HPE 638526-B21 Getting Started Guide

QuickSpecs
HPE Virtual Connect Flex-10/10D Module for c-
Class
BladeSystem

Overview

Page 1
HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem
Simplify and make your data center change-ready. The HPE Virtual Connect Flex-10/10D Module for the c-Class BladeSystem is
educing
Class BladeSystem is an innovative, new class of integrated interconnects from
HPE.
Virtual Connect Flex-10/10D Module Front Bezel
1.
Module locator UID
3.
Link/Port activity
2. Module status indicator
4. Port Status
What's New
Virtual Connect v4.40 highlights for the Virtual Connect Flex-10/10D Module
Models
HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem
638526-B21
HPE Virtual Connect Flex-10/10D Module Enterprise Edition for BLc7000 Option
662048-B21
NOTE: Includes 2 x HPE Virtual Connect Flex-10/10D modules plus 1 x VCEM enclosure license. Customer will receive a printed license entitlement certificate and 2 Virtual Connect modules as a single deliverable. The license entitlement certificate must be redeemed online or via fax to obtain the VCEM license activation key.
the simplest, most flexible connection to your networks. The Virtual Connect Flex-10/10D Module is a new class of blade interconnect that simplifies server connections by cleanly separating the server enclosure from LAN, simplifies networks by r cables without adding switches to manage, allows you to change servers in just minutes, not days, and tailors network connections and speeds based on application needs. HPE Flex-10 technology significantly reduces infrastructure costs by increasing the number of NICs per connection without adding extra blade I/O modules, and reducing cabling uplinks to the data center network. The HPE Virtual Connect Flex-10/10D Module for c-
SR-IOV management allows assigning Virtual Functions to any Physical Functions
QuickSpecs
HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem
Supp
orted Products
Page 2
Compatibility
HPE ProLiant and
NOTE: The HPE BladeSystem c-Class Virtual Connect Firmware v4.50 supports the following hardware.
website.
ProLiant Server blades and workstation blades
HPE Integrity BL890c i6 Server series
Integrity Servers and Network options
(HPE Integrity BL8x0c i2 servers require VC FW 3.0 or higher and HPE Integrity BL8x0c i4 servers require VC FW 3.70 or higher). For the HPE Virtual Connect Manager Release Notes and Compatibility Matrix and the full listing of recommended and minimum firmware versions, see the
Hewlett Packard Enterprise
HPE ProLiant BL2x220c G5 Server Blade
HPE ProLiant BL2x220c G7 Server Blade
HPE ProLiant BL260c G5 Server Blade
HPE ProLiant BL280c G6 Server Blade
HPE ProLiant BL420c Gen8 Server Blade
HPE ProLiant BL460c Server Blade
HPE ProLiant BL460c G5 Server Blade
HPE ProLiant BL460c G6 Server Blade
HPE ProLiant BL460c G7 Server Blade
HPE ProLiant BL460c Gen8 Server Blade
HPE Proliant BL460c Gen8 Server Blade with Intel E5-2600 v2 series Processors
HPE Proliant BL460c Gen9 Server Blade
HPE ProLiant BL465c Server Blade
HPE ProLiant BL465c G5 Server Blade
HPE ProLiant BL465c G6 Server Blade
HPE ProLiant BL465c G7 Server Blade
HPE ProLiant BL465c Gen8 Server Blade
HPE ProLiant BL480c Server Blade
HPE ProLiant BL490c Server Blade
HPE ProLiant BL495c G5 Server Blade or greater
HPE ProLiant BL620c G7 Server Blade
HPE ProLiant BL660c Gen8 Server Blade
HPE ProLiant BL660c Gen9 Server Blade
HPE ProLiant BL680c G5 Server Blade or greater
HPE ProLiant BL685c Server Blade
HPE ProLiant BL685c G5 Server Blade
HPE ProLiant BL685c G6 Server Blade
HPE ProLiant BL685c G7 Server Blade
HPE ProLiant xw460c Blade Workstation
HPE ProLiant xw2x220c Blade Workstation
HPE ProLiant WS460c G6 Workstation
HPE ProLiant WS460c G8 Workstation
HPE ProLiant WS460c G9 Workstation
Integrity Server Blades
HPE Integrity BL860c i2 Server series
HPE Integrity BL860c i4 Server series
HPE Integrity BL870c i2 Server series
HPE Integrity BL870c i4 Server series
HPE Integrity BL890c i2 Server series
HPE Integrity BL890c i4 Server series
HPE Integrity BL860c i6 Server series
HPE Integrity BL870c i6 Server series
QuickSpecs
HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem
Supported Products
Page 3
NOTE: BL860c and BL870c are not supported effective VC 4.30
Virtual Connect
Virtual Connect Firmware v4.40 is recommended with the following release sets for HPE ProLiant and HPE
HPE ProLiant server blades:
Virtual Connect Modules
HPE Virtual Connect FlexFabric 10Gb/24-port Module
HPE Virtual Connect 4 Gb Fibre Channel Module
HPE Virtual Connect 8Gb 24-Port Fibre Channel Module
HPE Virtual Connect 16Gb 24-Port Fibre Channel Module
Integrated Network Interfaces and mezzanine cards
NOTE: For optimal operation of HPE Virtual Connect Manager, use the following recommended firmware version for the Onboard Administrator and iLO.
NOTE: For Integrity i4 server blades, recommended Onboard Administrator version is 3.60 or higher. NOTE: For IPv6 management, Onboard Administrator version 4.00 or higher is required. NOTE: Some of the servers and/or options listed above may be discontinued.
