HP Omni 220-1025, Omni 220-1050xt, Omni 220-1080qd, Omni 220-1100t, Omni 220-1125 Quick Setup Guide

...
12” (30cm)
12” (30cm)
http://www.hp.com/go/contactHP
http://welcome.hp.com/country/us/en/wwcontact_us.html
© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.
The only warranties for Hewlett-Packard products and services are set forth in the express statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
HP assumes no responsibility for the use or reliability of its software on equipment that is not furnished by HP.
This document contains proprietary information that is protected by copyright. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of HP.
Hewlett-Packard Company
P.O. Box 4010
Cupertino, CA 95015-4010
USA
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
Microsoft and Windows are trademarks of Microsoft Corporation in the U.S. and other countries.
HP supports lawful use of technology and does not endorse or encourage the use of our products for purposes other than those permitted by copyright law.
The information in this document is subject to change without notice.
Warranty Print on Demand Statement
You can find the expressly provided HP Limited Warranty applicable to your product in the start menu on your PC and/or in the CD/DVD provided in the box. For some countries/regions, a printed HP Limited Warranty is provided in the box. In countries/regions where the warranty is not provided in printed format, you may request a printed copy from
hp.com/go/orderdocuments or write to HP at: Hewlett-Packard, MS POD, 11311 Chinden Blvd., Boise, ID 83714, U.S.A.; Hewlett Packard, POD, P.O. Box 200, Alexandra Post Office, Singapore 911507. Please include your product name, warranty period, name, and postal address.
1 Getting information
Type of information Where to find
Set up your computer. Quick Setup (this Guide)
Use the computer.
Connect to the Internet.
Recover factory settings. Troubleshooting and Maintenance Guide on your computer. At the bottom
See how-to videos about using
the features of your computer.
Learn how to use the Microsoft
Windows 7 operating system.
Find Windows 7 password
information.
Find links to driver updates.
Read frequently asked
questions.
Troubleshoot the most common
computer hardware and software issues.
Find electronic user guides
and specifications for your computer model.
Order parts and find
additional troubleshooting help.
Quick Setup (this Guide)
of your screen, click on Start, then click HP Help and Support and HP User Manuals.
http://www.hp.com/supportvideos (English only)
Visit
Help and Support
Click Start, and then click Help and Support or visit http://www.hp.com/go/win7.
Windows 7 troubleshooting tools
1. Click Start, click Control Panel, and then click System and Security.
2. Under Action Center, click Find and fix problems (troubleshooting).
Troubleshooting and Maintenance Guide on your computer. At the bottom of your screen, click on Start, then click HP Help and Support and HP User Manuals.
HP Support website:
http://www.hp.com/go/contactHP
Upgrade or replace
components of your computer.
Upgrading and Servicing Guide
HP Support website:
http://www.hp.com/go/contactHP
1
Type of information Where to find
Find computer warranty
information.
Get technical support.
Get up-to-date information and
help from the Windows community.
Connect to a TV. Watching and Recording TV
Get special utilities for
computer owners.
Maintain your computer. HP Support Assistant — Maintains your computer performance and resolve
Limited Warranty and Support Guide or the Warranty and Support Information included with your computer.
Or
Click Start, click All Programs, and then click HP User Manuals.
http://www.hp.com/support/consumer-forum
Click Start, click All Programs, and then click HP User Manuals.
If the guide is not available there, visit
PC Help & Tools folder
Click Start, click All Programs, and then click PC Help & Tools.
problems faster by using automated updates, on-board diagnostics, and guided assistance.
Click Start, click All Programs, click HP, and then click HP Support Assistant.
Troubleshooting and Maintenance Guide
Click Start, click HP Help and Support, and then click HP User Manuals.
Maintaining Your Computer (this Guide)
http://www.hp.com/go/contactHP
Find safety and regulatory
notices.
