HP xp8010, xp8020 Installation Card

xp8010 series

H

!

Be sure to install the projector
into a solid, structural ceiling
member:

Ceiling Mounting Procedure:

4

Before installation, refer to the
user manual for the projection
distance based upon the desired
image size. Use this projection
distance to locate the ceiling
mount.

digital projector

hp

u

Drill four holes into the structural ceiling
member.
Attach the ceiling rod to the ceiling with
the four cylinder screws.

Structural Ceiling

Ceiling Rod

Ceiling Mount
Installation Card

Cylinder Screw

!

HP recommends that a com­petent carpenter or electrician
install this ceiling mount.

v

Mount the projector to the ceiling mount
bracket with the three bracket screws.

Three Bracket Screws

w

Attach the ceiling bracket to the ceiling rod with
the round thumbscrew. Height adjustments can
be made by using different holes on the ceiling
rod and ceiling bracket.

The total adjustment range is15.75 to 25.6

v v

v

v v

inches (40~65cm). Adjusments can be
made in one inch (2.5cm) increments.

Make necessary roll and yaw adjustments to the projector.

x

Round Thumbscrew

Ceiling Bracket

(YAW ADJUSTMENT)

180°

Open the on-screen menu and select Setup > Projector Position. Select the

v v

v

v v

appropriate ceiling option.

C

Copyright Hewlett-Packard Company 2003
First Edition (August 2003)
Printed in Taiwan

(ROLL ADJUSTMENT)

±60° ±20°

P/N 36.87108.001-A