QuickSpecs
HPE Intelligent Power Distribution Unit (PDU)
Overview
1
HPE Intelligent Power Distribution Unit (PDU)
You cannot control what you cannot monitor. The new HPE Intelligent Power Distribution Unit (PDU) brings state of the art
management and control to rack mounted PDU
restrict growth in your data center.
Using core and stick architecture
t the core, load segment, stick,
and outlet level with unmatched precision and accuracy. Remote management is built in and even provides power cycle ability of
individual outlet
is also the first to incorporate Power Discovery Services,
which when combined with
line of Platinum or Platinum Plus high efficiency power supplies,
communicates with the attached servers to collect asset information for the automatic mapping of the power topology inside a rack,
speeding implementation time and greatly reducing the risk of human errors that can cause power outages.
Intelligent PDU 6 Outlet Core Unit
1-6.
Load segment circuit breakers, one per IEC C19
9.
Network connection (RJ-45)
7.
LED Display Connection (DB-9)
10.
Reset button (recessed)
8.
For future use (DB-9)
11-16.
IEC C19 Load segment outlets
s to prevent over provisioning of power which may
, the HPE Intelligent PDU provides monitoring of power consumption a
s on the Intelligent Extension Bars. Hewlett Packard Enterprise
the Hewlett Packard Enterprise
Page
QuickSpecs
HPE Intelligent Power Distribution Unit (PDU)
Overview
2
Intelligent PDU 12 Outlet Core Unit
1-12.
Load segment circuit breakers, one per IEC C19
26.
Network connection (RJ-45)
13-24
IEC C19 Load segment outlets
27. LED Display Connection (DB-9)
25. Reset button (recessed)
Intelligent PDU rear mount LED Display
1.
Multi segment LED for amperage display
7.
Scroll button for PDU Core Unit selection
2. Multi segment LED for PDU Core Unit identification
8. DB-9 for firmware updates
3. Multi segment LED for Load segment /Extension Bar
identification number
9. DB-9 for connection to PDU Core Unit
4. Multi segment LED for outlet identification number (Intelligent
Extension bars only)
10. Recessed reset button
Page
QuickSpecs
HPE Intelligent Power Distribution Unit (PDU)
Overview
3
5. Scroll button for outlet selection (intelligent Extension bars
only)
11. Alarm indicator
6.
Scroll button for load segment/extension bar selection
12.
Power Indicator
Intelligent Extension Bar G2 for PDU
1.
Outlet UID indicator (blue LED)
5.
Reset button
2.
Outlet Status indicator (red/green LED)
6.
Extension Bar UID indicator (blue LED)
3. 5x Individually monitored and switchable IEC C13 outlets with
PLC connectors
7. Power on indicator for Intelligent Extension Bar (green
LED)
4. Outlet number ID window (changes based on orientation)
Page
QuickSpecs
HPE Intelligent Power Distribution Unit (PDU)
Overview
4
Standard Extension Bar for PDU
1.
5 x IEC C13 outlets
3.
Extension Bar UID indicator (blue LED)
2. Extension Bar power indicator (green LED)
4. Inlet cord with IEC C19 PLC connector to attach to
PDU Core Unit
Page
QuickSpecs
HPE Intelligent Power Distribution Unit (PDU)
Models
5
HPE Recommended
HPE recommended options have best performance, value and availability.
and availability, Recommended Options have been
management and security experience, Recommended Options
View the list for your region
HPE Extended Options
Extended Options provide an extended catalog of products tailored for customers in specific markets or
with specific workloads, requiring the utmost in performance or value. Fully integrated into the HPE
management and security experience, Extended Options represent great value and performance but
Want recommended options with the best fit and timely availability? See a list of HPE Recommended
Options here.
PDU Core Units
NOTE: Each PDU Core has 6 or 12 IEC C19 outlets and includes the LED display unit.
NOTE: 6 outlet PDU cores can be mounted in 1U or 0U locations. 12 outlets PDU cores require 2U of rack space.
Single Phase, Modular (1U)
HPE Intelligent Modular 4.9kVA/L6-30P 24A/208V Outlets (6) C19/Horizontal NA/JP PDU (Recommended)
AF520A
HPE Intelligent Modular 7.3kVA/60309 3-wire 32A/230V Outlets (6) C19/Horizontal INTL PDU
(Recommended)
AF525A
Three Phase, Modular (2U)
HPE Intelligent Modular 3Ph 17.3kVA/IEC 60309 60A 4-wire 48A/208V (12) C19/Horizontal NA/JP PDU
(Recommended)
AF535A
PDU Kits with Standard Extension Bars
NOTE: PDU Kits include one Core Unit, LED Display, and 4 Standard (non-intelligent) Extension Bars. Total outlets would be 20
IEC C13 and 2 IEC C19 per kit. Additional Standard or Intelligent Extension bars can be added for a maximum of 30 IEC C13
outlets.
