HP NC364T User Manual

HP NC364T PCI Express Quad Port Gigabit
Server Adapter User Guide
Part Number 445893-00B
une 2007 (First Edition)
© Copyright 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Audience assumptions
This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels.

Contents

Technician notes........................................................................................................................... 4
Where to go for additional help.................................................................................................................. 5
HP contact information..................................................................................................................... 5
Introduction.................................................................................................................................. 6
Overview ................................................................................................................................................. 6
UTP CAT5 cable ....................................................................................................................................... 6
LED indicators........................................................................................................................................... 6
Installing an adapter ..................................................................................................................... 8
Installation overview .................................................................................................................................. 8
Preventing electrostatic discharge................................................................................................................ 8
Installing a low profile bracket .................................................................................................................... 9
Installing an adapter in a server .................................................................................................................. 9
Connecting the network cable................................................................................................................... 10
Specifications............................................................................................................................. 11
HP NC364T PCI Express Quad Port Gigabit Server Adapter specifications..................................................... 11
UTP cable specifications........................................................................................................................... 12
Regulatory compliance notices ..................................................................................................... 13
Regulatory compliance identification numbers............................................................................................. 13
Federal Communications Commission notice............................................................................................... 13
Class B equipment................................................................................................................................... 13
Declaration of conformity for products marked with the FCC logo, United States only....................................... 14
Modifications.......................................................................................................................................... 14
Canadian notice ..................................................................................................................................... 14
European Union regulatory notice .............................................................................................................15
Japanese class B notice............................................................................................................................ 15
Korean class B notice............................................................................................................................... 15
BSMI notice............................................................................................................................................ 16
Disposal of waste equipment by users in private households in the European Union......................................... 16
Electrostatic discharge................................................................................................................. 17
Preventing electrostatic discharge.............................................................................................................. 17
Grounding methods to prevent electrostatic discharge.................................................................................. 17
Acronyms and abbreviations........................................................................................................ 18
Index......................................................................................................................................... 20
Contents 3

Technician notes

In this section
Where to go for additional help ................................................................................................................ 5
WARNING: Only authorized technicians trained by HP should attempt to repair this
equipment. All troubleshooting and repair procedures are detailed to allow only subassembly/module-level repair. Because of the complexity of the individual boards and subassemblies, no one should attempt to make repairs at the component level or to make modifications to any printed wiring board. Improper repairs can create a safety hazard.
WARNING: To reduce the risk of electric shock, personal injury, and damage to the
equipment:
Do not attempt to service any parts of the equipment other than those specified in the
following procedure. Any other activities may require that you shut down the server and remove the power cord.
Installation and maintenance of this product must be performed by individuals who are
knowledgeable about the procedures, precautions and hazards associated with the product.
WARNING: To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
Unplug the power cord from the power supply to disconnect power to the equipment.
Do not route the power cord where it can be walked on or pinched by items placed against
it. Pay particular attention to the plug, electrical outlet, and the point where the cord extends from the server.
CAUTION: To properly ventilate the system, you must provide at least 7.6 cm (3.0 in) of
clearance at the front and back of the server.
CAUTION: The server is designed to be electrically grounded (earthed). To ensure proper
operation, plug the AC power cord into a properly grounded AC outlet only.
NOTE: Any indications of component replacement or printed wiring board modifications may
void any warranty.
Technician notes 4

Where to go for additional help

1. Go to the HP website (http://www.hp.com).
2. Click Software & Driver Downloads from the left menu bar.
3. Type the product name in the For product box and press Enter. For example, type NC370T.
4. Download the drivers, firmware, or documentation as needed.

HP contact information

For the name of the nearest HP authorized reseller:
In the United States, see the HP US service locator webpage (http://www.hp.com/service_locator).
In other locations, see the Contact HP worldwide (in English) webpage
(http://welcome.hp.com/country/us/en/wwcontact.html
For HP technical support:
In the United States, for contact options see the Contact HP United States webpage
(http://welcome.hp.com/country/us/en/contact_us.html
o Call 1-800-HP-INVENT (1-800-474-6836). This service is available 24 hours a day, 7 days a
week. For continuous quality improvement, calls may be recorded or monitored.
o If you have purchased a Care Pack (service upgrade), call 1-800-633-3600. For more
information about Care Packs, refer to the HP website (http://www.hp.com
In other locations, see the Contact HP worldwide (in English) webpage
(http://welcome.hp.com/country/us/en/wwcontact.html
).
). To contact HP by phone:
).
).
Technician notes 5

Introduction

In this section
Overview ................................................................................................................................................ 6
UTP CAT5 cable ...................................................................................................................................... 6
LED indicators.......................................................................................................................................... 6

Overview

The HP NC364T PCI Express Quad Port Gigabit Server Adapter is a high-performance, low-profile, Quad-Port PCI Express Ethernet adapter that delivers up to 1000 Mb/s Ethernet over twisted-pair (copper) category 5 or better cabling. It is powered by an Intel 82571EB chipset. The NC364T adapter, which ships with a standard-height chassis bracket and also includes a low-profile chassis bracket, has a fully integrated controller capable of auto-negotiating a link at 10, 100, or 1000 Mb/s. Network connection is made through the four RJ-45 connectors. LED indicators show the link speed and activity. See LED indicators (on page 6) for details. The adapter is a supported option for selected HP ProLiant servers. The adapter must be installed in a PCI Express slot.
For the latest functionality, features, and operating system support for this adapter, see the HP website (http://h18004.www1.hp.com/products/servers/networking/index-nic.html

UTP CAT5 cable

The NC364T adapter can use existing UTP CAT5 (or better) cable to deliver Gigabit Ethernet over copper, according to the IEEE 802.3ab specifications. For new installations, CAT5e (enhanced CAT5) cable is recommended.
For troubleshooting and other information about cabling, see UTP Cable Specifications (on page 12).

LED indicators

The NC364T adapter has four auto-negotiating 10/100/1000 RJ-45 ports. LED indicators show activity, link and port speed. Standard-height and low-profile brackets are shown below with RJ-45 ports and LED indicators.
).
Introduction 6
Loading...
+ 14 hidden pages