HPE P19779-B21 Getting Started Guide

QuickSpecs

HPE ProLiant DL360 Gen10 Server

Overview

HPE ProLiant DL360 Gen10 Server

Does your data center need a secure, performance driven dense server that you can confidently deploy for virtualization, database, or high security, agility and

The HPE ProLiant DL360 Gen10 Server supports the Intel® Xeon® Processor Scalable Family with up to 28 cores, plus 2666 MT/s HPE D HPE ProLiant DL360 Gen10 means business. Deploy this

platform for diverse workloads in space constrained environments

and maintain it with ease by automating the most essential server lifecycle management tasks with HPE OneView and HPE iLO 5.

8 SFF Front View – 8 SFF + 2 SFF Universal Media Bay option shown

Drive support label

Power On/Standby button and system power LED

Quick removal access panel

Health LED

Serial no. label pull tab

NIC status LED

Universal Media Bay Options:

UID button/LED

Option shown: +2 SFF SAS/SATA (total 10SFF)

USB 3.0 port

Option: +2 SFF NVMe drives

10.

iLO Service Port

Option: DVD-RW or DVD-ROM + Display port & USB 2.0 port Kit

11.

Standard 8 SAS/SATA/SSD drive bays

Option: +2 Dual uFF (4x M.2 cartridges)

Option: Display port + USB 2.0 port Kit + Blank

NOTE: Other options not shown.

NOTE: New! Rear drive option allows for an additional + 1 SFF or +1 Dual uFF (2x M.2 cartridges). NOTE:

-performance computing? The powerful 2P HPE ProLiant DL360 Gen10 is redefining dense compute by delivering unmatched expandability businesses want all packed in a dense 1U rack design.

DR4 SmartMemory supporting up to 3.0 TB max. With the added performance that 12 NVDIMMs and 10 NVMe brings, the

dense

System Insight Display (SID) module will include #5-9 above (will not include #10 - iLO Service Port).

Page

QuickSpecs

HPE ProLiant DL360 Gen10 Server

Overview

Page 2

Premium 10SFF NVMe Front View

Drive support label

NIC status LED

Quick removal access panel

UID button/LED

Serial no. label pull tab

USB 3.0 port

Power On/Standby button and system power LED

iLO Service Port

Health LED

10.

Max up to 10 NVMe drives (PCIe direct attached) or 8 SAS/SATA + 2 NVMe

NOTE: Other options not shown. NOTE: NOTE: System Insight Display (SID) module will include #4-8 above (will not include #9 - iLO Service Port).

4 LFF Front View – Standard 4 LFF shown

Drive support label

iLO Service Port

Quick removal access panel

USB 3.0 Port

Option: DVD-RW or DVD-ROM (blank shown)

UID button/LED

Serial no. label pull tab

10.

Power On/Standby button and system power LED

Option: Display port & USB 2.0 port Kit (blank shown)

11.

Health LED

Option: System insight Display (SID)* - standard shown

12.

NIC status LED

NOTE: *This option will lose #7 iLO Service Port.

13.

SAS/SATA/SSD drive bays

NOTE: New! Rear drive option allows for additional + 1 SFF or +1 Dual uFF (2x M.2 cartridges), will lose one FH PCIe slot.

New! Rear drive option allows for an additional + 1 SFF or +1 Dual uFF (2x M.2 cartridges).

QuickSpecs

HPE ProLiant DL360 Gen10 Server

Overview

Page 3

Internal View - Standard for all DL360 Gen10

For 8 SFF or 4 LFF - Standard single rotor hot plug fans

11.

System Battery

- 1 CPU – 5 standard fans

12.

Optional: TPM 2.0

- 2 CPUs – 7 standard fans

13.

Primary (CPU1) PCIe 3.0 riser

*Option: High Performance fans

Standard: GPU power connector + 1x 16 and 1x 8

NOTE: *For 10 NVMe chassis - 7 High Performance.

Optional: 2 SATA M.2 + 2x 16

NOTE: Fans will be shipped for 1 or 2 processors.

*Optional: 2x 4 NVMe + 1x 16 and 1x 8

Option: Smart Storage Battery

NOTE: *Only available on 8 SFF.

Up to 2 processors (shown with standard heat sinks)

14.