Single Phase, Modular (1U)
HPE Intelligent Modular 7.3kVA/60309 3-wire 32A/230V Outlets (6) C19/Horizontal INTL PDU Kit
(Recommended)
AF534A
Additional HPE Intelligent PDU models
Extended Options provide an extended catalog of products tailored for customers in specific markets or with specific workloads,
requiring the utmost in performance or value. Fully integrated into the HPE management and security experience, Extended Options
represent great value and performance but typically have a longer lead-time.
PDU Core Units
NOTE: Each PDU Core has 6 or 12 IEC C19 outlets and includes the LED display unit.
NOTE: 6 outlet PDU cores can be mounted in 1U or 0U locations. 12 outlets PDU cores require 2U of rack space.
Three Phase, Modular (1U)
HPE Intelligent Modular 3Ph 8.6kVA/L15-30P 24A/208V Outlets (6) C19/Horizontal NA/JP PDU (Extended)
AF522A
HPE Intelligent Modular 3Ph 17.3kVA/60309 60A 4-wire 48A/208V (6) C19/Horizontal NA/JP PDU
(Extended)
AF523A
Options
Offering the best combination of performance, value
selected by HPE experts to provide the right technology for a range of workloads and market
segments. Fully integrated into the HPE
provide the best fit with timely availability.
HPE Recommended Options –
typically have a longer lead-time.
Page
QuickSpecs
HPE Intelligent Power Distribution Unit (PDU)
Related Options
6
Related Options
PDU Extension Bars
HPE 5xC13 Intelligent PDU Extension Bar G2 Kit (Recommended)
AF547A
NOTE: Contains 2 Intelligent PDU Extension Bars.
NOTE: Intelligent Extensions Bars have individually monitored outlets that are also individually
switchable for power cycling attached equipment. Each individual C13 outlet has Power Line
Communications to support Intelligent Power Discovery when connected to PLC enabled common slot
power supplies.
HPE 5xC13 Outlets Power and UID LEDs Pair Standard Extension Bar
(Recommended)
AF528A
NOTE: Standard (non-intelligent) Extension Bars are monitored as a single load segment and do not
support Intelligent Power Discovery. Standard Extension Bars for HPE PDUs include a blue unit ID LED
(UID) which helps associate the load segment being monitored with the Extension bar.
Power cables with power
line communications
(PLC)
HPE 2.0m 250V 16A C19-C20 WW Single IPD Enabled Jumper Cord (Extended)
TK738A
NOTE: PLC power cables are designated by bright blue IEC connectors.
NOTE:
C14 PLC power cables enable Power Discovery Services communications between HPE
Common Slot Platinum or Platinum Plus Power Supplies and the HPE Intelligent Extension Bars when
used with the HPE Intelligent PDU cores.
NOTE:
able Power Discovery Services communications between HPE
BladeSystem c7000 Platinum Enclosure and HPE Intelligent PDU cores.
C13-
C19-C20 PLC power cables en
Page
QuickSpecs
HPE Intelligent Power Distribution Unit (PDU)
Standard
Features
7
Key Features
• Unique modular design architecture
Platinum Enclosures.
Unique Modular Design
Architecture
The Hewlett Packard Enterprise Intelligent PDUs have a patented modular architecture that improves
their flexibility. This "Building block" concept consists of two main parts, the
Core Unit, and the
Extension Bar(s). The
nd
mounting hardware. The 6 outlet Core Unit is zero-U or 1U rack mountable. The 12 outlet core unit is 2u
rack mountable. Optional Extension Bars mount directly to the rack
PDU Core Units
an embedded web engine for remote monitoring and control
acks or in 1U
Core units are available in a variety of single phase or three phase inputs to match any application.
