HP Omni Pro 110 Business PC Reference Guide

Illustrated Parts & Service Map

HP Omni Pro 110 All-in-One PC

contained herein is subject to change without notice . HP shall not be liable for technical or editorial errors or omissions cont ained h erein . Intel, Pent ium, Intel Inside, and the Intel logo are trademarks or registered trademarks of the Intel Corporation and its subsidiaries in the U. S. and other countries.

Document Number 654195-002. 2nd Edition October 2012.

Key Specifications

Processor Type Intel® Celeron Dual-Core, Intel Pentium Dual-Core, Intel

RAM Type PC3-10600 DDR3 1333-MHz non-ECC SDRAM Maximum RAM Sup-

ported Display • 20-inch diagonal

Graphics Adapter Integrated Intel Graphics Media Accelerator X4500 Chipset Intel G41 Express chipset Expansion Bays:

I/O Interfaces (6) USB 2.0 ports: (2) left slide , (4) rear; (1) RJ-45, (1) l eft

Operating Systems • Windows 7 Professional 32 & 64

Core™2 Duo

4 GB

• Resolution: 1600 x 900

• Contrast Ratio: 1000:1

• Image brightness: 250 nits

• Typical response time: 5ms

External: (1) 5.25- Slim Tray drive bay Internal: (1) 3.5-inch drive bay Slots: (1) Mini Socket Slot (Occupied)

side audio headphone, (1) left side microphone, (1) rear line out

• Windows 7 Home Basic 64

• Windows 7 Starter Edition 32

• RedFlag Linux

•FreeDOS

Standard and Optional Boards

System boards with thermal grease, alcohol pad, and CPU socket cover 1 System board 648965-001 2 Power button board 651585-001 3 Inverter board 651601-001 4 Webcam module 651586-001 5 WLAN module (802.11b/g/n) (1x1 mini card) 634906-001 Memory modules (PC3-10600) *2 GB *1 GB Intel Core2 Duo processors with thermal material: E8500, 6-MB cache, 3.16 GHz 466170-001 E8400, 6-MB cache, 3.00 GHz 509554-001 E7600, 3-MB cache, 3.06 GHz 573954-001 E7500, 3-MB cache, 2.93 GHz 586745-001 Intel Pentium processors with thermal material: E6800, 2-MB cache, 3.20 GHz, 1066-MHz FSB 631758-001 E6700, 2-MB cache, 3.20 GHz, 1066-MHz FSB 617840-001 E5800, 2-MB cache, 3.30 GHz, 800-MHz FSB 646376-001 E5700, 2-MB cache, 3.00 GHz, 800-MHz FSB 631759-001 E5500, 2-MB cache, 2.80 GHz, 800-MHz FSB 613035-001 Intel Celeron processor with thermal material: E3500, 1-MB cache, 2.70 GHz, 800-MHz FSB 633219-001

* Not shown

651609-001 651608-001

Spare Parts

Mass Storage Devices (not illustrated)

8X DVD±RW SuperMulti DL Drive with LightScribe 597927-001 Optical drive bracket (mounts on back of optical drive) 651600-001 Optical drive bezel 651599-001 1 TB hard drive 621418-001 750 GB hard drive 632938-001 500 GB hard drive 621421-001 320 GB hard drive 621420-001 250 GB hard drive 621419-001

Miscellaneous Parts

1 Display panel, 20-inch, non-glare 646794-001 2 Display bezel 704214-001 3 Heat sink (thermal module) 651607-001 4 Speaker, right 651597-001 4 Speaker, left 651598-001 5 Fan 651606-001 * Thermal pad, DIMM, 20mm x 50mm x 2.5mm (mount under PCA) 651595-001 * Thermal pad, VRM, 15mm x 40mm x 4mm (mount under PCA) 651596-001 * AC adapter, 150W, external 651587-001 * Mouse, USB, optical, Portia 621416-001

*Not shown

HP Omni Pro 110 AIO PC Illustrated Parts & Service Map 654195-002 page 1

Cables

1 WLAN antenna cable 651594-001 2 Inverter cable 651588-001 3 Optical drive cable 651590-001 4 LVDS cable 651589-001 5 Hard drive cable 651592-001 6 Power button/LED cable 651593-001 7 Webcam cable 651591-001

*Not shown

System Board

System Board Connectors and Jumpers (component location may vary)

