Warning: This software and accompanying documentation are protected by copyright law and
international treaties. Unauthorized reproduction or distribution of this software, or any portion of it, may
result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under
the law.
Use of this software is governed by the terms of the end user license agreement that accompanies or is
included with such software. Unless otherwise noted in the end user license agreement, or herein, no part of
the documentation accompanying this software, whether provided in printed or electronic form may be
reproduced in any form, or stored in a database or retrieval system, or transmitted in any form or by any
means, or used to make any derivative work (such as translation, transformation, or adaptation) without the
express, prior written consent of WIDCOMM.
Trademark(s) ™ and Registered Trademark(s) ®
WIDCOMM and the WIDCOMM logo are trademarks of WIDCOMM, Inc.
Bluetooth and the Bluetooth logos are trademarks owned by Bluetooth SIG, Inc., U.S.A. and licensed to
WIDCOMM, Inc.
Microsoft, Windows, Outlook are registered trademarks of Microsoft Corporation.
Other brand and product names may be registered trademarks or trademarks of their respective holders.
5.1 Cannot connect to a paired device................................................................................. 35
5.2 Cannot discover services on an un-paired remote device.............................................. 35
5.3 Dial-up Networking service does not start .................................................................... 35
5.4 Determine the Bluetooth Device Address (BDA) of my hardware device.................... 35
5.5 Determine the version of the Host Controller Interface (HCI)...................................... 35
5.6 Determine the version of the Link Manager Protocol (LMP) ....................................... 35
5.7 Find information about the Bluetooth hardware attached to my computer ................... 36
5.8 Internet Connection Sharing does not work .................................................................. 36
5.9 Test a Network Access connection................................................................................ 36
5.10 Unknown Port message when using a Bluetooth serial port ......................................... 36
5.11 Bluetooth headset doesn’t always function under WIN 98 ........................................... 36
Table of Figures
Figure 1: Bluetooth Icon.................................................................................................... 2
Figure 2: Device Icons for Windows 9x, Me and 2K........................................................... 2
Figure 3: Service Icons for Windows 9x, Me and 2K.......................................................... 3
Figure 4: Device Icons for Windows XP............................................................................. 3
Figure 5: Service Icons for Windows XP............................................................................ 4
WIDCOMMinc
iii
BTW User’s Guide
1 Introduction
1.1 B
The Bluetooth tray resides in the Windows system tray, which is normally located in the
lower-right corner of the screen. The Bluetooth tray provides fast access to most
Bluetooth operations.
From the Bluetooth tray you can:
LUETOOTH TRAY
•
Access My Bluetooth Places—Double-click the Bluetooth icon, or right-click the
Bluetooth icon and then select Explore My Bluetooth Places.
•
Access the Bluetooth Setup Wizard—This wizard will help you:
!
Configure how this computer accesses a service on another Bluetooth device.
!
Locate remote Bluetooth devices.
!
Configure the way that this computer provides services to remote Bluetooth
devices.
!
Set the name and type of this Bluetooth device, e.g., “John’s PC” and
“Desktop.”
•
Access the Bluetooth Configuration Panel—right-click the Bluetooth icon, and
then select Advanced Configuration.
•
Access the Quick Connect option—right-click the Bluetooth icon, select Quick
Connect, and then select the type of service to which you wish to connect.
•
Start/Stop Bluetooth on this computer.
1.2 A
My Bluetooth Places is part of Windows Explorer.
There are multiple ways to access My Bluetooth Places:
CCESS MY BLUETOOTH PLACES
•
In the Windows system tray.
!
Right-click the Bluetooth icon and select Explore My Bluetooth Places.
or
!
Double-click the Bluetooth icon.
•
On the desktop, double-click the Bluetooth icon.
•
Open Windows Explorer and select My Bluetooth Places in the Folders pane or
from the Address shortcut menu.
WIDCOMMinc
1
BTW User’s Guide
1.3 I
CONS USED FOR BLUETOOTH DEVICES AND SERVICES
Bluetooth icons provide at-a-glance feedback about a device or service‘s status by
changing appearance.
The Bluetooth icon in the Windows system tray provides feedback about Bluetooth
status.
Figure 1: Bluetooth Icon
Bluetooth Icon Indicates Bluetooth Status
Enabled Disabled Connected
Blue with White
Blue with Red
Blue with Green
Figure 2: Device Icons for Windows 9x, Me and 2K
Device Icons for Windows 9x, Me and 2K
Name Normal Connected Paired
Audio Gateway
Desktop
Headset
Human Interface Device
Laptop
Modem
Network Access Point
Personal Digital Assistant
Printer
Telephone
Unknown
WIDCOMMinc
2
BTW User’s Guide
Figure 3: Service Icons for Windows 9x, Me and 2K
Name Normal Connected Not Available*
Audio Gateway
Dial-up Networking
Fax
Headset
Network Access
PIM Item Transfer
Service Icons for Windows 9x, Me and 2K
PIM Synchronization
Public Folder
Serial Port
*Services may be unavailable because they are in use or because the necessary hardware is not installed.