Each core unit has individually monitored IEC C19 outlets that are individually protected by high
Intelligent PDU incorporates out of band power line communications
(PLC) technology to communicate with either the Standard Extension Bars or the Intelligent
n be mounted directly to the
LED Monitoring Display
Each Intelligent PDU Core Unit includes a LED Display for local monitoring of power consumption
LED Displays have an external alert indicator that is visible from the rear of the rack with doors
and can scroll through individual C19
PDU
Individual extension bars do not extend into the maintenance zone between RETMA rails at the
Intelligent PDU
Core Units.
• Up to 2 PDU cores can be connected serially to work off of the same IP address or local display
• Small form factor with flexible mounting options
• 6 and 12 IEC C19 outlet models
• IEC C19 outlets accept optional PDU Extension Bars or direct IEC C20 cable connections for
HPE BladeSystems Enclosures
• Automatic 100mS per outlet start delay on Intelligent Extension Bar
• User configurable restart delay by Intelligent Extension Bar outlet from 0-999 seconds
• Secure Web Browser user interface.
• Individual outlet control and monitoring on Intelligent Extension Bars
• Individual outlet monitoring on PDU core.
• Easy installation
• Consolidated cord management and retention
• Easily accessible outlets
• All outlets can be used with either Power Discovery Services (PDS) enabled power cables or
standard IEC jumper cables. Power Discovery Services requires PDS enabled power cables and
Common Slot Platinum or Platinum Plus Power Supplies with PLC connectors on ProLiant DL
servers or BLc Single Phase Intelligent Power Module equipped HPE BladeSystem c7000
HPE Intelligent PDUs ship with one Core Unit, the mountable LED display a
• Each PDU Core Unit incorporates
and includes the LED display unit for local monitoring of current at the rack.
• Core units can be mounted in zero U configurations in HPE Advanced Series R
configurations in any industry standard rack.
•
•
-frame or the rack extension unit.
quality commercial grade breakers.
• Each IEC C19 on the HPE
Extension bars.
• The PDU extension bars can be plugged into the Core Unit, and ca
rack frame, spanning the entire length of the rack.
•
at the rack.
• LED Displays are mountable on the inside rear door of the rack.
•
closed.
• LED Displays show power draw (amperage) at the PDU
outlet (load segments), and individual C13 outlets on the Intelligent Extension Bars.
Standard Extension Bars
• All PDU Extension bars are sold in pairs.
• Each Extension bar has five IEC C13 outlets for connection to external equipment.
• Extension Bars can be mounted in the rear of the rack to ease cable management.
•
rear of the rack.
• Extension Bars have power indicators and UID LEDs
• Extension bars have bright blue PLC IEC C20 input connectors for use with HPE
PDU
Page
QuickSpecs
HPE Intelligent Power Distribution Unit (PDU)
Standard Features
8
Intelligent PDU Extension Bars G2
Each Intelligent Extension Bar is 5U in height and has 5 individually monitored and switchable
Each IEC C13 outlet has a status indicator and UID LED that is activated when scrolling through
to
Standard IEC C14 jumper cables can be used with the Intelligent Extension bars for powering
emote power cycling or remote
Each IEC C13 outlet on the Intelligent Extension Bar has an automatic 100mS per outlet start
p to 999 seconds on a per outlet basis.
The Intelligent Extension Bar G2 has an automatic outlet numbering systems that maintains
consistent outlet identification so that Outlet Number 1 will always be the top of the Extension
The inlet cable on the Intelligent Extension Bar G2 has been moved to the back of the bar to ease
Standard PDU Extension Bars (non
Standard Extension bars are monitored as a single load segment of 5 x C13 outlets at the IEC
n Bars have a power indicator and UID LED that is activated when scrolling
Power line communications (Power Discovery Services (PDS) enabled) power cables
incorporates RS232 serial connections to enable Power Discovery
Power Discovery Services uses out of band power line communications to transfer server identity
t
either PDS
enabled power cables or standard IEC jumper cables. Power Discovery Services requires PDS
enabled power cables and Common Slot Platinum or Platinum Plus Power Supplies with PLC
HPE
-
ent arms are
used a combination of 4.5ft and 6ft cables should be used to reach Intelligent Extension Bars
mounted on alternate sides of a rack up to 1 meter deep. A combination of 6ft and 8ft or 8ft and
10ft cables should be used for deeper racks.
•
IEC C13 outlets.
•
the local display unit or remotely via the embedded web engine.
• Each IEC C13 on the Intelligent Extension Bar incorporates bright blue PLC connections
communicate with HPE Common Slot Platinum Power Supplies with PLC.
•
non-IPD enabled devices.
