HPE P09708-B21 Getting Started Guide

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Overview

Page 1

HPE ProLiant DL385 Gen10 Server

The HPE ProLiant DL385 Gen10 Server is redefining price/performance with the new math for virtualized compute. This 2P, 2U server has been designed purpose-built platform for virtualization.

Front View – SFF chassis with optional Universal Media bay with optical and 2 NVME plus 16 NVMe shown

Quick removal access panel

Drive Bay 1. Optional Universal Media bay. 2 USB 2.0 and SFF+2NVMe or 8NVMe optional)

Optional Optical drive. Requires Universal Media bay

Drive Bay 2. NVMe shown (8 SFF, 6SFF+2NVMe or 8 NVMe PCIe SSD optional)

Optional 2 SFF HDD, requires optional Universal Media bay

Power On/Standby button and system power LED button

Drive Bay 3. NVMe shown (8 SFF, 6SFF+2NVMe or 8 NVMe PCIe SSD optional)

NIC status

Health LED

11.

iLO Front Service Port

10.

UID button

13.

Serial label pull tag

12.

USB 3.0

15.

Box 2

14.

Box 3

17.

Optional front display port (Via Universal Media Bay)

16.

Box 1

18.

Optional USB 2.0 (via Universal Media Bay)

with flexibility while delivering a high maximum core count and large memory footprint. Choose this

Display port standard shown (8 SFF bay or 6

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Overview

Page 2

Front View – 8LFF chassis with Universal media bay and optional 2SFF and optical drive shown

Unit ID button

Health LED

NIC status

Power On/Standby button and system power LED button

Front display port

iLO Front Service Port

Serial label pull tag

Optional optical drive shown (blank as standard)

Optional 2 SFF Drive bay, 2 NVMe shown

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Overview

Page 3

Internal View 8SFF chassis – with optional 2nd CPU, FlexLOM, Smart array shown

Fan cage shown with 6 standard Hot-plug fans (High Performance fans optional)

2 Processors (heatsinks shown)

Optional HPE Smart Storage Battery (not shown)

DDR4 DIMM slots. Shown fully populated in 32 slots (16 per processor)

MicroSD card slot (Optional Dual Micro-SD option)

Chassis intrusion detection connector

Optional HPE Flexible Smart Array Controller (P408i-a shown)

(Under) Hot Plug redundant HPE Flexible Slot Power supplies

Connection for second (optional) riser (Requires second CPU)

10.

Embedded 4x1Gbe NIC

11.

Primary PCIe riser, standard (Optional double wide GPU riser)

12.

Optional Flexible LOM slot

13.

Internal USB 3.0 connector

14.

Embedded M.2 connectors

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Overview

Page 4

Rear View – With optional FlexLOM, Rear drives and Serial port shown.

Primary Riser. PCI Slots (Slots 1-3 top to bottom, riser shipped standard, not shown)

Secondary Riser. PCI Slots (Slots 4-6top to bottom, not shown, requires second riser card, and second processor). Optional 2 SFF rear drives

Optional serial port

Tertiary Riser (Slots 7-8 top to bottom, not shown). Optional rear 2 SFF HDD

Power supply power connection. Bay 1

Power supply Power LED. Bay1

HPE Flexible Slot Power Supply. Bay 1

Power supply Power connection Bay 2

Power supply Power LED Bay 2

10.

HPE Flexible Slot Power Supply Bay 2

11.

VGA connector

12.

Embedded 4 x 1GbE Network Adapter

13.

Dedicated iLO management port

14.

USB connectors 3.0 (2)

15.

Unit ID LED

16.

Optional FlexibleLOM ports (Shown: 4 x 1GbE)

What’s New:

• 32 DIMM slots

• AMD® EPYC® 7000 Processor Family

• Two embedded M.2 connectors on the system board

• Highly flexible drive options (SSD, M.2, NVMe)

Optional 2SFF rear drives

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Overview

Page 5

Platform Information

Form Factor

2U rack

Chassis Types

8 SFF with optional Universal Media Bay, and optional SFF or NVMe drive bay options

the SFF chassis and replaces

software RAID support for the 2 embedded M.2 drive connectors on the system board.

System Fans

Standard – fan types included

SKUs, or NVMe configurations.

24 SFF bay with additional 6SFF rear drive bay option to total 30 SFF drives 8 LFF with Universal Media Bay 12 LFF with optional 4 LFF mid-plane and optional 3LFF + 2 SFF rear drive bay to total 19 LFF drives + 2 SFF drives

NOTE: The 3 LFF rear drive box will consume space for the secondary and tertiary riser. NOTE: The 8 and 12 LFF chassis also supports the 2 SFF rear drive box which allows for the user to

attach a secondary or tertiary riser. NOTE: The 8 NVMe drive option (826689-B21) can only be leveraged in Box 1, 2 or 3. NOTE: The Premium cage (826690-B21, 6 SAS/SATA+2 NVMe) can only be leveraged in the SFF chassis and replaces Box 1, 2 or 3. NOTE: The Universal Media Bay (882097-B21) not available with the LFF chassis or the 24 SFF front end, and can only be populated in Box 1. NOTE: The 8 SFF can be upgraded with additional 8SFF drive box to total 16 or 24 SFF drives. For optimal upgrade Box 2 should be populated second, with Box 1 the last to be populated for a field upgrade to 24 SFF. For CTO builds requiring 24 SFF please use the 24 SFF chassis (878613-B21). Note a field upgrade to 24 SFF will require a High Performance fan kit (867810-B21). NOTE: The 8 LFF chassis cannot be upgraded to 12 LFF front in the field; however the 4-LFF Mid plane (882096-B21) is supported, but will also require a performance fan kit (867810-B21).

NOTE: CPU selection is limited 125W or lower with 4LFF midtray selected. NOTE: The 8LFF chassis ships with 6-standard fans. NOTE: All models come with the S100i Smart Array Controller (Available 2H2018) with embedded

NOTE: 1P models ship with 4 standard fans. The second processor option kit contains 2 additional

fans.

NOTE: The 12 LFF and 24 SFF chassis ship with 6 High performance fans as standard. NOTE: The 8LFF chassis ships with 6 standard fans as standard. NOTE: High performance fan kit is available to meet ambient temperature environments. NOTE: High performance fan kits are required for rear drives, Graphics (GPU) card, 180w Processors

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Standard Features

Page 6

Standard Features

Processors – Up to 2 of the following depending on model.

following:

https://www.amd.com/en/products/epyc.

AMD EPYC

Processor

Base

Frequency

Max

Frequency

Max

Memory

EPYC 7601

2.2Ghz

3.2Ghz

2TB

180

64MB

2666MT/S

EPYC 7551

2.0Ghz

3.0Ghz

2TB

180

64MB

2666MT/S

EPYC 7501

2.0Ghz

3.0Ghz

2TB

155/170

64MB

2666MT/S

EPYC 7451

2.3Ghz

3.2Ghz

2TB

180

64MB

2400/2666MT/S

EPYC 7401

2.0Ghz

3.0Ghz

2TB

155/170

64MB

2400/2666MT/S

EPYC 7351

2.4Ghz

2.9Ghz

2TB

155/170

64MB

2400/2666MT/S

EPYC 7301

2.2Ghz

2.7Ghz

2TB

155/170

64MB

2400/2666MT/S

EPYC 7281

2.1Ghz

2.7Ghz

2TB

155/170

32MB

2400/2666MT/S

EPYC 7251

2.1Ghz

2.9Ghz

2TB

120

32MB

2400MT/S

NOTE: All AMD EPYC processors can support up to 2TB of memory each.

Chipset

No chipset – System on Chip (SoC) design.

On System Management Chipset

HPE iLO 5 ASIC

NOTE: Read and learn more in the iLO QuickSpecs.

Memory

One of the following depending on model

Type:

HPE DDR4 SmartMemory,

DIMM Slots Available

16 DIMM slots per processor, 8 channels per processor, 2 DIMMs per channel

Maximum capacity (LRDIMM)

4.0 TB

32 x 128 GB LRDIMM @ 2666 MHz

Maximum capacity (RDIMM)

1.0 TB

32 x 32 GB RDIMM @ 2666 MHz

NOTE: The maximum memory speed is limited by the processor selection. NOTE:

NOTE: For more information regarding AMD EPYC processors, please see the

Cores

Wattage Cache

Registered (RDIMM), Load Reduced (LRDIMM)

Mixing of RDIMM and LRDIMM memory is not supported.

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Standard Features

Page 7

Expansion Slots

Slots #

Technology

Bus

Width

Connector

Width

Slot Form Factor

Notes

PCIe 3.0

X8 Full-height,

full-length slot

Proc 1

PCIe 3.0

X16

X16 Full-height,

full-length slot

Proc 1

PCIe 3.0

X8 Full-height,

half-length slot

Proc 1

NOTE: Bus Width Indicates the number of physical electrical lanes running to the connector.

Slots #

Technology

Bus

Width

Connector

Width

Slot Form Factor

Notes

PCIe 3.0

X8 Full-height,

full-length slot

Proc 2

PCIe 3.0

X16

X16 Full-height,

full-length slot

Proc 2

PCIe 3.0

X8 Full-height,

half-length slot

Proc 2

Slots #

Technology

Bus

Width

Connector

Width

Slot Form Factor

Notes

PCIe 3.0

X8 Full-height,

full-length slot

Proc 2

PCIe 3.0

X8 Full-height,

full-length slot

Proc 2

NOTE: Tertiary riser (other options available) can be leveraged without secondary riser. NOTE:

Storage Controllers

The Gen10 controller naming framework has been updated to simplify identification as depicted below. For a more detailed

HPE Smart Array Gen10 Controllers Data Sheet.

One of the following depending on model

Software RAID

HPE Smart Array S100i SR Gen10 SW RAID

NOTE: HPE Smart Array S100i SR Gen10 SW RAID will operate in UEFI mode only. For legacy support an additional

NOTE: S100i is available 2H2018.

Essential RAID Controller

HPE Smart Array E208i-a SR Gen10 Controller

HPE Smart Array E208i-p SR Gen10 Controller

HPE Smart Array E208e-p SR Gen10 Controller

Performance RAID

HPE Smart Array P408i-a SR Gen10 Controller

HPE Smart Array P408i-p SR Gen10 Controller

HPE Smart Array P408e-p SR Gen10 Controller

HPE Smart Array P816i-a SR Gen10 Controller

NOTE: Performance RAID Controllers require the HPE Smart Storage Battery (P01366-B21) which is sold separately.

Bus width indicated the number of physical electrical lanes running to the connector.

breakout of the available Gen10 Smart Array controllers visit the

controller will be needed, and for CTO orders please also select the Legacy mode settings part, 758959-B22.

NOTE: HPE Smart Array S100i SR Gen10 SW RAID is off by default and must be enabled. NOTE: The S100i supports the 2 M.2 system board connectors.

Controller

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Standard Features

Page 8

Internal Storage Devices

One of the following depending on model

Optical Drive

Ships standard in Performance Models

Optional: DVD-ROM, DVD-RW

Hard Drives

None ship standard

Maximum Internal Storage

CAPACITY

CONFIGURATION

Hot Plug SFF SAS

72.0 TB

24+6 x 2.4 TB* (with optional rear SFF drive cage)

Hot Plug SFF SATA

60.0 TB

24+6 x 2 TB (with optional SFF drive cage)

Hot Plug LFF SAS

235.68 TB

12+4+3 x 12 TB + 2 x 3.84 TB (with optional mid –tray and rear LFF drive cage, plus 2 SFF SSD rear)

Hot Plug LFF SATA

235.68 TB

12+4+3 x 12 TB + 2 x 3.84 TB (with optional mid –tray and Hot Plug SFF SAS SSD

230.4 TB

24+6 x 7.68 TB (with optional rear SFF drive cage)

Hot Plug LFF SATA SSD

44.16 TB

12+4+3 x 1.92 TB + 2 x 3.84 TB (with optional mid –tray and rear LFF drive cage, plus 2 SFF SSD rear)

Hot Plug SFF NVMe PCIe SSD

38.4 TB NVMe

24 x 1.6 TB NVMe

NOTE: 2x m.2 drives are supported on the system board. NOTE:

Power Supply

HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

NOTE: Available in 94% efficiency.

HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

NOTE: Available in 94% and 96% efficiency. NOTE: Also available in -48VDC and 227VAC/380VDC power inputs.

HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

NOTE: Available in 94% efficiency. NOTE:

HPE Flexible Slot (Flex Slot) Power Supplies share a common electrical and physical design that allows for hot plug, tool-less

HPE Server power supplies

Interfaces

Serial

Optional, rear

Display Port

1 (SFF 1 front, optional via Universal Media Bay, 882097-B21), 8 LFF chassis standard

FlexibleLOM Network Ports

4 x 1 Gb ports shipping standard with optional FlexibleLOM or stand up card

HPE iLO Remote Management Network Port

1 Gb Dedicated

rear LFF drive cage, plus 2 SFF SSD rear)

uFF drives are also supported.

240v power input only.

installation into HPE ProLiant Gen10 Performance Servers. Flex Slot power supplies are certified for high-efficiency operation and offer multiple power output options, allowing users to "right-size" a power supply for specific server configurations. This flexibility helps to reduce power waste, lower overall energy costs, and avoid "trapped" power capacity in the data center.

All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord (A0K02A). This jumper cord is also included with each standard AC power supply option kit. If a different power cord is required, please check the ProLiant Power Cables web page.

To review the power requirements for your selected system, please use the HPE Power Advisor Tool.