HPE Virtual Connect 8Gb 20-Port Fibre Channel Module
HPE NC325m PCI Express Quad Port 1Gb server adapter
HPE NC326i Integrated Dual Port PCI Express Gigabit Server Adapter
HPE NC326m PCI Express Dual Port Multifunction Gigabit Server Adapter
HPE NC360m Dual Port 1GbE BL-c Adapter
HPE NC364m Quad Port 1GbE BL-c Adapter
HPE NC370i Dual Port Multifunction Gigabit Network Adapter
HPE NC373i Dual Port Multifunction Gigabit Network Adapter
HPE NC373m Dual Port Multifunction Gigabit Network Adapter
HPE NC382i Integrated Dual Port PCI Express Gigabit Server Adapter
HPE NC382m Integrated Dual Port PCI Express Gigabit Server Adapter
HPE NC522m Dual Port Flex-10 10GbE Multifunction BL-c Adapter
HPE NC532i Dual Port Flex-10 10GbE Multifunction BL-c Adapter
HPE NC532m Dual Port Flex-10 10GbE Multifunction BL-c Adapter
HPE NC542m Dual Port Flex-10 10GbE BL-c Adapter
HPE NC550m 10Gb 2-port PCIe x8 Flex-10 Ethernet Adapter
HPE NC551i Dual Port FlexFabric 10Gb Converged Network Adapter
HPE NC551m Dual Port FlexFabric 10Gb Converged Network Adapter
HPE NC553i 10Gb 2-port FlexFabric Converged Network Adapter
HPE NC553m 10Gb 2-port FlexFabric Converged Network Adapter
HPE NC554m/FLB 10Gb 2 port Converged Network Adapter
HPE FlexFabric 20Gb 2-port 630FLB Adapter (Only at 10Gb downlinks)
HPE FlexFabric 20Gb 2-port 630M Adapter (Only at 10Gb downlinks)
HPE FlexFabric 20Gb 2-port 650FLB Adapter (Only at 10Gb downlinks)
HPE FlexFabric 20Gb 2-port 650M Adapter(Only at 10Gb downlinks)
HPE Flexfabric 10Gb-2 port 536FLB Adapter
HPE FlexFabric 10Gb 2-port 534FLB Adapter
HPE FlexFabric 10Gb 2-port 534M Adapter
HPE FlexFabric 10Gb 2-port 554M Adapter
HPE FlexFabric 10Gb 2-port 554FLB Adapter
HPE Flex-10 10Gb 2-port 530FLB Adapter
HPE Flex-10 10Gb 2-port 530M Adapter
HPE Flex-10 10Gb 2-port 552M Adapter
HPE Ethernet 1Gb 2-port 361FLB Adapter
HPE Ethernet 1Gb 4-port 366M Adapter
Firmware
Integrity environments:
QuickSpecs
HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem
Supported Products
Page 4
HPE Service Pack for ProLiant : Version SPP 2014.09.0 or greater
HPE Integrity Server Blades
HPE Integrity i4 Server Blades
Recommended HPE Smart Update Firmware:
HPE Integrity i2 Server Blades
HPE BladeSystem
The HPE BladeSystem c3000 and c7000 Enclosure has been designed up front with the Virtual Connect
Supported Configurations
HPE BladeSystem c7000 Enclosure - Rear View
1.
Upper Fan System
5.
Interconnect Bays 7 / 8
2.
Interconnect Bays 1 /2
6.
On Board Administrator
The HPE Service Pack for ProLiant (SPP) with HPE Smart Update Manager (HPE SUM) as the deployment engine provides a comprehensive approach to firmware and system software maintenance. The SPP is a comprehensive collection of firmware and system software components, all tested together as a single solution stack that include drivers, agents, utilities, firmware packages for HPE ProLiant servers, controllers, storage, blades and enclosures, and other options. It is available on all supported HPE ProLiant Gen 8 servers (HPE ProLiant SL/ML/DL/BL 100, 200, 300, 500, 700, 900 servers, and HPE CloudSystem Matrix) in addition to earlier generation HPE ProLiant servers. The SPP is released with most major HPE ProLiant server releases.
To access the latest HPE Service Pack for ProLiant click here:
https://www.hpe.com/us/en/product-catalog/detail/pip.service-pack-for-proLiant.5104018.html
To access latest HPE Smart Update Firmware, click here:
https://www.hpe.com/us/en/products/servers/smart-update.html
HPE Smart Update Firmware-HPE Integrity BL860c/870c/890c i4 System Firmware Bundle for Linux/Windows, 44.01
c-Class Enclosures
HPE Smart Update Firmware-HPE Integrity BL860c/870c/890c i2 System Firmware Bundle for Linux/Windows,26.36
Architecture in mind incorporating the HPE Onboard Administrator, ILO Management, and HPE Management tools inside the Virtual Connect framework.
Enclosures:
HPE BladeSystem c-Class c7000 Enclosure with Onboard Administrator
HPE BladeSystem c-Class c3000 Enclosure with Onboard Administrator
QuickSpecs
HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem
Supported Products
Page 5
3.
Interconnect Bays 3 / 4
7.
Lower Fan System
4.
Interconnect Bays 5 / 6
8.
Rear Redundant Power Complex
HPE BladeSystem c3000 Enclosure - Front View
1. Device Bays 1 thru 8
4. Insight Display
2.
Enclosure DVD Drive
5.
Active Onboard Administrator
3.
Standby Onboard Administrator (reserved for Future)
HPE BladeSystem c3000 Enclosure - Rear View
1.
Local KVM interface (reserved for future)
7.
iLO/Onboard Administrator Port
2. Interconnect Bay 1
8. iLO/Onboard Administrator Port 2 (reserved for future)
3.
Active Cool Fans
9.
Power Supplies
4.
Interconnect Bay 2
10.
Interconnect Bay 4
5. Enclosure Up-link and Service Port
11.
