HP STORAGEWORKS RACK-MOUNT KITS 1U User Manual

Important

hp StorageWorks

1U Rackmount Tape Enclosure

Setting the SCSI ID with DAT 24 and DLT VS80 tape drives

Most tape drives are able to take advantage of the remote SCSI ID feature of the 1U Rackmount Tape Enclosure. Exceptions are the DAT 24 and DLT VS80 tape drives. This is due to the incompatability of the internal connection between the rear panel switch and the tape drive.

For installations of the DAT 24 and DLT VS80 tape drives in the 1U tape enclosure, refer to the documentation that came with your tape drive for details on setting the SCSI ID using jumpers.

Printed in the U.S.A.

First Edition September 2004

A7443-96008

The information in this document is subject to change without notice.

A7 4 4 3 - 9 6 0 0 8