Optional: Front Display port / USB 2.0

MicroSD card slot (Dual Micro-SD option available)

15.

FlexibleLOM (supports various NICs up to 25GbE)

Option: Chassis Intrusion Detection

16.

x4 SATA port 1

Hard Drive backplane power connector

17.

x4 SATA port 2

Dual internal USB 3.0 connector

18.

x2 SATA port 3

Smart Array Controller (Type -a shown)

19.

x1 SATA port 4

Up to 2 Power Supplies for redundant power

20.

Optical / SATA port 5

10.

Secondary (CPU2) PCIe 3.0 riser

21.

Front Power USB 3.0 connector

Option: Low Profile x16 or

22.

DDR4 DIMM slots

*Option: Full Height x16 (Lose slot 2 on Primary riser)

(Fully populated 24 DIMMs shown)

NOTE: *For 10 NVMe chassis – Secondary Riser is not

available due to 10 x4 NVMe riser for PCIe direct attached.

QuickSpecs

HPE ProLiant DL360 Gen10 Server

Overview

Page 4

Rear View – Standard for all DL360 Gen10

Slot 1 PCIe 3.0

VGA port

Option: Rear Drive +1 SFF or 1 uFF SSD (2x M.2 cartridges)

Embedded 4x 1GbE Adapter

NOTE: Will lose one FH x16 PCIe slot1 with this option.

iLO Management Port

Slot 2 PCIe 3.0

Option: Serial Port

Option: Slot 3 PCIe 3.0 (Requires 2nd processor)

10.

USB 3.0 Ports

Power Supply 2

11.

Option: FlexibleLOM (Shown: 4x 1GbE)

Power Supply 1

NOTE: Supports Various NICs up to 25GbE.

What’s New

•

• Security features: iLO 5 (Security Root of Trust); Chassis Intrusion Detection; TPM 2.0; Digitally Signed FW

New! DL360 Gen10 Premium 10 SFF NVMe Server

• Rear Drive Option for additional 1 SFF or 1 dual uFF SSD (2x M.2 cartridges)

• Additional boot/drive options: SATA M.2; dual uFF SSD (2x M.2 cartridges)

• Intel® Xeon® Processor Scalable Family from 4 - 28 Cores; 85W - 205W; 1.8 - 3.6 GHz

• HPE DDR4 SmartMemory up to 2666 MT/s

QuickSpecs

HPE ProLiant DL360 Gen10 Server

Platform

Information

Page 5

Platform Information

Form Factor

1U rack

Chassis Types

8 SFF with options supporting: +2 SFF or 2 NVMe or 2 Dual uFF (4x M.2 cartridges)

+1SFF or 1 Dual uFF (2x M.2 cartridges).

System Fans

Standard – Standard single rotor hot plug fans

NOTE:

10 SFF NVMe Premium 4 LFF

NOTE: New Rear drive option available on all DL360 Gen10 chassis types for additional boot/storage:

1 CPU – Includes 5 standard fans 2 CPUs – Includes 7 standard fans

Optional High Performance Fan Kit available (includes 7 fans).

QuickSpecs

HPE ProLiant DL360 Gen10 Server

Standard Features

Page 6

Standard Features

Processors – Up to 2 of the following depending on model.

NOTE:

