE Services and a worldwide network of Hewlett Packard Enterprise
Authorized Channel Partners. Three-year parts limited global warranty. Certain restrictions
and exclusions apply
D2220sb supports mixing of different drive types (SAS/SATA, SSD/HDD) in a single enclosure.
However, please note also that an array can be created across only one drive type.
Universal hot plug Hard
Drive
Form factor is for use across multiple HPE ProLiant servers, disk enclosures and storage systems. With
compatibility across many enterprise platforms, you are free to deploy and re-deploy these drives to
quickly deliver increased storage capacity, migrate data between systems, and easily manage spare
Front panel LEDs indicate drive activity and system health status.
Density The D2220sb fits into a half height bay on the BladeSystem c3000 and c7000 Enclosure.
NOTE: c7000 requires 10 fans, storage blade is not supported with 8 fan configuration.
Fault Tolerance Using the internal Smart Array P420i controller with 2 GB flash-backed write cache, the D2220sb can
Manageability All Smart Array products utilize a standard set of management and utility software. These tools
minimize Total Cost of Ownership (TCO) by reducing training requirements and technical expertise
Fault Prevention The following features offer detection of possible failures before they occur, allowing preventive action
to be taken:
• S.M.A.R.T.: Self Monitoring Analysis and Reporting Technology first developed at HPE detects
possible hard disk failure before it occurs, allowing replacement of the component before
failure occurs.
• Drive Parameter Tracking monitors drive operational parameters, predicting failure and
notifying the administrator.
Dynamic Sector Repairing continually performs background surface scans on the hard disk
HPE D2220sb Storage Blade
D2220sb Blade server support matrix
ProLiant (SPP) 2015.04 provides all the necessary updates for support of D2220sb with BL460c Gen9.
VMware ESX: 4.1, ESXi 5.0, 5.1, 5.5, 6.0
visit our Support Matrix at: http://www.hp.com/go/supportos.
Allows for management of multiple arrays over a secure internet connection from anywhere in
• Runs offline for all supported Operating Systems and runs online for Windows and Linux. For
drives during inactive periods and automatically remaps bad sectors, ensuring data integrity.
• Smart Array Cache Tracking monitors integrity of controller cache, allowing pre-failure
preventative maintenance.
• Environment Tracking for External Storage System: Monitors fan speed and cabinet
temperature of ProLiant Storage System and newer HPE storage enclosures.
No of D2220sb
or Half Height
Storage blades
Supported
Half 1 No n/a n/a
Pass Thru Card
Required
Mezz slot to
support 1
Thru Card
st
Pass
Mezz slot to
support 2
Thru Card
nd
Pass
*NOTE: For BL465c Gen8 , SPLD/CPLD FW 0x40 or higher is required to support D2220sb.
** NOTE: BL460c Gen9 and WS460 Gen9 must use the integrated B140i SATA controller or Smart Array P246br for storage
internal to the server. Minimum list of firmware versions required for installation of D2220sb: Smart Array P246br 2.14,
Smart Array P420i (D2220sb controller) 6.34, D2220sb 1.02, BIOS 1.32, Intelligent Provisioning 2.10. HPE Service Pack for
Operating Systems Windows Server: 2008 R2, 2012
Red Hat Enterprise: RHEL5, RHEL6
SLES (x86): SLES10, SLES11
NOTE: For more information on HPE's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your server, please
Software Suite
Systems Insight Manager
• Powerful server and server options/storage manager tool
• Monitors over 1,200 system wide parameters
• Configuration/Diagnostic Utilities
HPE Smart Storage Administrator (HPE SSA)
• Powerful Web based configuration utility for all Smart Array controllers
• Provides a graphical view of HPE drive array configurations
•
the world
• Easy to use Wizards for configuration
HPE D2220sb Storage Blade
online configuration of NetWare, use CPQONLIN
HPE Option ROM Configuration for Arrays (ORCA)
• A simple method for managing logical drives during system power up by pressing F8 during
POST
• Allows the ability to create arrays, logical drives, and assign an online spare drive
• Allows the ability to view and delete logical drives
• Allows the ability to select the boot controller or advanced array configurations use HPE SSA
HPE Array Diagnostic Utility (ADU)
• In depth diagnostic and reporting utility for all Smart Array controllers
• Runs offline for all supported Operating Systems, and runs online for Windows and Linux