Interconnect Bay 3
6. Enclosure Down-link
Mezzanines
QuickSpecs
HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem
Supported Products
Page 6
c-7000 Port Mapping
Port mapping differs slightly between full height and half height server blades due to the support for additional Mezzanine cards on the full height version. Hewlett Packard Enterprise has providing intelligent management tools via the Onboard Administrator and Onboard Administrator Guide, Enclosure Setup and Installation Guide provides detailed inform mapping.
Half Height Server Blade
Full Height Server Blade
c-3000 Port Mapping
Port mapping differs slightly between full height and half height server blades due to the support for additional Mezzanine cards on the full height ve Hewlett Packard Enterprise has providing intelligent management tools via the Onboard Administrator and Onboard Administrator Guide, Enclosure mapping.
Half Height Server Blade
Full Height Server Blade
The following are supported configurations for the Virtual Connect Flex-10 Ethernet Module. Please note that other interconnect options can be installed in the enclosure, but they do not inherit the benefits of Virtual Connect. Switches and Pass will operate per their default configurations. Any moves, adds, or changes to servers which are connected to non modules will require reconfiguration on the LAN and/or SAN. The Virtual Connect Manager will only manage Virtual Connect
simplified the processes of mapping Mezzanine ports to switch ports by
HPE Insight Manager Software. The
ation on port
rsion.
simplified the processes of mapping Mezzanine ports to switch ports by
HPE Insight Manager Software. The
Setup and Installation Guide provides detailed information on port
-Thru modules
-Virtual Connect
QuickSpecs
HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem
Supported Products
Page 7
Modules.
HPE BladeSystem c7000 Enclosure
NOTE: The following tables show a number of typical, supported configurations for an HPE BladeSystem c7000 Enclosure.
[Bay 1] VC-Enet
[Bay 2] Empty
[Bay 3] Other/empty
[Bay 4] Other/empty
[Bay 5] Other/empty
[Bay 6] Other/empty
[Bay 7] Other/empty
[Bay 8] Other/empty [Bay 1] VC-Enet
[Bay 2] VC-Enet
[Bay 3] Other/empty
[Bay 4] Other/empty
[Bay 5] Other/empty
[Bay 6] Other/empty
[Bay 7] Other/empty
[Bay 8] Other/empty [Bay 1] VC-Enet
[Bay 2] VC-Enet
[Bay 3] VC-Enet
[Bay 4] VC-Enet
[Bay 5] Other/empty
[Bay 6] Other/empty
[Bay 7] Other/empty
[Bay 8] Other/empty [Bay 1] VC-Enet
[Bay 2] VC-Enet
[Bay 3] Other/empty
[Bay 4] Other/empty
[Bay 5] VC-Enet
[Bay 6] VC-Enet
[Bay 7] Empty
[Bay 8] Empty [Bay 1] VC-Enet
[Bay 2] VC-Enet
[Bay 3] VC-Enet
[Bay 4] VC-Enet
[Bay 5] VC-Enet
[Bay 6] VC-Enet
[Bay 7] Empty
[Bay 8] Empty [Bay 1] VC-Enet
[Bay 2] Empty
[Bay 3] VC-FC
[Bay 4] Empty
[Bay 5] Other/empty
[Bay 6] Other/empty
[Bay 7] Other/empty
[Bay 8] Other/empty [Bay 1] VC-Enet
[Bay 2] VC-Enet
[Bay 3] VC-FC
[Bay 4] VC-FC
[Bay 5] Other/empty
[Bay 6] Other/empty
[Bay 7] Other/empty
[Bay 8] Other/empty [Bay 1] VC-Enet
[Bay 2] VC-Enet
[Bay 3] VC-Enet
[Bay 4] VC-Enet
[Bay 5] VC-FC
[Bay 6] VC-FC
[Bay 7] Empty
[Bay 8] Empty
QuickSpecs
HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem
Supported Products
Page 8
[Bay 1] VC-Enet*
[Bay 2] VC-Enet
[Bay 3] VC-Enet
[Bay 4] VC-Enet
[Bay 5] VC-FC
[Bay 6] VC-FC
[Bay 7] VC-FC
[Bay 8] VC-FC
* This configuration is only applicable for enclosures with full-height servers.
[Bay 1] VC-Enet
[Bay 2] VC-Enet
[Bay 3] VC-FC
[Bay 4] VC-FC
[Bay 5] VC-Enet
[Bay 6] VC-Enet
[Bay 7] Empty
[Bay 8] Empty [Bay 1] VC-Enet
[Bay 2] VC-Enet
[Bay 3] VC-FC
[Bay 4] VC-FC
[Bay 5] VC-Enet
[Bay 6] VC-Enet
[Bay 7] VC-Enet
[Bay 8] VC-Enet [Bay 1] VC-Enet
[Bay 2] VC-Enet
[Bay 3] Other/empty
[Bay 4] Other/empty
[Bay 5] VC-FC
[Bay 6] VC-FC
[Bay 7] Empty
[Bay 8] Empty [Bay 1] VC-Enet
[Bay 2] VC-Enet
[Bay 3] VC-FC
[Bay 4] VC-FC
[Bay 5] VC-FC
[Bay 6] VC-FC
[Bay 7] Empty
[Bay 8] Empty [Bay 1] VC-Enet
[Bay 2] VC-Enet
[Bay 3] VC-Enet
[Bay 4] VC-Enet
[Bay 5] VC-Enet
[Bay 6] VC-Enet
[Bay 7] VC-Enet
[Bay 8] VC-Enet
HPE BladeSystem c3000 Enclosure
NOTE: The following tables show a number of typical, supported configurations for an HPE BladeSystem c3000 Enclosure.