• Each IEC C13 outlet on the Intelligent Extension Bar is capable of r
lock out to prevent unauthorized equipment from being installed in the rack.
•
delay and can be user programmed for restart delays of u
•
Bar independent of which side of the rack the Intelligent Extension Bar G2 is mounted on.
•
installation and improve cable routing to the PDU Core.
-intelligent)
• Standard Extension Bars can be mounted side by side for high density or redundant applications.
•
C19 outlet on the Intelligent PDU Core Unit.
• Standard Extensio
through the local display unit or remotely via the embedded web engine.
• Each PDS enabled power cable
Services.
•
information between the HPE Common Slot Platinum Power Supplies and the HPE Intelligen
PDU's Intelligent Extension Bars and automatically maps the server to outlets on the PDU.
• PDS enabled cables and connectors conform to standard IEC specifications and sizes.
• When combined with HPE ProLiant rack mount servers all outlets can be used with
connectors on ProLiant DL servers or BLc Single Phase Intelligent Power Module equipped
BladeSystem enclosures such as the c7000 Platinum Enclosures.
• Available in a wide range of lengths for C13-C14 jumper cables for ProLiant servers and C19
C20 jumper cables for BladeSystems c7000 Platinum Enclosures. If cable managem
Page
QuickSpecs
HPE Intelligent Power Distribution Unit (PDU)
Standard Features
9
Accuracy, Precision, and
Reporting
• Voltage accuracy within:
core, load segment, or individual Intelligent
Remote reporting of Voltage, Amperage, Wattage, VA, and Power Factor down to 0.01
measured by load segment and by individual Intelligent Extension Bar
outlet
Power Discovery
Services
• Power Discovery Services automatically senses new equipment as it is plugged into the PDU to
and Systems Insight
Manager with minimal manual configuration reducing human errors that can cause unplanned
latinum Plus Common Slot Power
Intelligent Extension Bar using PDS Enabled power cables the
automatically records the server name, server type, iLO IP address, and the Unique Universal
will detect non PDS enabled and third party equipment when they
are plugged in and highlight the outlets on the management screens. Asset and identification
ed and third party equipment must be manually entered into the
will detect and track changes in the power plug locations based on the
Control eliminating human errors in
Unused Intelligent Extension Bar C13 outlets can be disabled globally with a button click to
prevent unplanned devices from using empty outlets and protect breakers.
Redundancy and
Grouping
• Two PDUs can be paired to 2 other PDUs in the same rack for redundancy.
,
All based on UUID
s can recognize redundant Platinum Common Slot Power Supplies in ProLiant servers
cores
Redundant Platinum Common Slot Power Supplies in ProLiant servers are automatically paired
to ease management and reduce
s or grouped on a
S and cannot be grouped on
If redundant Platinum Common Slot Power Supplies in ProLiant servers are not
s a redundancy failure warning will be
issued by flashing the outlet UID LEDs on the Intelligent Extension Bars and via SNMP
and email alerts.
• Current accuracy within:
• Wattage accuracy within 1 watt at > 20mA
• Precision
• Reporting
− 1% at 200-240 volt input
− 1% >1A
− 3% 400mA-1A
− 5% 100mA-400mA
− 10% <100mA
− 0.5 Second data collection for Voltage, Amperage, Wattage, VA, and Power Factor.
− 2 digit local display for amperage by PDU
Extension Bar outlet
−
amp, 0.1volt
map power connections and changes, insure redundancy, and configure PDU
outages.
• Automatic discovery -When ProLiant servers with Platinum or P
Supplies are connected to an PDU
PDU
Identification (UUID) number and maps the server to the connected outlets.
• Assisted discovery - The PDU
information for non PDS enabl
PDU Management Screens.
• Once stored the PDU
UUID information.
• This information can be automatically forwarded to Insight
configuration and speeding implementation.
•
• HPE Intelligent Extension Bars connected to PDU Cores enable outlet grouping on a single PDU
outlet pairing on redundant PDUs, and power redundancy verification.
information obtained automatically.
• Paired PDU
and ensure they are plugged into different PDU Intelligent Extension bars on different PDU
for true power redundancy.
•
across multiple grouped PDUs or grouped on a single PDU
potential errors during configuration.
− Up 8 outlets can be paired together across multiple grouped PDU
single PDU.
− If PDUs are paired outlets must be paired across both PDU
a single PDU.
