How it Works
HP
Loading...
mt22
QuickSpecs
27 pgs568.03 Kb0

HP mt22 QuickSpecs

Download
QuickSpecs
HP mt22 Mobile Thin Client
Overview
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 1
Left
1.
Internal Microphones (2)
7.
SD card reader
2.
Webcam
8.
Thermal Vent
3.
Privacy Shutter (Selective model only)
9.
USB 2.0 Port
4.
Webcam LED
10.
Standard Security Lock Slot (Lock sold separately)
5.
Clickpad1
11.
Power Button
6.
Hard Drive LED
1Clickpad gesture support is limited on HP ThinPro/HP Smart Zero, and functionality is dependent upon application being used.
QuickSpecs
HP mt22 Mobile Thin Client
Overview
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 2
Right
1.
Power Connector
5.
USB 3.1 Gen 1 Port
2.
USB Type-C™ 3.1 Gen 1 Port
6.
USB 3.1 Gen 1 Port
3.
Ethernet Port (RJ-45)
7.
Headphone/Microphone Combo Jack
4.
HDMI Port (Cable not included)
8.
HP Fingerprint Sensor1
1
Fingerprint Reader is an optional feature that requires Windows 10 IoT and must be configured at purchase.
QuickSpecs
HP mt22 Mobile Thin Client
Overview
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 3
• Preinstall Windows 10 IoT Enterprise, HP ThinPro
1
/HP Smart Zero
• 10th generation Intel® Celeron™ 5205U processor
• Your choice of display: 35.56 cm (14.0") diagonal HD, Ultra-Wide Viewing Angle FHD, and Touch
5,6
or Non-Touch screen
• Integrated Intel® UHD Graphics 620
• Enhanced security features including TPM 2.0
7
, HP Sure Start Gen5, HP BIOSphere, Hardware enforced Firmware
Protection, privacy webcam shutter and optional Fingerprint sensor8
• Passed 19 MIL-STD 810 G testing
2
• Weight starting at 3.53 lbs (1.6 kg)
4
• HP Long-Life Rechargeable battery, with HP Fast Charge Technology recharges 50% in 30 minutes
3
• Supports wireless LAN for connectivity anywhere in the office
• 128 GB Solid State Drive
• Up to 8 GB system memory
• 720p HD webcam
• Spill-resistant and optional backlit Keyboard, and Clickpad
9
with multi-touch gestures enabled, taps enabled as default
1. Not all features and options compatible with HP ThinPro OS and HP Smart Zero.
2. MIL STD 810G testing is not intended to demonstrate fitness for U.S. Department of Defense contract requirements
or for military use. Test results are not a guarantee of future performance under these test conditions. Damage under the MIL STD test conditions or any accidental damage requires an optional HP Accidental Damage Protection Care Pack.
3. Recharges the battery up to 50% within 30 minutes when the system is off or in standby mode when used with the
power adapter provided with the notebook. After charging has reached 50% capacity, charging speed will return to normal. Charging time may vary +/-10% due to System tolerance.
4. Does not include power adapter.
5. Touchscreen panels are an optional feature that must be configured at purchase.
6. Touchscreen gesture support is limited on HP ThinPro/HP Smart Zero, and functionality is dependent upon
application being used.
7. TPM 2.0 is limited on HP ThinPro/HP Smart Zero, and functionality is dependent upon use of a customer-enabled
application that can locate the TPM chip.
8. Fingerprint Reader is an optional feature that requires Windows 10 IoT and must be configured at purchase.
9. Clickpad gesture support is limited on HP ThinPro/HP Smart Zero, and functionality is dependent upon application
being used.
NOTE: See important legal disclosures for all listed specs in their respective features’ sections.
QuickSpecs
HP mt22 Mobile Thin Client
Features
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 4
HP mt22 Mobile Thin Client
Preinstalled
Windows 10 IoT Enterprise1 HP ThinPro2 HP Smart Zero2
1.
Not all features are available in all editions or versions of Windows. Systems may require upgraded and/or separately purchased hardware, drivers, software or BIOS update to take full advantage of Windows functionality. ISP fees may apply and additional requirements may apply over time for
updates. See http://www.windows.com/.
2. Not all features are available with HP ThinPro
Intel® Celeron™ 5205U processor with Intel® UHD Graphics 620 (1.9 GHz base frequency, 2 MB L3 cache, 2 cores)
1,2,3,4,5
Processors Family
10th Generation Intel® Celeron™ processor2
1
Multicore is designed to improve performance of certain software products. Not all customers or software applications will necessarily benefit from use of this technology. Performance and clock frequency will vary depending on application workload and your hardware and software configurations. Intel’s numbering, branding and/or naming is not a measurement of higher performance.
2
Processor speed denotes maximum performance mode; processors will run at lower speeds in battery optimization mode.
