In a continuing effort to improve the quality of our products, technical and environmental information
in this document is subject to change without notice.
This manual and any examples contained herein are provided “as is” and are subject to change without
notice. Hewlett-Packard Company makes no warranty of any kind with regard to this manual,
including, but not limited to, the implied warranties of merchantability and fitness for a particular
purpose. Hewlett-Packard Co. shall not be liable for any errors or for incidental or consequential
damages in connection with the furnishing, performance, or use of this manual or the examples herein.
Consumer transactions in Australia and the United Kingdom: The above disclaimers and limitations
shall not apply to Consumer transactions in Australia and the United Kingdom and shall not affect the
statutory rights of Consumers.
The programs that control this product are copyrighted and all rights are reserved. Reproduction,
adaptation, or translation of those programs without prior written permission of Hewlett-Packard Co.
is also prohibited.
Portions of the programs that control this product may also be copyrighted by Microsoft Corporation,
SystemSoft Corp., Insyde Software Corporation, S3 Graphics Incorporated, and Adobe Systems
Incorporated. See the individual programs for additional copyright notices.
This product incorporates copyright protection technology that is protected by method claims of
certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology must be authorized by Macrovision
Corporation and is intended for home and other limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Microsoft®, MS-DOS®, and Windows® are U.S. registered trademarks of Microsoft Corporation.
Pentium® and the Intel Inside logo are U.S. registered trademarks and Celeron™ and SpeedStep™
are U.S. trademarks of Intel Corporation. Adobe® and Acrobat® are trademarks of Adobe Systems
Incorporated.
All certifications may not be completed at product introduction. Check with your HP reseller for
certification status.
This equipment is subject to FCC rules. It will comply with the appropriate FCC rules before final
delivery to the buyer.
Hewlett-Packard Company
Mobile Computing Division
19310 Pruneridge Ave.
Cupertino, CA 95014, U.S.A.
This manual provides reference information for servicing HP Pavilion zt1100/xz100 and
Omnibook xt1000 notebook PCs. It is for use by HP-authorized service personnel while installing,
servicing, and repairing these products.
The manual is designed as a self-paced guide that will train you to install, configure, and repair these
notebooks. The manual is self-contained, so you can follow it without having equipment available.
The following table lists other sources of information about the notebook and related products.
HP Partnership web site http://partner.americas.hp.com Restricted to Authorized Resellers
HP Asia Pacific Channel
Support Centre for DPSP
Partners
HP/MCD web site http://www.mcd.hp .com HP’s internal web site f or division
America Online Keyword: HP Call (800) 827-6364 for membership
CompuServe GO HP Call (800) 524-3388 for membership
HP Support Assist CD (800) 457-1762 US and Canada.
(801) 431-1587 Outside US and Canada.
Microsoft Windows manual Information about Windows operating
Microsoft web site http://www.microsoft.com Information and updates for Windows
www.hp.com/go/bizsupport
http://www.hp.com .au Restricted to DPSP Partners only.
only.
information.
within the US.
within the US.
system.
operating systems.
vi HP Pavilion zt1100/xz100 Omnibook xt1000
1
Product Information
The HP Pavilion zt1100/xz100 and Omnibook xt1000 series are reliable notebook computers for the
budget-minded user—whether at school, at home, or as part of a growing business—who wants a thin,
light notebook that will meet basic mobile computing needs.
Table 1-1. Pavilion zt1100/xz100 and Omnibook xt1000 Series Models
Intel Mobile Pentium III (PIII-M) or Celeron-T (Cel) processor.
2
Combo optical drive = DVD + CD-RW.
3
Full-featured SKUs include multimedia buttons, LCD status display, and IEEE1394.
Drive
Standard
SDRAM
CD/DVD
drive 2
Fullfeatured 3
Modem/
LAN
Wireless
HP Pavilion zt1100/xz100 Omnibook xt1000 Product Information 1-1
Technology Codes
HP does not change the name of a product every time the product’s technology changes. While this
helps ensure continuing market momentum for HP products, it complicates technology deployment
and support processes.
To help solve this problem, HP has added a technology code to the serial number of each of its
products. Since the BIOS must be matched to the notebook’s hardware, the same code is used for the
BIOS and the hardware. This manual refers to technology code deferences where applicable.
The table below shows the technology codes and the changes they signify for the products. Before
downloading software or drivers or performing repairs, note the technology code for the HP notebook
model.