−
connected correctly across multiple grouped PDU
Page
QuickSpecs
HPE Intelligent Power Distribution Unit (PDU)
Standard Features
10
− Paired outlets on grouped PDUs can be power cycled simultaneously from either PDU
can be power cycled simultaneously via a single control
button in the remote management interface. Automatically discovered servers and
assisted discovery devices benefit from all the redundancy management features
Security
• SSL 3.0/TLS 1.0 (168 bit TLS-RSA-with-3DES-EDE-CBC-SHA data encryption). X.509 certificate
• Certificate Authority (CA) or self-signed certificates can be uploaded
SNMP and email alerts
• The PDU provides detailed SNMP and email alerts showing alert origination by PDU , load
• The PDU allows SNMP queries for data collection.
Configuration Options
Depending on the level of monitoring and control needed there are 3 basic configurations for the HPE
PDU
the C19 level
: provides highly accurate power monitoring and remote
switching of each individual C13 outlet on the Intelligent Extension Bars. This configuration also
Power Discovery Services when combined with the Common Slot Platinum or Platinum
Plus Power Supplies.
PDS C13 Jumper Cable
Guidelines
Rack Depth
Recommended C13-C14 cable length
Left rear
Right rear
One meter or shorter with
cable management arms
4.5ft (1.37m)
6ft (1.83m)
One meter or shorter without
cable management arms
2.5ft (0.76m)
2.5ft (0.76m)
Deeper than one meter with
cable management arms
6ft (1.83m)
8ft (2.43m)
Deeper than one meter
without cable management
arms
4.5ft (1.37m)
2.5ft (0.76m)
NOTE: Recommended lengths are from server power supplies on the right rear of servers to
Intelligent Extension Bars mount at the same U height.
Easy Installation
Installation is quick and easy. Whether you choose to mount the Intelligent PDU core in zero-U or 1U, all
required mounting brackets, accessories, and installation instructions are shipped with the product. The
Extension Bars come with easy to use, snap
10000
G2, Advanced Series, and Enterprise Series Racks.
Compatibility
Ideal for use with the 10000 G2, Advanced Series, and Enterprise Series Racks, the Intelligent PDUs are
largely designed for the dense rack environment. These Intelligent PDUs connect directly to the facility
input power.
Warranty
Standard three year warranty with first year including parts and labor. HPE UPSs are backed by a standard
three year limited warranty; 3 year parts, 1 year Labor, 1 year onsite.
via a single control button in the remote management interface.
− Grouped outlets on a single PDU
segment, and outlet as well as alert description, value, and trigger.
.
• Core Only: provide highly accurate power monitoring of each C19 outlet.
• Core and Standard Extension bars: Provides highly accurate power monitoring at
as a load segment of five C13 outlets each.
• Core and Intelligent Extension Bars
enables
-in brackets, which fit directly into the rack frame of HPE
Page
QuickSpecs
HPE Intelligent Power Distribution Unit (PDU)
Service and Support
11
Service and Support
Protect your business beyond warranty with HPE support services
When you buy
Options, it's also a good time to think about what level of service
you may need.
services provide total care and support expertise with
committed response choices designed to meet your IT and business need.
Recommended Services
3-Year HPE 24x7 4 hour Response, Hardware Support Onsite Service
Provides you with rapid remote support and if required a Hewlett Packard Enterprise authorized
representative who will arrive on site any time and day of the year to begin hardware maintenance service
within 4 hours of the service request being logged.
https://www.hpe.com/h20195/v2/getpdf.aspx/5982
HPE ProLiant Server Hardware Installation
Provides for the basic hardware installation of Hewlett Packard Enterprise branded servers, storage
devices and networking options to assist you in bringing your new hardware into operation in a timely and
professional manner
https://www.hpe.com/h20195/v2/getpdf.aspx/5981-9356en
3
Provides an IT manager with a team of support specialists who will quickly begin troubleshooting the
system to help return the hardware to operating condition within 6 hours of the initial service request to
the HPE Global Solution Center
HPE Proactive Select Service
Provides a flexible way to purchase Hewlett Packard Enterprise best
class consultancy and technical
services. You can buy Proactive Select Service Credits when you purchase your hardware and then use the
credits over the next 12 months.
Insight Remote Support
Delivers secure remote monitoring and support for Hewlett Packard Enterprise servers and storage, 24x7
at no additional cost. Available as part of HPE Warranty, Foundation Care and Service Contract offers.