3
Intel® Turbo Boost performance varies depending on hardware, software and overall system configuration. See
http://www.intel.com/technology/turboboost for more information.
4
Max Boost clock frequency performance varies depending on hardware, software and overall system configuration.
5
In accordance with Microsoft’s support policy, HP does not support the Windows 8 or Windows 7 operating system on products configured with Intel and AMD 7th generation and forward processors or provide any Windows 8 or Windows 7 drivers on http://www.support.hp.com.
Integrated with processor
Integrated
QuickSpecs
HP mt22 Mobile Thin Client
Features
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 5
Intel® UHD graphics 6201
Supports
Support HD decode, DX12, HDMI 1.4b up to 4K 30Hz
1HD content required to view HD images.
Non-Touch
35.56 cm (14") diagonal HD SVA eDP anti-glare slim, 220 nits, 45% NTSC two WLAN antennas (1366 x 768)
1,3
35.56 cm (14") diagonal HD SVA eDP anti-glare slim, 220 nits, 45% NTSC for HD camera and two WLAN antennas (1366 x
768)
1,3
35.56 cm (14") diagonal FHD IPS eDP anti-glare slim, 250 nits, 45% NTSC and two WLAN antennas (1920 x 1080)
1,3
35.56 cm (14") diagonal FHD IPS eDP anti-glare slim, 250 nits, 45% NTSC for HD camera and two WLAN antennas (1920 x
1080)
1,3
Touch
35.56 cm (14") diagonal FHD IPS eDP slim touch-on-panel screen, 250 nits, 45% NTSC for HD camera and two WLAN antennas (1920 x 1080)
1,2,3,4
HDMI
Supports resolutions up to 4K 30Hz
Display Size
14" diagonal
35.56cm (14") diagonal
1
HD content required to view HD images.
2
Touchscreen panels are an optional feature that must be configured at purchase.
3
Touchscreen gesture support is limited on HP ThinPro/HP Smart Zero, and functionality is dependent upon application being used.
4
Resolutions are dependent upon monitor capability, and resolution and color depth settings.
Primary M.2 Storage
128 GB M.2 SATA TLC Solid State Drive*
*For storage drives, GB = 1 billion bytes. TB = 1 trillion bytes. Actual formatted capacity is less. Up to 30 GB (for Windows
10) is reserved for system recovery software.
Maximum Memory
8 GB DDR4-2666 SDRAM
Memory
QuickSpecs
HP mt22 Mobile Thin Client
Features
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 6
8 GB DDR4-2666 SDRAM (2 x 4 GB)1 4 GB DDR4-2666 SDRAM (1 x 4 GB)
1,2
Memory Slots
2 SODIMM Both slots are customer accessible / upgradeable Comet Lake Celeron max transfer rates up to 2400 MT/s Supports Dual Channel Memory
1Due to the non-industry standard nature of some third-party memory modules, we recommend HP branded memory to
ensure compatibility. If you mix memory speeds, the system will perform at the lower memory speed.
2
Only available with HP ThinPro or HP Smart Zero.
QuickSpecs
HP mt22 Mobile Thin Client
Features
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 7
WLAN
Intel® Dual Band Wireless-AC 9560 802.11a/b/g/n/ac (2x2) WLAN and Bluetooth® 51 Combo(non-vPro™)2
Ethernet
Realtek 10/100/1000 GbE NIC
3
1Intel® Dual Band Wireless-AC 9560 802.11a/b/g/n/ac (2x2) Wi-Fi® and Bluetooth® is an optional feature that requires
Windows 10 IoT and must be configured at purchase.
2
Wireless access point and Internet service required and sold separately. Availability of public wireless access points limited.
3
The term "10/100/1000" or "Gigabit" Ethernet indicates compatibility with IEEE standard 802.3ab for Gigabit Ethernet, and does not connote actual operating speed of 1 Gb/s. For high-speed transmission, connection to a Gigabit Ethernet server and network infrastructure is required.
Audio
Integrated Microphone (Mono or Dual Array) 2 Integrated Stereo Speakers
Speaker Power
2W/4ohm Per speaker
Camera
720p HD webcam*
*Sold separately or as an optional feature.
Keyboard
HP Premium Keyboard, spill resistant with optional backlit function
Pointing Device Clickpad* with multi-touch gesture support
Function Keys
F1: Display Switching F2: Blank F3: Brightness Down F4: Brightness Up F5: Audio Mute F6: Volume Down F7: Volume Up
QuickSpecs
HP mt22 Mobile Thin Client
Features
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 8
F8: Mic Mute F9: Blank or Backlit Toggle F10: NumLock F11: Wifi Toggle F12: Sleep
Hidden Fuctions
Fn+R = Break Fn+S = Sys Rq Fn+C = Scroll Lock
*Clickpad gesture support is limited on HP ThinPro/HP Smart Zero, and functionality is dependent upon application being used.