[Bay 1] VC-Enet
[Bay 2] VC-Enet
[Bay 3] Empty
[Bay 4] Empty [Bay 1] VC-Enet
[Bay 2] Empty
[Bay 3] Empty
[Bay 4] Empty [Bay 1] VC-Enet
[Bay 2] VC-Enet
[Bay 3] VC-Enet
[Bay 4] VC-Enet [Bay 1] VC-Enet
[Bay 2] VC-Enet
[Bay 3] VC-FC
[Bay 4] VC-FC
QuickSpecs
HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem
Supported Products
Page 9
NOTE: When using VC Flex-10 Modules with Flex-10 NICs on server blades, only VC Ethernet modules may be used for Ethernet connections in the same enclosure.
Required Cabling
NOTE: For available cables; please see the "Options" section below of this QuickSpecs.
Maximum Distances
Multimode OM1
62.5/125 micron
Multimode OM2 50/125 micron
Multimode OM3 50/125 micron
Singlemode 9 micron
SR
2 - 26m/33m*
2 - 82m
2 - 300m
LR
2 -10km
LRM 0.5 - 220m
0.5 - 220m
0.5 - 220m
* 26m at 160MHz and 33m at 200MHz.
Stacking
Stacking links are used to interconnect Virtual Connect Ethernet Modules when using more than one enclosure
All Virtual Connect Modules within the VC Domain must be interconnected. Any combination of 1Gb and 10Gb
following address: HPE Virtual Connect for c-Class BladeSystem and Installation Guide
Configuration
NOTE: For additional information on 10Gb cable specifications go to:
http://www.hpe.com/rnd/pdfs/10gig_cabling_technical_brief.pdf
or when using more than two Virtual Connect Ethernet Modules in a single enclosure.
cables can be used to interconnect the Virtual Connect Modules; however the following provides recommended configurations (note that a built-in 10Gb link is provided between modules in horizontally adjacent bays). Supported cable lengths on 10Gb uplinks are 3 to 15 meters and supported 10Gb stacking links (connecting between two HPE Virtual Connect Ethernet Modules) are 0.5 to 7 meters. Interconnecting the modules allows all Ethernet NICs on all server blades in the Virtual Connect domain to have access to any Virtual Connect uplink port. By using these module-to-module links, a single pair of uplinks can be used as the data center network connections for the entire Virtual Connect domain, and allows any server blade to be connected to any Ethernet network.
NOTE: Supported module-to-module and multi-enclosure stacking configurations may be found in the HPE Virtual Connect for c-Class BladeSystem Setup and Installation Guide which can be downloaded at the
QuickSpecs
HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem
Standard Feat
Page 10
Product Features
Performance
ysical function device with customizable speeds
In tunneled VLAN mode, up to 4,096 networks are supported per network uplink and server downlink.
Once defined, LAN and SAN administrators don't have to be involved in server changes
ures
16 x 10Gb downlinks to server NICs
Each 10Gb downlink supports up to 4 FlexNICs or 3 FlexNICs and 1 iSCSI FlexHBA
Each iSCSI FlexHBA can be configured to transport Accelerated iSCSI protocol.
Each FlexNIC and iSCSI FlexHBA is recognized by the server as a PCI-e physical function device with
adjustable speeds from 100Mb to 10Gb in 100Mb increments when connected to a HPE NC553i 10Gb 2-port FlexFabric Converged Network Adapter or any Flex-10 NIC and from 1Gb to 10Gb in 100Mb increments when connected to a NC551i Dual Port FlexFabric 10Gb Converged Network Adapter or NC551m Dual Port FlexFabric 10Gb Converged Network Adapter including NC554FLB Dual Port FlexFabric Adapter
4 x 10Gb cross connects for redundancy and stacking
10 x 10Gb SR, LR, or LRM fiber and copper SFP+ uplinks
Supports up to 4 FlexNICs per 10Gb server connections.
Each FlexNIC is recognized by the server as a PCI-e ph
from 100Mb to 10Gb.
Line Rate, full-duplex 600 Gbps bridging fabric
1.0 µs latency
MTU up to 9216 Bytes - Jumbo Frames
Supports up to 128K MAC addresses and 1K IGMP groups
VLAN Tagging, Pass-Thru and Link Aggregation supported on all uplinks
In mapped VLAN mode, up to 1,000 networks are supported on network uplinks per Share Uplink Set, domain or module and on server downlinks up to 162 networks are supported per 10Gb physical port (VC v3.30 or later).
Stack multiple Virtual Connect Flex-10/10D modules with other VC Flex-10/10D, VC FlexFabric or VC
Flex-10 across up to 4 BladeSystem enclosures allowing any server Ethernet port to connect to any Ethernet uplink
Management
Virtual Connect Manager is included with every module
HTTPS and a secure, scriptable CLI interface is ready out of the box. Easy setup and management via
the Onboard Administrator interface
SNMP v.1, v.2 and v.3, provide ease of administration and maintenance.
Port Mirroring on any uplink provides network troubleshooting support with Network Analyzers
IGMP Snooping optimizes network traffic and reduces bandwidth for multicast applications such as
streaming applications
Role-based security for network and server administration with LDAP, TACACS+ and RADIUS
compatibility
Remotely update Virtual Connect firmware on multiple modules using Virtual Connect Support Utility
1.11.0 or greater
CLI auto-filling with TAB key
GUI and CLI session timeout for security
QoS configurable based on DOT1P and DSCP
Configurable filtering of multicast traffic
sFlow monitoring
Virtual Connect Server Profiles
Create up to 4 individual FlexNICs with their own dedicated, customized bandwidth per 10Gb
downlink connection.