Parts and materials
Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to
maintain the covered hardware product in operating condition, including parts and materials for available
and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum usage
limitations as set
specs, or the technical
product data sheet will not be provided, repaired, or replaced as part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by Hewlett Packard Enterprise due to malfunction.
Coverage
For ProLiant servers and storage systems, this service covers Hewlett Packard Enterprise-branded
hardware options qualified for the server, purchased at the same time or afterward, internal to the
enclosure, as well as external monitors up to 22" and tower UPS products; these items will be covered at
the same service level and for the same coverage period as the server unless the maximum supported
lifetime and/or the maximum usage limitation has been exceeded. Coverage of the UPS battery is not
included; standard warranty terms and conditions apply.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by
due to malfunction. It does not apply to any exchange of Disk or
SSD/Flash Drives that have not failed. SSD/Flash Drives that are specified by Hewlett Packard Enterprise
as consumable parts and/or that have exceeded maximum supported lifetime and/or the maximum usage
limit as set forth in the manufacturer's operating manual or the technical data sheet are not eligible for the
defective media retention service feature option.
Hewlett Packard Enterprise
Hewlett Packard Enterprise support
-6547eee
.
-Year HPE 6 hour Hardware Support Onsite Call-to-Repair Service
https://www.hpe.com/h20195/v2/getpdf.aspx/5982-6547en
-in-
https://www.hpe.com/h20195/v2/getpdf.aspx/4aa2-3842enn
forth in the manufacturer's operating manual, product quick-
Hewlett Packard Enterprise
Page
QuickSpecs
HPE Intelligent Power Distribution Unit (PDU)
Technical Specifications
12
Intelligent PDU (6) Outlet Core Units
4.9 kVA PDU Core
8.6 kVA PDU Core
17.3 kVA PDU Core
7.3 kVA PDU Core
11 kVA PDU Core
Part Number
AF520A
AF522A
AF523A
AF525A
AF526A
Input
Connection
(Single Input)
3.6m input cord
3.6m input cord
3.6m input cord with
60A
Waterproof
3.6m input cord with
IEC 60309-32A Splash
3.6m input cord with
16A, Splash proof
Facility power
connection
NEMA L6-30R
NEMA
IEC 460C9W, 460R9W,
IEC 332C6S, 332R6S,
IEC 516C6S, 516R6S,
3 Phase Wye
Output
Connections
PDU core
6 IEC 320 C-19
6 IEC 320 C-19
6 IEC 320 C-19
6 IEC 320 C-19
6 IEC 320 C-19
Extension Bars
Optional on all Core Only Models, maximum 3 pair per PDU Core
Current (max)
24A
41.52A
83.04A
32A
16A/Phase
AC Voltage
Range
200-208V
200-208V
200-208V
200-240V
380-415V
Frequency
(Hertz)
60Hz
60Hz 60Hz
50Hz
50Hz
Load Capacity
(VA)
4992 (@208V)
8600 (@208V)
17272 (@208V)
7360 (@230V)
11000 (@400v)
Output Circuit
Breakers
6 X 20A
6 X 20A
6 X 20A
6 X 16A
6 X 16A
Overload
Protection
Yes, per individual IEC C19 outlet on Core Unit
Intelligent PDU (12) Outlet Core Units
17.3 kVA 208V PDU Core
Part Number
AF535A
Input Connection (Single Input)
3.6m input cord with IEC-60309 3 pole, 4 wire 200-240VAC 60A Waterproof
Facility power connection
IEC 460C9W, 460R9W, or equivalent
200-208VAC 60A 3 Phase Delta
Output Connections on PDU core
12 IEC 320 C-19
Extension Bars
Optional on all Core Only Models, maximum 6 pair per PDU Core
Current (max)
83.04A
AC Voltage Range
200-208V
3 Phase Delta
Frequency (Hertz)
60Hz
Load Capacity (VA)
17292 (@208V)
Output Circuit Breakers
12 X 20A
Overload Protection
Yes, per individual IEC C19 outlet on Core Unit
Intelligent PDU Kits (includes 4 Standard Extension Bars)
with L6-30P
with NEMA L15-
30P
L15-30R 200-
208V
3 phase
3 pole 4 wire Delta
IEC-60309 3 pole, 4
wire 200-240VAC
or equivalent
IEC60309
3 pole, 4 wire, 200-
