HP (Hewlett-Packard) mx705, FS7600, MV7540, S7540, v7650 User Manual
...User Guide
v75, mx705, MV7540, s7540, FS7600,
v7650 17” CRT Monitors
Document Part Number: 368239-003
December 2004
This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting, regulatory notices, and technical specifications.
© Copyright 2004 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.
Microsoft, MS-DOS, Windows, and Windows NT are trademarks of Microsoft Corporation in the U.S. and other countries.
Intel, Pentium, Intel Inside, and Celeron are trademarks of Intel Corporation in the U.S. and other countries.
Adobe, Acrobat, and Acrobat Reader are trademarks or registered trademarks of Adobe Systems Incorporated.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
This document contains proprietary information that is protected by copyright. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company.
ÅWARNING: Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life.
ÄCAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information.
User Guide
v75, mx705, MV7540, s7540, FS7600, v7650 17” CRT Monitors
Third Edition (December 2004)
Document Part Number: 368239-003
Contents
1Product Features
2Safety and Maintenance Guidelines
Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1
Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . 2–1
Important Safety Information . . . . . . . . . . . . . . . . . . 2–1
Maintenance Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . 2–2
3 Setting Up the Monitor
Attaching the Monitor Base . . . . . . . . . . . . . . . . . . . . . . . 3–1 Removing the Monitor Base . . . . . . . . . . . . . . . . . . . 3–2 Connecting the Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–2 Connecting the Speakers (Available with Select Models) 3–4 Tall Speakers with Base . . . . . . . . . . . . . . . . . . . . . . 3–4 Short Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–6 USB Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–7 Plugging Headphones into the Computer . . . . . . . . . . . . 3–8
4 Operating the Monitor
Software and Utilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1 The Information File . . . . . . . . . . . . . . . . . . . . . . . . . 4–1 The Image Color Matching File . . . . . . . . . . . . . . . . 4–2 Installing the .INF and .ICM Files . . . . . . . . . . . . . . . . . . 4–2 Installing from the CD. . . . . . . . . . . . . . . . . . . . . . . . 4–2 Downloading from the Worldwide Web . . . . . . . . . . 4–3 Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–4
User Guide |
iii |
Contents
On-Screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–5
On-Screen Display Functions . . . . . . . . . . . . . . . . . . 4–6
Monitor Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–8
No Signal Message . . . . . . . . . . . . . . . . . . . . . . . . . . 4–8
Out of Frequency Range Message. . . . . . . . . . . . . . . 4–9
Using the Energy Saver Mode . . . . . . . . . . . . . . . . . . . . 4–10
A Troubleshooting
Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . A–1 Using the Worldwide Web. . . . . . . . . . . . . . . . . . . . . . . . A–4 Preparing to Call Technical Support . . . . . . . . . . . . . . . . A–4
B Technical Specifications
v75, MV7540, s7540 17” curved CRT monitors . . . . . . . B–1 mx705 and FS7600 17” flat CRT monitors . . . . . . . . . . . B–4 v7650 17” flat CRT monitor . . . . . . . . . . . . . . . . . . . . . . B–6
C Agency Regulatory Notices
Federal Communications Commission Notice. . . . . . . . . C–1 Modifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–2 Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–2
Declaration of Conformity for Products Marked with FCC Logo, United States Only. . . . . . . . . . . . . . . . . . . . . . . . . C–2 Canadian Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–3
Avis Canadien . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–3 European Notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–3 Japanese Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–4 Korean Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–4 EPA Energy Star Compliance . . . . . . . . . . . . . . . . . . . . . C–4 Power Cord Set Requirements . . . . . . . . . . . . . . . . . . . . . C–4
iv |
User Guide |
1
Product Features
This color monitor is digitally controlled by the microprocessor-based computer. It provides an easy to use on-screen display menu technology that allows you to adjust the monitor to your specific viewing needs.
The 17-inch/43-centimeter CRT monitor features include:
■16” (41 cm) viewable area display.
■1024 x 768 @85 Hz recommended resolution.
■Tilt and swivel base.
■Monitor AC power cord (available with select models).
■VGA analog signal cable included.
■Speakers and power adapter (available with select models).
User Guide |
1–1 |
Product Features
■Plug and play capability if supported by your system.
■On-screen display (OSD) adjustments for ease of setup and screen optimization; allows you to adjust all elements of the screen image.
■Energy Saver feature for Energy Star Compliance
■Compliant with the following regulated specifications:
EPA ENERGY STAR
European Union CE Directive
Swedish MPR II (available with select models)
Swedish TCO ‘03 (available with select models)
■User documentation
1–2 |
User Guide |
2
Safety and Maintenance
Guidelines
Safety Guidelines
Power Requirements
A power cord is included with your monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with your monitor, refer to the “Power Cord Set Requirements” section in Appendix C.
