HPE 833105-B21 Product Data Sheet

QuickSpecs

HPE ProLiant m710x Server Cartridge

Overview

HPE ProLiant m710x Server Cartridge

HPE ProLiant m710x Server Cartridge is designed to enhance the performance of Rich Application Streaming, Remote Workstation/Desktop Delivery and Intel® Iris ProTM P580 graphics, up to 64GB of ECC protected memory, dual 1 M.2 SSD storage modules, and up to

The HPE Moonshot System uses an innovative new architecture that results from one simple design tenet: to align purpose modules with the right workload to provide optimal results for your environment. Traditiona including management, networking, storage, power cords and cooling fans in a single chassis. In contrast, the Moonshot system shares these chassis components and is capable of supporting 45 server cartridges per 4.3U generate greater revenue from a smaller footprint while driving down your operational costs.

HPE Edgeline is the industry’s first “Converged class systems and device management built to thrive in hardened environments and handle shock, vibration and extreme temperatures. HPE Edgeline Systems allow deployment 1 to 4 HPE ProLiant m710x servers, along with associated storage and I/O options to locations both inside and outside the traditional datacenter (e.g. factories, branch office and retail outlet).

Front View:

Rear View:

Battery

2242 M.2 SSD (SATA)

Intel® Xeon® E3 Processor and Heat Sink

Four (4) DDR4 SODIMMs

Two (2) 2280 or 22110 M.2 SSDs (NVMe)

Standard USB Connector

Micro USB Connector

Server Cartridge Health LED

Mini-DisplayPort Connector

Server Cartridge UID LED/Button

Server Cartridge Power LED/Button

Video Transcoding. It has one Intel® Xeon® E3-1585L v5 four-core processor with integrated

0Gb Ethernet along with up to Four (4) 1TB NVMe

One (1) 240GB M.2 SSD for local OS booting.

-built

l servers rely on dedicated components,

chassis. This gives you the ability to

Edge System” - converging compute, storage, data capture, control and enterprise-

Page

QuickSpecs

HPE ProLiant m710x Server Cartridge

Standard Features

Processor

Intel® Xeon®

SoC

Turbo

Cores

L3 Cache

Power

DDR4 MHz

E3-1585L v5

3.0GHz

3.7GHz

4-core

8MB

45W

2133

NOTE: For more information regarding Intel® Xeon® E3, please see the following

Chipset

Intel® C236 Chipset

Graphics

P580 Graphics (3D) with 128MB of embedded DRAM (L4 cache) -and- iLO remote

onsole (2D)

On System Management

HPE iLO (Firmware HPE iLO4 2.4 or later) 4GB NAND

http://www.hpe.com/info/ilo

Memory

Type

HPE SmartMemory

Supported DIMMs

DDR4-2133

DIMM Slots Available

(4 DIMM slots per processor, 2

DIMMs per channel)

Maximum Capacity (RDIMM)

64GB

(4 x 16GB SODIMM)

NOTES:

• Registered DIMMs (RDIMMs), Load Reduced DIMMs (LRDIMMs) and Non-Volatile DIMMs (NVDIMMs) are not supported

Chipset

E3 Model

Frequency

URL: http://www.intel.com/content/www/us/en/processors/xeon/xeon-processor-e3-family.html

NOTE: For more information regarding chipset, please see the following URL: http://ark.intel.com/products/90594/Intel-GL82C236-PCH

Expansion I/O slots for selected 3D graphics cards are available in the HPE Edgeline

NOTE: 1GB USB user space configurable via UEFI and accessible via iLO is available only on HPE Edgeline System. Read and learn more in the iLO QuickSpecs:

DDR4 ECC Unbuffered Small Outline (SODIMM)

8GB (2R x 8), 16GB (2R x 8)

channels per processor, 2

• Rules under “Memory” section must be followed for Configuring and Mixing of DIMMs.

Page

QuickSpecs

HPE ProLiant m710x Server Cartridge

Standard Features

Memory Protection

Advanced ECC

Advanced ECC uses single device data correction to detect and correct single and all multibit error that occurs within a single DRAM chip.

Patrol/Demand scrubbing

Patrol and Demand scrubbing detect and correct memory errors by

accessed during normal operation.

Expansion slots

Expansion I/O slot options are available in the HPE Edgeline System. Refer to the chassis documentation for details.

Network Controller

Mellanox Connect-X3 Pro Dual 10GbE NIC. Supports RDMA over Converged Ethernet (RoCE)

Storage Controller and

SATA and PCIe controllers are Integrated in the Intel® Xeon® E3 SoC and Intel® C236 Chipset

SSD Slot #

Technology

Bus Width

Connector

Form Factor

Supported

SATA #1

SATA-3

M.2 2242

64GB

NVMe #1

PCIe 3.0

M.2 2280 or

256GB

1024GB

NVMe #2

PCIe 3.0

M.2 2280 or

256GB

NVMe #3

PCIe 3.0

M.2 2280 or

256GB

NVMe #4

PCIe 3.0

M.2 2280 or

256GB

NOTE: The HPE m710x server cartridge may be purchased with zero M.2 storage (i.e. network/diskless boot).