Set FlexNIC speeds from 100Mb to 10Gb per connection
Allows setup of server connectivity prior to server installation for easy deployment
Ability to move, add, or change server network connections on the fly
QuickSpecs
HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem
Standard Features
Page 11
Stack multiple Virtual Connect Ethernet modules together in an enclosure to allow any server Ethernet
Supports all 1Gb Server NICs including LOM and Mezzanine card options and the latest 10Gb KR NICs
Options
port to connect to any uplink
The Fibre Channel Virtual Connect Module included provides a complete LAN and SAN Virtual
Connect solution
Optional HPE SFP+ SR, LR, and LRM modules and SFP+ Copper cables in 0.5m, 1m, 3m, and 7m
lengths
QuickSpecs
HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem

Service and Support, HPE Care Pack and Warranty Information

Page 12
Service and
HPE Technology Services for Industry Standard Servers and BladeSystem
and software. You can choose the type and level of service that is most suitable for your IT and business needs.
Recommended HPE Pointnext operational services for your HPE product
Optimized Care
3-Year HPE 6 hour Call to Repair Response, Proactive Care
Interconnects and Virtual Connect) and software installation and startup of a BladeSystem c7000 Infrastructure
Standard Care
3-Year HPE 24x7 4 hour response, Proactive Care Service
HPE Installation and Startup Service for HPE BladeSystem c-Class Infrastructure for c7000 enclosure
Support
Capitalizing on HPE ProLiant server and HPE BladeSystem capabilities requires a service partner who understands your increasingly complex business technology environment. That's why it makes sense to team up with the people who know Hewlett Packard Enterprise infrastructure hardware and software best - the experienced professionals at HPE Services.
Protect your business beyond warranty with HPE Pointnext operational services HPE Pointnext operational services offer complete care and support expertise with committed response choices designed to meet your IT and business needs.
HPE Foundation Care services offer scalable reactive support-packages for Hewlett Packard Enterprise servers
HPE Proactive Care delivers high levels of system availability through proactive service management and advanced technical response. HPE Datacenter Care provides highly flexible environmental support to address unique customer business needs.
Choose a recommended service appropriate to your product or contact your Hewlett Packard Enterprise sales representative or authorized HPE ServiceOne partner for additional HPE Pointnext operational services information.
Combined reactive and proactive support for hardware and software helping optimize your systems and delivering high levels of availability through proactive service management and advanced technical response. Hardware problem resolution to return the hardware in operating condition within 6 hours of the initial service request. A Technical Account Manager, as your single point of contact, will own your call or issue end to end until resolved.
https://www.hpe.com/h20195/v2/getpdf.aspx/4aa3-8855eee.pdf
HPE Installation and Startup Service for HPE BladeSystem c-Class Infrastructure for c7000 enclosure
Provides for hardware installation (c-Class ProLiant and Integrity server blades, storage blades, Ethernet
in a single enclosure including deployment of OS (two servers), HPE Insight Control and Server Deployment (formerly RDP).
https://www.hpe.com/h20195/v2/getpdf.aspx/4aa0-5964enw.pdf
HPE Installation and Startup Service for HPE BladeSystem c-Class Enhanced Network
Hewlett Packard Enterprise provides for the configuration and testing of BladeSystem Ethernet interconnect switches and Virtual Connect to facilitate proper implementation of network protocols and access to advanced features.
https://www.hpe.com/h20195/v2/getpdf.aspx/4aa0-5969enw.pdf
This service gives you combined reactive and proactive support including rapid access to our Advanced Solution Center to manage and prevent problems and a Technical Support Specialist with a broad level of technical knowledge that will engage with additional technical expertise as needed from HPE's vast global resources.
https://www.hpe.com/h20195/v2/getpdf.aspx/4aa3-8855eee.pdf
QuickSpecs
HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem
Service and Support, HPE Care Pack and Warranty Information
Page 13
Provides for hardware installation (c-Class ProLiant and Integrity server blades, storage blades, Ethernet Interconnects and Virtual Connect) and software installation and startup of a BladeSystem c7000 Infrastructure
Related Services
HPE Proactive Care Personalized Support - Environmental Option
Insight
HPE Insight Remote Support provides 24 X 7 remote monitoring, proactive notifications, and problem
HPE Support
Personalized online support portal with access to information, tools and experts to support Hewlett Packard
Parts and
Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to maintain
Warranty
Server Blade Interconnect Limited Warranty includes 1 year Parts, 1 year Labor, 1-year on-site support. Additional information regarding worldwide limited warranty and technical support is available at:
in a single enclosure including deployment of OS (two servers), HPE Insight Control and Server Deployment (formerly RDP).
https://www.hpe.com/h20195/v2/getpdf.aspx/4aa0-5964enw.pdf
HPE Installation and Startup Service for HPE BladeSystem c-Class Enhanced Network
Hewlett Packard Enterprise provides for the configuration and testing of BladeSystem Ethernet interconnect switches and Virtual Connect to facilitate proper implementation of network protocols and access to advanced features.
https://www.hpe.com/h20195/v2/getpdf.aspx/4aa0-5969enw.pdf
The Personalized Support option provides an assigned Account Support Manager who can bring best practices from across the industry plus extra technical skills to your IT team. This option is only available as an add-on to HPE Proactive Care Support.
HPE Proactive Select Service Provides a flexible way to purchase HPE best-in-class consultancy and technical services. You can buy Proactive Select Service Credits when you purchase your hardware and then use the credits over the next 12 months. https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855enw.pdf
NOTE: Additional HPE Pointnext operational services can be found at: http://ssc.hpe.com/portal/site/ssc/
Online/Insight Remote Support
resolution. This comes at no additional cost with your HPE solution. Learn more about Insight Remote Support
http://www.hpe.com/info/insightremotesupport/docs and Insight Online http://www.hpe.com/info/insightonline
NOTE: Insight Remote Support is a prerequisite for Proactive Care. All blades within a single HPE
BladeSystem enclosure must be at the same service level
Center
Enterprise business products. Submit support cases online, chat with HPE experts, access support resources or collaborate with peers. Learn more http://www.hpe.com/info/hpesc
The HPE Support Center Mobile App allows you to resolve issues yourself or quickly connect to an agent for live support. Now, you can get access to personalized IT support anywhere, anytime.