Note that the first two characters of the BIOS ID (for example, IB.M1.02) indicate the hardware
technology. You can also determine the BIOS ID using the BIOS configuration utility, or by pressing
Esc during the boot process when the HP logo appears.
This manual contains service information for products with the following technology code.
Technology code Product name Details
IB Pavilion zt1100/xz100 series
Omnibook xt1000 series
Intel Pentium III-M and Celeron-T based platform
supported with Via chipset and S3 integrated graphics.
1-2 Product Information HP Pavilion zt1100/xz100 Omnibook xt1000
Features
The following illustrations show the notebook’s main external features. For an exploded view of the
notebook, see page 4-2.
Figure 1-1. Front View
1. One-Touch buttons.
2. Power button.
3. Keyboard status lights: Caps Lock, Num Lock,
CD drive activity.
4. Touch pad/scroll pad on-off button (with on-off
indicators on either side).
5. Left and right click buttons.
6. Touch pad.
7. Scroll pad
8. Volume controls (selected models).
9. Mute button and indicator light (selected models).
10. Removable CD, DVD, CD-RW, or DVD/CD-RW
drive.
11. CD/DVD eject button.
12. Speaker (one on each side).
13. Latch.
14. Built-in microphone.
HP Pavilion zt1100/xz100 Omnibook xt1000 Product Information 1-3
Figure 1-2. Back View
15. AC adapter jack.
16. Parallel port (LPT1) (colored burgundy).
17. External monitor (VGA) port (colored blue).
18. S-video (TV out) port (colored yellow)
(selected models).
19. Universal serial bus (USB) ports (2).
20. Audio line-out jack (colored lime green) and
external microphone jack (colored pink).
21. Reset switch.
22. Kensington lock slot (security connector).
23. LAN port and indicators.
24. Modem port (selected models).
25. IEEE 1394 connector (selected models).
26. PC Card slot (Type II or Type III, lower slot only).
27. PC Card eject button.
28. Hard disk drive.
29. Wireless on-off button and indicator light
(selected models).
30. Universal serial bus (USB) port.
31. Headphone jack (colored lime green).
1-4 Product Information HP Pavilion zt1100/xz100 Omnibook xt1000
Figure 1-3. Bottom View
32. Infrared port (selected models).
33. Battery.
34. CD/DVD drive latch.
35. Expansion SDRAM cover.
36. Battery latch.
37. Docking port.
38. Mini-PCI cover.
39. Hard disk drive retaining screws.
HP Pavilion zt1100/xz100 Omnibook xt1000 Product Information 1-5
Operation
This section gives an overview of the notebook’s operation.
Turning the Notebook On and Off
You can start and stop the notebook using its power button. However, at times you may want to use
other methods to start or stop the notebook—depending on power considerations, types of active
connections, and start-up time.
Note
This manual describes the notebook in its original factory configuration, with all settings at their
default values.
Table 1-2. Activating Power Modes
Power mode To enter this mode To turn on again
On
Power mode status light is green.
Standby
Maintains current session in RAM.
Turns off the display and other components.
Saves significant power.
Restarts quickly.
Restores network connections.
Power mode status light is amber.
Hibernation
Saves current session to disk, then turns off.
Saves maximum power.
Restores network connections.
Power mode status light is off.
Turn off
Turns off without saving current session.
Saves maximum power.
At startup, resets everything, and starts a new
session.
Power mode status light is off.
Press the power button.
Click Start, Turn Off Computer,
Stand By
–or–
press the power button
–or–
allow timeout.
Click Start, Turn Off Computer,
then press and hold Shift and click
Hibernate
–or–
allow timeout.
Click Start, Turn Off Computer,
Turn Off
–or–
press and hold the power button
for four seconds (only if the Start
menu procedure doesn’t work).
Press the power
button to quickly
resume your
session.
Press the power
button to resume
your session.
Press the power
button to start with
a new session.
1-6 Product Information HP Pavilion zt1100/xz100 Omnibook xt1000
Checking the Notebook’s Status
The notebook’s status lights report power and battery status, keyboard status, and drive activity.
Figure 1-4. Main Status Lights
1. Hard disk drive activity.
• On: the notebook is accessing the hard disk drive.
2. Power mode.
• Green: the notebook is on (even if the display is off).
• Amber: the notebook is on standby.
• Off: the notebook is off or in hibernation.