208VAC 60A
3 Phase Delta
proof
or equivalent
IEC60309
2 pole, 3 wire, 200-
240VAC, 32A
IEC-60309 4 pole, 5
wire, 380-415VAC,
or equivalent
IEC60309
380-415 VAC, 16A
4 pole,
5 wire,
on
3 Phase Delta
3 Phase Delta
3 Phase Wye
IEC60309 3 pole, 4 wire,
Page
QuickSpecs
HPE Intelligent Power Distribution Unit (PDU)
Technical Specifications
13
7.3 kVA PDU Kit
Part Number
AF534A
Input Connection (Single Input)
3.6m input cord with IEC 60309-32A Splash proof
Facility power connection
IEC 332C6S, 332R6S, or equivalent IEC60309 2 pole, 3 wire, 200- 240VAC, 32A
Output Connections on PDU core
6 IEC 320 C-19
Extension Bars
4 Standard Extension Bars w/ 5x C13 each
Total outlets
20 x IEC C13, 2x IEC C19
Current (max)
32A
AC Voltage Range
220-240V
Frequency (Hertz)
50Hz
Load Capacity (VA)
7360 (@230V)
Output Circuit Breakers
6 X 16A
Overload Protection
Yes, per individual IEC C19 outlet
HPE Power Cables
Cable
Description
Part Number
IEC C-13
4.5 ft (1.37 m), x1
HPE C13 - C14 WW 250V 10Amp 1.4m Jumper Cord
(Recommended)
142257-006
1.6 ft (0.5m) x1
HPE C13 - C14 WW 250V 10Amp 0.7m Jumper Cord
(Recommended)
142257-B28
8 ft (2.5m) x1
HPE C13 - C14 WW 250V 10Amp 2.5m Jumper Cord
(Recommended)
142257-002
NOTE: Standard power cables and jumpers do not support Power Line Communications or Power
Discovery Services.
IEC C-19
8 ft (2.5m) x 1
HPE C19 - C20 WW 250V 16Amp 2.5m Jumper Cord
(Extended)
295633-B22
NOTE: Standard power cables and jumpers do not support Power Line Communications or Power
Discovery Services.
Disclaimer: Hewlett Packard Enterprise makes no recommendations regarding power connectors. The model numbers listed in the
above tables are strictly for the purpose of providing examples. Please consult a licensed professional to determine the best
connector or receptacle for your specific needs.
Page
QuickSpecs
HPE Intelligent Power Distribution Unit (PDU)
Technical Specifications
14
5
400 –
Model Selection Matrix
Voltage
100-125V
Single
Phase
200-240V
Single
Phase
Amps # Wires
Plug Name
20 A 3 NEMA L5-20P
30 A 3 NEMA L5-30P
20 A 3 IEC C20
20 A 3 NEMA L6-20P
30 A 3 NEMA L6-30P
32 A 3 IEC 309 32A, 2Pole, 3Wire
20 A
NEMA L21-20P
Sample Plug Image
(color may vary by manufacturer)
16 A 5 IEC 309 16 A, 3Pole, 5Wire
30 A 5 NEMA L21-30P
208V
Three
Phase
50 A 4 CS8365C
60 A 4 IEC 309 60A, 3Pole, 4Wire
415V
Three
32 A 5 IEC 309 32 A, 3Pole, 5Wire
Phase
Page
QuickSpecs
HPE Intelligent Power Distribution Unit (PDU)
Technical Specifications
15
Shipping Weight
6 outlet: 20.2 lb (9.16 kg), 12 outlet: 36.4 lb (16.51 kg)
Operating Temperature
50° to 122° F (10° to 50° C)
Operating Relative Humidity (%)
10% to 90%
Operating Elevation
0 to 10,000 ft (0 to 3048 m)
Storage Temperature
-4° to 140° F (-20° to 60° C)
Storage Relative Humidity (%)
5% to 95%
Storage Elevation
0 to 30,000 ft (0 to 9144 m)
Input Plug Length
142 inches (360.7 cm)
Conformance Standards
UL, CUL, CE, NOM, D - 16A and 40A models
CE, D - 32A model
Mechanical Dimensions (WxHxD), 6 outlet cores
17.5 x 1.62 x 7.5 in (44.45 x 4.11 x 19.22 cm)
Unit Weight, 6 outlet cores
20 lb (9.07 kg)
Shipping Dimensions (WxHxD), 6 outlet cores
21.5 x 12.25 x 15.0 in (54.61 x 31.12 x 38.1 cm)
Shipping Weight, 6 outlet cores
22.2 lb (10.07 kg)
Mechanical Dimensions (WxHxD), 12 outlet cores
17.5 x 3.28 x 7.5 in (44.45 x 8.4 x 19.22 cm)
Unit Weight, 12 outlet cores
32 lb (14.52 kg)
Shipping Dimensions (WxHxD), 12 outlet cores
21.5 x 12.9 x 18.2 in (54.61 x 32.76 x 46.3 cm)
Shipping Weight, Outlet cores
36.4 lb (16.51 kg)
Kit Contents
PDU Core Unit, Rear mount LED Display, mounting brackets, Serial cables
All PDU Core Units
All models ship with:
Install Card
PDU Kit Contents
AF531A, AF532A, and AF534A
Include Core Unit, LED Display, and 4 Standard Extension Bars plus all
mounting hardware.