HPE Insight Remote Support and HPE Support Center are available at no additional cost with a HPE warranty, HPE Care Pack or Hewlett Packard Enterprise contractual support agreement.
NOTE: HPE Support Center Mobile App is subject to local availability.
materials
the covered hardware product in operating condition, including parts and materials for available and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum usage limitations as set forth in the manufacturer's operating manual, product QuickSpecs, or the technical product data sheet will not be provided, repaired, or replaced as part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced by HPE due to malfunction
QuickSpecs
HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem
Service and Support, HPE Care Pack and Warranty Information
Page 14
http://h17007.www1.hpe.com/us/en/enterprise/servers/warranty/
For more
To learn more on HPE ProLiant servers and HPE BladeSystem servers, please contact your Hewlett Packard
http://www.hpe.com/services/bladesystem
Parts and
Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to maintain
by Hewlett Packard Enterprise due to malfunction.
information
Materials
Enterprise sales representative or Hewlett Packard Enterprise Authorized Channel Partner. Or visit:
the covered hardware product in operating condition, including parts and materials for available and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum usage limitations as set forth in the manufacturer's operating manual, product quick-specs, or the technical product data sheet will not be provided, repaired, or replaced as part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced
QuickSpecs
HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem

Related Options

Page 15
Cabling and
HPE BladeSystem c-Class 10GbE SFP+ to SFP+ 0.5m Direct Attach Copper Cable
487649-B21
HPE BladeSystem c-Class 10GbE SFP+ to SFP+ 1m Direct Attach Copper Cable
487652-B21
HPE BladeSystem c-Class 10GbE SFP+ to SFP+ 3m Direct Attach Copper Cable
487655-B21
HPE BladeSystem c-Class 10GbE SFP+ to SFP+ 5m Direct Attach Copper Cable
537963-B21
HPE BladeSystem c-Class 10GbE SFP+ to SFP+ 7m Direct Attach Copper Cable
487658-B21
HPE C-series SFP+ to SFP+ Active Copper 7.0m Direct Attach Cable
QK701A
HPE C-series SFP+ to SFP+ Active Copper 10.0m Direct Attach Cable
QK702A
HPE FlexNetwork X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
JC784C
HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
JG081C
HPE FlexNetwork X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable
JC784C
HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable
JG081C
HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
JD097C
HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable
JD096C
HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable
JD095C
HPE X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable
J9281B
HPE X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable
J9283B
HPE X242 10G SFP+ to SFP+ 7m Direct Attach Copper Cable
J9285B
HP X242 10G SFP+ to SFP+ 10m Direct Attach Copper Cable
J9286B
HP X242 10G SFP+ to SFP+ 15m Direct Attach Copper Cable
J9287B
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable
JG329A
HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable
JG330A
HPE B-series SFP+ to SFP+ Active Copper 1.0m Direct Attach Cable
AP818A
HPE B-series SFP+ to SFP+ Active Copper 3.0m Direct Attach Cable
AP819A
HPE B-series SFP+ to SFP+ Active Copper 5.0m Direct Attach Cable
AP820A
10GBase-T SFP+ Transceivers
HPE 10GBase-T SFP+ Transceiver
813874-B21
Ethernet Optical Transceivers
HPE BladeSystem c-Class 10Gb SFP+ SR Transceiver
455883-B21
HPE BladeSystem c-Class 10Gb SFP+ LR Transceiver
455886-B21
NOTE: Requires single-mode fiber.
HPE BladeSystem c-Class 10Gb SFP+ LRM Transceiver
455889-B21
HPE BladeSystem c-Class Virtual Connect 1G SFP SX Transceiver
453151-B21
HPE BladeSystem c-Class Virtual Connect 1G SFP RJ-45 Transceiver
453154-B21
HPE X132 10G SFP+ LC SR Transceiver
J9150A
HPE X132 10G SFP+ LC LR Transceiver
J9151A
NOTE: Requires single-mode fiber.
HPE X132 10G SFP+ LC LRM Transceiver
J9152A
HPE LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable
AJ833A
HPE LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable
AJ834A
HPE LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable
AJ835A
HPE LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable
AJ836A
Transceiver Options
QuickSpecs
HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem
Related Options
Page 16
HPE LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable
AJ837A
HPE LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable
AJ838A
HPE LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable
AJ839A
NOTE: In addition to the supported HPE and non-HPE Copper Twinax and Active Copper
Service and
NOTE: HPE Pointnext operational services for the c7000 and c3000 Enclosures cover the
Class
BladeSystem are also covered by the c7000 and c3000 enclosures Care Pack services.
NOTE: Some options, including Fibre Channel and InfiniBand switches for the HPE c-Class
uplifted to match existing storage or server service level.