3. Battery charge status.
• Green: the AC adapter is connected and the battery is fully charged.
• Amber: the AC adapter is connected and the battery is charging.
• Red: the AC adapter is connected and the battery has a fault.
• Off: the AC adapter is not connected or the battery is missing.
HP Pavilion zt1100/xz100 Omnibook xt1000 Product Information 1-7
Figure 1-5. Keyboard Status Lights
1. Caps Lock. Caps Lock is active.
2. Num Lock. Num Lock is active. (The Keypad Lock must also be on to use the
embedded keypad.)
3. CD drive activity. The CD drive is active.
Using Fn Hot Keys
The combination of the Fn key plus another key creates a hot key—a shortcut key sequence—for
various system controls. To use a hot key, press and hold Fn, press the appropriate second key, then
release both keys.
Table 1-3. Fn Hot Keys
Hot Key Effect
Fn+F1 Decreases the display brightness.
Fn+F2 Increases the display brightness.
Fn+F5 Toggles among the built-in display, an external display, and simultaneous display on
both.
Fn+F8 Toggles the built-in numeric keypad on and off. Does not affect an external keyboard. If
Num Lock is on, the numeric functions are active; otherwise, cursor control is active.
Fn+Num Lock Toggles Scroll Lock on and off.
Fn+Page Up Increases the volume (and turns audio on if muted).
Fn+Page Down Decreases the volume.
Fn+Backspace Toggles the mute function on and off.
Fn+any One-Touch
button
Toggles the One-Touch button LEDs on and off (selected models).
1-8 Product Information HP Pavilion zt1100/xz100 Omnibook xt1000
Resetting the Notebook
Occasionally, Windows or the notebook may stop responding, so that you cannot turn the notebook
off. If this happens, try the following in the order listed:
• If possible, shut down Windows: click Start, Turn Off Computer, Turn Off.
• Press Ctrl+Alt+Del, then click Shut Down.
• Press and hold the power button for about four seconds, until the display turns off.
• Use a pen or straightened paper clip to press the reset switch on the back of the notebook.
Figure 1-6. Resetting the Notebook
Press the power button to turn the notebook on again.
Note
To boot from a CD or DVD, insert a bootable CD (such as the Recovery CDs) into the drive, then
restart. Press Esc when the HP logo appears, then select the CD-ROM/DVD drive as the
temporary boot device.
HP Pavilion zt1100/xz100 Omnibook xt1000 Product Information 1-9
Using the CD or DVD Player (selected models)
The multimedia buttons on the front of the notebook control the CD/DVD player, and work in much
the same way as do the controls of a standalone CD or DVD player. The player operates whether the
notebook is on, off, on standby, or in hibernation. (When the notebook is on, the volume control
buttons also govern the volume for most audio applications.)
If the notebook is off, on standby, or in hibernation, slide the multimedia power switch to the left to
activate the player. For details about using the CD/DVD player, see the notebook’s Reference Guide.
1. MP3 player launch button.
2. Previous track button.
3. Next track button.
4. Status panel button.
Figure 1-7. Multimedia Buttons and Status Panel
5. Status panel.
6. Play/Pause button.
7. Stop button.
8. Multimedia power switch and indicator light.
1-10 Product Information HP Pavilion zt1100/xz100 Omnibook xt1000
Specifications
The following tables list the specifications for the notebook and its accessories. These are subject to
change: for the latest versions, see the HP Notebook web site, www.hp.com/notebooks (in Europe:
www.europe.hp.com/notebooks).
Hardware Specifications
Table 1-4. Pavilion zt1100/xz100 and Omnibook xt1000 Series Hardware Specifications
Physical Attributes Dimensions:
13.3/14.1-in models: 318 × 273 × 35.8 mm (12.5 × 10.75 × 1.4 in).
15-in models: 330 × 278 × 37.5 mm (12.99 × 10.94 × 1.47 in).
Thickness varies across unit.
Weight: 2.3 kg (5.0 lbs) minimum, depending on model.
Processor and
Bus Architecture
Graphics
Power
Mass Storage
CD/DVD drive
SDRAM
Audio System
Intel Mobile Pentium III-M processor (starting at 933 MHz) with SpeedStep
technology.
–or–
Intel Celeron processor (starting at 866 MHz).
13.3/14.1/15-in XGA (1024x768) or 15-in SXGA+ (1400x1050) TFT LCD display.