Find ergonomic information. Safety & Comfort Guide
Safety & Regulatory Information
Click Start, click HP Help and Support, and then click HP User Manuals or visit
Click Start, click HP Help and Support, and then click HP User Manuals or visit
2 Chapter 1 Getting information
http://www.hp.com/go/contactHP.
http://www.hp.com/ergo.
2 Setting up your computer
WARNING! To reduce the risk of electrical shock or damage to your
equipment:
• Place the computer in a location away from water, dust, moisture, and soot. These can increase the inside temperature, or can cause fire or electrocution.
• Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
• Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.
• Disconnect power from the equipment by unplugging the power cord from the electrical outlet. To prevent direct exposure to laser beam, do not try to open the enclosure of the CD or DVD drives.
• The power supply is preset for the country/region in which you purchased your computer. If you move, check the voltage requirements for your new location before plugging the computer into an AC power outlet.
The computer may be heavy; be sure to use ergonomically correct lifting procedures when moving the computer.
To reduce the risk of serious injury read the Safety & Comfort Guide. The guide is located on the web at
1. Place the computer so that all ventilation openings are unobstructed and
cabling is not in a walkway or where it can be stepped on or damaged by placing furniture on it.
2. Connect all power cords from the monitor, computer, and accessories to a
power surge protection device that is specifically labeled as having surge protection, an uninterruptible power supply (UPS), or a similar device. If the computer has a television tuner, or a modem or telephone connection, protect the computer by using surge protection with these signal inputs as well. Connect the television cable or the telephone line cord to the surge protection device, and then connect the device to the computer.
3. Download and install operating system updates. a. Find out what operating system and version your computer is currently
running. (Click Start > Control Panel and double-click System. The operating
system and version are shown under Windows edition.)
b. Open your internet browser and go to
contactHP.
c. Select your country and language, if necessary, and click Support &
Drivers.
http://www.hp.com/ergo.
http://www.hp.com/go/
3
d. Select Download drivers and software (and firmware), type
your computer model name and number in the product field, and press Enter.
e. If necessary, select your computer model from Product search
results. f. Select your computer operating system. g. Click Download next to each update you wish to download. h. Follow the on-screen instructions to install each downloaded update.
4. Look in the computer box for additional printed details or updates.
5. Read the Safety and Regulatory Information document in the HP User Manuals
folder.
6. Read the Safety & Comfort Guide for proper workstation setup, posture,
health and work habits, and electrical and mechanical safety information. Click Start, click All Programs, and then click HP User Manuals or visit http://www.hp.com/ergo.
After you complete the initial computer setup, you might want to install additional software programs or hardware devices. Check the operating system, memory, and other requirements listed before purchasing new software or hardware for your computer. Follow the software manufacturer's directions to install the new software.
NOTE: Use only licensed original software. Installing copied software could result in an unstable installation, infect the computer with a virus, or be illegal.
Security solutions can deter theft, mishandling, and software attacks, but cannot prevent them.
Connecting to the Internet
Steps to connect to the Internet:
1. Connect the hardware as shown on the setup view.
2. Get Internet service.
Sign up with an Internet Service Provider (ISP). If you already have an
account with an ISP, skip this step and follow the instructions provided
by the ISP.
If you did not set up the computer for Internet service during the initial
setup, do so now by using Online Services:
a. Click Start, click All Programs, click Online Services, and
then click Get Online.
b. Follow the on-screen instructions to select an ISP and set up Internet
service.
4 Chapter 2 Setting up your computer
NOTE: Online Services provides a list of ISPs; however, you might choose another ISP or transfer an existing account to this computer. To transfer existing accounts, follow the instructions provided by the ISP.
3. Using your Internet connection through your ISP, open a web browser and
browse the Internet.
NOTE: If you have issues connecting to the Internet, see Internet access on page 14.