NOTE: SATA and NVMe M.2 SSDs can both be used as an OS boot drive

Maximum Internal

M.2 2242 SATA solid state device

240 GB

1 x 240 GB

M.2 2280 NVMe solid state devices

4 TB

4 x 1 TB

Power Supply

Power supply options depend on the chassis used. Refer to the chassis documentation for details.

System Fans

System fan options depend on the chassis used. Refer to the chassis documentation for details.

Interfaces

Server Cartridge Link LED/button Server Cartridge UID LED/button Drive LED Server Cartridge Health LED Micro

NOTE:

A adapter (from the orderable m710x cable kit) to the cartridge Micro connect the USB device to the adapter.

Mini

NOTE:

•

• Mini Displayport (DP) to HDMI Adapter

Devices

periodically inspecting the entire memory space or when the data is

Width

Sizes

120GB 240GB

Storage

-USB 2.0 connector

To connect a standard USB device to the server cartridge, connect a Micro-USB to USB Type-

-DisplayPort connector

To connect a monitor, use one of the following adapters from the orderable m710x cable kit:

Mini Displayport (DP) to Displayport (DP) Female Adapter

22110

512GB

1024GB

22110

512GB

1024GB

22110

512GB

1024GB

-USB connector, and then

Page

QuickSpecs

HPE ProLiant m710x Server Cartridge

Standard Features

Operating Systems and

Microsoft Windows Client Microsoft Windows Server RedHat Enterprise Linux SUSE Linux Enterprise S Citrix XenServer VMware ESXi

NOTE: NOTE:

Servers for OS and Virtualization Software and latest listing of software drivers available for your server, please visit our OS Support Site at: download page Center: http://www.hpe.com/support/hpesc

Industry Standard

PXE Support PCIe 3.0 Compliant WOL Support Microsoft® Logo certifications USB 2.0 and 3.0 Support ACPI 2.0 Compliant

HPE Server

Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better manageability and more secured configuration than the legacy ROM while interacting with your server at boot time. The HPE ProLiant

NOTE:

of legacy BIOS. For more information, please visit

UEFI enables numerous new capabilities specific to HPE ProLiant servers such as:

only used in HPE Edgeline

NOTE:

properly to support UEFI.

Form Factor

HPE ProLiant m710x Server Cartridge plugs into the HPE Moonshot 1500 and HPE Edgeline EL1000/EL4000 Systems.

Embedded Management

HPE Integrated Lights (HPE iLO)

Monitor your servers for ongoing management, service alerting,

UEFI

Configure and boot your servers securely with industry standard

RESTful API

RESTful API for iLO 4 is Redfish 1.0 conformance for simplified server

HPE Edgeline System

Virtualization Software Support for ProLiant Servers

Compliance

UEFI ROM

(RHEL)

erver (SLES)

Only 64-bit versions of these operating systems are supported For more information on the Hewlett Packard Enterprise Certified and Supported ProLiant

http://www.hpe.com/info/ossupport and our driver

which can be found from the HPE Support

m710x Server defaults to UEFI and does not support Legacy BIOS Boot Mode.

The UEFI System Utilities function is analogous to the HPE ROM-Based Setup Utility (RBSU)

http://www.hpe.com/servers/uefi

• Secure Boot

• Operating system specific functionality

• Support for > 2.2 TB (using GPT) boot drives

• USB 3.0 Stack (only used in HPE Edgeline System)

• Embedded UEFI Shell

• Mass Configuration Deployment Tool using RESTful API for iLO 4

• PXE boot support for IPv6 networks

• Boot support for option cards that only support a UEFI option ROM (

System)

• Network Stack configurations

For UEFI Boot Mode, boot environment and OS image installations should be configured

-Out

reporting and remote management with HPE iLO. Learn more at

http://www.hpe.com/info/ilo

Unified Extensible Firmware Interface (UEFI). Learn more at

http://www.hpe.com/servers/uefi.

management such as configuration and maintenance tasks based on modern industry standards. Learn more at

http://www.hpe.com/info/restfulapi

NOTE: Full REST API is available when the server is installed in a

Page

QuickSpecs

HPE ProLiant m710x Server Cartridge

Standard Features

Intelligent Provisioning

Hassle free server and OS provisioning for 1 or few servers with

installed in a HPE Edgeline System

NOTE: HPE iLO provides only Remote Console and Virtual Media capabilities when the server is installed in a HPE Moonshot 1500

NOTE:

Edgeline System. Advanced Pack licenses will be required for enhanced capabilities, including Remote Console and Virtual Media.

Server Utilities

Moonshot Component Pack

The HPE Moonshot Component Pack is a comprehensive firmware

compressed file. The compressed file includes all the component files

server is installed in a HPE Moonshot 1500 System.