Proactive Care Services for the c7000 Enclosure
HPE 3 year Proactive Care 24x7 c7000 Enclosure Service
U3C33E
HPE 3 year Proactive Care Call to Repair c7000 Enclosure Service
U3C36E
HPE 3 year Proactive Care 24x7 c7000 Enclosure with Insight Control Service
U3P10E
HPE 3 year Proactive Care Call to Repair c7000 Enclosure with Insight Control Service
U3P13E
Proactive Care Services for the c3000 Enclosure
HPE 3 year Proactive Care 24x7 c3000 Enclosure Service
U3C42E
HPE 3 year Proactive Care Call to Repair c3000 Enclosure Service
U3C45E
HPE 3 year Proactive Care 24x7 c3000 Enclosure with Insight Control Service
U3P19E
HPE 3 year Proactive Care Call to Repair c3000 Enclosure with Insight Control Service
U3P22E
HPE Proactive Care Personalized Support (Environmental Option)
Installation & Start-up Services recommended for the c7000
HPE BladeSystem c7000 Infrastructure Startup Service
UE602E
HPE BladSys c7000 Encd Network Startup Service
UE603E
Installation & Start-up Services recommended for the c3000
HPE BladeSystem c3000 Infrastructure Startup Service
UF817E
HPE BladeSystem c3000 + OS Startup Service
UF818E
HPE BladSys c3000 Encd Network Startup Service
UF814E
Additional HPE Pointnext operational services can be found at:
http://www.hpe.com/info/cpc
SFP+ cables above, Virtual Connect provides "allowed" connections using third party cables that meet the following criteria: connector=copper pigtail; transceiver code=active cable or passive cable; speed equal or less than 10Gb; length between 1m and 7m, inclusive. All "allowed" DACs are connected and logged. Prior to requesting support from HPE, a DAC from the supported list above must be used to verify a cable issue is not involved.
Support Offerings
enclosure, power supplies and fans. HPE Virtual Connect Flex-10/10D Modules for c-
BladeSystem, are not covered under the c7000/c3000 enclosure Care Packs and carry separate Care Packs. Care Pack service level support for these options should always be
QuickSpecs
HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem

Technical Specifications

Page 17
Shipping
Length
13.88 in (352.55 mm)
Width
10.63 in (270.00 mm)
Height
4.75 in (120.65 mm)
Shipping Weight
4.4 lbs (2.0 kg)
Product
Performance
Line Rate, full-duplex 600Gbps bridging fabric
Non-blocking architecture
Maximum transmission unit (MTU) of up to 9216 bytes (jumbo frames)
Connectors and
16 x 10Gb downlinks midplane 4x 10Gb cross connect 10 x 10Gb SR, LR, or LRM fiber u Ethernet and RS
Indicators
Recessed Momentary Reset Switch Momentary Next/Step Switch Backlit port number and status indicator LED, one per bulkhead port, blue/amber/green Module Module locator (UID), blue Link indicator, one per SFP+
Dimensions
Length
10.5 in (267.7 mm)
Width
7.5 in (92.79 mm)
Height
1.1 in (27.94 mm)
Weight
1.27Kg (2.8 Lbs)
Environmental
Temperature Range
Specification
10C to 35C (50F to 95F)
Temperature Range*
Operating
10C to 35C (50F to 95F)
Shipping
Shipping -40C to 60C (-40F to 140F)
Storage
-20°C to 60°C (-4F to 140°F)
Maximum wet bulb temperature
30C (80F)
Relative Humidity (noncondensing)**
Operating
10% to 90%
Shipping
10% to 90%
Storage
10% to 95%
* All temperature ratings shown are for sea level. An altitude derating of 1°C per 304.8 m (1.8°F per 1,000
maximum for storage corresponds to a pressure minimum of 70 KPa.
Power Specification
12V @ 5.83A (70W
Dimensions
Specifications Hardware
Cabling
Ranges
plinks SFP+
-232 internal interface to c-Class Onboard Administrator Module
status indicator, amber/green
-port, green/amber
ft) to 3048 m (10,000 ft) is applicable. No direct sunlight allowed. Upper operating limit is 3,048m (10,000 ft) or 70 Kpa/10.1 psia. Upper non-operating limit is 9,144 m (30,000 ft) or 30.3 KPa/4.4 psia. ** Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F). Altitude
QuickSpecs
HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem
Technical Specifications
Page 18
Product
Security Features
HTTPS (HTTP exchanged over an SSL-encrypted session) is required for access to the Virtual
Access to the Virtual Connect Manager is via the system Onboard Administrator
Each user account can be configured for a combination of four access privileges to control and/or view elements in the Virtual Connect Manager.
Role based customization to assign various privileges to Server Admin, Network Admin and Storage Admin.
User verification by account name and password (Case Sensitive) LDAP Authentication services provide role based security via an LDAP SSL Directory Server connection.
Administrator controlled password length and strength requirements
TACACS+ authentication, authorization and accounting RADIUS authentication and authorization
Private VLAN's for secure connectivity between servers within a domain
Configurable filtering
Compliant with United States Department of Defense Policy on Use of Department of
Defense (DoD) Information Systems Standard Consent Banner and User Agreement
GUI and CLI session timeout
Trunking and
Shared Uplink Sets using Link Aggregation Control Protocol (LACP) allows the creation of Ethernet channeling with upstream switches that conform to IEEE 802.3ad. Ports can alternativ
External ports within a Port Set can be on the same VC Ethernet module or on multiple VC modules within the VC domain.
In the event of an uplink failure to a data center switch, the next highest performance uplink con
Fast MAC Cache failover enables rapid recovery of network connections when a standby module becomes active. Smart Link network senses a failed upstream switch connection and allows teamed NICs to properly failove
Configure uplink speeds to Auto, 1Gb
VLAN Features
802.1Q VLAN supported on uplinks.
Uplink ports can be configured for VLAN tagging at egress or pass VLAN packets from Server ports.
Native VLAN support for untagged packets on a shared uplink set. Packets can be
Specifications Software
Connect Manager.
of multicast traffic
Failover Features
ely be configured for failover only.
nection or aggregation will become active.
r.
or 10Gb on the associated uplinks
-thru of tagged
QuickSpecs
HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem
Technical Specifications
Page 19
targeted to a specific server ports.
Simultaneous tunneled and mapped VLAN connections to a single domain.