Important Safety Information
ÅWARNING: To reduce the risk of electric shock or damage to your equipment, do not disable the power cord grounding feature. This equipment is designed to be connected to a grounded (earthed) power outlet that is easily accessible to the operator. The grounding plug is an important safety feature.
ÅWARNING: For your safety, be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment as possible. When you need to disconnect the power to the equipment, unplug the power cord from the power outlet by grasping the plug firmly. Never pull on the cord.
User Guide |
2–1 |
Safety and Maintenance Guidelines
ÄCAUTION: For the protection of your monitor, as well as your computer, connect all power cords for your computer and its peripheral devices (such as a monitor, printer, scanner) to some form of surge protection device such as a power strip or Uninterruptible Power Supply (UPS). Not all power strips provide surge protection; the power strips must be specifically labeled as having this ability. Use a power strip whose manufacturer offers a Damage Replacement Policy so you can replace your equipment if surge protection fails.
Maintenance Guidelines
To enhance the performance and extend the life of your monitor, follow these guidelines:
■Do not open your monitor cabinet or attempt to service this product yourself. If your monitor is not operating properly, or has been dropped or damaged, first unplug from power outlet, then contact your Hewlett-Packard authorized dealer, reseller, or service provider.
■Adjust only those controls that are discussed in the operating instructions.
■Place your monitor at least 3 inches (76 mm) away from walls or other enclosures.
■Use only a power source and connection appropriate for this monitor, as indicated on the label/back plate of the monitor.
■Be sure the total ampere rating of the products connected to the outlet does not exceed the current rating of the electrical outlet, and the total ampere rating of the products connected to the cord does not exceed the rating of the cord. Look on the power label to determine the ampere rating (AMPS or A) for each device.
2–2 |
User Guide |
Safety and Maintenance Guidelines
■Install your monitor near an outlet that you can easily reach. Disconnect the monitor by grasping the plug firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord.
■Turn your monitor off when not in use. You can substantially increase the life of your monitor by using a screen saver program and turning off the monitor when not in use.
■Unplug your monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. If the screen requires additional cleaning, use an antistatic CRT screen cleaner.
ÄCAUTION: Do not use benzene, thinner, ammonia, or any other volatile substances to clean your monitor or the screen. These chemicals may damage the cabinet finish as well as the screen.
■Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered. Never push objects of any kind into cabinet slots or other openings.
■Do not place plants on top of your monitor. Water or dirt from the plant may get into the vents.
■Do not drop your monitor or place it on an unstable surface.
■Do not allow anything to rest on the power cord. Do not walk on the cord.
■Keep your monitor in a well-ventilated area, away from excessive light, heat or moisture. Keep your monitor away from high-capacity transformers, electric motors, and other devices with strong magnetic fields.
■In a two-monitor system, place your monitors as far apart from one another as possible to lessen interference between them.
User Guide |
2–3 |
■Do not place the monitor face down. Damage could result to the front panel controls or the monitor screen.
2–4 |
User Guide |
3
Setting Up the Monitor
Attaching the Monitor Base
1.Carefully position the monitor bottom side up.
2.Align the hooks on the base with the sockets on the bottom of the monitor and attach the base.
3.Push the base toward the front of the monitor until it stops.
User Guide |
3–1 |
Setting Up the Monitor
Removing the Monitor Base
In the event that you need to disassemble the base from the monitor, position the monitor bottom side up and follow these instructions:
1.If you must remove the base attachment, release the catch and slide the base toward the back of the monitor.
2.Lift the base up and away from the monitor.
Connecting the Cables
Before setting up the monitor, place it in a convenient, well-ventilated location near the computer.
1.Turn off the power to the computer and other peripheral devices.
2.Connect the power cord 1 to the back of the monitor, then connect the power cord to a power outlet.
3.Connect the video cable (blue connector) 2 from the back of the monitor to the blue 15-pin connector on the back of the computer. Tighten the cable screws to secure the cable to the connector.
ÄCAUTION: To avoid damaging the video cable, ensure that the cable aligns with the 15-pin connector. Do not force the cable onto the connector.
3–2 |
User Guide |
Setting Up the Monitor
4.Power on the computer and monitor.
If the monitor fails to function properly, refer to Appendix A, “Troubleshooting.”
5.If necessary, adjust the front panel monitor controls according to your personal preference. See Chapter 4, “Front Panel Controls” for detailed information.
The monitor installation is now complete.
User Guide |
3–3 |
Setting Up the Monitor
Connecting the Speakers (Available with Select Models)
Several speaker models are available with select monitors. Refer to the steps below for the speaker model included with your monitor.
Tall Speakers with Base
1.If the speakers and bases are not assembled, attach them by turning each speaker bottom side up. With the opening in the base toward the rear of the speaker, align the key slot on the base with the center tab on the speaker, and then lower the base onto the speaker.
2.Place the speaker set near the monitor so that the speaker with the controls is on the right side when you view the monitor from the front.
3–4 |
User Guide |
Loading...