http://www.intel.com/xeon

Platinum 8180M

2.5 GHz

38.50 MB

205W

2 @ 10.4 GT/s

2666 MT/s

1.5 TB

Platinum 8180

2.5 GHz

38.50 MB

205W

2 @ 10.4 GT/s

2666 MT/s

768 GB

Platinum 8176M

2.1 GHz

38.50 MB

165W

2 @ 10.4 GT/s

2666 MT/s

1.5 TB

Platinum 8176

2.1 GHz

38.50 MB

165W

2 @ 10.4 GT/s

2666 MT/s

768 GB

Platinum 8170M

2.1 GHz

35.75 MB

165W

2 @ 10.4 GT/s

2666 MT/s

1.5 TB

Platinum 8170

2.1 GHz

35.75 MB

165W

2 @ 10.4 GT/s

2666 MT/s

768 GB

Platinum 8168

2.7 GHz

33.00 MB

205W

2 @ 10.4 GT/s

2666 MT/s

768 GB

Platinum 8164

2.0 GHz

35.75 MB

150W

2 @ 10.4 GT/s

2666 MT/s

768 GB

Platinum 8160M

2.1 GHz

33.00 MB

150W

2 @ 10.4 GT/s

2666 MT/s

1.5 TB

Platinum 8160

2.1 GHz

33.00 MB

150W

2 @ 10.4 GT/s

2666 MT/s

768 GB

Platinum 8158

3.0 GHz

24.75 MB

150W

2 @ 10.4 GT/s

2666 MT/s

768 GB

Platinum 8156

3.6 GHz

16.50 MB

105W

2 @ 10.4 GT/s

2666 MT/s

768 GB

Platinum 8153

2.0 GHz

22.00 MB

125W

2 @ 10.4 GT/s

2666 MT/s

768 GB

- 48 lanes PCIe 3.0, advanced RAS.

Gold 6152

2.1 GHz

30.25 MB

140W

2 @ 10.4 GT/s

2666 MT/s

768 GB

Gold 6150

2.7 GHz

24.75 MB

165W

2 @ 10.4 GT/s

2666 MT/s

768 GB

Gold 6148

2.4 GHz

27.50 MB

150W

2 @ 10.4 GT/s

2666 MT/s

768 GB

Gold 6142M

2.6 GHz

22.00 MB

150W

2 @ 10.4 GT/s

2666 MT/s

1.5 TB

Gold 6142

2.6 GHz

22.00 MB

150W

2 @ 10.4 GT/s

2666 MT/s

768 GB

Gold 6140M

2.3 GHz

24.75 MB

140W

2 @ 10.4 GT/s

2666 MT/s

1.5 TB

Gold 6140

2.3 GHz

24.75 MB

140W

2 @ 10.4 GT/s

2666 MT/s

768 GB

Gold 6138

2.0 GHz

27.50 MB

125W

2 @ 10.4 GT/s

2666 MT/s

768 GB

Gold 6136

3.0 GHz

24.75 MB

150W

2 @ 10.4 GT/s

2666 MT/s

768 GB

Gold 6134M

3.2 GHz

24.75 MB

130W

2 @ 10.4 GT/s

2666 MT/s

1.5 TB

Gold 6134

3.2 GHz

24.75 MB

130W

2 @ 10.4 GT/s

2666 MT/s

768 GB

Gold 6132

2.6 GHz

19.25 MB

140W

2 @ 10.4 GT/s

2666 MT/s

768 GB

Gold 6130

2.1 GHz

22.00 MB

125W

2 @ 10.4 GT/s

2666 MT/s

768 GB

Gold 6128

3.4 GHz

19.25 MB

115W

2 @ 10.4 GT/s

2666 MT/s

768 GB

Gold 6126

2.6 GHz

19.25 MB

125W

2 @ 10.4 GT/s

2666 MT/s

768 GB

Gold 5122

3.6 GHz

16.50 MB

105W

2 @ 10.4 GT/s

2666 MT/s

768 GB

Gold 5120

2.2 GHz

19.25 MB

105W

2 @ 10.4 GT/s

2400 MT/s

768 GB

Gold 5118

2.3 GHz

16.50 MB

105W

2 @ 10.4 GT/s

2400 MT/s

768 GB

Gold 5115

2.4 GHz

13.75 MB

85W

2 @ 10.4 GT/s

2400 MT/s

768 GB

supports

- 48 lanes PCIe 3.0, advanced RAS.

For more information regarding Intel Xeon processors, please see the following

Intel Xeon Models Frequency Cores L3 Cache Power UPI DDR4 MT/s

Max Memory

per socket

NOTE: Platinum Processors:

- 2 and 4 socket capable, 2S - 2UPI, 4S - 3UPI, 8S - 3UPI @ 10.4 GT/s.

- 6-Channel DDR4 @ 2666 MT/s.

- 768 GB max memory capacity (1.5 TB on select skus).

- Intel Turbo Boost Technology, Intel Hyper-Threading Technology Intel AVX-512 (2x 512-bit FMA).

Gold 6154 3.0 GHz 18 24.75 MB 200W 2 @ 10.4 GT/s 2666 MT/s 768 GB

NOTE: Gold Processors:

- 2 and 4 socket capable, 2S - 2UPI, 4S - 3UPI @ 10.4 GT/s.