For information on power specifications and technical content visit

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Standard Features

Page 9

Front iLO Service Port

1 standard (Not available on 12 LFF chassis or when SID is ordered, note iLO dongle required, 880123-B21)

Micro SD Slot

1 Micro SD

NOTE: The Micro SD slot is not a hot-pluggable device. Customers should not attempt to plug an SD card into the SD slot

while the server is powered.

USB 3.0

Up to 5 total: 1 front, 2 rear, 2 internal (secure), 2 optional USB 2.0 front via Universal Media Bay, or standard on 8LFF chassis

SID (Systems Insight Display)

Optional

NOTE: Not shipping as standard. Available as a CTO option or as a field upgrade (882099-B21).

Operating Systems and Virtualization Software Support for ProLiant Servers

Windows Server 2012 R2 (Most Recent Version)

Windows Server 2016 (Most Recent Version)

VMware ESXi 6.5 and U1 upon release

Red Hat Enterprise Linux (RHEL) 7.4

SUSE Linux Enterprise Server (SLES) 12 SP3

NOTE: For more information on Hewlett Packard Enterprise Certified and Supported ProLiant Servers for OS and

https://www.hpe.com/us/en/servers/server-operating-systems.html

Industry Standard Compliance

ACPI 6.1 Compliant

PCIe 3.0 Compliant

WOL Support

Microsoft® Logo certifications

PXE Support

VGA/Display Port

NOTE: This support is on the optional Universal Media Bay.

USB 3.0 Compliant (internal)

USB 2.0 Compliant (external ports via SUV)

NOTE: This support is on the optional Universal Media Bay.

Energy Star

SMBIOS 3.1

UEFI 2.6

Redfish API

IPMI 2.0

Secure Digital 2.0

Advanced Encryption Standard (AES)

Triple Data Encrytion Standard (3DES)

SNMP v3

TLS 1.2

DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP)

Active Directory v1.0

ASHRAE A3/A4

NOTE: For additional technical thermal details regarding ambient temperatures, humidity and features support please

visit: http://www.hpe.com/servers/ashrae.

Virtualization Software and latest listing of software drivers available for your server.

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Standard Features

Page 10

UEFI (Unified Extensible Firmware Interface Forum)

NOTE: UEFI is the default for the DL385 Gen10. Legacy mode can be selected in the field or as a CTO option

(758959-B22).

Graphics

Integrated Video Standard

• Video modes up to 1920 x 1200@60Hz (32 bpp)

• 16MB Video Memory

HPE iLO 5 on system management memory

• 32 MB Flash

• 4 Gbit DDR 3 with ECC protection

HPE Server UEFI/Legacy ROM

Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured

ProLiant Gen10 Server.

Embedded Management

HPE Integrated Lights-

(HPE iLO)

Monitor your servers for ongoing management, service alerting, reporting and remote

UEFI

Configure and boot your servers securely with industry standard Unified Extensible Firmware

http://www.hpe.com/servers/uefi

Intelligent Provisioning

Hassle free server and OS provisioning for 1 or more servers with Intelligent Provisioning. Learn more at http://www.hpe.com/servers/intelligentprovisioning.

configuration than the legacy ROM while interacting with your server at boot time. HPE ProLiant Gen10 servers have a UEFI Class 2 implementation and support both UEFI Mode (default) and Legacy BIOS Mode.

NOTE: The UEFI System Utilities tool is analogous to the HPE ROM-Based Setup Utility (RBSU) of legacy BIOS. For more information, please visit http://www.hpe.com/servers/uefi.

UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:

• Secure Boot and Secure Start enable for enhanced security

• Operating system specific functionality

• Support for > 2.2 TB (using GPT) boot drives

• USB 3.0 Stack

• Embedded UEFI Shell

• Mass Configuration Deployment Tool using iLO RESTful API that is Redfish API Conformant

• PXE boot support for IPv6 networks

• Workload Profiles for simple performance optimization

UEFI Boot Mode only:

• TPM 2.0 Support

• NVMe Boot Support

• Platform Trust Technology (PTT) can be enabled.

• iSCSI Software Initiator Support.

• HTTP/HTTPs Boot support as a PXE alternative.

• Boot support for option cards that only support a UEFI option ROM

NOTE: For UEFI Boot Mode, boot environment and OS image installations should be configured properly to support UEFI. NOTE: UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy mode in the factory for your HPE

Out

management with HPE iLO. Learn more at http://www.hpe.com/info/ilo.

Interface (UEFI). Learn more at

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Standard Features

Page 11

iLO RESTful API

iLO RESTful API is Redfish API conformance and offers simplified server management

http://www.hpe.com/info/restfulapi

Server Utilities

Active Health System

The HPE Active Health System (AHS) is an essential component of the iLO management

at http://www.hpe.com/servers/ahs.

Active Health System

Use the Active Health System Viewer, a web-based portal, to easily read AHS logs and speed

visit: http://www.hpe.com/servers/ahsv.

Smart Update

Keep your servers up to date with the HPE Smart Update solution by using Smart Update

http://www.hpe.com/info/smartupdate.

iLO Amplifier Pack

Designed for large enterprise and service provider environments with hundreds of HPE

http://www.hpe.com/servers/iLOamplifierpack

HPE iLO Mobile

Enables the ability to access, deploy, and manage your server anytime from anywhere from

http://www.hpe.com/info/ilo/mobileapp

RESTful Interface Tool

RESTful Interface tool (iLOREST) is a single scripting tool to provision using iLO RESTful API

http://www.hpe.com/info/resttool

Scripting Tools

Provision one to many servers using your own scripts to discover and deploy with Scripting

http://www.hpe.com/servers/stk

http://www.hpe.com/servers/powershell

HPE OneView Standard

HPE OneView Standard can be used for inventory, health monitoring, alerting, and reporting

available. Learn more at http://www.hpe.com/info/oneview.

HPE Systems Insight

Ideal for environments already using HPE SIM, it allows you to monitor the health of your HPE

firmware updates. Learn more at http://www.hpe.com/info/hpesim.

automation such as configuration and maintenance tasks based on modern industry standards. Learn more at

portfolio that provides continuous, proactive health monitoring of HPE servers. Learn more

Viewer

Application

problem resolution with HPE self-repair recommendations, to learn more

Manager (SUM) to optimize the firmware and driver updates of the Service Pack for ProLiant (SPP). Learn more at

servers, the iLO Amplifier Pack is a free, downloadable open virtual application (OVA) that delivers the power to discover, inventory and update Gen8, Gen9 and Gen10 HPE servers at unmatched speed and scale. Use with an iLO Advanced License to unlock full capabilities. Learn more at

select smartphones and mobile devices. For additional information please visit:

to discover and deploy servers at scale. Learn more at

Tool (STK) for Windows and Linux or Scripting Tools for Windows PowerShell. Learn more at

without additional fees. It can monitor multiple HPE server generations. The user interface is similar to the HPE OneView Advanced version, but the software-defined functionality is not

Manager (HPE SIM)

ProLiant Servers and HPE Integrity Servers. Also provides you with basic support for non-HPE servers. HPE SIM also integrates with Smart Update Manager to provide quick and seamless

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Standard Features

Page 12

Security

UEFI Secure Boot and Secure Start support

Immutable Silicon Root of Trust

FIPS 140-2 validation (iLO 5 certification in progress)

Common Criteria certification (iLO 5 certification in progress)

Configurable for PCI DSS compliance

Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on browser

Support for Commercial National Security Algorithms (CNSA)

Tamper-free updates – components digitally signed and verified

Secure Recovery – recover critical firmware to known good state on detection of compromised firmware

Ability to rollback firmware

Secure erase of NAND/User data

TPM (Trusted Platform Module) 1.2 option

TPM (Trusted Platform Module) 2.0 option

Bezel Locking Kit option

Chassis Intrusion detection option

Warranty

This product is covered by a global limited warranty and supported by HPE Services and a worldwide network of HPE

at: http://h17007.www1.hpe.com/us/en/enterprise/servers/warranty/.

Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HPE Pointnext operational services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.

NOTE: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response.

Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have Hewlett Packard Enterprise replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Optional Features

Page 13

Server Management

HPE iLO Advanced

HPE iLO Advanced licenses offer smart remote functionality without compromise, for all HPE

and scripted virtual media and virtual folders. You can also activate the enhanced security and

http://www.hpe.com/servers/iloadvanced.

HPE iLO Advanced

HPE iLO Advanced Premium Security Edition for iLO 5 includes iLO Advanced License plus

http://www.hpe.com/servers/ilopremium

HPE OneView Advanced

HPE OneView brings a new level of automation to infrastructure management by taking a

visit http://www.hpe.com/info/oneview.

HPE Insight Cluster

HPE Insight Cluster Management Utility is a HyperScale management framework that

infrastructure. Learn more at http://www.hpe.com/info/cmu.

Accelerator and GPGPU Information

Hewlett Packard Enterprise supports various accelerators on select HPE Proliant servers to support different workloads. The

as HPE Insight Cluster Management Utility.

Rack and Power Infrastructure

The story may end with servers, but it starts with the foundation that makes compute go – and business grow. We’ve reinvented

HPE Rack and Power Infrastructure.

ProLiant servers. The license includes the full integrated remote console, virtual keyboard, video, and mouse (KVM), multi-user collaboration, console record and replay, and GUI-based

power management functionality. Learn more about HPE iLO Advanced at

Premium Security Edition

high-end security modes, unique security capabilities, like Automatic FW recovery; Runtime FW verification, and Secure erase. Learn more about HPE iLO Advanced Premium Security Edition at:

template driven approach to provisioning, updating, and integrating compute, storage, and networking infrastructure. It provides full-featured licenses which can be purchased for managing Gen8, Gen9 and Gen10 servers. To learn more

Management Utility (CMU)

includes software for the centralized provisioning, management and monitoring of nodes and

accelerators enable seamless integration of GPU computing with HPE ProLiant servers for high-performance computing, large data center graphics, deep learning and virtual desktop deployments. These accelerators deliver all of the standard benefits of GPU computing while enabling maximum reliability and tight integration with system monitoring and management tools such

our entire portfolio of rack and power products to make IT infrastructure more secure, more practical, and more efficient. In other words, we’ve created a stronger, smarter, and simpler infrastructure to help you get the most out of your IT equipment. As an industry leader, Hewlett Packard Enterprise is uniquely positioned to address the key concerns of power, cooling, cable management and system access.

HPE G2 Advanced and Enterprise Racks are perfect for the server room or today’s modern data center with enhanced airflow and thermal management, flexible cable management, and a 10 year Warranty to support higher density computing.

HPE G2 PDUs offer reliable power in flexible form factors that operate at temperatures up to 60°C, include color-coded outlets and load segments and a low-profile design for optimal access to the rack and support for dense rack environments.

HPE Uninterruptible Power Systems are cost-effective power protection for any type workload. Some UPSs include options for remote management and extended runtime modules so you’re critical dense data center is covered in power outages.

HPE KVM Solutions include a console and switches designed to work with your server and IT equipment reliably. We’ve got a cost-effective KVM switch for your first rack and multiple connection IP switches with remote management and security capabilities to keep your data center rack up and running.

Learn more about HPE Racks, KVM, PDUs and UPSs at

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Optional Features

Page 14

One Config Simple (SCE)

SCE is a guided self-service tool to help sales and non-technical people provide customers with initial configurations in 3 to 5

https://h22174.www2.hpe.com/SimplifiedConfig/Welcome#

minutes. You may then send the configuration on for configuration help, or use in your existing ordering processes. If you require "custom" rack configuration or configuration for products not available in SCE, please contact Hewlett Packard Enterprise Customer Business Center or an Authorized Partner for assistance.

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Service and Support

Page 15

HPE Pointnext - Service and Support

Protect your business beyond warranty with HPE Pointnext Operational Service

HPE Pointnext provides a comprehensive portfolio including Advisory and Transformational, Professional, and Operational

complex simple.

Connect your devices:

Unlock all of the benefits of your technology investment by connecting your products to Hewlett Packard Enterprise. Achieve

Learn more about getting connected at http://www.hpe.com/services/getconnected.

Recommended Services

HPE Proactive Care* with 6 hour call-to-repair commitment, three year Support Service

HPE Proactive Care gives customers an enhanced call experience. When your products are connected to HPE, Proactive Care

https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855ENW.pdf

HPE Proactive Care* with 24x7 coverage, three year Support Service

HPE Proactive Care gives customers an enhanced call experience. When your products are connected to HPE, Proactive Care

https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855ENW.pdf

HPE Proactive Care* - Next Business Day service, three year Support Service

HPE Proactive Care gives customers an enhanced call experience. When your products are connected to HPE, Proactive Care

ve reports with recommendations and advice.

VMWare, Microsoft, etc.) running on your HPE servers.

Services to help accelerate your digital transformation. From the onset of your transformation journey, Advisory and Transformational Services focus on designing the transformation and creating a solution roadmap. Professional Services specializes in creative configurations with flawless and on-time implementation, and on-budget execution. Finally, operational services provides innovative new approaches like Flexible Capacity and Datacenter Care, to keep your business at peak performance. HPE is ready to bring together all the pieces of the puzzle for you, with an eye on the future, and make the

up to 77%1 reduction in down time, near 100%2 diagnostic accuracy and a single consolidated view of your environment. By connecting, you will receive 24x7monitoring, pre-failure alerts, automatic call logging, and automatic parts dispatch. HPE Proactive Care Service and HPE Datacenter Care Service customers will also benefit from proactive activities to help prevent issues and increase optimization. All of these benefits are already available to you with your server storage and networking products, securely connected to HPE support.