Supports 16 million colors, 3D and OpenGL graphics.
Supports hardware acceleration for MPEG. Display driver supports MPEG2 overlay.
Supports simultaneous LCD+CRT operation (same image on both displays).
Integrated VGA.
Up to 32-MB video memory (shared with system memory).
Supports NTSC and PAL TV.
Dual display for LCD and external monitor or TV.
Rechargeable lithium-ion or NiMH battery.
Battery life depends on notebook type and usage, and battery type and calibration.
Low-battery warning.
Standby/hibernate and resume capability.
Universal AC adapter: 100–240 Vac (50/60 Hz) input, 19 Vdc output, 60 W.
10- to 40-GB removable IDE hard disk drive.
Supports optional 1.44-MB floppy disk drive module.
Two slots for SDRAM expansion (SODIMM, PC133) up to 1024 MB (2x512MB).
133-MHz RAM bus.
Built-in microphone.
Stereo sound through two built-in speakers. 1.5 W per channel.
Polk Audio certified on 15-in models.
Dedicated mute and volume controls (selected models).
CD player (can play while notebook is on standby, in hibernation, or off).
3D-enhanced PCI bus audio.
HP Pavilion zt1100/xz100 Omnibook xt1000 Product Information 1-11
Keyboard and
Pointing Devices
Input/Output
Expandability
Security Features
Environmental Limits
Major ICs
87/88/91-key touch-type QWERTY keyboard with 101/102 key emulation.
Embedded numeric keypad.
12 function (Fn) keys.
5 user-programmable One-Touch buttons.
Touch pad with lock button and on-off indicator.
Left and right click buttons, vertical scroll pad.
3 universal serial bus (USB) ports.
15-pin VGA video-out (blue) with DDC support. (Resolution up to 1600×1200×64K or
16M colors. Refresh rate of 60 to 100 Hz, depending on resolution and color depth.)
RJ-45 LAN jack.
25-pin bi-directional high-speed ECP/EPP parallel (burgundy).
S-video TV out (yellow) (selected models).
4-Mbps IrDA-compliant infrared port (selected models).
IEEE 1394 port (selected models).
Docking port: supports optional simple port replicator.
One Type II or Type III 16/32-bit PC Card slot (3.3- and 5-V support).
CardBus enabled.
Optional simple port replicator (selected models).
User and administrator passwords.
DMI-accessible electronic serial number.
Kensington MicroSaver lock slot.
Operating temperature: 0 to 40 °C (32 to 104 °F).
Operating humidity: 10 to 90 percent RH (0 to 45 °C).
Operating altitude: up to 10,000 ft (3000 m) at 25 °C (77 °F).
Storage (non-operating) temperature: –20 to 65 °C (–4 to 149 °F).
CPU: Intel Mobile Pentium III or Celeron processor.
North Bridge: VIA Pro Savage Pn 133T.
South Bridge: VIA VT8231.
Display controller: S3 Savage 4 in North Bridge.
Audio controller: VIA/Realtek ALC201 AC97 Codec.
CD player controller: O2 OZ-163.
LAN: Realtek RTL8100L.
CardBus controller: ENE 1410.
Keyboard/embedded controller: National NS87591.
Super I/O: in South Bridge.
1-12 Product Information HP Pavilion zt1100/xz100 Omnibook xt1000
Table 1-5. Pavilion zt1100/xz100 and Omnibook xt1000 Series Accessories
Accessory Description
New Accessories
F3172A Standard LiIon Battery
F3491A CD-RW Upgrade Module
F3492A DVD Upgrade Module
F3493A CD-RW/DVD Combo Drive
F3494A Simple Port Replicator
Tested Cross-Platform Accessories
D9510B USB Floppy Disk Drive Module
F1455A Auto Air Adapter (75 W)
F1606A Omnibook Ballistic Nylon Case
F1607A Omnibook Leather Case
F1608A Omnibook Executive Case
F1626B 3COM 10/100 Enet PC Card
F1645A Kensington Lock
F1747A Defcon Alarm
F1771A Universal Carrying Case
F1778A Promotional Carrying Case (NAM & AP)
F1778B Standard Carrying Case (Europe Only)
F1781A Ultra Slim Line Adapter (60 W)
F1782A 3COM Type II Combo Card
F2020A Executive Leather Case (Europe only)
F2135B Wireless Comm Access Point
F2135C Wireless Comm Access Point
F2136B Wireless PC Card (128 bits)
F2196A 3Com Bluetooth PC Card
F2297A Car Adapter, 24 V (EU only)
F2298A 512 MB PC133 SDRAM
F3495A 128 MB PC133 SDRAM
F3496A 256 MB PC133 SDRAM
P1980A USB Wireless LAN 802.11b
P1981A USB Wireless LAN Access Point
HP Pavilion zt1100/xz100 Omnibook xt1000 Product Information 1-13
Internal Design
The motherboard PCA is the central component of the notebook’s design, and plays a role in virtually
all system functions. The CPU module and most other subsystems connect to the motherboard.