Management
Simple and intuitive Graphical User Interface (GUI) for defining, configuring, and managing all elements of the Virtual Connect Domain.
Setup Wizards for server profile creation and initial domain installation and configuration and network configuration.
Comprehensive administration, definition, and management of Shared Uplink Set, and Server Profiles
Embedded SNMP v1, v2 applications to query Virtual Connect for statistics and trap information.
sFlow v5 for flow monitoring and capacity planning.
A enables macros to control common Virtual Connect tasks
Any uplink port can be used as a dedicated mirrored port for traffic analysis and troubleshooting by a Network Analyzer
Domain Management of user accounts, enclosure, Virtual Connect domain settings, and firmware updates
The location and status of Virtual Connect Modules in the Onboard Administrator can be viewed from the Hardware Sta glance detailed information of the hardware elements via mouse
MAC Address Administration allows local administration of predefined or user MAC address ranges.
VC manager runs as a high adjacent bay. All configuration data is stored in flash memory and checkpointed to the standby module. Configurations can also be backed up to a workstation via the GUI.
Up to 128 Network Access Groups can be defined to prevent enabling specific network combinations in the same server profile
Supported by Provides centralized network connection management and workload mobility for thousands of server
Management and
Standards
IEEE 802.1Qbb IEEE 802.1Qaz
802.1AB LLDP
802.1Q (VLAN includes Native VLAN support and server side VLAN tag mapping IEEE 802.2 LLC
802.3ad Link Aggregation IEEE 802.3ae 10Gb Fiber Ethernet IEEE 802.3ak 10Gb CX IEEE 802.3aq 10Gb LRM Ethernet SNMP v.1, v.2, v.3
Features
, v3 and SMI-S agents allow Network Management
robust, scriptable and secure Command Line Interface simplifies management and
-availability pair when a partner module is installed in the
HPE Virtual Connect Enterprise Management v7.3.2 and higher.
s. Learn more at: http://www.hpe.com/info/vcem
Standards Support
-4 Ethernet
Ethernet Network,
or Sniffer.
HPE c-Class Enclosure and
tus page. Including at-a-
-over pop-up windows.
-defined
)
QuickSpecs
HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem
Technical Specifications
Page 20
IGMP v1, v2, v3 FC sFlow v5
Safety and
Safety Certifications
UL/CUL Recognition to UL/CSA 60950-1
TUV to EN 60950-1
CB report and certificate to IEC 60950-1 with all country deviations
CE Marking
Electromagnetic
FCC Part 15 Class A
EN 55022 Class A (CISPR22 Class A)
VCCI Class A
AS/NZS 3548 Class A or AS/NZS CISPR22 Class A
MIC Class A
CE Marking
Environment-
End-of-life
Hewlett Packard Enterprise offers end-of-life Hewlett Packard Enterprise product return information, please go to:
. To recycle your product, p Packard Enterprise sales be recycled, recovered or disposed of in a r
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the site at: recyclers and other WEEE treatment facilities as well as customers who integrate and re-sell Hewlett Packard Enterprise equipment.
-BB5 (FIP Snooping (FCoE) supported only on C7000)
Compliance
Emissions Certifications FCC Part 15 Class A
friendly Products and Approach
Management and Recycling
, trade-in, and recycling programs in many geographic areas. For trade-in
http://www.hpe.com/info/recycle
lease go to: http://www.hpe.com/info/recycle or contact your nearest Hewlett
office. Products returned to Hewlett Packard Enterprise will
esponsible manner.
http://www.hpe.com/info/recycle. These instructions may be used by
Hewlett Packard Enterprise web
Hewlett Packard OEM
QuickSpecs
HPE Virtual Connect Flex-10/10D Module for c-Class BladeSystem

Summary of Changes

Page 21
Date
Version History
Action
Description of Change
23-Oct-2017
From Version 18 to 19
Changed
Care Pack naming and Service and Support- Parts and Materials updated.
04-Sep-2017
From Version 17 to 18
Changed
Supported Products section was updated.
08-May-2017
From Version 16 to 17
Changed
Supported Products, and Related Options sections were updated. URLs updated to hpe.com
16-Dec-2016
From Version 15 to 16
Changed
Related Options section was updated.
Added
SKU added in Related Options section: 813874-B21
21-Oct-2016
From Version 14 to 15
Changed
Rebranding edition.
13-Feb-2015
From Version 13 to 14
Changed
Overview and Supported Products were updated
10-Oct-2014
From Version 12 to 13
Changed
Compatibility and Product Features sections were updated.
15-Aug-2014
From Version 11 to 12
Changed
Cabling and Transceivers were revised.
03-Jul-2014
From Version 10 to 11
Changed
Cabling and Transceivers were revised.
18-Apr-2014
From Version 9 to 10
Changed
Compatibility and product descriptions were revised.
03-Mar-2014
From Version 8 to 9
Changed
Change made in the standard features.
10-Sep-2013
From Version 7 to 8
Changed
Supported Products, Standard Features, and Related Options were revised.
14-Jun-2013
From Version 6 to 7
Removed
Mentions of sFlow support were removed.
10-Jun-2013
From Version 4 to 6
Added
Added the Standard Features section
18-Jan-2013
From Version 3 to 4
Changed
Changes were made in the Overview, Supported Products, Service and Support, Related Options and Technical Specification sections.
Changed
Changes were made in the Models, Supported Products and Related Options sections.
09-Nov-2012
From Version 2 to 3
Changed
Changes were made in Supported Products section.
24-Aug-2012
From Version 1 to 2
Changed
Changes were made in Overview, Compatibility and Related Options sections.
Sign up for updates
© Copyright 2017 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statemen Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.
c04154336
- 14408 - Worldwide - V19 - 23-October-2017
ts accompanying such products and services.
Loading...