1- IDC 2 – HP CSC reports 2014 – 2015

helps prevent problems and maintains IT stability by utilizing personalized proactive reports with recommendations and advice. This Service combines three years’ proactive reporting and advice with our highest level of hardware support - HPE’s 24x7, six hour hardware call-to-repair. HPE is the only leading manufacturer who makes this level of coverage available as a standard service offering for your most valuable servers. This service also includes collaborative software support for Independent Software Vendors (ISVs), (Red Hat, VMWare, Microsoft, etc.) running on your HPE servers.

helps prevent problems and maintains IT stability by utilizing personalized proactive reports with recommendations and advice This Service combines three years proactive reporting and advice with our 24x7 coverage, four hour hardware response time when there is a problem. This service also includes collaborative software support for Independent Software Vendors (ISVs), (Red Hat, VMWare, Microsoft, etc.) running on your HPE servers.

helps prevent problems and maintains IT stability by utilizing personalized proacti This service combines three years of Hardware Support where an HPE authorized representative will arrive at the Customer's site during the onsite coverage window to begin hardware maintenance service the next coverage day after the service request has been logged. This service also includes collaborative software support for Independent Software Vendors (ISVs), (Red Hat,

QuickSpecs

HPE ProLiant DL385 Generation9 (Gen9)

Service and Support

Page 16

https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855ENW.pdf

*HPE Proactive Care and HPE Proactive Care Advanced require that the customer connect their devices to make the most of

these services and receive all the deliverables.

Parts and Materials

HPE will provide HPE-supported replacement parts and materials necessary to maintain the covered hardware product in

Parts and components that have reached their maximum supported lifetime and/or the maximum usage limitations as set forth

malfunction.

Other related Services

HPE Server Hardware Installation

Provides for the basic hardware installation of HPE branded servers, storage devices and networking options to assist you in

https://www.hpe.com/h20195/V2/GetPDF.aspx/5981-9356EN.pdf

HPE Installation and Startup Service

Provides for the installation of your HPE hardware according to product specifications including options. The HPE service

type (Windows® or Linux).

HPE Datacenter Care service

HPE Datacenter Care helps improve IT stability and security, increase the value of IT, and enable agility and innovation. It is a

rk of repeatable, tested, and globally available services “building blocks.” You can deploy, operate, and evolve

http://www.hpe.com/services/datacentercare

HPE GreenLake Flex Capacity

With HPE GreenLake Flex Capacity, you get the speed, scalability, and economics of the public cloud in the privacy of your data

needed to operate a data center. And retain the advantages that IT provides the

and compliance, and manage the cost of IT. And, you have the option to use the public cloud when needed.

DC for Hyperscale

Datacenter Care for Hyperscale is available for Service Providers and HPC customers who use a scale out approach to

support tailored to their operating model.

HPE Factory Express for Servers and storage

HPE Factory Express offers configuration, customization, integration and deployment services for HPE servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

operating condition, including parts and materials for available and recommended engineering improvements.

in the manufacturer's operating manual, product QuickSpecs, or the technical product data sheet will not be provided, repaired, or replaced as part of these services.

The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced by HPE due to

bringing your new hardware into operation in a timely and professional manner.

delivery technician will connect the product to a LAN as appropriate and enable remote support to allow for automatic case creation for hardware failures. Installation and start up services also includes the installation of one supported operating system

structured framewo your datacenter wherever you are on your IT journey. With HPE Datacenter Care, you benefit from a personalized relationship with HPE via a single point of accountability for HPE and others’ products. For more information, visit

center. Gain the advantages of the public cloud—consumption-based payment, rapid scalability without worrying about capacity constraints. Reduce the “heavy lifting” business (i.e., control, security). Deliver the right user experience, choose the right technology for the business, manage privacy

computing with a high volume homogenous infrastructure and resilient architecture can take advantage of this environment

QuickSpecs

HPE ProLiant DL385 Generation9 (Gen9)

Service and Support

Page 17

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services

configurable network switches.

HPE Service Credits

HPE Service Credits offers flexible services and technical skills to meet your changing IT demands. With a menu of service that

our IT.

Offered as annual credits, you can plan your budgets while proactively responding to your dynamic business.

HPE Education Services

Keep your IT staff trained making sure they have the right skills to deliver on your business outcomes. Book on a class today

http://www.hpe.com/ww/learn

HPE Support Center

The HPE Support Center is a personalized online support portal with access to information, tools and experts to support HPE

For more information: http://www.hpe.com/services.

NOTE: HPE ProLiant DL385 Gen10 Server is covered under the HPE Service Contract applied to the HPE ProLiant Server.

No separate HPE support services need to be purchased.

Warranty and Support Services will extend to include HPE options configured with your server or storage device. The price of

See the specific high value options that require additional support HERE.

as well as individual factory services, such as image loading, asset tagging, and custom packaging. HPE products supported through Factory Express include a wide array of servers and storage: HPE Integrity, HPE ProLiant, HPE Apollo, HPE ProLiant Server Blades, HPE BladeSystem, HPE 9000 servers as well as the MSAxxxx3PAR suite, XP, rackable tape libraries and

is tailored to suit your needs, you get additional resources and specialist skills to help you maintain peak performance of y

and learn how to get the most from your technology investment.

business products. Submit support cases online, chat with HPE experts, access support resources or collaborate with peers.

Learn more http://www.hpe.com/support/hpesc.

HPE's Support Center Mobile App* allows you to resolve issues yourself or quickly connect to an agent for live support. Now, you can get access to personalized IT support anywhere, anytime. HPE Insight Remote Support and HPE Support Center are available at no additional cost with a HPE warranty, HPE Support Service or HPE contractual support agreement.

*HPE Support Center Mobile App is subject to local availability.

support service is not impacted by configuration details. HPE sourced options that are compatible with your product will be covered under your server support at the same level of coverage allowing you to upgrade freely. Installation for HPE options is available as needed. To keep support costs low for everyone, some high value options will require additional support. Additional support is only required on select high value workload accelerators, fibre switches, InfiniBand and UPS batteries over 12KVA.

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Pre

-configured Models

Page 18

1. Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options section

QuickSpecs.

Entry Models

[SKU Number]

878712-B21

878714-B21

P05887-B21

Model Name

Entry LFF

Entry SFF

Entry LFF

Processor

7251 (8-Core, 2.1 GHz, 120W)

Number of Processors

One processor

Memory

16 GB RDIMM DR 2600 MT/s (1x 16 GB)

Network Controller

HPE 1Gb Ethernet 4-Port 331i Adapter plus optional HPE FlexibleLOM or stand up card

Storage Controller

Embedded S100i for 2 x M.2

Array.

Embedded S100i for 2 x M.2

Array.

P408i-a

included.

Hard Drive

None ship as standard

Internal Storage

8 LFF chassis, with 2 SFF bays

2SFF rear)

8 SFF Chassis (upgradeable to

8 LFF chassis, with 2 SFF bays

2SFF rear)

Optical Drive Bay

Optional via Universal Media Bay

(included)

Optional Universal Media Bay

(882097-B21)

Optional via Universal Media Bay

(included)

Optical Drive

None ship as standard

PCI-Express Slots

3-slots (x8, x16, x8) as standard

Power Supply

1x 500W HPE FlexSlot Power

Supply

1x 500W HPE FlexSlot Power

Supply

2x 500W HPE FlexSlot Power

Supply

Fans

4-standard fans

Management

HPE iLO Standard with Intelligent Provisioning (embedded), HPE OneView Standard (requires download);

(require licenses)

Energy Star

2.1 certified

Form Factor

2U Rack, Easy Install rails without CMA

Warranty

3-year parts, 3-year labor, 3-year onsite support with next business day response.

of this QuickSpecs.

2. Hewlett Packard Enterprise does not allow factory integration of options into pre-configured models. Any additional options purchased will be shipped separately.

3. If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section of this

Connectors

E208i-a

NOTE: 8-Port modular Smart

Connectors

E208i-a

NOTE: 8-Port modular Smart

Array.

NOTE: Smart Storage battery

optional (upgradeable to 15LFF

with 4LFF mid and 3LFF rear +

24 SFF front + 6SFF rear)

optional (upgradeable to 15LFF

with 4LFF mid and 3LFF rear +

HPE iLO Advanced, HPE iLO Advanced Premium Security Edition and HPE OneView Advanced

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Pre

-configured Models

Page 19

Base Models

[SKU Number]

878716-B21

878718-B21

878720-B21

Model Name

Base LFF

Base SFF

Base 24SFF

Processor

7251 (8-Core, 2.1 GHz, 85W)

7301 (16-Core, 2.2 GHz, 170W)

7401 (24-Core, 2.0GHz, 170W)

Number of Processors

One processor

Memory

32 GB RDIMM DR 2666 MT/s (2x 16 GB)

Network Controller

HPE 1Gb Ethernet 4-Port 331i Adapter plus optional HPE FlexibleLOM or stand up card

Storage Controller

P816i-a

included.

P408i-a

included.

P408i-a w/Expander

included.

Hard Drive

None ship as standard

Internal Storage

12 LFF chassis (upgradeable to

rear + 2SFF)

8 SFF Chassis (upgradeable to

Optical Drive Bay

Optional via Universal Media

Bay (included)

Optional Universal Media Bay

(882097-B21)

Optional Universal Media Bay

(882097-B21)

Optical Drive

None ship as standard

PCI-Express Slots

3-slots (x8, x16, x8) as standard

Power Supply

1x 800W HPE FlexSlot power

supply

1x 500W HPE FlexSlot power

supply

1x 800W HPE FlexSlot power

supply

Fans

6-High Performance fans

4-standard fans

6-High Performance fans

Management

HPE iLO Standard with Intelligent Provisioning (embedded), HPE OneView Standard (requires

Advanced (require licenses)

Energy Star

2.1 certified

Form Factor

2U Rack, Easy install rails with CMA

Warranty

3-year parts, 3-year labor, 3-year onsite support with next business day response

NOTE: 16-Port modular Smart

NOTE: Smart Storage battery

19LFF with 4LFF mid and 3LFF

download); HPE iLO Advanced, HPE iLO Advanced Premium Security Edition and HPE OneView

Array.

NOTE: 8-Port modular Smart

Array.

NOTE: Smart Storage battery

24 SFF front + 6SFF rear)

NOTE: 8-Port modular Smart

Array.

NOTE: Smart Storage battery

24 SFF front + 6SFF rear)

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Pre

-configured Models

Page 20

Performance Model

High Performance Model

[SKU Number]

878722-B21

878724-B21

Model Name

Performance

High-Performance 24 SFF

Processor

7451 (24-Core, 2.3 GHz, 180W)

7451 (24-Core, 2.0 GHz, 180W)

Number of Processors

Two processors

Memory

64 GB RDIMM DR 2666 MT/s (2x 32 GB)

Network Controller

HPE 1Gb Ethernet 4-Port 331i Adapter plus HPE

Adapter (817749-B21)

HPE 1Gb Ethernet 4-Port 331i Adapter plus HPE

(817709-B21)

Storage Controller

P408i-a

NOTE:

P408i-a w/Expander

NOTE:

Hard Drive

None ship as standard

Internal Storage

8 SFF Chassis (upgradeable to 24 SFF front +

6SFF rear)

24 SFF Chassis

Optical Drive Bay

Universal Media Bay (882097-B21)

Optical Drive

DVD-RW

PCI-Express Slots

8 total: 3-slots (x8, x16, x8) as standard, plus 3 PCIe (x8, x16, x8), 2 PCIe (x8) Tertiary Riser

Kit

Power Supply

2x 800W HPE FlexSlot power supply

Fans

6-High Performance fans

Management

HPE iLO Standard with Intelligent Provisioning (embedded), HPE OneView Standard (requires

Advanced (require licenses)

Energy Star

2.1 certified

Form Factor

2U Rack, Easy Install rails with CMA

Warranty

3-3-3

Ethernet 10/25 Gb 2-port 640FLR-SFP28

NOTE: 8-Port modular Smart Array.

Smart Storage battery included.

Ethernet 25 Gb 2-port 631FLR Adapter

NOTE: 8-Port modular Smart Array.