The following figure shows the electrical connections among the notebook’s replaceable electronic
modules. In addition, the table on page 1-15 lists the roles that the replaceable modules play in each of
the notebook’s functional subsystems.
Fan
Top case
touch/scroll pads,
click buttons, CD
player, IR (optional)
PCMCIA card
Hard disk drive
Speakers
CPU module
Display
assembly
Keyboard
cover switch
PCA
Mini-PCI card
Motherboard PCA
CD/DVD drive
PCMCIA
socket
Bluetooth
PCA
USB PCA
Keyboard
Battery
SDRAM modules
Volume control
PCA
Figure 1-8. Replaceable Module Diagram
1-14 Product Information HP Pavilion zt1100/xz100 Omnibook xt1000
Table 1-6. Functional Structure
Function Components Used Component Roles
Bootup
Processor
Memory
Power
Display
Hard disk
Keyboard
Touch pad
Audio
Status
Parallel
USB
PCMCIA
Infrared
Wireless
Docking
PC card
CPU module
Motherboard
Hard disk drive
CD/DVD drive module
CPU module
Motherboard
SDRAM module Video RAM (shared).
Battery
Motherboard
Keyboard cover
switch PCA
AC adapter
Motherboard
Display assembly
Motherboard
Hard disk drive
Motherboard
Keyboard
Keyboard cover
CD player PCA
Motherboard
Top case
Motherboard
Display assembly
USB PCA
Volume control PCA
Speakers
Motherboard
Top case
Keyboard cover
switch PCA
CD player PCA
Guide, hard disk drive (page 2-38).
Heatsink (page 2-22).
• Keyboard (page 2-11).
Module, CPU (page 2-25).
• Module, plug-in (page 2-5).
• Module, expansion SDRAM (page 2-13).
• Module, system SDRAM (page 2-14).
PCA, CD player (page 2-38).
PCA, inverter (page 2-20)
PCA, motherboard (page 2-32).
PCA, USB (page 2-38).
PCA, volume control (page 2-39).
Saddles, hinge (page 2-30).
Socket, PCMCIA (page 2-39).
Speaker, left (page 2-39).
Speaker, right (page 2-39).
• Tray, hard disk drive (page 2-7).
2
Caution
Always provide proper grounding when performing repairs. Without proper
grounding, an electrostatic discharge can damage the notebook and its
components.
Notes
To reassemble a component, perform the removal procedure in reverse order. Any special notes
required for reassembly are included at the end of each section.
Symbols like this are used throughout this chapter to show approximate full-size screw
outlines. Use these to verify the sizes of screws before you install them. Installing a wrong-size
screw can damage the notebook. (The symbol shown represents an M2.5×5mm T-head screw.)
HP Pavilion zt1100/xz100 Omnibook xt1000 Removal and Replacement 2-1
Disassembly Flowchart
The following diagram shows the general “paths” you will use in disassembling the notebook to access
any particular component.
Start
Battery, AC adapter, secondary
SDRAM module, mini -P CI card,
hard disk drive, DVD/CD-RW drive
Keyboard cover
A
Left speaker
Display assy
Primary SDRAM
B
Heatsink
CPU module
Keyboard
Fan
Right speaker
motherboard or
Modules on
path A
Top case
If removing
bottom case,
modules on
path B
• CD player PCA
• Infrared PCA
• Hard disk drive guide *
Hinge saddles
Motherboard or
bottom case
• I/O PCA
• Volume control PCA
• Docking doors
• PCMCIA doors
• PCMCIA socket
Figure 2-1. Disassembly Flow
2-2 Removal and Replacement HP Pavilion zt1100/xz100 Omnibook xt1000
Table 2-2. Required Equipment
• #0 Phillips screwdriver, preferably magnetized.