- 6-Channel DDR4 @ 2400 MT/s (SKU 5122 - supports 2666 MT/s).

- 768 GB max memory capacity (1.5 TB on select skus).

- Intel Turbo Boost Technology, Intel Hyper-Threading Technology, Intel AVX-512 (1x 512-bit FMA) (SKU 5122 2x 512 bit FMA).

QuickSpecs

HPE ProLiant DL360 Gen10 Server

Standard Features

Page 7

Silver 4116

2.1 GHz

16.50 MB

85W

2 @ 9.6 GT/s

2400 MT/s

768 GB

Silver 4114

2.2 GHz

13.75 MB

85W

2 @ 9.6 GT/s

2400 MT/s

768 GB

Silver 4112

2.6 GHz

8.25 MB

85W

2 @ 9.6 GT/s

2400 MT/s

768 GB

Silver 4110

2.1 GHz

11.00 MB

85W

2 @ 9.6 GT/s

2400 MT/s

768 GB

Silver 4108

1.8 GHz

11.00 MB

85W

2 @ 9.6 GT/s

2400 MT/s

768 GB

- 48 lanes PCIe 3.0, standard RAS.

Bronze 3106

1.7 GHz

11.00 MB

85W

2 @ 9.6 GT/s

2133 MT/s

768 GB

Bronze 3104

1.7 GHz

11.00 MB

85W

2 @ 9.6 GT/s

2133 MT/s

768 GB

- 48 lanes PCIe 3.0, standard RAS.

Chipset

Intel C621 Chipset

NOTE: For more information regarding Intel® chipsets, please see the following URL:

http://www.intel.com/products/server/chipsets/.

On System Management Chipset

HPE iLO 5 ASIC

NOTE: Read and learn more in the iLO QuickSpecs.

Memory

Type

HPE DDR4 SmartMemory Registered (RDIMM), Load Reduced (LRDIMM)

DIMM Slots Available

12 DIMM slots per processor, 6 channels per processor, 2 DIMMs per channel

Maximum capacity (LRDIMM)

3.0 TB*

24 x 128 GB LRDIMM @ 2666 MT/s

Maximum capacity (RDIMM)

768 GB

24 x 32 GB RDIMM @ 2666 MT/s

NVDIMM

192 GB

12 x 16 GB NVDIMM @ 2666 MT/s

NOTE: *128 GB LRDIMM and NVDIMM will be available 2H2017.

NOTE: Mixing of RDIMM and LRDIMM memory is not supported.

Memory Protection

Advanced ECC

Advanced ECC uses single device data correction to detect and correct single and all multibit error that occurs within a single DRAM chip.

Online Spare

Memory online spare mode detects a rank that is degrading and switches operation to the spare rank.

NOTE: For more information see our Memory RAS feature technical whitepaper.

NOTE: Silver Processors:

- 2 socket capable, 2S - 2UPI @ 9.6 GT/s.

- 6-Channel DDR4 @ 2400 MT/s, 768 GB max memory capacity.

- Intel Turbo Boost Technology, Intel Hyper-Threading Technology, Intel AVX-512 (1x 512-bit FMA).

NOTE: Bronze Processors:

- 2 socket capable, 2S - 2UPI @ 9.6 GT/s.

- 6-Channel DDR4 @ 2133 MT/s, 768 GB max memory capacity.

- Intel AVX-512 (1x 512-bit FMA).

NOTE: Maximum memory per socket is dependent on processor selection. Processors supporting 1.5 TB per CPU is indicated by the “M” in the processor model names (i.e. 8160M).

QuickSpecs

HPE ProLiant DL360 Gen10 Server

Standard Features

Page 8

Expansion Slots

Primary

GPU Riser

Expansion

Slots #

Technology

Bus

Width

Connector

Width

Processor

Slot Form Factor

PCIe 3.0

x16

CPU1

Full-height, 3/4 length (up to 9.5in)

PCIe 3.0

CPU1

Low Profile

Primary

SATA M.2 Riser

Expansion

Slots #

Technology

Bus

Width

Connector

Width

Processor

Slot Form Factor

Primary

NVMe Riser

Expansion

Slots #

Technology

Bus

Width

Connector

Width

Processor

Slot Form Factor

PCIe 3.0

x16

CPU 1

Full-height; 3/4 length (up to 9.5")

PCIe 3.0

CPU 1

Low Profile

Secondary

Riser*

Expansion

Slots #

Technology

Bus

Width

Connector

Width

Processor

Slot Form Factor

Low Profile or

NOTE: If secondary full height kit is installed, then primary PCIe Slot #2 cannot be used. Only 2 full height slots are supported.