Environment-friendly
Products and Approach End
and Recycling
Hewlett Packard Enterprise offers end-of-life product return, trade-in, and recycling programs, in many
geographic areas, for our products. Products returned to Hewlett Packard Enterprise will be recycled,
recovered or disposed of in a responsible manner.
The EU WEEE Directive (2012/19/EU) requires manufacturers to provide treatment information for each
product type for use by treatment facilities. This information (product disassembly instructions) is posted
on the
These instructions may be used by recyclers and other
WEEE treatment facilities as well as Hewlett Packard Enterprise OEM customers who integrate and re-sell
Hewlett
.
UL, CUL, NOM - 24A High and Low voltage models
-of-life Management
0U/1U Mounting brackets/hardware for Control Unit
Cord Retention bracket for the Control Unit
Tie wraps
Hewlett Packard Enterprise web site.
Packard Enterprise equipment
Page
QuickSpecs
HPE Intelligent Power Distribution Unit (PDU)
Summary of Changes
16
Date
Version History
Action
Description of Change
02-Jul-2018
Version 14
Changed
SKU description were updated
05-Mar-2018
Version 13
Changed
Models, Service and Support, Model Selection Matrix, Technical
Obsolete SKUs deleted: D9Y24A, D9Y25A
23-Oct-2017
Version 12
Changed
Care Pack naming and Service and Support- Parts and Materials updated.
16-Feb-2016
Version 11
Changed
Overview, Models, Product Highlights, Service and Support, Model
Selection Matrix, and Technical Specifications were updated.
17-Feb-2015
Version 10
Added
Added note to HPE 5xC13 Intelligent PDU Extension Bar G2 Kit
clarifying the SKU contains 2 Intelligent PDU Extension Bars.
07-Mar-2014
Version 9
Changed
Updates were made throughout,
09-Dec-2013
Version 8
Changed
Updated What's New to: New 8 foot Power Line Communications Power
Information.
06-Mar-2012
Version 7
Changed
Updates were made throughout, except in Service and Support.
30-Aug-2011
Version 6
Changed
Power Supplies and HPE Pointnext operational services were completely
01-Jul-2011
Version 5
Changed
Service and Support section revised.
20-Jun-2011
Version 4
Changed
Model and Related Option product descriptions were revised
Key Features and Warranty were moved into Product Highlights
12-Jul-2010
Version 3
Changed
Changed descriptions and part numbers in the Common Slot Platinum
Power Supplies with PLC connectors section.
21-Jun-2010
Version 2
Changed
Changed were done through the QuickSpecs.
21-Jun-2010
Version 1
New
New QuickSpecs
Sign up for updates
© Copyright 2018 Hewlett Packard Enterprise Development Company, L.P. The information contained
herein is subject to change without notice.
The only warranties for Hewlett Packard Enterprise products and services are set forth in the express
warranty statements accompanying such products and services. Nothing herein should be construed as
constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for
errors or omissions contained herein
c04123329 - 13650 - Worldwide - V14 - 02-Jul-2018
Specifications sections were updated.
Cable for use in deeper racks.
Changes made in the Models, throughout Related Options and Family
revised
Extension Bars was revised throughout the Model Selection Matrix
What's New was added to the Overview
Intelligent Extension Bar G2 for PDU was added throughout
11.4kVA PDU Core, 415V, 16A Three Phase NEMA L22-20 input,
17.3kVA PDU Core, 415V, 24A Three Phase NEMA L22-30 input and
17.3kVA PDU Core, 415V, 24A Three Phase IEC 530P6S input were
added to Models
Configuration Options was added to Product Highlights
Intelligent PDU core only units, 425 Volt chart was added to Intelligent
PDU Family Information
.
technical or editorial
Page
Loading...