Connecting to the Internet
5
3 Setting up additional features
Using Beats Audio™ (select models only)
Your HP TouchSmart PC features audio connectors (headphone and Audio Out ) that are optimized for Beats Audio™ headphones and external audio systems (purchased separately). Select HP TouchSmart PC models also include four Beats­optimized internal speakers and a Beats toggle button
Your computer comes ready for you to experience music with Beats enabled. To disable Beats, press the Beats toggle button; the Beats-off icon appears on the screen. To turn Beats on, press the Beats toggle button again. If your keyboard does not contain the Beats toggle button, press Fn+B to enable and disable Beats. Tap the Beats icon on the system tray to view the Beats user interface.
All you need to do is plug the Beats Audio headphones into the side headphone connector to experience crisp and clear sound separation. To experience the full capability of BEATS audio using the internal speakers, HP recommends connecting a matching HP subwoofer to the Sub connector on the back panel. If you are using an external audio system, plug it into the Audio Out connector on the back panel.
Using the HDMI port controls (select models only)
The right side of your computer may contain an HDMI port and volume control buttons. Unless a device is plugged into the HDMI port, the volume controls have no functionality. The HDMI controls are only intended to control the settings of the device plugged into that port, and do not control any other media devices on the system.
To use the HDMI port controls, plug a device into the HDMI port. Press the menu button (the top button displayed). A new on-screen menu displays. Using the +/­buttons, select brightness, volume, contrast, or color balance.
on the keyboard.
When a device is plugged into the HDMI port, the volume on the computer is muted. Pressing the +/- buttons on the side panel does not change the volume of the computer.
6 Chapter 3 Setting up additional features
4 Maintaining your computer
Cleaning procedures
Keeping your computer system free of dust, dirt, and heat will prolong its life.
Dust, pet hair, and other particles can build up, creating a blanket effect; as a result, components can
overheat or, in the case of the keyboard and mouse, not work smoothly and effectively.
Check your system once a month for visible signs of dust and debris, and clean it about once every three
months.
www.hp.com/go/contactHP for additional cleaning instructions.
Visit
Cleaning the computer vents
Air vents keep the computer cool. Keep these vents clean by using a small, battery­powered vacuum cleaner. (A battery-powered vacuum cleaner eliminates the risk of electric shock.)
1. Vacuum the vents on the computer case.
2. Remove any debris that has accumulated in and around the computer
connectors (for example, the Ethernet and USB connectors).
Cleaning procedures
7
Cleaning the keyboard and mouse
When cleaning the keyboard keys, use a low setting on a battery-powered vacuum cleaner, to avoid removing key caps and springs.
1. Vacuum between the keys of the keyboard and along the grooves.
2. Use a clean, dry cloth and isopropyl (rubbing) alcohol to clean buildup on the
keyboard keys and along its edges.
3. Wipe the body of the mouse and the mouse cord by using cleaning wipes.
If you have a roller-ball mouse, clean the ball and rollers inside:
1. Turn the mouse upside down, and rotate the ball-cover ring counterclockwise
to remove the ring and release the roller ball.
2. Rinse the roller ball with soap and warm water.
3. Clean the rollers inside the mouse with a cotton swab dampened with
isopropyl (rubbing) alcohol.
4. After the roller ball and rollers are completely dry, replace the ball and ball-
cover ring.
Cleaning the touch screen (AiO models only)
Follow these steps to clean the touch screen:
1. Turn off the computer. Tap the Start button, and then tap Shut Down.
2. Disconnect the power cord from the wall.
3. Spray a small amount of mild glass cleaner on a soft cloth to clean the touch
screen.
4. Wipe the surface and left and right side of the touch screen to remove any
dirt, fingerprints, or other debris that could hinder the touch recognition of the screen.
CAUTION:
cleaner into the cloth, and then wipe the sides and surface of the touch screen.
Do not use an abrasive cleaner or cloth when cleaning the sides or the surface of the screen, because this could cause damage to the touch screen.