Figure 4: Device Icons for Windows XP
Device Icons for Windows XP
Name Normal Connected Paired
Audio Gateway
Desktop
Headset
Human Interface
Device
Laptop
Modem
WIDCOMMinc
3
BTW User’s Guide
Figure 4: Device Icons for Windows XP (Continued)
Name Normal Connected Paired
Network Access Point
Personal Digital
Assistant
Printer
Telephone
Device Icons for Windows XP
Unknown Device
Figure 5: Service Icons for Windows XP
Service Icons for Windows XP
Name Normal Connected Not Available*
Audio Gateway
Dial-up Networking
Fax
Headset
Network Access
PIM Item Transfer
PIM Synchronization
Public Folder
Serial Port
*Services may be unavailable because they are in use or because the necessary hardware is not installed.
WIDCOMMinc
4
BTW User’s Guide
2 Basic Operations
2.1 S
To start Bluetooth: in the Windows system tray, right-click the Bluetooth icon and
select Start the Bluetooth Device. The Bluetooth icon is blue in color with a white insert
when Bluetooth is running.
To stop Bluetooth: in the Windows system tray, right-click the Bluetooth icon and select
Stop the Bluetooth Device. The Bluetooth icon is blue in color with a red insert when
Bluetooth is stopped.
2.2 C
In the Windows system tray, right-click the Bluetooth icon, select Quick Connect and
then the Bluetooth service that you wish to use.
If this computer has created a connection to the desired type of service in the past, the
options on the shortcut menu are:
If this computer has never created a connection to this type of service, the only option on
the shortcut menu is “Find Devices….” Select this option to search for devices that
potentially provide the desired service, select a device from the list, and then click
Connect.
TART OR STOP BLUETOOTH
REATE A CONNECTION FROM THE BLUETOOTH ICON IN THE SYSTEM TRAY
The name(s) of any device(s) with which prior connections to this type of service
•
have been established. Select a name from the list to re-establish connection.
•
Other Devices…Select this option to search for additional devices that potentially
provide the desired service, select a device from the list, and then click Connect.
2.3 C
2.4 C
NOTE: Only available services are displayed in the menus.
REATE A CONNECTION USING THE BLUETOOTH SETUP WIZARD
•
From the Folders pane of Windows Explorer, right-click My Bluetooth Places
and select Bluetooth Setup Wizard.
or
•
In Windows Explorer, with My Bluetooth Places selected, from the Bluetooth
menu, select Bluetooth Setup Wizard.
or
•
From the Windows system tray: right-click the Bluetooth icon and select
Bluetooth Setup Wizard.
Follow the wizard‘s on-screen instructions.
REATE A CONNECTION FROM ENTIRE BLUETOOTH NEIGHBORHOOD
From Windows Explorer:
•
In the Folders pane, select Entire Bluetooth Neighborhood, right-click a device
name and select “Connect…” the desired service.
or
•
In the Folders pane, expand Entire Bluetooth Neighborhood, select a device, and
then, in the right pane, right-click a service provided by that device and select
“Connect to…”
WIDCOMMinc
5
BTW User’s Guide
2.5 F
NOTE: The Bluetooth menu is only visible when My Bluetooth Places is active.
2.5.1 Periodic Search for Devices
IND BLUETOOTH DEVICES
Search for Devices looks for Bluetooth devices in the vicinity and displays the devices
that it finds in My Bluetooth Places.
To start a search for devices, in the Folders pane of My Bluetooth Places, select Entire
Bluetooth Neighborhood, and then, from the Bluetooth menu, select Search for Devices.
Bluetooth can be configured to automatically search for devices on a regular basis
(Bluetooth Configuration Panel > Discovery tab).
One of the advantages of Bluetooth is the mobility that the wireless connections allow.
However, mobility means that devices may move in or out of connection range during the
time between the automatic updates performed by Bluetooth. To be certain that the
displayed list of devices in the neighborhood is current, or if automatic periodic inquiry
is not enabled, force an update of the device list using the technique described in Search
for Devices, above.
Some devices within connection range may not show up in the list of devices found
because:
Your device is configured to report only specific types or classes of devices
•
(Bluetooth Configuration Panel > Discovery tab, on your device).
• The unlisted device is configured to be non-discoverable (Bluetooth
Configuration Panel > Accessibility tab, on the un-listed device).