MINI _CARD1 LVDS_UMA PROCESSOR BAT2 RTC battery socket CHANNELA

_DIMM0 CHANNELB

_DIMM0 1394A 1394 port SATA1 Optical drive connector USB2 USB connector SATA_ODD

USB1 USB connector MIC Microphone connector PWR_CON1 Power cable connector HP_OUT Headphone jack WEBCAM Webcam connector USB3-6 USB connectors INVERTER Inverter board connector LINE_OUT Headphone connector

Mini card connector (WLAN) Display connector DC JACK AC adapter connector CPU SPEAKER_L Left speaker connector

Memory socket 1 SATA_HDD

Memory socket 2 SATA0 Hard drive connector

LAN Network connector

SPEAKER_R

POWER

POWER SYSTEM FAN

Right speaker connector Hard drive power connec-

tor

Optical drive power connector

System fan connector

Computer Setup.

Computer Setup Menu

Heading Option / Description Main System Time Allows you to set system time.

System Date Allows you to set system date. System IDs (view only) Lists product name, serial number

Language Allows you to select the language. Floppy Diskette A Specifies capacity and physical size, if installed. 1st Drive

2nd Drive

System Information Allows you to view installed memory, memory

Advanced CPU Type View only.

CPU Speed View only. Cache RAM View only. Supervisor Pass-

word User Password All ows you to vie w the user password. Onboard LAN Disable/enable onboard LAN controller. Onboard WLAN Disable/enable onboard WLAN controller. Onboard LAN Boot

ROM Onboard 1394 Allows you to enable/disable all 1394 ports. Primary Video

Adapter

SATA Controller Allows you to disable/enable the SATA controller. SATA Controller

Mode Onboard Audio Auto/disable/enable. USB Ports Allows you to individually enable/disable available

Change Supervisor Password

Power After AC Pow e r

Boot Boot-time Diagnos-

Exit Exit Saving

Failure XD (Execute Dis-

able) Virtualization Tech-

nology WOL from S5 Allows you to enable/disable Limited (normal shut-

tic Screen ESC: Boot Menu Enables/disables the ability to press the Esc key to

F9: Diagnostics Enables/disables the ability to press the F9 key to

F10: Setup Enables/disables the ability to press the F10 key to

F11: Recovery Enables/disables the ability to press the F11 key to

F12: Boot from LAN Enables/disables the ability to press the F12 key to

Boot Device Priority: 1st Boot Device, 2nd Boot Device, 3rd Boot Device, 4th Boot Device

Floppy Group Boot Priority

CD-ROM Boot Priority

Hard Drive Boot Priority

Network Group Boot Priority

Changes Exit Discarding

Changes Load Setup

Defaults Discard Changes Press Enter to discard changes. Save Changes Press Enter to save changes.

UUID, SKU number, family name, feature byte, build ID.

Allow you to: enable/disable port configuration, view capacity (HDD only), view transfer mode. Also allows you to run HDD self-test for selected channel: SMART status check, SMART short self test, SMART extended self test.

banks 1-2, BIOS revision, core version.

Allows you to view the supervisor password.

Disable/enable the boot ROM of the onboard LAN chip.

Allows you to select boot display device when more than 2 video options are offered by system: Integrated (onboard), PCIe.

If SATA controller is enabled, allows you to set the mode to: IDE, AHCI.

USB ports. Allows you to change the supervisor password.

Allows you to select system restart behavior after power loss: Stay off, Power on, Auto.

Disable/enable XD bit.

Disable/enable.

down) WOL from S5 support. Disable/enable POST diagnostic messages dis-

play.

access the boot menu during boot.

access the Diagnostics menu during boot.

access the Setup menu during boot.

access the recovery menu during boot.

boot from LAN. Allows you to specify which device groups will boot

first, second, third, and fourth or to disable any of the four: Floppy group, CD-ROM group, Hard drive group, Network boot group. MS-DOS drive lettering assignments maybe apply after a non-MSDOS operating system has started.

Specifies boot device priority within removable devices.

Specifies boot device priority within CD/DVD drives.

Specifies boot device priority within hard drives.

Specifies boot device priority within bootable network devices.

Press Enter to exit saving changes.

Press Enter to exit discarding changes.

Press Enter to load setup defaults.

HP Omni Pro 110 AIO PC Illustrated Parts & Service Map 654195-002 page 2