Smart Storage battery included.

download); HPE iLO Advanced, HPE iLO Advanced Premium Security Edition and HPE OneView

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Smart Buy

Models

Page 21

[SKU Number]

P00323-S01

P00324-S01

P00325-S01

P00326-S01

Model Name

HPE ProLiant DL385

Processor

7251 (8-Core, 2.1 GHz,

120W)

7301 (16-Core, 2.2

GHz, 170W)

7301 (16-Core, 2.2

GHz, 170W)

7451 (24-Core, 2.3

GHz, 180W)

Number of Processors

One processor

Memory

16 GB (1x 16GB

RDIMM 2R 2666 MT/s)

32 GB (2x 16 GB

RDIMM 2R 2666 MT/s)

32 GB (2x 16 GB

RDIMM 2R 2666 MT/s)

64 GB (4x 16 GB

RDIMM 2R 2600 MT/s)

Network Controller

HPE 1Gb Ethernet 4-Port

331i Adapter

HPE 1Gb Ethernet 4-

Port 331i Adapter

HPE 1Gb Ethernet 4-

Port 331i Adapter

HPE 1Gb Ethernet 4-

Port 331i Adapter

Storage Controller

P408i-a + Smart

Expander

P408i-a + Smart

Hard Drive

None ship as standard

Internal Storage

8 SFF chassis

8 LFF chassis

24 SFF Chassis

8 SFF Chassis

Optical Drive

None included

Optional via Universal

Media Bay (included)

None included

PCI-Express Slots

3 PCIe: 1 x16 FH / 2 x8

Power Supply

1x 500W

2x 800W

Fans

4-standard

6-standard

6-High Performance

Management

HPE iLO5

Rail Kit

Easy Install w/o CMA

Energy Star

2.1 certified

Form Factor

2U Rack

Warranty

3-year parts, 3-year labor, 3-year onsite support with next business day response

Gen10 7251 120W 1P

16G-2R P408i-a 8SFF 1x500W US Svr/S-Buy

with standard

heatsink

Storage Battery

Gen10 7301 170W 1P

32G-2R P408i-a 8LFF 1x500W US Svr/S-Buy

with standard

heatsink

Storage Battery

Gen10 7301 170W 1P

32G-2R P408i-a 24SFF

2x800W US Svr/S-Buy

with standard

heatsink

Storage Battery + SAS

Gen10 7451 180W 1P

64G-2R P408i-a 8SFF 2x800W US Svr/S-Buy

with high-

performance

heatsinks

Storage Battery

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Configuration Information

- Factory Integrated Models

Page 22

This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are

Step 1: Base Configuration (choose one of the following configurable models)

CTO Server

HPE ProLiant DL385

Server

HPE ProLiant DL385

Server

SKU Number

878615-B21

878614-B21

878612-B21

878613-B21

TAA SKU

878619-B21

878618-B21

878616-B21

878617-B21

Processor

Not included as standard

DIMM Slots

32-DIMM slots

Storage Controller

Embedded s100i SW RAID for 2 x M.2 SATA support, choice of HPE modular Smart Array and PCIe plug-in

PCIe

Three standard in primary riser

Drive Cage included

Network Controller

HPE 1Gb Ethernet 4-Port 331i Adapter plus optional HPE FlexibleLOM or stand up card

Fans

6-Standard

6-High Performance

4-Standard

6-Performance

Management

HPE iLO with Intelligent Provisioning (standard), iLO Advances and OneView (optional)

USB

1x 3.0 standard plus iLo

front service port

None as standard

1x 3.0 standard plus iLo

front service port

1x 3.0 standard plus iLo

front service port

NOTE: HPE offers multiple Trade Agreement Act (TAA) compliant configurations to meet the needs of US Federal

ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for information on configurable product offerings and requirements.

1. Factory Integrated Models must start with a CTO Server.

2. FIO indicates that this option is only available as a factory installable option.

3. All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives ordered with the server.

4. Some options may not be integrated at the factory. Contact your local sales representative for additional information.

Gen10 8 LFF CTO Server

Gen10 12 LFF CTO

Gen10 8 SFF CTO Server

controller

Gen10 24 SFF CTO

8 LFF 12 LFF 8 SFF 24 SFF

Government customers. These products are either manufactured or substantially transformed in a designated country. TAA compliance is only provided when HPE options are included as part of factory integrated orders (CTO).

NOTE: The HPE ProLiant DL385 Gen10 12 LFF CTO Server ships with the cable required for the P816i-a installation. NOTE:The cables that come standard with the 8SFF chassis for BOX3 work for the first 8 drives, and are connected to the

E208 or the P408. When the 8SFF drive cage for BOX2 or BOX1 is ordered, the cables come with the drive cage kits.

NOTE: All CTO servers are Energy Star 2.1 compliant.

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Configuration Information

- Factory Integrated Models

Page 23

CTO Server

8 SFF CTO Chassis

24 SFF CTO Chassis

8 LFF CTO Chassis

12 LFF CTO Chassis

Included Drive Cage

8 SFF SAS/SATA

3x 8 SFF SAS/SATA

8 LFF + UMB

12 LFF Chassis

Additional drive cages

- - -

Universal Media Bay

1 Optional

Not available

1 Included

Not available

ODD

1 Optional with UMB

Not available

1 Optional

Not available

8 SFF Drive Cage

Up to 2 Optional

Not available

8 NVME/SAS Bay

Up to 3 Optional

Not available

8 NVME Cage

Up to 3 Optional

Not available

2 SFF SAS/SATA (Front)

1 Optional with UMB

Not available

1 Optional

Not available

2 SFF SAS/SATA (Rear)

1 Optional

2 NVMe (Front)

1 Optional with UMB

Not available

1 Optional

Not available

4 LFF Mid-plane

Not available

1 Optional

3 LFF Rear

Not available

1 Optional

NOTE: This aplies to CTO configurations, field upgrades may differ depending field configuration. NOTE: 3x 8 NVMe option on SFF requires the second processor be installed and I/O cards are limited to ALOM options.

Step 2a: Choose Required Options – Processors

(only one of the following unless otherwise noted)

Please select one –L21 processor required below.

NOTE: Processors with greater than 170W will require the High Performance fan kit.

Processor Option Kits

Required Processor

HPE DL385 Gen10 AMD EPYC 7601 (2.2GHz/32-core/180W) FIO Processor Kit

881162-L21

NOTE: Ships with Performance Heatsink.

HPE DL385 Gen10 AMD EPYC 7551 (2.0GHz/32-core/180W) FIO Processor Kit

881163-L21

NOTE: Ships with Performance Heatsink.

HPE DL385 Gen10 AMD EPYC 7501 (2.0GHz/32-core/155-170W) FIO Processor Kit

881164-L21

NOTE: Ships with Standard Heatsink.

HPE DL385 Gen10 AMD EPYC 7451 (2.3GHz/24-core/180W) FIO Processor Kit

881165-L21

NOTE: Ships with Performance Heatsink.

HPE DL385 Gen10 AMD EPYC 7401 (2.0GHz/24-core/155-170W) FIO Processor Kit

881166-L21

NOTE: Ships with Standard Heatsink.

HPE DL385 Gen10 AMD EPYC 7351 (2.4GHz/16-core/155-170W) FIO Processor Kit

881169-L21

NOTE: Ships with Standard Heatsink.

HPE DL385 Gen10 AMD EPYC 7301 (2.2GHz/16-core/155-170W) FIO Processor Kit

881170-L21

NOTE: Ships with Standard Heatsink.

HPE DL385 Gen10 AMD EPYC 7251 (2.1GHz/8-core/120W) FIO Processor Kit

881171-L21

NOTE: Ships with Standard Heatsink.

HPE DL385 Gen10 AMD EPYC 7281 (2.1GHz/16-core/155-170W) FIO Processor Kit

P00645-L21

For second processor, please select the same processor model with –B21 from Core Options – HPE Processors section. For example: first processor, select 881162-L21 then for second processor, select 881162-B21.

NOTE: 8SFF CTO 1P models ship with 4 standard fans. The second processor option kit contains 2 additional fans. 12 LFF and 24 SFF CTO Servers ship with 6 High performance fans included; 8LFF CTO Servers ship with 6 Standard fans included. High performance fan kit is available to meet ambient temperature environments are are required for rear drives or NVMe configurations. NVMe is limited to front install only.

NOTE: Mixing of 2 different processor models are NOT allowed. NOTE: DDR4 memory speed will depend on the quantity and type of DIMMs installed. NOTE: Processors with greater than 170W will ship with the High Performance heatsink.

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Configuration Information

- Factory Integrated Models

Page 24

NOTE: Ships with Standard Heatsink.

Step 2b: Choose Memory Options

Please select one or more memory from below.

NOTE: The maximum memory speed is a function of the memory type, memory configuration, and processor model.

HPE 8GB (1x8GB) Single Rank x8 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit

838079-B21

HPE 16GB (1x16GB) Single Rank x4 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit

838081-B21

HPE 16GB (1x16GB) Dual Rank x8 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit

838089-B21

HPE 32GB (1x32GB) Dual Rank x4 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit

838083-B21

HPE 64GB (1x64GB) Quad Rank x4 DDR4-2666 CAS-19-19-19 Load Reduced Smart Memory Kit

838085-B21

HPE 128GB (1x128GB) Octal Rank x4 DDR4-2666 CAS-22-19-19 3DS Load Reduced Smart Memory Kit

838087-B21

Step 2c: Choose Power Supplies

Select one or two power supplies from below.

NOTE:

HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

865408-B21

HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit

865438-B21

HPE 800W Flex Slot Universal Hot Plug Low Halogen Power Supply Kit

865428-B21

HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

865414-B21

HPE 800W Flex Slot -48VDC Hot Plug Low Halogen Power Supply Kit

865434-B21

HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

830272-B21

NOTE: Select one or more power supplies. For 800W, 4 power supplies need to be selected.

IEC power cord used for rack mounting with Power

Step 3: Choose Additional Factory Integratable Options

One of the following from each list may be selected if desired at time of factory integration

HPE Riser Options

NOTE: DL385 has support for 4x NMVE drives when the second CPU is selected. NVME cable

871827-B21 is required and supports 2 drives each.

HPE DL38X Gen10 Slot 1/2 x16/x16 FIO Riser Kit

871674-B21

NOTE: Slot 1 or 2 in Primary location.

NOTE: Bus width x16, x16, Connector Width x16, x16.

HPE DL38X Gen10 x16/x16 GPU Slot2/3 FIO Riser Kit

871676-B21

NOTE: Primary Riser, Connector in slot 2 & 3 for GPU support.

NOTE:

HPE DL38X Gen10 x8/x8/x8 1-port 2 NVMe Slim SAS FIO Riser Kit

871673-B21

NOTE: Supports 3x 8 and 1-port for NVMe. NOTE: Supports Full Height and half-length cards.

For new Gen10 memory population rule whitepaper and optimal memory performance guidelines, please go to: http://www.hpe.com/docs/amd-population-rules For Gen10 memory speed table, please go to: http://www.hpe.com/docs/amd-speed-tables

NOTE: Memory DIMM availability with a server platform is dependent upon completion of certification testing.

Mixing of 2 different power supplies is NOT allowed.

NOTE: 1600W Power supplies only support high line voltage (200VAC to 240VAC). NOTE: Prior to making a power supply selection it is highly recommended that the HPE Power

Advisor is run to determine the right size power supply for your server configuration. The HPE Power Advisor is located at: http://www.hpe.com/info/hppoweradvisor

NOTE: All power supplies in a server should match. Mixing Power Supplies is not supported. NOTE: HPE ProLiant servers ship with an IEC-

Distribution Units (PDUs). Visit HPE power cords for a full list of optional power cords.

NOTE: Supports Full Height and Full length cards.

Bus width x16, x16, Connector Width x16, x16.

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Configuration Information

- Factory Integrated Models

Page 25

NOTE: Bus width x8, x8, x8 Connector Width x8, x8, x8.

HPE DL38X Gen10 4-port 8 NVMe Primary Slim SAS FIO Riser

867807-B21

NOTE: Riser supporting up to 8 NVMe drives in Primary location.

NOTE: To achieve max 204 NVMe support, connect 4 NVMe drives to the tertiary riser.

HPE Unique Options

HPE 4 NVMe Box 1 Instr Spec FIO

878186-B21

HPE 2 NVMe Instr Spec FIO

878189-B21

NOTE: This is a factory integrated only option.

compatibility the 3 POS cable

kit must also be selected (882100-B21).

HPE 6+2 NVMe Instr Spec FIO

878192-B21

NOTE: This is a factory integrated only option.

selection supports it, or the 3POS cable is selected for S100i connection.

HPE 8SFF Front Remove SPEC Perf FIO

873763-B21

NOTE: This is a factory integrated only option. NOTE: Will remove the Primary 8SFF cage in Box 3 of the 8SFF and replace with a Box blank.

HPE Riser Remove SPEC FIO

873766-B21

NOTE: This is a factory integrated only option. NOTE: Will remove the Primary shipping PCIe riser.

HPE Legacy FIO Mode Setting

758959-B22

NOTE: UEFI is the default, this FIO part can be used for CTO to enable Legacy mode.

HPE Memory Fast Fault Tolerance FIO Kit

875293-B21

NOTE: Fast Fault Tolerance is a new feature in Gen10 server memory that enables the system to boot with full memory performance while monitoring for DRAM device failures.

Step 4: Choose additional options for Factory Integration from Core and Additional Options sections below

NOTE: This can be connected to an 8SFF NVMe drive cage in box 3.

NOTE: This will connect 2 SFF cage installed in the front of the chassis to NVMe. NOTE: This supports NMVe only, if desired, to maintain SATA drive

NOTE: Indicates the cage will also have an NVMe connection. NOTE: When NVME is selected, the SAS/SATA will no longer function unless the controller

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Core

Options

Page 26

NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for additional information.

HPE Unique Options

HPE DL38X NVMe 8 Solid State Drive Express Bay Enablement Kit

826689-B21

NOTE: This option provides support for up to 8 NVMe drives, and can only be populated in Box 1, Box 2

NOTE:

HPE DL385 Gen10 Universal Media Bay Kit

882097-B21

NOTE: The HPE DL385 Gen10 Universal Media bay provides front Display Port and 2xUSB 2.0; plus

HPE DL38X Gen10 Premium 6 SFF SAS/SATA + 2 NVMe or 8 SFF SAS/SATA Bay Kit

826690-B21

NOTE: This kit can be supported in Box 1, 2 or 3 and provides support for up to 8 SFF SAS/SATA or 6

for 1P. 2P enables the on board NVMe connection with

NOTE: When adding to Box 1 the addition of the High Performance Fan kit (867810-B21) is required.

HPE DL385 Gen10 High Performance Heatsink Kit

882098-B21

NOTE: Required for GPU installations. NOTE:

HPE DL38X Gen10 High Performance Temperature Fan Kit

867810-B21

NOTE: This kit is also required to support GPUs configurations.

NOTE: This kit is required when Box 1, 2 and 3 are populated.

HPE DL38X Gen10 2SFF HDD SAS/SATA Riser Kit

826688-B21

NOTE: 2 SFF in the rear is only supported with a 24 SFF model or 12 LFF model.