Do not spray or place the cleaner directly on the screen; spray the
8 Chapter 4 Maintaining your computer
5 Troubleshooting
Refer to the documentation provided by the product manufacturer for information about peripheral-specific problems, such as issues with a monitor or a printer. The following tables present some issues you might encounter while installing, starting up, or using your computer and possible solutions.
For more information or for additional troubleshooting options, see information on page 1.
Computer does not start
Symptom Possible solution
Getting
Error message: Hard disk drive error.
Computer will not turn on or start.
Restart the computer.
1. Press the Ctrl+Alt+Delete keys on the keyboard simultaneously.
2. Click the Arrow button next to the red Shut Down button, and then click Restart.
Or, press and hold the Power button on the computer for 5 or more seconds to turn off the computer, and then press the Power button to restart the computer.
3. If Windows opens, immediately back up all important data to a backup hard disk drive.
4. Contact Support, whether it was possible or not to start up Windows.
Either the hard disk drive or the system board may need to be replaced.
Ensure that the cables connecting the computer to the external power source are plugged in
properly. When the cables connecting the computer to the external power source are plugged
in properly, and the wall outlet is functioning, the green power supply light on the back of the
computer should be on; if it is not, contact Support.
Test the wall outlet by connecting a different electrical device to it.
Computer does not start
9
Symptom Possible solution
Computer seems to be locked up and is not responding.
Error message: Invalid system disk or Non­System disk or Disk error.
Use the Windows Task Manager to close any programs not responding, or restart the computer:
1. Press the Ctrl+Alt+Delete keys on the keyboard simultaneously.
2. Click Start Task Manager.
3. Select the program that is not responding, and then click End Task.
If closing programs does not work, restart the computer:
1. Press the Ctrl+Alt+Delete keys on the keyboard simultaneously.
2. Click the Arrow button next to the red Shut Down button, and then click Restart.
Or, press and hold the Power button on the computer for 5 or more seconds to turn off the computer, and then press the Power button to restart the computer.
When drive activity stops, remove the disc and press the spacebar on the keyboard. The computer should start up.
10 Chapter 5 Troubleshooting
Power
Symptom Possible solution
Computer does not turn off when the Power button is pressed.
Computer shuts down automatically.
Press and hold the Power button until the computer turns off. Check Power Settings.
The computer might be in an exceedingly hot environment. Let it cool down.
Ensure that computer air vents are not blocked and that the internal fan is running — see :
Cleaning procedures on page 7. (Your computer might not have an internal fan.)
Display (monitor)
Symptom Possible solution
Screen is blank. Press the space bar on the keyboard or move the mouse to make the screen display visible
again.
Press the Sleep button (select models only), or Esc on the keyboard, to resume from Sleep mode.
Press the Power button to turn on the computer.
Power
11
Keyboard and mouse (general)
Symptom Possible solution
Keyboard commands and typing are not recognized by the computer.
Mouse (with cable) does not work or is not detected.
Cursor does not move using the arrow keys on the number keypad.
Cursor does not respond to mouse movement.
Use the mouse to turn off the computer, unplug and reconnect the keyboard to the back of your computer, and then restart your computer.
Unplug and reconnect the mouse cable to your computer.
If the mouse is still not detected, turn off the computer, unplug and reconnect the mouse cable, and then restart the computer.
Press Num Lock on the keyboard to turn off Num Lock, so that the arrow keys on the number keypad can be used.
Use the keyboard to save changes in all open programs, and then restart your computer:
1. Press the Alt+Tab keys simultaneously to navigate to an open program.
2. Press Ctrl+S simultaneously to save your changes in the selected program (Ctrl+S is
the keyboard shortcut for Save on most—not all—programs).
3. Repeat step 1 and step 2 to save changes in all open programs.
4. After saving changes in all open programs, press the Ctrl+Esc keys on the keyboard
simultaneously to display the Windows Start menu.
5. Use the arrow keys to select the Arrow button that is next to Shut Down. Select Shut Down, and then press Enter.
6. After the shutdown is complete, unplug and reconnect the mouse connector to the
back of your computer, and then restart your computer.