Edgeline Component Pack

The HPE Edgeline Component Pack, is the delivery mechanism for

server is installed in a HPE Edgeline System.

Scripting Tool Kit and Windows PowerShell

Provision 1 to many servers using your own scripts to discover and

a HPE Edgeline System.

RESTful Interface Tool

RESTful Interface tool is a scripting tool to provision using RESTful

a HPE Edgeline System.

Online

HPE Insight Online, available at no additional cost as part of your

http://www.hpe.com/info/insightonline/explore

Intelligent Provisioning. Learn more

http://www.hpe.com/servers/intelligentprovisioning

NOTE: Intelligent provisioning is only supported when the server is

System.

HPE iLO provides the full set of ProLiant features when the server is installed in a HPE

solution tested on the HPE Moonshot System and delivered as a

needed to update a Moonshot System. Users deploy the firmware updates contained in the Moonshot Component Pack via the iLO Chassis Manager CLI or HPE Moonshot-45G/180G Switch Module CLI. This can be accomplished using HPE Smart Update Manager, which is included with the files, or manually.

Access the Moonshot supporting software/driver download page via: https://www.hpe.com/us/en/servers/moonshot.html

NOTE: The Moonshot Component Pack is only supported when the

firmware updates on the HPE Edgeline System. Before using your system for the first time, verify that you have the latest drivers, firmware, and system software installed.

For more information, see the Edgeline Component Pack Update Guide on the Hewlett Packard Enterprise website: http://www.hpe.com/info/edgeline-docs

NOTE: The Edgeline Component Pack is only supported when the

deploy them with Scripting Tool Kit (STK) for Windows and Linux or Scripting Tools for Windows PowerShell. Learn more at http://www.hpe.com/servers/proliant/stk Or http://www.hpe.com/servers/powershell.

NOTE: This Feature will be available when the server is installed in

API for iLO4 to discover and deploy servers at scale. Learn more at http://www.hpe.com/info/resttool

NOTE: This Feature will be available when the server is installed in

Hewlett Packard Enterprise warranty or contractual support agreement with Hewlett Packard Enterprise, is a personalized dashboard for simplified tracking of IT operations and support information from anywhere, anytime. Learn more at

Page

QuickSpecs

HPE ProLiant m710x Server Cartridge

Standard Features

Security

•

NOTE:

HPE

NOTE:

HPE Edgeline

HPE Trusted Platform

HPE Trusted Platform Module 2.0 is embedded on the Server Cartridge, and can be enabled and disabled using the

NOTE:

used to authenticate the server platform. These artifacts can include passwords, certificates and encryption keys. Windows® BitLocker™ Drive Encryptio available in Windows Server® 2008, 2012/2012 R2. BitLocker leverages the enhanced security capabilities of a Trusted Platform Module (TPM) version 2.0. The TPM works with BitLocker to help protect user data and to while the system was offline. For more information about TPM, including a white paper, go to:

NOTE: NOTE:

losing the key coul

Warranty

This product is covered by a global limited warranty and supported by Hewlett Packard Enterprise Services and a worldwide network of Hardware diagnostic support and repair is available for three years from date of purchase. Support for initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available thr

NOTE:

business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) replacement but may involve added complexity. Customers may choose to have Enterprise Hewlett Packard Enterprise regarding worldwide limited warranty and technical support is available at: http://h20564.www2.hpe.com/hpsc/wc/public/home

Serial interface control

• Administrator's password

• Power-on password

• TPM2.0

• UEFI

• iLO 4 (Integrated Lights-Out 4) has 12 customizable user accounts and SSL encryption

[2]

• iLO 4 can be disabled via a Global Setting

• iLO Advanced supports directory services integration

[3]

[1], [2] and [3] are delivered by iLO Chassis Manager in HPE Moonshot 1500 System and

m710x’s embedded iLO4 in the HPE Edgeline System.

[1], [2] and [3] require an HPE iLO Advanced License when the HPE m710x is installed in a

System.

[1]

Module

BIOS.

The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts

n (BitLocker) is a data protection feature

ensure that a server running Windows Server has not been tampered with

https://www.hpe.com/h20195/v2/gethtml.aspx?docname=c04939549

ProLiant OS pre-installed units will come with the partition required for TPM deployment. The TPM key is unique to every TPM deployed server and must be retained. Misplacing or

d result in data loss.

Hewlett Packard Enterprise Authorized Channel Partners resellers.

ough HPE support services or customized service agreements.

Server Warranty includes 3-Year Parts, 0-Year Labor, 0-Year Onsite support with next

parts. These parts fall into two categories: 1) Optional CSR parts are designed for easy

Hewlett Packard

replace Optional CSR parts at no charge. 2) No CSR parts are also designed for requiring a

authorized service provider replace the part. Additional information

Page

+ 13 hidden pages