• Small flat-blade screwdriver.
Table 2-3. Recommended Screw Torques
Screw Thread Size Torque (cm-kgf) Torque (in-lbf)
M2.5 (2–11 mm long) 3.0 – 3.5 2.6 – 3.0
M3 3.0 – 3.5 2.6 – 3.0
NOTES
HP Pavilion zt1100/xz100 Omnibook xt1000 Removal and Replacement 2-3
Removing the Battery
(User-Replaceable)
Required Equipment
• None.
Removal Procedure
• Slide the battery’s release latch in the direction of the arrow on the latch, then lift the battery out of
its compartment.
Figure 2-2. Removing the Battery
Reassembly Notes
• Insert the front end of the battery into the battery compartment, then press the back end in until the
battery clicks into place.
2-4 Removal and Replacement HP Pavilion zt1100/xz100 Omnibook xt1000
Removing a Plug-In Module
(User-Replaceable)
Required Equipment
• None.
Removal Procedure
• Slide the module release latch in the direction shown by the arrow on the latch, and remove the
module.
Figure 2-3. Releasing the Plug-in Module
HP Pavilion zt1100/xz100 Omnibook xt1000 Removal and Replacement 2-5
Removing the Hard Disk Drive
(User-Replaceable)
Required Equipment
• #0 Phillips screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
2. On the bottom of the unit, remove both hard drive retaining screws.
Screws,
M2.5×4mm
Figure 2-4. Removing the Hard Disk Drive
3. Carefully pull the hard drive out of the notebook.
4. Remove all four screws from the hard drive tray and drive case, then lift the drive out of the tray.
2-6 Removal and Replacement HP Pavilion zt1100/xz100 Omnibook xt1000
Screws,
M2.5x4mm (2)
Screws,
M2.5x4mm (2)
Figure 2-5. Removing the Hard Disk Tray
Reassembly Notes
• Insert the connector end of the drive through the opening in the tray, then lower the drive into
place.
• Carefully slide the hard drive assembly into its compartment. Press firmly to make sure the
connector seats properly.
Important
If you are installing a new hard disk drive, install the factory software and operating system on the
drive before loading any additional software—see “Recovering and Reinstalling Software,” below.
HP Pavilion zt1100/xz100 Omnibook xt1000 Removal and Replacement 2-7
Recovering and Reinstalling Software
Use the Recovery CDs to reinstall the original factory software and operating system. The Recovery
CDs also provide all HP notebook–specific Windows drivers, which are available in the following
locations:
• On the hard drive, under c:\hp\drivers.
• On the Recovery CDs, under \hp\drivers.
• On the HP Business Support web site (www.hp.com/go/bizsupport). This web site contains the
latest updates of software drivers for various operating systems.
To recover the factory software installation
The following procedure describes how to recover the notebook’s original software and operating
system. This process can take up to 15 minutes to complete. (For more information about recovering
the factory software installation, see the file readme.txt in the root directory of the Recovery CDs.)
Caution
Be sure to back up the hard disk before proceeding. This procedure formats the hard disk, which
erases all data on the disk. After formatting, you must reinstall any applications.
Do not interrupt the following process or unplug the AC adapter until the process is complete.
1. Back up all data from the hard disk.
2. Connect the AC adapter to the notebook. This is necessary to provide an uninterrupted power source: the notebook’s battery alone is not adequate.
3. Insert Recovery CD disk 1 into the notebook’s CD/DVD drive. If the notebook is turned off, use a
pin or straightened paper clip to press the release switch on the drive door to open it.
4. Turn on or restart the notebook.
5. When the HP logo appears, press Esc to display the Boot menu.
6. Use the arrow keys to select the CD/DVD drive as the first boot device, then press Enter.
7. When the Recovery CD dialog box appears, follow the displayed instructions. If prompted, accept
the recommended partition size.
To create the Utility partition without installing the factory software, click Advanced and select not
to install the operating system.
If the hard disk is partitioned into several drives, you can install the factory software on drive C
without affecting other drives. Click Advanced and select to restore only the C partition.
8. When prompted to reboot the notebook, press Ctrl+Alt+Del and follow any instructions that
appear.
Note
Windows XP supports the NTFS file system.
2-8 Removal and Replacement HP Pavilion zt1100/xz100 Omnibook xt1000
Loading...
+ 74 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.