Hp XP7010 video port guide

notebook PC video port guide (also see computer owner’s manual)

computer model key command to activate/deactivate video port

Acer

AST

Canon

Compaq

Dell

Fujitsu Lifebook FN + F10 Gateway

HewlettPackard IBM

Macintosh

Note 350, 750,760, 780, 950 Ctrl-Alt-ESC while computer boots activates the setup

menu; system config; advanced sys config; display

device; LCD/CRT Note 971 FN + F5 Ascentia, Ascentia A Series, PowerExec, 9xxN Ascentia J Series FN + F3 Ascentia P Series, Bravo 800N, B5N FN + F12 Premium Exec FN + D BTO BN + F6 Innova 386NX Setup Menu Options Innova Book 360CD, 490CDS FN + F7 NoteJet 3CX Change CMOS to CRT Armada, LTE, Contura FN + F4 Presario FN + F2 Other Automatic, Ctrl-Alt < Latitude, CP-Inspiron FN + F8

Other Ctrl-Alt-<

650C Set Switch to CRT Epson Other FN + F12

Solo, Liberty FN + F3 Colorbook FN + F1 Colorbook 2 Option in CMOS setup M120T/1000, M100D FN + F7 Hitachi E100D/810 FN + F8 Omnibook, Pavilion FN + F5

Thinkpad 310, 36x, 380, 701, 75x, 760, 560, 770 Thinkpad 350, PS/Note 425C FN + F1 for setup LX40 Setup LCD to CRT Thinkpad 700 Ctrl-Alt-S PowerBook 3400 Select Monitor Icon on PowerBook Control Strip,

PowerBook 1400 Requires optional video card. Select Monitor Icon on

PowerBook 160, 165, 180, 520, 540, 5300

PowerBook 140, 145, 150, 170 No video port. Requires 3rd party interface. G3 PowerBook Reboot G4 PowerBook Command Key + F1 Portable 100 Not compatible

FN + F5

FN + F12

FN + D

FN + F12

FN + F7

select resolution to match display device (e.g.

800x600 Simulscan for simultaneous display on

PowerBook and on projector)

PowerBook Control Strip, select resolution to match

display device (e.g. 800x600 Simulscan for

simultaneous display on PowerBook and on projector)

Control Panel folder, PowerBook Display folder,

activate Video Mirroring, warm reboot. Or (if display

problems occur with mirroring) Control Panel folder,

Monitors, switch primary display by dragging white

menu bar to Monitor 2.

notebook PC video port guide (also see computer owner’s manual)

computer model key command to activate/deactivate video port

Micron Millenia, Transport FN + F2

FN + F12

Mitsubishi All SW2 ON Off Off Off to activate

SW2 Off On On On to de-activate

NEC

Packard Bell All FN + F10

Panasonic All FN + F2

Samsung

Sanyo All Set-up screen option

Toshiba

Winbook XP, XP5 FN + F6 (simul) FN + F10 (int/ext) XP5, Pro, FX FN + F12 XL FN + F2 LM FN + F8

 Hewlett-Packard Company 2002-2003 Printed in Taiwan 5/03

Versa 2000, 4000 series, 5000 series 6000 series, M, P, V, MX series, Ultralite Versa 2400 FN + F10 Versa S FN + F2 Other Select “Active” from set-up

810 FN + F4 55200 Set-up screen option Pro 500 FN + F5 Pro 800, Sens 700 FN + F6

All FN + F5 Sharp 6020, 6030, 6050, Extensa 600CD FN + F12 650CDT FN + End 1000, 1200, 1600, 3100E, 3200 Ctrl-Alt-End 1100 Reboot 1850 Automatic, no simultaneous display T1910 Satellite T1950CT, T1960CT 105CS, 110CT, 115CS, 200CDS, 400, 410, 415, 420, 430, 500CDT, 610, 650CT, 2100CT, 2105CT, 2130CS, 2150CS, 2150CDT, 2150CT, 2400CS, 2400CT, 2450CT, 3600DT, 4500, 4700, 4800, 4850 4900, Tera 700CDT, 720CDT, 730CDT Ctrl-Alt-End 3100 FN + End 3100E, 3200 N/A PORT ACTIVE 3100SX, 3200SX Needs SCSI adapter for external video 3400 N/A PORT ACTIVE 4400sx Ctrl+Alt-End 5100 N/A PORT ACTIVE 5100/100, 5200, 5200/100 Needs SCSI adaptor for external video 610CT FN + F5 Twinhead Slimnote FN + F5

FN +F3

FN + F2

Panasonic set-up program

Type TSetup at DOS prompt, select display location

int/ext/both (internal, external, or both displays)

FN + F5

FN + F7

HP part number 5969-0888