BIOS
HP BIOSphere Gen52 BIOS Update via Network Master Boot Record Security Power on Authentication Secure Erase3 Absolute Persistence Module4 Pre-boot Authentication
Software
HP Connection Optimizer HP Hotkey Support HP Noise Cancellation Software
Manageability Features
HP ThinUpdate HP BIOS Config Utility (BCU) HP Device Manager
Client Security Software
HP Write Filter HP Fingerprint Sensor
5,1
Windows Defender
6,8
Security Management
Pre-boot Authentication TPM 2.0 Embedded Security Chip shipped with Windows 10 (Common Criteria EAL4+ Certified)9 USB enable/disable (via BIOS) Power-on password (via BIOS) Setup password (via BIOS) Support for chassis padlocks and cable lock devices HP Sure Start Gen57
QuickSpecs
HP mt22 Mobile Thin Client
Features
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 9
1.Fingerprint Reader is an optional feature that requires Windows 10 IoT and must be configured at purchase.
2.HP BIOSphere Gen5 is available on select HP Mobile Thin Clients. See product specifications for details. Features may vary depending on the platform and configurations.
3.For the methods outlined in the National Institute of Standards and Technology Special Publication 800-88 "Clear"
sanitation method. HP Secure Erase does not support platforms with Intel® Optane™.
4.Absolute agent is shipped turned off and will be activated when customers activate a purchased subscription. Subscriptions can be purchased for terms ranging multiple years. Service is limited, check with Absolute for availability outside the U.S. The Absolute Recovery Guarantee is a limited warranty. Certain conditions apply. For full details visit: http://www.absolute.com/company/legal/agreements/ computrace­agreement. Data Delete is an optional service provided by Absolute Software. If utilized, the Recovery Guarantee is null and void. In order to use the Data Delete service, customers must first sign a Pre­Authorization Agreement and either obtain a PIN or purchase one or more RSA SecurID tokens from Absolute Software.
5.HP Fingerprint Sensor sold separately or as an optional feature.
6.Windows Defender Opt in and internet connection required for updates.
7.HP Sure Start Gen5 is available on select HP PCs with Intel processors. See product specifications for availability.
8.Windows Defender requires Windows 10 IoT
9.TPM 2.0 is limited on HP ThinPro/HP Smart Zero, and functionality is dependent upon use of a customer­enabled application that can locate the TPM chip.
Recommended TC config for Microsoft Teams media optimization
TC CPU
VMware Teams Optimization
Citrix Teams Optimization
t430
1.10 GHz 2 Core
-
-
t530
1.50 GHz 2 Core
-
-
t540
1.50 GHz 2 Core
-
-
t630
2.00 GHz 4 Core
✓
✓
t628
1.99 GHz 4 Core
-
✓
t638
2.00 GHz 4 Core
✓
✓
t640
2.40 GHz 2 Core
✓
✓
t730
2.70 GHz 4 Core
✓
✓
t740
3.25 GHz 4 Core
✓
✓
mt21
1.80 GHz 2 Core
-
✓
mt22
1.90 GHz 2 Core
-
✓
mt31
1.80 GHz 2 Core
-
✓
mt32
2.70 GHz 4 Core
✓
✓
mt45
2.10 GHz 4 Core
✓
✓
QuickSpecs
HP mt22 Mobile Thin Client
Features
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 10
mt46
2.50 GHz 4 Core
✓
✓
- Not recommended, ✓ recommended
Power Supply
• HP Smart 65 W External AC power adapter
1
• HP Smart 65 W EM External AC power adapter
1
• HP Smart 65 W USB Type-C™ adapter
1
• HP Smart 45 W External AC power adapter
1
• HP Smart 45 W USB Type-C™ adapter
1
Primary Battery
HP Long Life 3-cell, 45 Wh Li-ion2
Battery life
Up to 14 hours and 45 minutes3
Power Cord
3-wire plug - 1m1 3-wire plug – 1.8m1 2-wire plug - 1m1 Duckhead power cord- 1m1 Duckhead power cord- 1.8m1
Battery Weight
0.49 lb
0.22 kg
1
Availability may vary by country.
2
Battery is internal and not replaceable by customer. Serviceable by warranty.
3
Windows 10 MM14 battery life will vary depending on various factors including product model, configuration, loaded applications, features, use, wireless functionality, and power management settings. The maximum capacity of the battery will naturally decrease with time and usage. See http://www.bapco.com for additional details.
Product Weight
Starting at 3.53 lbs (Non-touch); Starting at 3.55 lbs (Touch1)* Starting at 1.6 kg (Non-touch); Starting at 1.61 kg (Touch1)*
NOTE: Does not include power adapter.
1
Touchscreen panels are an optional feature that must be configured at purchase. Touchscreen gesture support is limited on HP ThinPro/HP Smart Zero, and functionality is dependent upon application being used. *Weight will vary by configuration.