NOTE:

HPE DL38X Gen10 2SFF Premium HDD Front NVMe or Front/Rear SAS/SATA Kit

826687-B21

NOTE: Supports 2SFF SAS/SATA/NVMe in Universal Media bay (882097-B21).

cable 871827-B21 for the on board NVMe connections.

and Box 3 of the SFF chassis.

NOTE: The HPE DL385 Gen10 High Performance fan kit is required for NVMe support (867810-B21). NOTE: The HPE DL38X Gen10 4-port 8 NVMe SlimSAS Riser (867807-B21) is required to support this. NOTE: If BOX 1, 2 and 3 are populated for full 24 drive NVMe support this requires 3 risers (1st 867807-

B21, 2nd 873732-B21, & 3rd 867808-B21) and the on board NVMe connections with 2x NVMe cable (871827-B21).

There are limitations on GPU support with the NVMe bay installed.

support for 2x SFF front drives or 2 NVMe front drives (826687-B21 and NVMe riser required see note below) and ODD support (Not included); and can only be located in Box1 in either an 8 SFF or 8+8 SFF model.

NOTE: This is a SFF model option only. NOTE: For support of the 2 NVMe drives this will require the addition of the HPE DL38X Gen10 x8/x8/x8

1-port 2 NVMe SlimSAS Riser (867806-B21) for 1P configurations. NOTE: For 2P configurations the HPE DL38X Gen10 2-port 4 NVMe SlimSAS Riser (867808-B21) is needed or the NVMe cable (871827-B21) with the on board NVMe connections may be used.

SAS/SATA + 2 NVMe drives per Box. NOTE: With NVMe drives a specific riser is required the NVMe cable 871827-B21 or this can be enabled with NMVe risers.

NOTE: When adding to Box 1 the addition of the High Performance Fan kit (867810-B21) is required. NOTE: This kit can be supported in Box 1, 2 or 3 and provides support for up to 8 SFF SAS/SATA or 6

SAS/SATA + 2 NVMe drives per Box. NOTE: With NVMe drives a specific riser is required for 1P only. 2P enables on board NVME connections.

Processor kits above 170W include a High Performance Heatsink.

NOTE: This is required for NVMe configurations. NOTE: This kit provides maximum cooling for your Server.

NOTE: In the rear this leaves 1x16 slot accessible.

Rear drives require the addition of the High Performance Fan kit (867810-B21) .

NOTE: NVMe drives require the addition of the High Performance Fan kit (867810-B21). NOTE: NVMe drives require the addition of an NVMe capable riser or a 2P configuration and the NVMe

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Core Options

Page 27

NOTE: To maintain SATA compatibility with NVMe connections, the 3 POS cable (882100-B21) must also

NOTE:

HPE DL38X Gen10 8LFF Front 2SFF SAS/SATA HDD Kit

867805-B21

NOTE: Adds support for 2 SFF in front of 8 LFF chassis (878615-B21).

HPE DL38X Gen10 8LFF Front 2NVMe HDD Bay Kit

873781-B21

NOTE: Supports 2 NVMe in the Universal Media bay (included) on the 8 LFF model.

NOTE: NVMe drives require the addition of the High Performance Fan kit (867810-B21).

HPE DL38X Gen10 12Gb SAS Expander Card Kit with Cables

870549-B21

NOTE: SAS expander to enable 24 SFF field upgrade. NOTE: Primary population in slot 3 of the primary riser.

HPE DL385 Gen10 System Insight Display Kit

882099-B21

NOTE: Systems Insight Display no longer ships as standard but is available as a Factory Integrated or field upgrade option.

HPE DL3XX Gen10 Rear Serial Cable and Enablement Kit

873770-B21

HPE Processors

Processor Option Kits

HPE DL385 Gen10 AMD EPYC - 7601 (2.2GHz/32-core/180W) Processor Kit

881162-B21

NOTE: Ships with Performance Heatsink.

HPE DL385 Gen10 AMD EPYC - 7551 (2.0GHz/32-core/180W) Processor Kit

881163-B21

NOTE: Ships with Performance Heatsink.

HPE DL385 Gen10 AMD EPYC - 7501 (2GHz/32-core/155-170W) Processor Kit

881164-B21

NOTE: Ships with Standard Heatsink.

HPE DL385 Gen10 AMD EPYC - 7451 (2.3GHz/24-core/180W) Processor Kit

881165-B21

NOTE: Ships with Performance Heatsink.

HPE DL385 Gen10 AMD EPYC - 7401 (2GHz/24-core/155-170W) Processor Kit

881166-B21

NOTE: Ships with Standard Heatsink.

HPE DL385 Gen10 AMD EPYC - 7351 (2.4GHz/16-core/155-170W) Processor Kit

881169-B21

NOTE: Ships with Standard Heatsink.

HPE DL385 Gen10 AMD EPYC - 7301 (2.2GHz/16-core/155-170W) Processor Kit

881170-B21

NOTE: Ships with Standard Heatsink.

HPE DL385 Gen10 AMD EPYC - 7281 (2.1GHz/16-core/155-170W) Processor Kit

P00645-B21

NOTE: Ships with Standard Heatsink.

HPE DL385 Gen10 AMD EPYC - 7251 (2.1GHz/8-core/120W) Processor Kit

881171-B21

NOTE: Ships with Standard Heatsink.

NOTE: DDR4 memory speed will depend on the quantity and type of DIMMs installed.

High Performance fan kit that comes with 6 fans.

be used. NOTE: Drive cage can be used in the rear of the chassis, but will not support NVMe drives rear.

Supports uFF drives.

NOTE: For support of the 2 NVMe drives this will require the addition of the HPE DL38X Gen10 x8/x8/x8 1-port 2 NVMe SlimSAS Riser (867806-B21) for 1P configurations. NOTE; For 2P configurations the HPE DL38X Gen10 2-port 4 NVMe SlimSAS Riser (867808-B21) is needed or the NVME cable 871827-B21 with the on board NVMe connections may be used.

NOTE: The xxxxxx-B21 is the 2nd processor and ships with 2 additional fans for factory or field installation. NOTE: Processors above 170W use a High Performance Heatsink and the high performance fan kit (867810-B21). NOTE: Processors with greater than 170W do not include the fans as the selection of processors above 170W requires the

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Core Options

Page 28

Memory Selection

http://www.hpe.com/products/recommend.

HPE Memory

HPE 8GB (1x8GB) Single Rank x8 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit

838079-B21

HPE 16GB (1x16GB) Single Rank x4 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit

838081-B21

HPE 16GB (1x16GB) Dual Rank x8 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit

838089-B21

HPE 32GB (1x32GB) Dual Rank x4 DDR4-2666 CAS-19-19-19 Registered Smart Memory Kit

838083-B21

HPE 64GB (1x64GB) Quad Rank x4 DDR4-2666 CAS-19-19-19 Load Reduced Smart Memory Kit

838085-B21

HPE 128GB (1x128GB) Octal Rank x4 DDR4-2666 CAS-22-19-19 3DS Load Reduced Smart Memory Kit

838087-B21

NOTE: Memory DIMM availability with a server platform is dependent upon completion of certification

processor model.

HPE Optical Drives

HPE 9.5mm SATA DVD-ROM Optical Drive

726536-B21

NOTE: The Universal Media Bay (882097-B21) is required for this option on a SFF model. No support in 12

NOTE: Not supported anytime the 3 POS cable (882100-B21) is selected.

HPE 9.5mm SATA DVD-RW Optical Drive

726537-B21

NOTE: The Universal Media Bay (882097-B21) is required for this option on a SFF model. No support in 12

NOTE:

HPE Mobile USB DVD-RW Optical Drive

701498-B21

NOTE: This is only supported on USB 3.0 ports.

HPE Drives

Enterprise - 12G SAS - SFF Drives

HPE 300GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD

870753-B21

HPE 300GB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD

872475-B21

HPE 600GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD

870757-B21

HPE 600GB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD

872477-B21

HPE 900GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD

870759-B21

HPE 900GB SAS 12G Enterprise 15K SFF (2.5in) SC 3yr Wty 512e Digitally Signed Firmware HDD

870765-B21

HPE 1.2TB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty Digitally Signed Firmware HDD

872479-B21

HPE 1.8TB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty 512e Digitally Signed Firmware HDD

872481-B21

HPE 2.4TB SAS 12G Enterprise 10K SFF (2.5in) SC 3yr Wty 512e Digitally Signed Firmware HDD

881457-B21

Midline - 12G SAS - SFF Drives

HPE 1TB SAS 12G Midline 7.2K SFF (2.5in) SC 1yr Wty Digitally Signed Firmware HDD

832514-B21

HPE 1TB SAS 12G Midline 7.2K SFF (2.5in) SC 1yr Wty 512e Digitally Signed Firmware HDD

765464-B21

HPE 2TB SAS 12G Midline 7.2K SFF (2.5in) SC 1yr Wty 512e HDD

765466-B21

Midline - 12G SAS - LFF Drives

HPE 1TB SAS 12G Midline 7.2K LFF (3.5in) SC 1yr Wty Digitally Signed Firmware HDD

846524-B21

HPE 2TB SAS 12G Midline 7.2K LFF (3.5in) SC 1yr Wty Digitally Signed Firmware HDD

872485-B21

HPE 4TB SAS 12G Midline 7.2K LFF (3.5in) SC 1yr Wty Digitally Signed Firmware HDD

872487-B21

HPE 6TB SAS 12G Midline 7.2K LFF (3.5in) SC 1yr Wty Digitally Signed Firmware HDD

846514-B21

HPE 6TB SAS 12G Midline 7.2K LFF (3.5in) SC 1yr Wty 512e HDD

861754-B21

HPE 8TB SAS 12G Midline 7.2K LFF (3.5in) SC 1yr Wty Helium 512e Digitally Signed Firmware HDD

861590-B21

HPE 8TB SAS 12G Midline 7.2K LFF (3.5in) SC 1yr Wty 512e Digitally Signed Firmware HDD

819201-B21

HPE 10TB SAS 12G Midline 7.2K LFF (3.5in) SC 1yr Wty Helium 512e Digitally Signed Firmware HDD

857644-B21

To streamline the configuration process for HPE ProLiant Gen10 servers and to provide the best product availability, HPE recommends memory from the list located here:

testing. NOTE: The maximum memory speed is a function of the memory type, memory configuration, and

LFF or 24 SFF models.

Not supported anytime the 3 POS cable (882100-B21) is selected.

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Core Options

Page 29

HPE 12TB SAS 12G Midline 7.2K LFF (3.5in) SC 1yr Wty Helium 512e Digitally Signed Firmware HDD

881779-B21

Midline - 6G SATA - SFF Drives

HPE 1TB SATA 6G Midline 7.2K SFF (2.5in) SC 1yr Wty Digitally Signed Firmware HDD

655710-B21

HPE 2TB SATA 6G Midline 7.2K SFF (2.5in) SC 1yr Wty 512e Digitally Signed Firmware HDD

765455-B21

Midline - 6G SATA - LFF Drives

HPE 1TB SATA 6G Midline 7.2K LFF (3.5in) SC 1yr Wty HDD

861691-B21

HPE 2TB SATA 6G Midline 7.2K LFF (3.5in) SC 1yr Wty Digitally Signed Firmware HDD

872489-B21

HPE 4TB SATA 6G Midline 7.2K LFF (3.5in) SC 1yr Wty Digitally Signed Firmware HDD

872491-B21

HPE 6TB SATA 6G Midline 7.2K LFF (3.5in) SC 1yr Wty 512e HDD

861750-B21

HPE 8TB SATA 6G Midline 7.2K LFF (3.5in) SC 1yr Wty 512e Digitally Signed Firmware HDD

819203-B21

HPE 8TB SATA 6G Midline 7.2K LFF (3.5in) SC 1yr Wty Helium 512e Digitally Signed Firmware HDD

861594-B21

HPE 10TB SATA 6G Midline 7.2K LFF (3.5in) SC 1yr Wty Helium 512e Digitally Signed Firmware HDD

857648-B21

HPE 12TB SATA 6G Midline 7.2K LFF (3.5in) SC 1yr Wty Helium 512e Digitally Signed Firmware HDD

881785-B21

SSD Selection

http://www.hpe.com/products/recommend

Read Intensive - 12G SAS - SFF - Solid State Drives

HPE 480GB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

875311-B21

HPE 960GB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

872390-B21

HPE 960GB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

875313-B21

HPE 1.92TB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

872392-B21

HPE 1.92TB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

875326-B21

HPE 3.84TB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

872394-B21

HPE 3.84TB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

875330-B21

HPE 7.68TB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

870144-B21

HPE 15.3TB SAS 12G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

870148-B21

Mixed Use - 12G SAS - SFF - Solid State Drives

HPE 400GB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

872374-B21

HPE 400GB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

873359-B21

HPE 800GB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

872376-B21

HPE 800GB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

873363-B21

HPE 1.6TB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

872382-B21

HPE 1.6TB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

873365-B21

HPE 3.2TB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

872386-B21

HPE 3.2TB SAS 12G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

873367-B21

HPE 3.84TB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

P00896-B21

Write Intensive - 12G SAS - SFF - Solid State Drives

HPE 400GB SAS 12G Write Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

873351-B21

HPE 800GB SAS 12G Write Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

873355-B21

HPE 1.6TB SAS 12G Write Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

873357-B21

Mixed Use - 12G SAS - LFF - Solid State Drives

HPE 800GB SAS 12G Mixed Use LFF (3.5in) SCC 3yr Wty Digitally Signed Firmware SSD

872378-B21

Mixed Use - 6G SATA - SFF - Solid State Drives

HPE 240GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

875483-B21

HPE 480GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

875470-B21

HPE 960GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

875474-B21

HPE 1.92TB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

875478-B21

To streamline the configuration process for HPE ProLiant Gen10 servers and to provide the best product availability, HPE recommends SSDs from the list located here:

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Core Options

Page 30

Mixed Use - 6G SATA - LFF - Solid State Drives

HPE 480GB SATA 6G Mixed Use LFF (3.5in) SCC 3yr Wty Digitally Signed Firmware SSD

875472-B21

HPE 960GB SATA 6G Mixed Use LFF (3.5in) SCC 3yr Wty Digitally Signed Firmware SSD

P03691-B21

HPE 960GB SATA 6G Mixed Use LFF (3.5in) SCC 3yr Wty Digitally Signed Firmware SSD

875476-B21

HPE 1.92TB SATA 6G Mixed Use LFF (3.5in) SCC 3yr Wty Digitally Signed Firmware SSD

875480-B21

Read Intensive - 6G SATA - SFF - Solid State Drives

HPE 240GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

877740-B21

HPE 480GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

875509-B21

HPE 480GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

877746-B21

HPE 960GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

875511-B21

HPE 960GB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

877752-B21

HPE 1.92TB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

875513-B21

HPE 1.92TB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

877758-B21

HPE 3.84TB SATA 6G Read Intensive SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

877764-B21

Mixed Use - 6G SATA - SFF - Solid State Drives

HPE 240GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

880295-B21

HPE 480GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

877776-B21

HPE 960GB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

877782-B21

HPE 1.92TB SATA 6G Mixed Use SFF (2.5in) SC 3yr Wty Digitally Signed Firmware SSD

877788-B21

Mixed Use - 6G SATA - LFF - Solid State Drives

HPE 960GB SATA 6G Mixed Use LFF (3.5in) SCC 3yr Wty Digitally Signed Firmware SSD

877784-B21

HPE 1.92TB SATA 6G Mixed Use LFF (3.5in) SCC 3yr Wty Digitally Signed Firmware SSD

877790-B21

Read Intensive – 6G SATA uFF - Solid State Drives

HPE Dual 150GB SATA Read Intensive M.2 - UFF to SFF SCM 3yr Wty Digitally Signed Firmware SSD

880875-B21

HPE Dual 480GB SATA Read Intensive M.2 - UFF to SFF SCM 3yr Wty Digitally Signed Firmware SSD

880877-B21

Read Intensive - NVMe - SFF - Solid State Drives

HPE 480GB NVMe x4 Lanes Read Intensive SFF (2.5in) SCN 3yr Wty Digitally Signed Firmware SSD

875587-B21

HPE 960GB NVMe x4 Lanes Read Intensive SFF (2.5in) SCN 3yr Wty Digitally Signed Firmware SSD

875589-B21

HPE 1.92TB NVMe x4 Lanes Read Intensive SFF (2.5in) SCN 3yr Wty Digitally Signed Firmware SSD

875591-B21

Mixed Use - NVMe - SFF - Solid State Drives

HPE 400GB NVMe x4 Lanes Mixed Use SFF (2.5in) SCN 3yr Wty Digitally Signed Firmware SSD

875593-B21

HPE 800GB NVMe x4 Lanes Mixed Use SFF (2.5in) SCN 3yr Wty Digitally Signed Firmware SSD

875595-B21

HPE 1.6TB NVMe x4 Lanes Mixed Use SFF (2.5in) SCN 3yr Wty Digitally Signed Firmware SSD

875597-B21

HPE 3.2TB NVMe x4 Lanes Mixed Use SFF (2.5in) SCN 3yr Wty Digitally Signed Firmware SSD

877998-B21

Hard Drive Blank Kits

HPE Universal SATA HHHL 3yr Wty M.2 Kit

878783-B21

NOTE: This is a M.2 enablement standup card.

HPE Large Form Factor Hard Drive Blank Kit

666986-B21

HPE Small Form Factor Hard Drive Blank Kit

666987-B21

Hard Drive Kits

HPE DL38X Gen10 3LFF Rear SAS/SATA Drive Kit

826685-B21

NOTE: This is supported in the LFF model only. NOTE:

HPE DL385 Gen10 4 Large Form Factor Mid-Plane Hard Drive Carrier

882096-B21

NOTE: Supported with both the 8 and 12 LFF model.

NOTE: This requires High Performance Fans (867810-B21).

HPE DL38X Gen10 2SFF Premium HDD Front NVMe or Front/Rear SAS/SATA Kit

826687-B21

NOTE: Supports 2SFF SAS/SATA/NVMe in Universal Media bay (882097-B21).

3 LFF rear drives will consume the 2nd riser expansion slot.

NOTE: With this mid-tray only single-wide (8.5-inch cards with connections or less) cards are supported. NOTE: This drive does support hot-swap drives.

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Core Options

Page 31

NOTE: NVMe drives require the addition of the High Performance Fan kit (867810-B21).

used as well.

HPE DL38X Gen10 2SFF HDD SAS/SATA Riser Kit

826688-B21

NOTE: Supports 2 SFF rear in Riser1 or 2 location – max 2 supported SFF model.

maximum of one in riser 1 location.

NOTE: Supports uFF drives.

HPE DL38X NVMe 8 Solid State Drive Express Bay Enablement Kit

826689-B21

NOTE: This option provides support for up to 8NVMe drives, and can be populated in all Boxes in the 8 SFF

NOTE: Supporting 24 NMVe limits I/O support to the ALOM slot.

HPE DL38X Gen10 Premium 6 SFF SAS/SATA + 2 NVMe or 8 SFF SAS/SATA Bay Kit

826690-B21

NOTE: This option provides supports for up to 8 SAS/SATA SFF drives or a combination of 6 SATA/SATA

the addition of the High Performance Fan kit (867810-B21).

HPE DL38X Gen10 SFF Box1/2 Cage/Backplane Kit

826691-B21

NOTE: Supports 8 SAS/SAFA SFF drives in Box 1 or 2 to a max of 24 SFF SAS/SATA front.

HPE DL38X Gen10 8LFF Front 2SFF SAS/SATA HDD Kit

867805-B21

NOTE: For 2 SFF SAS/SATA in UMB on 8 LFF model only.

HPE DL38X Gen10 8LFF Front 2NVMe HDD Bay Kit

873781-B21

NOTE: Supports 2 NVMe in the Universal Media bay (included) on the 8 LFF model.

NOTE: NVMe drives require the addition of the High Performance Fan kit (867810-B21).

Media Bay Kits

HPE DL385 Gen10 Universal Media Bay Kit

882097-B21

NOTE: The HPE DL385 Gen10 Universal Media bay provides front Display Port and 2xUSB 2.0; plus

needed or the NVMe cable (871827-B21) with the on board NVMe connections may be used.

NOTE: NVMe drives require the addition of an NVMe capable riser, or a 2P configuration and the NVMe cable 871827-B21 for the on boards NVMe connection.

NOTE: To maintain SATA compatibility with NVMe connections, the 3 POS cable (882100-B21) must be

NOTE: Supports 2 SFF rear in Riser1 or 2 location in LFF model. Note is 3 LFF rear option is selected

model.

NOTE: A maximum of 24 NVMe drives only are supported. NOTE: This will require the HPE DL38X Gen10 4-port 8 NVMe SlimSAS Riser (867807-B21). NOTE: A maximum of 24 NVMe drives are supported. NOTE: For full 24 drive NVMe support this requires 3 risers; 1st (867807-B21), 2nd (873732-B21) & 3rd

(867808-B21) and the on board NVMe conntections with 2x NVMe cable (871827-B21).

and 2 NVMe drives in the same cage, and can be populated in all Boxes in the SFF model. NOTE: For support of the 2 NVMe drives this will require the addition of the HPE DL38X Gen10 x8/x8/x8 1-port 2 NVMe SlimSAS Riser (867806-B21) for 1P configurations. NOTE; For 2P configurations the HPE DL38X Gen10 2-port 4 NVMe SlimSAS Riser (867808-B21) or the NVME cable (871827-B21) with the on board NVMe connections me be used. NOTE: NVMe drives require

NOTE: For support of the 2 NVMe drives this will require the addition of the HPE DL38X Gen10 x8/x8/x8 1-port 2 NVMe SlimSAS Riser (867806-B21) for 1P configurations. NOTE: For 2P configurations the HPE DL38X Gen10 2-port 4 NVMe SlimSAS Riser (867808-B21) is needed or the NVMe cable (871827-B21) with the on board NVMe connections may be used.

support for 2x SFF front drives or 2 NVME front drives (826687-B21 and NVMe riser required see notes below)and ODD support (Not included); and can only be located in Box1 in either an 8 SFF or 8+8 SFF model.

NOTE: This is a SFF model option only. NOTE: For support of the 2 NVMe drives this will require the addition of the HPE DL38X Gen10 x8/x8/x8

1-port 2 NVMe SlimSAS Riser (867806-B21) for 1P configurations.

NOTE: For 2P configurations the HPE DL38X Gen10 2-port 4 NVMe SlimSAS Riser (867808-B21) is

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Core Options

Page 32

HPE Networking

1 Gigabit Ethernet adapters

HPE Ethernet 1Gb 4-port 331T Adapter

647594-B21

HPE Ethernet 1Gb 2-port 332T Adapter

615732-B21

HPE Ethernet 1Gb 2-port 361T Adapter

652497-B21

HPE Ethernet 1Gb 4-port 366T Adapter

811546-B21

10 Gigabit Ethernet adapters

HPE Ethernet 10Gb 2-port 521T Adapter

867707-B21

HPE Ethernet 10Gb 2-port 535T Adapter

813661-B21

HPE Ethernet 10Gb 2-port 562SFP+ Adapter

727055-B21

25 Gigabit Ethernet adapters

HPE Ethernet 10/25Gb 2-port 631SFP28 Adapter

817718-B21

HPE Ethernet 10/25Gb 2-port 640SFP28 Adapter

817753-B21

HPE Ethernet 10/25Gb 2-port 621SFP28 Adapter

867328-B21

NOTE: The DL385 Gen10 ships with 4x 1 Gb Embedded.

http://www.hpe.com/us/en/product-catalog/servers/server-adapters.hits-12.html.

FlexibleLOM adapters

HPE Ethernet 1Gb 4-port 331FLR Adapter

629135-B22

HPE Ethernet 1Gb 4-port 366FLR Adapter

665240-B21

HPE Ethernet 10Gb 2-port 535FLR-T Adapter

817721-B21

HPE FlexFabric 10Gb 4-port 536FLR-T Adapter

764302-B21

HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter

727054-B21

HPE Ethernet 10/25Gb 2-port 631FLR-SFP28 Adapter

817709-B21

HPE Ethernet 10/25Gb 2-port 640FLR-SFP28 Adapter

817749-B21

HPE Ethernet 10/25Gb 2-port 622FLR-SFP28 Converged Network Adapter

867334-B21

NOTE: The DL385 Gen10 chassis ships with 4x 1 Gb embedded.

http://www.hpe.com/us/en/product-catalog/servers/server-adapters.hits-12.html.

HPE InfiniBand

HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter

825110-B21

HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter

825111-B21

HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter

872725-B21

HPE 100Gb 1-port OP101 QSFP28 x16 PCIe Gen3 with Intel® Omni-Path Architecture Adapter

829335-B21

HPE I/O Expansion Options

NOTE: The Primary Riser shipping default in the chassis is a x8 FH, FL, x16 FH, FL and x8 FH, HL.

HPE DL38X Gen10 x16/x16 Riser Kit

826694-B21

NOTE: Slot 1 or 2 in Primary or Secondary location.

NOTE:

HPE DL Gen10 x8/x16/x8 Riser Kit

870548-B21

NOTE: No M.2 support on this riser.

NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each adapter. NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic

environments must be purchased separately. Please see the related NIC QuickSpecs for Technical Specifications and additional information:

NOTE: Only one FlexibleLOM can be added to the server. These options are upgradeable and can be changed from the original configuration after the server is shipped. NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately. Please see the related NIC QuickSpecs for Technical Specifications and additional information:

NOTE: For a Secondary/Tertiary riser the second processor is required.

NOTE: Supports Full Height and Full length cards.

Bus width x16, x16, Connector Width x16, x16.

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Core Options

Page 33

NOTE: Supports Full Height, Half- length cards; Full Height, Full-length cards and Full Height, Half- length

NOTE: Bus width x8, x16, x8, Connector Width x8, x16, x8.

HPE DL38X Gen10 4-port Slim SAS Riser Kit

867807-B21

NOTE: Riser supporting up to 8 NVMe drives in Primary location.

NOTE: This can be connected to an 8SFF NVMe drive cage in box 3.

To achieve max 24 NVMe support, connect 8 NVMe drives to both the primary and secondary risers,

4 NVMe drives to the tertiary riser, and 4 NVMe drives the the on board connectors.

HPE DL Gen10 x16/x16 GPU Riser Kit

826704-B21

NOTE: Primary or Secondary Riser, Connector in slot 2 & 3 for GPU support.

NOTE: Bus width x16, x16, Connector Width x16, x16.

HPE DL38X Gen10 2SFF HDD SAS/SATA Riser Kit

826688-B21

NOTE: Premium bay supporting SFF SAS/SATA .

NOTE: Will leave 1 x16 Connector available in bottom slot.

HPE DL38X Gen10 x8/x8/x8 1-port 2 NVMe SlimSAS Riser

867806-B21

NOTE: Supports NVMe drives in Primary or Secondary location.

HPE DL38X Gen10 2-port 4 NVMe SlimSAS Riser

867808-B21

NOTE: Supports up to 4 NVMe drives in Tertiary location.

HPE DL38X Gen10 4-port 8 NVMe Secondary Slim SAS Riser

873732-B21

NOTE: Riser supporting up to 8 NVMe drives in Secondary location.