Storage Controllers

Software RAID

HPE Smart Array S100i SR Gen10 SW RAID

NOTE: HPE Smart Array S100i SR Gen10 SW RAID will operate in UEFI mode only. For legacy support an additional

Essential RAID Controllers

HPE Smart Array E208i-a SR Gen10 Controller

HPE Smart Array E208i-a SR G10 LH Controller

HPE Smart Array E208i-p SR Gen10 Controller

HPE Smart Array E208e-p SR Gen10 Controller

Performance RAID Controllers

HPE Smart Array P408i-a SR Gen10 Controller

HPE Smart Array P408i-a SR G10 LH Controller

HPE Smart Array P408i-p SR Gen10 Controller

HPE Smart Array P408e-p SR Gen10 Controller

HPE Smart Array P816i-a SR Gen10 Controller

HPE Smart Array P816i-a SR G10 LH Controller

NOTE: If GPGPU is needed then please order the LH controller (low profile heatsink) to allow GPU to fit in the chassis.

NOTE: For additional details, please see HPE Smart Array Gen10 Controllers Data Sheet.

1 PCIe 3.0 x16 x16 CPU 1 Full-height; 3/4 length (up to 9.5in)

2 PCIe 3.0 x16 x16 CPU 1 Low Profile

3 PCIe 3.0 x16 x16 CPU 2

Full-height; 3/4 length (up to 9.5")

controller will be needed, and for CTO orders please also select the Legacy mode settings part, 758959-B22.

NOTE: HPE Smart Array S100i SR Gen10 SW RAID is off by default and must be enabled. NOTE: The S100i is a 14-port SATA controller, but only 12 ports are accessible as 2 are leveraged to support the 2 M.2

options on the Primary Riser.

QuickSpecs

HPE ProLiant DL360 Gen10 Server

Standard Features

Page 9

Internal Storage Devices

Optical Drive

Available on 8 SFF and 4 LFF CTO Servers as an option (DVD-ROM or DVD-RW)

Hard Drives

None ship standard

Maximum Storage

STORAGE

CAPACITY

CONFIGURATION

Hot Plug SFF SAS

22 TB

8+2+1 x 2 TB (with optional UMB + rear drive option)

Hot Plug SFF SATA HDD

22 TB

8+2+1 x 2 TB (with optional UMB + rear drive option)

Hot Plug SFF SATA SSD

42.24 TB

8+2+1 x 3.84TB (with optional UMB + rear drive option)

Hot Plug SFF NVMe PCIe SSD

23.84 TB

10 x 2 TB NVMe + 1 SFF x 3.84 TB (with rear drive option)

Hot Plug LFF SAS

40 TB

4 x 10 TB

Hot Plug LFF SATA

40 TB

4 x 10 TB

Hot Plug LFF SATA SSD

6.4 TB

4 x 1.6 TB

Power Supply

HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

NOTE: Available in 94% efficiency.

HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

NOTE: Available in 94% and 96% efficiency.

HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

NOTE: Available in 94% efficiency.

HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less

HPE Server power supplies.

Interfaces

Serial

1 port - Optional

Video

1 Front - Display port (optional 8 SFF and 4 LFF only) 1 Rear - VGA port (standard on all chassis types)

NOTE: Both ports are not active simultaneously.

Network Ports

4x 1GbE embedded NIC (standard on all chassis types)

1 FlexibleLOM slot available on all chassis types (supporting various NICs adapters)

iLO Remote Mgmt Port

1 Gb Dedicated

MicroSD Slot

1 MicroSD slot

NOTE: The MicroSD slot is not hot-pluggable, please power down server before removal.

USB 3.0

Up to 5 total: 1 front, 2 rear, 2 internal (standard on all chassis types) +1 optional USB 2.0 front (on 8 SFF and 4 LFF only)

SID (Systems Insight Display)

Optional for all chassis types

NOTE: Also available in -48VDC and 227VAC/380VDC power inputs.

installation into HPE ProLiant Gen10 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.