2.6 F
IND A SERVICE
The process of determining the services that a device provides is called Service
Discovery.
To initiate a Service Discovery—In the Folders pane of My Bluetooth Places, right-click
a device name and select Discover Available Services from the shortcut menu.
Bluetooth services are those things that this computer can do for remote Bluetooth
devices. For example, if this computer allows a remote Bluetooth device to send a fax
using a fax modem that is physically attached to this computer, then this computer
is providing the Bluetooth fax service.
Some services are hardware dependant; this computer cannot provide the fax service
unless it has a physical fax modem, for example.
Some Bluetooth services use virtual “hardware.” The Bluetooth Serial Port service, for
example, does not use a physical port on this computer. Instead, it creates virtual serial
ports that Windows applications can see and use as if they were actual physical ports.
Each Bluetooth service that this computer is capable of providing can be started
automatically when Bluetooth starts. Each service can be set up to require security
measures before allowing a remote Bluetooth device to connect.
WIDCOMMinc
6
BTW User’s Guide
Bluetooth services require a Bluetooth application on the remote device; services and
applications usually have coinciding names; i.e., there is a Bluetooth Fax Service and a
Bluetooth Fax Application.
The services supported by Bluetooth are:
Bluetooth Serial Port—A wireless connection between two devices. This
•
connection can be used by applications as though a physical serial cable
connected the devices.
•
Dial-up Networking—Allows a device to use a modem that is physically attached
to another Bluetooth device.
•
Fax—Allows a device to send a fax using a remote Bluetooth cell phone,
modem, or computer.
•
File Transfer—Allows a device to perform file system operations on another
Bluetooth device; browse, open, copy, etc.
•
Headset—Allows a Bluetooth headset to be used as the audio input/output
mechanism for another Bluetooth device, such as a computer or cell phone.
•
PIM Item Transfer—Allows two Bluetooth devices to exchange Personal
Information Manager data such as business cards, calendar items, email
messages, and notes.
•
PIM Synchronization—Allows two Bluetooth devices to synchronize Personal
Information Manager data.
•
Network Access—Allows a device to access a Local Area Network via a second
Bluetooth device that is physically connected to the network or allows a remote
device to become part of an ad hoc network provided by the Bluetooth server.
•
Audio Gateway—Allows the microphone/speakers on Bluetooth device
(typically a computer) to be used as the audio input/output mechanism for a
remote Bluetooth device, such as a cell phone.
All Bluetooth servers do not necessarily provide all of these services. For example,
network gateways may provide only the Network Access service.
2.7 B
WIDCOMMinc
LUETOOTH CONNECTION STATUS
The Bluetooth Connection Status dialog box displays information about the state of a
connection and provides a means to disconnect an active connection.
Display the Connection Status dialog box—In My Bluetooth Places, from the Folders
pane, select a device, and then, in the right pane of My Bluetooth Places, right-click a
service name and select Status from the shortcut menu.
The Information provided is:
•
Status—“Connected” or “Not Connected.”
•
Device Name—The name of the device to which this computer is connected.
•
Duration—The length of time that this connection has been established,
displayed in hours, minutes and seconds. Depending on the service, the
connection may time out (automatically disconnect) after a specific period of
inactivity.
•
Activity—The number of bytes sent and received over the connection.
•
Signal Strength—A graphic indicator that ranges from Too Weak through Good
to Too Strong.
7
BTW User’s Guide
NOTE: To change the power transmission level of this computer: from the Bluetooth
Configuration Panel, Hardware tab, click the Advanced button, and then change
the setting in the Maximum Power Transmission drop-down list. The Advanced
button is not available in all countries.
The controls in the Bluetooth Connection Status dialog box are:
•
Properties button—Displays the Bluetooth Properties dialog box for this
connection.
•
Disconnect button—Closes this connection.
•
Close button—Closes the Bluetooth Connection Status dialog box.
2.8 S
END TO BLUETOOTH
This feature is used to send information to another Bluetooth device. Data types include:
•
Files from Windows Explorer
•
Documents from Microsoft Office applications, including:
!
Word
!
Excel
!
Access
!
PowerPoint
•
Microsoft Outlook items, including:
!
Contacts
!
Appointments
!
Tasks
!
Messages
!
Notes
To use Send to Bluetooth
1. In the application:
a) Windows Explorer—Select one or more files to be transferred. Folders
cannot be transferred.
b) Microsoft Office—Only the document in the active window can be
transferred.
c) Microsoft Outlook—Select one or more items to be transferred.
2. From the application’s File menu, select Send To, and then select Bluetooth from
the shortcut menu.
3. Select a device from the shortcut menu to send the data.
or
Select Other... choose a device from the list, and then click OK to send the data.
WIDCOMMinc
8
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.