HP V192b Disassembly Instructions Manual
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP V192b 18.5-inch Monitor
1.0 Items Requiring Selective Treatment
Quantity
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
2
Batteries
All types including standard alkaline and lithium coin
or button style batteries
0
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
1
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB /PCT)
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
1
External electrical cables and cords
3
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants
already listed as a separate item above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
Components, parts and materials containing
refractory ceramic fibers
0
Product End-of-Life Disassembly Instructions
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within t he product which require selective treatment in the right column, as
applicable.
Item Description Notes
weighing > 25 grams (not including PCBs or PCAs
of items
included
EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
Tool Description
Tool Size (if
applicable)
Screw driver
Plastic Zig
Description #3
Description #4
Description #5
3.0 Product Disassembly Process
and materials requiring selective treatment can be removed.
3.1 List the basic steps that should typically be f oll owed to remove components and materials requiring selective treatment:
1. Put the MNT on the clean vinyl
2. Disassembly the screw(1ea)
3. Remove the stand body
4. Open cabinet from set
5. Disassemble the backcov er
6. Disassemble the LVD cable and Inner wire
7. Remove PCBA and cables from LCD module
8.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the item s
contained in the product that require selectiv e t reat ment (with descriptions and arrows identify i ng l ocat i ons).
EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at EL-MF877-01
LG Electronics Disassembly Instruction
Marketing Name / Model
Description
V192b
” monitor
Tool Description
Tool Size (if applicable)
Screw driver
Plastic ZIG
6 Product Disassembly instructions for End-of-Life Product Identification:
18.5
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic
instructions for the disassembly of prod uct s t o remove components and materials requiring select i ve treatment.
1. Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where
components and materials requiring selective treatment can be removed.
2. Product disassembly Process
2.1 List the basic steps that should typically be follo wed t o remove components and materials requiring select i ve
treatment :
2.2 OPTIONAL : Depending upon the complexity of the disassembly process, a grap hic depicting the locations of items
contained within the product which require selective treatment (with descriptions and arrows identifying locations) can
be inserted below:
2.3 How to write
1) Provide a picture of disassembly process
2) All the screws are showed in the picture
3) All the PCBAs are showed in the picture
4) LCD panel are showed in the picture
5) All the accessories like remote controller, batteries, and cables are showed in the picture
3. Related regulations : WEEE directive, EPEAT
1/5
Loading...