All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is also included with each standard AC power supply option kit. If a different power cord is required, please check the ProLiant Power Cables web page.

To review the power requirements for your selected system, please use the HPE Power Advisor Tool.

For information on power specifications and technical content visit

QuickSpecs

HPE ProLiant DL360 Gen10 Server

Standard Features

Page 10

NOTE: Will lose iLO Service Port if selecting this option.

Operating Systems and Virtualization Software

Windows Server 2012 R2 (Most Recent Version)

Windows Server 2016 (Most Recent Version)

VMware ESXi 6.0 U3

VMware ESXi 6.5 and U1 upon release

Red Hat Enterprise Linux (RHEL) 6.9 and 7.3

SUSE Linux Enterprise Server (SLES) 11 SP4 and 12 SP2

ClearOS

NOTE: ClearOS allows you to build a fully functional server that is just right for you at no upfront cost. For more information on ClearOS, please visit http://www.hpe.com/servers/clearos.

CentOS

NOTE: For more information on Hewlett Packard Enterprise Certified and Supported ProLiant Servers for OS and

http://h20566.www2.hpe.com/portal/site/hpsc?ac.admitted=1497363250585.125225703.1938120508

Industry Standard Compliance

•

• Energy Star

NOTE: For additional technical thermal details regarding ambient temperatures, humidity and features support please visit:

http://www.hpe.com/servers/ashrae.

Graphics

Integrated video standard

• 16 MB Video Memory

HPE iLO 5 on system management memory

• 4 Gbit DDR3 with ECC protection

Virtualization Software and latest listing of software drivers available for your server.

ACPI 6.1 Compliant

• PCIe 3.0 Compliant

• WOL Support

• Microsoft® Logo certifications

• PXE Support

• USB 3.0 Compliant

• USB 2.0 Compliant (only on optional Universal Media Bay)

• SMBIOS 3.1

• UEFI 2.6 (Unified Extensible Firmware Interface Forum)

• Redfish API

• IPMI 2.0

• Secure Digital 4.0

• TPM 1.2 and 2.0 support

• Advanced Encryption Standard (AES)

• Triple Data Encryption Standard (3DES)

• SNMP v3

• TLS 1.2

• DMTF Systems Management Architecture for Server Hardware Command Line (SMASH CLP)

• Active Directory v1.0

• ASHRAE A3/A4

• Video modes up to 1920 x 1200 @ 60 Hz (32 bpp)

• 32 MB Flash

QuickSpecs

HPE ProLiant DL360 Gen10 Server

Standard Features

Page 11

HPE Server UEFI/Legacy ROM

Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured

Class 2 implementation and support both UEFI Mode (default) and Legacy BIOS Mode.

NOTE: The UEFI System Utilities tool is analogous to the HPE ROM-Based Setup Utility (RBSU) of legacy BIOS. For more

ProLiant Gen10 Server.

Embedded Management

HPE Integrated Lights-Out (HPE iLO)

Monitor your servers for ongoing management, service alerting, reporting and remote

UEFI

Configure and boot your servers securely with industry standard Unified Extensible Firmware

http://www.hpe.com/servers/uefi

Intelligent Provisioning

Hassle free server and OS provisioning for one or more servers with Intelligent Provisioning. Learn more at http://www.hpe.com/servers/intelligentprovisioning.

iLO RESTful API

iLO RESTful API is Redfish API conformance and offers simplified server management

standards. Learn more at http://www.hpe.com/info/restfulapi.

Server Utilities

Active Health System

The HPE Active Health System (AHS) is an essential component of the iLO management

. Learn more at

http://www.hpe.com/servers/ahs.

Active Health System

Use the Active Health System Viewer, a web-based portal, to easily read AHS logs and speed

http://www.hpe.com/servers/ahsv.

configuration than the legacy ROM while interacting with your server at boot time. HPE ProLiant Gen10 servers have a UEFI

information, please visit http://www.hpe.com/servers/uefi.

UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:

• Secure Boot and Secure Start enable for enhanced security

• Operating system specific functionality

• Support for > 2.2 TB (using GPT) boot drives

• USB 3.0 Stack

• Embedded UEFI Shell

• Mass Configuration Deployment Tool using iLO RESTful API that is Redfish API Conformant

• PXE boot support for IPv6 networks

• Workload Profiles for simple performance optimization

UEFI Boot Mode only:

• TPM 2.0 Support

• NVMe Boot Support

• Platform Trust Technology (PTT) can be enabled.