HPE DL38X Gen10 2 x8 PCIe Tertiary Riser Kit

875780-B21

NOTE: Supports 2x 8 slots in the Tertiary location.

HPE DL38X Gen10 x16 Tertiary Riser Kit

826700-B21

NOTE: Supports 1x 16 slot in the Tertiary location.

NOTE: Bus width x16 Connector Width x16.

HPE Power Supplies

HPE 500W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

865408-B21

NOTE: Flex Slot Platinum power supplies support power efficiency of up to 94% and include a standard C-14 power inlet connector.

HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit

865438-B21

NOTE: Flex Slot Titanium power supplies support power efficiency of up to 96% and include a standard C-14 power inlet connector.

HPE 800W Flex Slot Universal Hot Plug Low Halogen Power Supply Kit

865428-B21

NOTE: Flex Slot universal power supplies support power efficiency of up to 94% and support both 277VAC/380VDC power inputs.

HPE 800W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

865414-B21

NOTE: Flex Slot Platinum power supplies support power efficiency of up to 94% and include a standard C-14 power inlet connector.

HPE 800W Flex Slot -48VDC Hot Plug Low Halogen Power Supply Kit

865434-B21

NOTE: Flex Slot -48VDC power supplies support power efficiency of up to 94%.

HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit

830272-B21

NOTE: Flex Slot Platinum Plus power supplies support power efficiency of up to 94% and include a C-14

located at: http://www.hpe.com/info/hppoweradvisor.

cards.

NOTE:

NOTE: Supports Full Height and Full length cards.

NOTE: Available in Primary or Secondary Riser location.

NOTE: Supports Full Height and half-length cards. NOTE: Bus width x8, x8, x8 Connector Width x8, x8, x8.

NOTE: Supports Full Height and full-length card.

power inlet connector that can support HPE Power Discovery Services (blue connector). NOTE: Prior to making a power supply selection it is highly recommended that the HPE Power Advisor is run to determine the right size power supply for your server configuration. The HPE Power Advisor is

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Core Options

Page 34

NOTE: All power supplies in a server should match. Mixing Power Supplies is not supported.

HPE Cooling Options

HPE DL38X Gen10 High Performance Temperature Fan Kit

867810-B21

NOTE: This kit is required for specific Ambient temperature environments, coming in 2H2017.

NOTE:

http://www.hpe.com/servers/ashrae

NOTE: Option kits contain the specified power supply and a PDU IEC cable. NOTE: 1600W power supplies only support high line voltage. NOTE: HPE ProLiant servers ship with an IEC-IEC power cord used for rack mounting with Power

Distribution Units (PDUs). Visit HPE power cords f

NOTE: High Performance fan kit consists of 6 fans, these will need to replace all the standard fans in the unit, and fill all 6 fan cages.

NOTE: The 12 LFF and 24 SFF models (including field upgrades to 24 SFF) will already include 6 High

Performance fan kits. NOTE: The High Performance fan kit is needed to support certain Passive GPGPU (Graphics cards) configurations; or ASHRAE operating environments.

For elevated ambient temperature support please see:

or a full list of optional HPE power cords.

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Additional Options

Page 35

NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard

information.

Embedded Management

HPE iLO Advanced

HPE iLO Advanced Electronic License with 1yr Support on iLO Licensed Features

E6U59ABE

HPE iLO Advanced 1-server License with 1yr Support on iLO Licensed Features

512485-B21

HPE iLO Advanced Flexible Quantity License with 1yr Support on iLO Licensed Features

512486-B21

HPE iLO Advanced AKA Tracking License with 1yr Support on iLO Licensed Features

512487-B21

HPE iLO Advanced Electronic License with 3yr Support on iLO Licensed Features

E6U64ABE

HPE iLO Advanced 1-server License with 3yr Support on iLO Licensed Features

BD505A

HPE iLO Advanced Flexible Quantity License with 3yr Support on iLO Licensed Features

BD506A

HPE iLO Advanced AKA Tracking License with 3yr Support on iLO Licensed Features

BD507A

HPE iLO Advanced Security

HPE iLO Advanced Premium Security Upgrade Electronic License with 3yr Support on Licensed Features

Q7E12AAE

HPE iLO Advanced Premium Security Edition License with 1yr Support on Licensed Features

Q7E31A

HPE iLO Advanced Premium Security Flex Qty License with 1yr Support on Licensed Features

Q7E32A

HPE iLO Advanced Premium Security Edition Electronic License with 1yr Support on Licensed Features

Q7E32AAE

HPE iLO Advanced Premium Security AKA Tracking License with 1yr Support on Licensed Features

Q7E35A

HPE iLO Advanced Premium Security Upgrade Electronic License with 3yr Support on Licensed Features

Q7E12AAE

HPE iLO Advanced Premium Security Edition License with 3yr Support on Licensed Features

Q7E33A

HPE iLO Advanced Premium Security Flex Qty License with 3yr Support on Licensed Features

Q7E34A

HPE iLO Advanced Premium Security Edition Electronic License with 3yr Support on Licensed Features

Q7E34AAE

HPE iLO Advanced Premium Security AKA Tracking License with 3yr Support on Licensed Features

Q7E36A

HPE Converged Infrastructure Management Software

HPE OneView Physical Media Kit LTU

E5Y37A

HPE OneView Standard 1yr 9x5 Support Flexible Quantity E-RTU

K6F98AAE

HPE OneView including 3yr 24x7 Support Physical 1-server LTU

E5Y34A

HPE OneView including 3yr 24x7 Support Track 1-server LTU

E5Y36A

HPE OneView including 3yr 24x7 Support Flexible Quantity E-LTU

E5Y35AAE

HPE OneView Upgrade from Insight Management 3yr 24x7 Support 1-server LTU

F6Q91A

HPE OneView w/o iLO including 3yr 24x7 Support 1-server LTU

P8B24A

HPE OneView w/o iLO including 3yr 24x7 Support Track 1-server LTU

P8B25A

HPE OneView w/o iLO Advance including 3yr 24x7 Support Track 1-server LTU

E5Y40A

HPE OneView for ProLiant DL Server including 3yr 24x7 Support Bundle Track 1-server LTU

E5Y44A

HPE OneView Upgrade from Insight Management including 3yr 24x7 Support Flexible Quantity E-LTU

E5Y45AAE

HPE OneView w/o iLO including 3yr 24x7 Support Flexible Quantity E-LTU

P8B26AAE

NOTE: Licenses ship without media. The HPE OneView Media Kit can be ordered separately, or can be downloaded.

HPE PCIe Workload Accelerator Options

HPE 4TB PCIe x4 Lanes Read Intensive HHHL 3yr Wty Digitally Signed Firmware Card

877831-B21

Enterprise recommends the use of an HPE approved configurator. Contact your local sales representative for additional

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Additional Options

Page 36

HPE SMB Solution Software USB Media Kit

HPE SMB Software Installer Gen1 USB Media Kit

Q9W01A

HPE Security

HPE Gen10 2U Bezel Kit

867809-B21

HPE Bezel Lock Kit

875519-B21

HPE Gen10 Chassis Intrusion Detection Kit

867824-B21

NOTE: This provides a physical connection from the chassis board and hood and detects any physical

distribution, and operation.

HPE Trusted Platform Module 2.0 Gen10 Option

864279-B21

NOTE: HPE Trusted Platform Module 2.0 option works with Gen10 servers with UEFI Mode not Legacy

NOTE:

HPE Smart Array Controllers

Performance RAID Controllers

which supports multiple devices and is sold separately.

HPE Smart Array P816i-a SR Gen10 (16 Internal Lanes/4GB Cache/SmartCache) 12G SAS Modular Controller

804338-B21

NOTE: Does not occupy a PCIe expansion slot and includes SmartCache license.

HPE Smart Array P408i-a SR Gen10 (8 Internal Lanes/2GB Cache) 12G SAS Modular Controller

804331-B21

NOTE: Does not occupy a PCIe expansion slot.

HPE Smart Array P408i-p SR Gen10 (8 Internal Lanes/2GB Cache) 12G SAS PCIe Plug-in Controller

830824-B21

HPE Smart Array P408e-p SR Gen10 (8 External Lanes/4GB Cache) 12G SAS PCIe Plug-in Controller

804405-B21

Essential RAID Controllers

HPE Smart Array E208i-a SR Gen10 (8 Internal Lanes/No Cache) 12G SAS Modular Controller

804326-B21

NOTE: Does not occupy a PCIe expansion slot.

HPE Smart Array E208i-p SR Gen10 (8 Internal Lanes/No Cache) 12G SAS PCIe Plug-in Controller

804394-B21

HPE Smart Array E208e-p SR Gen10 (8 External Lanes/No Cache) 12G SAS PCIe Plug-in Controller

804398-B21

HPE Cable Options

HPE DL380 Gen9 12LFF Smart HBA H240 SAS Cable Kit

786215-B21

HPE DL385 Gen10 Mini SAS 3POS Cable Kit

882100-B21

intrusion into the chassis, providing security during the entire supply chain process of shipping, receiving,

Mode. It is not compatible with HPE ProLiant Gen8 servers or earlier generation variants. NOTE: HPE server systems can have a TPM module (of any type) installed only once. It cannot be replaced with any other TPM module.

There is a FIO setting to allow this TPM module to operate in a TPM 1.2 mode (872108-B21).

The Gen10 controller naming framework has been updated to simplify identification as depicted below. For a more detailed breakout of the available Gen10 Smart Array controllers visit the HPE Smart Array Gen10 Controllers Data Sheet

NOTE: All performance RAID controllers are supported by the HPE Smart Storage Battery (P01366-B21),

NOTE: The P816i-a cable ships in the 12LFF chassis only.

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Additional Options

Page 37

Optional Software

HPE Smart Array SR Secure Encryption (Data at Rest Encryption/per Server Entitlement) E-LTU

Q2F26AAE

HPE Smart Array SR SmartCache (Single Key/Single Server) LTU

D7S26A

HPE Smart Array SR SmartCache (Single Key/Multiple Servers) LTU

D7S27A

HPE Smart Array SR SmartCache (Single Key/Multiple Servers) E-LTU

D7S27AAE

NOTE: SmartCache is offered on HPE Smart Array performance RAID controllers and comes standard (no licensing is required) if the HPE Smart Array P816i-a SR Gen10 Controller is installed in the server.

Optional Upgrades

HPE 96W Smart Storage Battery (up to 20 Devices) with 145mm Cable Kit

P01366-B21

NOTE: Provides backup power for multiple HPE Smart Array controllers or other devices. Is required with performance RAID controllers.

HPE Tape Backup

NOTE: For the complete range of tape drives, autoloaders, libraries and media

products http://www.hpe.com/storage/BURAcompatibility.

HPE Disk-Based Backup

HPE RDX+ 1TB External Backup System

B7B69B

HPE RDX+ External Docking System

C8S07B

HPE RDX 2TB USB3.0 External Disk Backup System

E7X53B

HPE Storage Options

Emulex Fibre Channel HBAs

HPE StoreFabric SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

Q0L13A

HPE StoreFabric SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

Q0L14A

HPE StoreFabric SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

Q0L11A

HPE StoreFabric SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

Q0L12A

QLogic Fibre Channel HBAs

HPE StoreFabric SN1100Q 16Gb Single Port Fibre Channel Host Bus Adapter

P9D93A

HPE StoreFabric SN1100Q 16Gb Dual Port Fibre Channel Host Bus Adapter

P9D94A

HPE StoreFabric SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

P9M75A

HPE StoreFabric SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

P9M76A

Converged Network Adapters

HPE StoreFabric CN1100R Dual Port Converged Network Adapter

QW990A

HPE StoreFabric CN1100R 10GBASE-T Dual Port Converged Network Adapter

N3U52A

HPE StoreFabric CN1200E 10Gb Converged Network Adapter

E7Y06A

HPE StoreFabric CN1200E 10GBASE-T Dual Port Converged Network Adapter

N3U51A

NOTE: For the complete listing of Fibre Channel Host Bus Adapters for Windows 2000, Windows Server 2003 and Linux, please see: https://www.hpe.com/us/en/product-catalog/storage/storage-adapters.hits-12.html.

see: https://www.hpe.com/us/en/storage/storeever-tape-storage.html. For hardware and software compatibility of Hewlett Packard Enterprise tape backup

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Additional Options

Page 38

HPE Racks

NOTE: Please see the HPE Advanced Series Racks QuickSpecs for information on additional racks options

and rack specifications.

NOTE: Please see the HPE Enterprise Series Racks QuickSpecs for information on additional racks options and rack specifications.

NOTE: Please see the HPE Standard Series Racks QuickSpecs for information on additional racks options and rack specifications.

HPE Power Distribution Units (PDUs)

NOTE: Please see the HPE Basic Power Distribution Units (PDU) QuickSpecs for information on these

products and their specifications.

NOTE: Please see the HPE Metered Power Distribution Units (PDU) QuickSpecs for information on these products and their specifications.

NOTE: Please see the HPE Intelligent Power Distribution Unit (PDU) QuickSpecs for information on these products and their specifications.

NOTE: Please see the HPE Metered and Switched Power Distribution Units (PDU) QuickSpecs for information on these products and their specifications.

HPE Uninterruptible Power Systems (UPS)

NOTE: To learn more, please visit the HPE Uninterruptible Power Systems (UPS) web page.

NOTE: Please see the HPE DirectFlow Three Phase Uninterruptible Power System QuickSpecs for

information on these products and their specifications.

NOTE: Please see the HPE Line Interactive Single Phase UPS QuickSpecs for information on these products and their specifications.