12 Chapter 5 Troubleshooting
Keyboard and mouse (wireless)
A
Symptom Possible solution
Wireless keyboard or mouse does not work or is not detected.
Ensure that you are using the wireless keyboard or wireless mouse within range of the
receiver, approximately 3 met inche
s) during initial setup or for re-synchronization.
Ensure that the mouse is not in Suspend mode, which occurs after 20 minutes of
ers (10 feet) for normal use, and within 30 cm (12
inactivity. Click the left mouse button to reactivate it.
Replace the batteries in the keyboard and mouse.
Re-synchronize the keyboard and mouse to the receiver using the following steps.
The receiver, wireless keyboard, and wireless mouse shown in the following illustrations are examples; your models might vary. IMPORTANT: During these steps, place the wireless keyboard and wireless mouse on the same level as the receiver, within 30 cm (12 inches) of the receiver, and away from interference from other devices.
1. Unplug the receiver from a USB connector on the computer, and then reconnect it.
Your computer model might have a connector dedicated to the receiver. If you have a choice, use a USB connector on the front of the computer.
2. Check that the mouse is on (A), and push and hold the Connect button (B) on the
underside of the mouse for 5 to 10 seconds until the LED on the receiver lights or stops flashing. The receiver connection session times out after 60 seconds. To ensure that the connection was established, and that the receiver did not time out instead, move the mouse and check for response on the screen.
B
Off
Connect
On
3. After the mouse connection is established, continue by using the steps that follow to
repeat the procedure for the keyboard.
4. Push and hold the Connect button (C) on the underside of the keyboard for 5 to 10
seconds until the LED on the receiver lights or stops flashing.
C
Keyboard and mouse (wireless)
13
Speakers and sound
Symptom Possible solution
No sound is produced.
Volume is very low or unsatisfactory.
For Windows 7:
1. Click Start, click Control Panel, click Action Center, and then click
2. Under Hardware and Sound, click Troubleshoot and audio playback.
If you are using built-in monitor speakers, use the monitor front-panel Volume button to adjust volume. Use the front-panel buttons to enter the on-screen display (OSD) and ensure that audio is enabled and that the volume is set appropriately.
Ensure that you connected powered (active) speakers and that they are turned on.
Turn off your computer, and then unplug and reconnect the speakers. Ensure that the speakers are connected to an audio connector, not a Line In or headphone connector.
To resume from Sleep mode, press the Sleep button (select models only), or press Esc.
Unplug headphones if they are connected to your computer (or speaker system).
Ensure that you connected the speakers to the Audio Out (lime green) connector on the back of the computer. (Additional audio connectors are used for multiple-channel speakers.) Detached non-powered speakers (speakers without a separate power source, such as batteries or a power cord) do not produce satisfactory sound. Replace the non­powered speakers with powered speakers.
Internet access
Troubleshooting.
Symptom Possible solution
Internet programs do not start automatically.
Log in to your ISP, and start the desired program.
14 Chapter 5 Troubleshooting
Symptom Possible solution
I cannot connect to the Internet.
For Windows 7:
1. Click Start, click Control Panel, click Action Center, and then click Troubleshooting.
2. Under Network and Internet, click Connect to the Internet.
Verify that you are using the proper cables for your Internet connection type. Your computer might have a dial-up modem and an Ethernet network adapter (also called a network interface card, or NIC). A modem uses a standard telephone cable, whereas the network adapter uses a network cable, to connect to a local area network (LAN). Do not connect a telephone cable to the network adapter, and do not plug a network cable into a telephone service line; doing so might damage the network adapter.
Run the wireless setup wizard:
1. Click Start, click Control Panel, click Network and Internet, and then click Network and Sharing Center.
2. In the Network and Sharing Center window, click Set up a connection or network to open the wizard, and then follow the on-screen instructions.
If your system has an external antenna, try to move the antenna to a better position. If the antenna is internal, try to move the computer.