• iSCSI Software Initiator Support.

• HTTP/HTTPs Boot support as a PXE alternative.

• Boot support for option cards that only support a UEFI option ROM

NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured properly to support UEFI. NOTE: UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in the factory for your HPE

management with HPE iLO. Learn more at http://www.hpe.com/info/ilo.

Interface (UEFI). Learn more at

automation such as configuration and maintenance tasks based on modern industry

portfolio that provides continuous, proactive health monitoring of HPE servers

Viewer

problem resolution with HPE self-repair recommendations, to learn more visit:

QuickSpecs

HPE ProLiant DL360 Gen10 Server

Standard Features

Page 12

Smart Update

Keep your servers up to date with the HPE Smart Update solution by using Smart Update

(SPP). Learn more at http://www.hpe.com/info/smartupdate.

iLO Amplifier Pack

Designed for large enterprise and service provider environments with hundreds of HPE

http://www.hpe.com/servers/iLOamplifierpack

HPE iLO Mobile Application

Enables the ability to access, deploy, and manage your server anytime from anywhere from

http://www.hpe.com/info/ilo/mobileapp

RESTful Interface Tool

RESTful Interface tool (iLOREST) is a single scripting tool to provision using iLO RESTful API

http://www.hpe.com/info/resttool

Scripting Tools

Provision one to many servers using your own scripts to discover and deploy with Scripting Tool (STK) for Windows and Linux or Scripting Tools for Windows PowerShell. Learn more at

http://www.hpe.com/servers/stk

http://www.hpe.com/servers/powershell

HPE OneView Standard

HPE OneView Standard can be used for inventory, health monitoring, alerting, and reporting

http://www.hpe.com/info/oneview

HPE Systems Insight

Ideal for environments already using HPE SIM, it allows you to monitor the health of your

seamless firmware updates. Learn more at http://www.hpe.com/info/hpesim.

Security

• UEFI Secure Boot and Secure Start support

•

• FIPS 140-2 validation (iLO 5 certification in progress)

• Common Criteria certification (iLO 5 certification in progress)

• Configurable for PCI DSS compliance

• Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on browser

• Support for Commercial National Security Algorithms (CNSA)

• iLO Security Modes including a New iLO Advanced Premium Security License

• Granular control over iLO interfaces

• Smart card (PIV/CAC) and Kerberos based 2-factor Authentication

• Tamper-free updates – components digitally signed and verified

• Secure Recovery – recover critical firmware to known good state on detection of compromised FW

• Ability to rollback firmware

• Secure erase of NAND

• TPM (Trusted Platform Module) 1.2 option

Manager (SUM) to optimize the firmware and driver updates of the Service Pack for ProLiant

servers, the iLO Amplifier Pack is a free, downloadable open virtual application (OVA) that delivers the power to discover, inventory and update Gen8, Gen9 and Gen10 HPE servers at unmatched speed and scale. Use with an iLO Advanced License to unlock full capabilities. Learn more at

select smartphones and mobile devices. For additional information please visit:

Manager (HPE SIM)

Immutable Silicon Root of Trust

to discover and deploy servers at scale. Learn more at

without additional fees. It can monitor multiple HPE server generations. The user interface is similar to the HPE OneView Advanced version, but the software-defined functionality is not available. Learn more at

HPE ProLiant Servers and HPE Integrity Servers. Also provides you with basic support for non-HPE servers. HPE SIM also integrates with Smart Update Manager to provide quick and

QuickSpecs

HPE ProLiant DL360 Gen10 Server

Standard Features

Page 13

• TPM (Trusted Platform Module) 2.0 option Bezel Locking Kit

• Chassis Intrusion detection option

Warranty

This product is covered by a global limited warranty and supported by HPE Services and a worldwide network of HPE

three year warranty; refer to the specific hard drive QuickSpecs for details.

NOTE: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response.

http://h17007.www1.hpe.com/us/en/enterprise/servers/warranty/.

Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HPE Care Pack services or customized service agreements. Hard drives have either a one year or

Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have Hewlett Packard Enterprise replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at:

+ 29 hidden pages