HPE Rack Options

NOTE: Please see the HPE KVM Switches web page for information on these products and their

specifications.

Rail Kits

NOTE: Ball bearing and Easy Install rail kits contain telescoping rails which allow for in-rack serviceability.

Hewlett Packard Enterprise recommends that a minimum of two people are required for all Rack

use for any installation.

HPE 2U Small Form Factor Easy Install Rail Kit

733660-B21

NOTE: Does not include CMA (733664-B21).

HPE 2U Large Form Factor Easy Install Rail Kit

733662-B21

NOTE: Does not include CMA (733664-B21).

HPE 2U Cable Management Arm for Easy Install Rail Kit

733664-B21

HPE 2U Small Form Factor Ball Bearing Rail Kit

720863-B21

NOTE: Does not include CMA (720865-B21).

HPE 2U Large Form Factor Ball Bearing Rail Kit

720864-B21

NOTE: Does not include CMA (720865-B21).

HPE 2U Cable Management Arm for Ball Bearing Rail Kit

720865-B21

NOTE: To assist in the installation of the server into the rack an optional installation tool is available by contacting your local services representative (695539-001).

CAUTION:

Server installations. Please refer to your installation instructions for proper tools and number of people to

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Additional Options

Page 39

HPE Other Options

HPE Rack LED Light Kit

BW939A

HPE Kit LCD 1.83m Latch Display Port Cable

G7T29A

HPE USB and SD Options

HPE Enterprise Mainstream Flash Media Kits for Memory Cards

HPE 32GB microSD Flash Memory Card

700139-B21

HPE 8GB microSD Flash Memory Card

726116-B21

HPE 8GB microSD Flash USB Drive

737953-B21

HPE Support Services

Installation & Startup Services

HPE Install ProLiant DL38x(p) Service

U4554E

HPE Installation and Startup DL38x(p) Service

U4555E

Proactive Care

HPE 3 Year Proactive Care 24x7 DL38x Gen10 Service

H8QQ0E

HPE 3 Year Proactive Care 24x7 with DMR DL38x Gen10 Service

H8QQ1E

HPE 3 Year Proactive Care 24x7 with CDMR DL38x Gen10 Service

H8QQ2E

HPE 3 Year Proactive Care Call-To-Repair DL38x Gen10 Service

H8QQ9E

HPE 3 Year Proactive Care Call-To-Repair 24x7 with DMR DL38x Gen10 Service

H8QR0E

HPE 3 Year Proactive Care Call-To-Repair with CDMR DL38x Gen10 Service

H8QR1E

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Memory

Page 40

DIMM Type

HPE SKU P/N

SKU Description

HPE 32GB

Voltage

1.2V

2666 MT/s

1 DIMM Per Channel

2666 MT/s

2400 MT/s

2133 MT/s

NOTE: The maximum memory speed is a function of the memory type, memory configuration, and processor model.

838079-B21 838081-B21 838089-B21 838083-B21

HPE 8GB (1x8GB)

Single Rank x8 DDR4-

2666 CAS-19-19-19

Registered Smart

Memory Kit

HPE 16GB (1x16GB)

Single Rank x4 DDR4-

2666 CAS-19-19-19

Registered Smart

Memory Kit

HPE 16GB (1x16GB)

Dual Rank x8 DDR4-

2666 CAS-19-19-19

Registered Smart

Memory Kit

(1x32GB) Dual

Rank x4 DDR4-

2666 CAS-19-19-

19 Registered

Smart Memory Kit

DIMM Rank -> Single Rank (1R) Single Rank (1R) Dual Rank (2R) Dual Rank (2R) DIMM Capacity -> 8GB 16GB 16GB 32GB

DRAM depth [bit] 1G 2G 1G 2G DRAM Width [bit] x8 x4 x8 x4 DRAM Density 8Gb 8Gb 8Gb 8Gb CAS Latency 19-19-19 19-19-19 19-19-19 19-19-19 DIMM Native Speed (MT/s) 2666 MT/s

AMD EPYC® 7000 Processors Officially Supported Memory Speed (MT/s)

2 DIMM Per Channel

NOTE: Model 7251 1 DIMM per channel is 2400 MT/s.

For details on the HPE Server Memory speed, visit: http://www.hpe.com/docs/amd-speed-tables

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Memory

Page 41

DIMM Type

HPE SKU P/N

SKU Description

HPE 64GB (1x64GB) Quad Rank x4

HPE 128GB (1x128GB) Octal Rank

DIMM Rank ->

Quad Rank (4R)

Octal Rank (8R)

DRAM depth [bit]

2666 MT/s

2 DIMM Per Channel

2133 MT/s

NOTE: The maximum memory speed is a function of the memory type, memory configuration, and processor model.

For details on the HPE Server Memory speed, visit: http://www.hpe.com/docs/amd-speed-tables

DDR4 memory options part number decoder

NOTE: Capacity references are rounded to the common gigabyte (GB) values.

• 64GB = 65,536 MB

For more information on memory, please see the Memory Quickspecs: HPE DDR4 SmartMemory

Load Reduced (LRDIMM)

838085-B21 838087-B21

DDR4-2666 CAS-19-19-19 Load

Reduced Smart Memory Kit

x4 DDR4-2666 CAS-22-19-19 3DS

Load Reduced Smart Memory Kit

DIMM Capacity -> 64GB 128GB Voltage 1.2V 1.2V

DRAM Width [bit] x4 x4 DRAM Density 8Gb 8Gb CAS Latency 19-19-19 22-19-19 DIMM Native Speed (MT/s) 2666 2666

AMD EPYC® 7000 Processors Officially Supported Memory Speed (MT/s)

1 DIMM Per Channel

NOTE: Model 7251 1 DIMM per channel is 2400 MT/s.

• 8GB = 8,192 MB

• 16GB = 16,384 MB

• 32GB = 32,768 MB

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Storage

Page 42

8LFF chassis with Universal media bay and optional 2SFF and optical drive shown

12 LFF + 3 rear LFF drives

12 LFF + 2 rear SFF drives

6 rear SFF drives

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Storage

Page 43

24 SFF + rear 2 SFF drives

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Technical Specifications

Page 44

System Unit

Dimensions

8.73 x 44.55 x 67.94 cm

3.44 x 17.54 x 26.75 in

SFF Drives:

8.73 x 44.55 x 73.02 cm

3.44 x 17.54 x 28.75 in

LFF Drives:

Weight (approximate)

14.9 kg

32.75 lb

Minimum: 8 SFF chassis with 1x SFF HDD and 7 HDD blanks, 2x Drive Bay blanks, 1x (plus blank), 1x Smart Array, 1x Riser installed, cables for the above)

23.6 kg

51.5 lb

Maximum: 12 LFF hard drives (no rear drives), 2x processors, 2x power supplies, 1x Smart Array, 2x Risers installed)

Input Requirements

Rated Line Voltage

100 to 120 VAC

200 to 240 VAC

BTU Rating

Maximum

For 800W Power Supply: 3207 BTU/hr (at 100 VAC), 3071 BTU/hr (at 200 VAC), 3112 BTU/hr (at 240 VAC) for China Only

For 500W Power Supply: 1979 BTU/hr (at 100 VAC), 1911 BTU/hr (at 200 VAC), 1965 BTU/hr (at 240 VAC) for China Only

Power Supply Output

Rated Steady-State Power

For 1400W Power Supply: 1400W (at 240 VAC), 1400W (at 240 VAC)

For 800W Power Supply: 800W (at 100 VAC), 800W (at 240 VAC), 800W (at 240 VAC) input for China only

For 500W Power Supply: 500W (at 100 VAC), 500W (at 240 VAC), 500W (at 240 VAC) input for China only

Maximum Peak Power

For 1400W Power Supply: 1400W (at 200 to 240 1VAC), 1400W (at 240 VAC) input for China only

For 800W Power Supply: 800W (at 100 to 127 VAC), 800W (at 200 to 240 1VAC), 800W (at 240 VAC) input for China only

For 500W Power Supply: 500W (at 100 to 127 VAC), 500W (at 200 to 240 VAC), 500W (at 240 VAC) input for China only

System Inlet Temperature

Standard Operating Temperature

10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct Maximum rate of change is 20°C/hr (36°F/hr). The upper limit and rate of change may be limited by the type and number of options installed.

System performance during standard operating support may be reduced if operating with a fan fault or above 30°C (86°F).

Extended Ambient Operating Temperature

For approved hardware configurations, the supported system inlet range is extended to be: 5° to 10°C (41° to 50°F) and 35° to 40°C (95° to 104°F) at sea level with an altitude derating of m (1.8°F per every 574 ft) above 900 m (2953 ft) to a maximum of 3050 m (10,000 ft). The approved hardware configurations for this system are listed at the URL:

http://www.hpe.com/server

For approved hardware configurations, the supported system inlet range is extended to be: 40° to 45°C (104° to 113°F) at sea level with an altitude derating of 1.0°C per every 125 m (1.8°F per every 410 ft) above 900 m (2953 ft) to a maximum of 3 approved hardware configurations for this system are listed at the URL:

http://www.hpe.com/servers/ashrae

(per power supply)

processor including standard heatsink, 1x power supply

sustained sunlight.

1.0°C per every 175

s/ashrae

050 m (10,000 ft). The

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Technical

Specifications

Page 45

Non-operating

-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).

Relative Humidity

Operating

8% to 90% - Relative humidity (Rh), 28°C maximum wet bulb temperature, non-condensing.

(non-condensing)

Non-operating

5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing..

Altitude

Operating

3050 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable m/min (1500 ft/min).

Non-operating

9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min).

Acoustic Noise

Listed are the declared A-Weighted sound power levels (L

) and declared average bystander position A environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109). The listed soun shipping configurations. Additional options may result in increased sound levels. Please have your HPE representative provide information from the HPE EMESC website for further technical details regarding the configurations listed below.

Idle

LWAd

4.8 B Entry

4.4 B Base

4.6 B Perf

LpAm

37 dBA Entry

31 dBA Base

31 dBA Perf

Operating

LWAd

4.8 B Entry

4.4 B Base

4.6 B Perf

LpAm

37 dBA Entry

31 dBA Base

31 dBA Perf

NOTE: Acoustics levels presented here are generated by the test configuration only. Acoustics levels will vary depending on system configuration. Values are subject to change without notification and are for reference only.

NOTE:

may result in increased sound levels.

Emissions Classification

To view the regulatory information for your product, view the Safety and Compliance Information for Serve Enterprise Support Center:

http://www.hpe.com/support/Safety-Compliance-EnterpriseProducts

System performance may be reduced if operating in the extended ambient operating range or with a fan fault.

altitude change rate is 457

WAd

-Weighted sound pressure levels (L

) when the product is operating in a 23°C ambient

pAm

d levels apply to standard

NOTE: Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements.

The Listed sound levels apply to standard shipping configurations. Additional options

(EMC) – Regulatory Information

r, Storage, Power, Networking, and Rack Products, available at the Hewlett Packard

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Technical

Specifications

Page 46

QuickSpecs.

For information on the HPE Smart Array P408i-a SR Gen10 Controller please refer to their QuickSpecs.

For information on the HPE Smart Array P408i-p SR Gen10 Controller please refer to their QuickSpecs.

For information on the HPE Smart Array P408e-p SR Gen10 Controller please refer to their QuickSpecs.

For information on the HPE Smart Array P816i-a SR Gen10 Controller please refer to their QuickSpecs.

Environment-friendly

Hewlett Packard Enterprise offers end-of-life product return, trade-in, and recycling programs, in many geographic areas, for our products. Products returned to Hewlett Packard Enterprise will be

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for

customers who integrate and re-sell Hewlett Packard Enterprise equipment.

For information on the HPE Smart Array E208i-a SR Gen10 Controller please refer to their

For information on the HPE Smart Array E208i-p SR Gen10 Controller please refer to their

For information on the HPE Smart Array E208e-p SR Gen10 Controller please refer to their

Products and Approach End-of-life Management and Recycling

recycled, recovered or disposed of in a responsible manner.

each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard Enterprise web site. These instructions may be used by recyclers and other WEEE treatment facilities as well as Hewlett Packard Enterprise OEM

QuickSpecs

HPE ProLiant DL385 Gen10 Server

Summary of Changes

Page 47

Date

Version History

Action

Description of Change

07-May-2018

Version 4

Added

Added new Entry model to the Pre-Configured models section.

Changed

Service and Support section was updated. Pre Models, Core Options, and Additional Options were revised.

02-Apr-2018

Version 3

Changed

SKU descripton were updated.

12-Feb-2018

Version 2

Added

New model was added to the Pre-configured Models section.

Changed

Overview, Expansion Slots, Maximum Internal Storage, Pre-configured Models, Configuration Information Additional Options, and Memory were revised.

Removed

Obsolete SKUs were removed from the QuickSpecs.

04-Dec-2017

Version 1

New

New QuickSpecs.

© Copyright 2018 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such pr be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.

AMD® and EPYC® are registered trademarks of A countries.

Microsoft®, Windows®, and Windows Server® are U.S. registered trademarks of the Microsoft group of companies.

For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less

a00026913enus – 16108 – North America – V4 - 7-May-2018

-Configured models, Configuration Information – Factory Integrated

- Factory Integrated Models, Core Options,

oducts and services. Nothing herein should

dvanced Micro Devices Corporation in the U.S. and other

HPE P09708-B21 Getting Started Guide

Specifications and Main Features

Frequently Asked Questions

User Manual

Overview

Standard Features

Optional Features

Service and Support

Additional Options

Memory

Storage

Technical Specifications

Summary of Changes

a00026913enus – 16108 – North America – V4 - 7-May-2018