Try to connect again later, or contact your Internet service provider (ISP) for assistance.
Software troubleshooting
To repair software problems, try these methods:
Turn the computer off completely and then turn it on again. This is the easiest (and
sometimes the best) way.
Update the drivers (see Updating device drivers, following).
Use Microsoft System Restore Software program and hardware driver reinstallation (see
Microsoft System Restore, later in this table). — Restores your computer to a configuration that was in use before the software was installed.
Reinstall the software program or hardware driver (see Software program and hardware
driver reinstallation, later in this table). — Restores the software (if it came with the product) or hardware driver to factory defaults.
System Recovery (see Troubleshooting and Maintenance Guide on your computer. At the
bottom of your screen, click on Start, then click HP Help and Support and HP User Manuals. ) — Erase and reformat the hard disk drive, and then reinstall the operating
system, programs, and drivers. This erases all data files you have created.
Software troubleshooting
15
Updating device drivers
Complete the following procedure to update a driver, or to revert to an earlier version of the driver if the new one does not solve your problem:
1. Click Start.
2. Type Device Manager into the Start Search box, and then click Device Manager to open the Device Manager window.
3. Click the plus sign (+) to expand the type of device you want to update or rollback. (For
example, DVD/CD-ROM drives).
4. Double-click the specific item (for example, HP DVD Writer 640b).
5. Click the Driver tab.
6. To update a driver, click Update Driver, and then follow the on-screen instructions.
Or, to revert to an earlier version of a driver, click Rollback Driver, and then follow the on-screen instructions.
Microsoft System Restore
If you have a problem that might be due to software that was installed on your computer, use System Restore to return the computer to a previous restore point. You can also set restore points manually.
NOTE:
program.
To start a System Restore:
1. Close all open programs.
2. Click Start, right-click Computer, and then click Properties.
3. Click System protection, System Restore, click Next, and then follow the on-
To add restore points manually:
1. Close all open programs.
2. Click Start, right-click Computer, click Properties, and then click System
3. Under Protection Settings, select the disk for which you want to create a restore point.
4. Click Create, and then follow the on-screen instructions.
Always use this System Restore procedure before you use the System Recovery
screen instructions.
protection.
16 Chapter 5 Troubleshooting
Software program and hardware driver reinstallation
If any of your factory-installed software programs or hardware drivers are damaged, you can reinstall it by using the Recovery Manager program (select models only).
NOTE:
on CDs or DVDs included in the computer box. Reinstall these programs directly from the CDs or DVDs.
Before you uninstall a program, be sure you have a way to reinstall it. Check to be sure that it is still available from where you initially installed it (for example, discs or the Internet). Or check to be sure that the program is in the list of programs you can reinstall from the Recovery Manager.
To check the list of installable programs in the Recovery Manager:
1. Click Start, All Programs, Recovery Manager, and then click Recovery
2. Under I need help immediately, click Software Program Reinstallation.
3. Click Next at the Welcome screen. A list of programs opens. Check whether your
To reinstall a program using the Recovery Manager:
1. Click Start, click All Programs, click Recovery Manager. and then click Recovery
2. Click Software Program Reinstallation, and then click Next at the Welcome
3. Choose the program you want to install, click Next, and follow the on-screen
4. When you have finished reinstalling, restart the computer. Do not skip this last step.
Do not use the Recovery Manager program to reinstall software programs that came
Manager. If prompted, click Yes to allow the program to continue.
program is there.
Manager.
screen.
instructions.
You must restart the computer after recovering software programs or hardware drivers.
To uninstall a program:
1. Close all software programs and folders.
2. Click Start, and then click Control Panel.
3. Under Programs, click Uninstall a program.
4. Select the program you want to remove, and then click Uninstall.
Software troubleshooting
17
6 Support information
Ways to get help
Easy to reach. Easy to use. Award-winning HP Customer Support is our promise to help you get the most from your computer. Whether with tools located on your computer, from information on the web, by phone, or through your local retailer, you’ll find what you need.
Before contacting the HP Customer Care Center, it’s important to have the following information handy.
Model number
System (product) number
Serial number
Software build number
Operating system
Purchase date
Please take a moment to write down your product information for future reference. The first four items on the list (model number, product number, serial number, and
software build number) can be viewed by pressing the Ctrl+Alt+S keys on the keyboard at the same time.
Don’t forget to register!
http://www.hp.com/apac/register.
Go to:
Where to get help
1. Use the Help and Support Center for help with hardware and software
questions. Click Start, and then click Help and Support. The Help and Support Center provides useful troubleshooting information and includes the following:
E-mail support
HP Real Time Chat with qualified support specialists
Support phone numbers
2. If you think you have a hardware issue, before calling the Customer Care
Center, run the hardware diagnostic tools that are preinstalled on your computer. Click Start, All Programs, PC Help & Tools, and then click
Hardware Diagnostic Tools.
3. For help online, go to the HP Customer Care Center website at
http://www.hp.com/go/contactHP.
18 Chapter 6 Support information
Phone assistance to get you up and running is covered for thirty (30) days from the time you purchased your computer. After thirty (30) days, there may be a charge, but the helpful support is still available.
Customer support for repairs
If your computer needs to be repaired or to have parts replaced, you have two choices:
You can easily replace many of your computer parts that are considered
consumer replaceable. This is the fastest method of repair, as many times we can send the part directly to your home or business in a few days.
If a repair is necessary, the HP Customer Care Center will make
arrangements to fix your computer. These services are covered during the warranty period. There are a few limitations and exclusions to the warranty (as well as some
important details), which are described in the Hardware Limited Warranty section of the Limited Warranty and Support Guide.
Before upgrading your hardware
Any hardware upgrades that you intend to do should only be done after you have completely set up your new computer. Refer to the setup poster included with your system for help with setting up. If you have any problems setting up your system and turning it on, immediately contact the HP Customer Care Center listed earlier in this guide, and a HP Customer Representative will assist you. This must be done first before attempting to upgrade your system.
By breaking the security seal on the back of the computer, you are confirming that the computer was working properly before you attempted to upgrade your system. Once the security seal has been broken, your computer is then, to the extent allowed by local law, covered under the terms and conditions listed in the Hardware Limited Warranty section of the Limited Warranty and Support Guide.
Customer support for repairs
19
The power to make a change
Thank you for your purchase. HP is dedicated to producing the highest quality, best performing, and easiest to
How you can help
Recycle your old computer.
Disposing of electronic waste responsibly has been an HP priority for more than 20 years. If this computer is a replacement for an older computer you no longer need, go to www.hp.com/go/recycle to find out if HP can help you dispose of your old computer with minimum impact on the planet.
Don't use a screen saver.
Screen savers can prevent your HP computer from going to sleep and thereby waste power. Screen savers can also reduce the life of your monitor by increasing the number of hours the LCD backlight is on.
Don't disable the power settings.
The power management tools on this computer are set to minimize energy use without impacting performance. Please do not disable them.
use computers in the world. HP also designed this product with the environment in mind.
But to reduce its impact even further, we need your help.
Let’s work together to make a change.
What we do
We design with the environment in mind.
While we want you to enjoy this computer for many years to come, we recognize that you will eventually dispose of it. We have designed it so it can be easily dismantled and recycled as much as possible. The packaging that came with your computer is also designed for maximum recyclability.
We design to be more energy efficient.
This computer has HP Power Management Technology, which can reduce computer energy use up to 45% compared to computers without power management. HP computers keep energy needs to a minimum, saving you money and reducing your carbon footprint.
We design our products to use better and fewer materials.
Ensuring the health of you, your family, and our planet is a key priority at HP. We are committed to using the safest materials in the production of this and all our other products.
Printed in
*673963-002*
673963-002
Loading...