Product Dimensions (w x d x h)
QuickSpecs
HP mt22 Mobile Thin Client
Features
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 11
12.76 x 9.36 x 0.71 in
32.42 23.77 x 1.8 cm
1 USB 3.1 Type-C™ Gen 1 (Power delivery, DisplayPort™) 2 USB 3.1 Gen 1 1 USB 2.0 (Powered port) 1 HDMI 1.4b* 1 RJ-45 1 AC power 1 Headphone/Microphone Combo Jack 1 Standard Security Lock
Expansion Slots
1 SD Supports SD, SDHC, SDXC
*HDMI cable sold separately.
HP Services offers 3-year and 1-year limited warranties and 90 day software limited warranty options depending on country. Batteries have a default one year limited warranty except for Long Life Batteries which will have same 1-year or 3- year limited warranty as the platform. On-site service and extended coverage is also available. HP Care Pack Services are optional extended service contracts that go beyond the standard limited warranties. To choose the right level of service for your HP product, use the HP Care Pack Services Lookup Tool at: http://www.hp.com/go/cpc.
1
1
HP Care Packs are sold separately. Service levels and response times for HP Care Packs may vary depending on your geographic location. Service starts on date of hardware purchase. Restrictions and limitations apply. For details, visit
http://www.hp.com/go/cpc. HP services are governed by the applicable HP terms and conditions of service provided or
indicated to Customer at the time of purchase. Customer may have additional statutory rights according to applicable local laws, and such rights are not in any way affected by the HP terms and conditions of service or the HP Limited Warranty provided with your HP Product.
ENERGY STAR® certified EPEAT® 2019 Gold for US, Canada, UK, Australia, New Zealand, and India1 EPEAT® 2019 Silver for other countries1 Low halogen2 TCO NB 5.0 Certification
1Based on US EPEAT® registration according to IEEE 1680.1-2018 EPEAT®. Status varies by country. Visit
http://www.epeat.net for more information.
2
External power supplies, power cords, cables and peripherals are not Low Halogen. Service parts obtained after purchase may not be Low Halogen.
QuickSpecs
HP mt22 Mobile Thin Client
Features
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 12
Maximum Resolution: 1920 x 1080
Screen Size, imperial: 14 (diagonal)
Weight, Metric: 1.6
Weight, Imperial: 3.53
QuickSpecs
HP mt22 Mobile Thin Client
Technical Specifications
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 13
Stand-Alone Power Requirements (AC Power)
Nominal Operating Voltage
19 V
Average Operating Power
Win 10
Integrated graphics
Yes
Discrete Graphics
N17S-G2: 25 W N16S-GTR: 19 W
Max Operating Power
Discrete < 65 W UMA < 45 W
Temperature
Operating
32° to 95° F (0° to 35° C) (Not writing optical)
Non-operating
41° to 95° F (5° to 35° C) (Writing optical)
Relative Humidity
Operating
10% to 90%, non-condensing
Non-operating
5% to 95%, 101.6° F (38.7° C) maximum wet bulb temperature
Shock
Operating
40 G, 2 ms, half-sine
Non-operating
200 G, 2 ms, half-sine
Random Vibration
Operating
0.75 grms
Non-operating
1.50 grms
Altitude (unpressurized) Operating
-50 to 10,000 ft (-15.24 to 3,048 m)
Non-operating
-50 to 40,000 ft (-15.24 to 12,192 m)
Planned Industry Standard Certifications
UL
Yes
CSA
Yes
FCC Compliance
Yes
ENERGY STAR®
Select models1
EPEAT
EPEAT® 2019 Gold for US, Canada, UK, Australia, New Zealand, and India
2
EPEAT® 2019 Silver for other countries2
ICES
Yes
Australia /NZ A-Tick Compliance
Yes
CCC
Yes
Japan VCCI Compliance
Yes
KC
Yes
BSMI
Yes
CE Marking Compliance
Yes
BNCI or BELUS
Yes
CIT
Yes
GOST
Yes
Saudi Arabian Compliance (ICCP)
Yes
SABS
Yes
1
Configurations of the HP mt22 Mobile Thin Client is ENERGY STAR® certified are identified as HP mt22 Mobile Thin Client ENERGY STAR on HP websites and on http://www.energystar.gov.
2
Based on US EPEAT® registration according to IEEE 1680.1-2018 EPEAT®. Status varies by country. Visit http://www.epeat.net for more information.
QuickSpecs
HP mt22 Mobile Thin Client
Technical Specifications
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 14
NOTE:
All specifications represent the typical specifications provided by HP's component manufacturers; actual performance
may vary either higher or lower.
Panel LCD 14inch diagonal HD (1366 x 768) Anti-Glare WLED SVA 45% NTSC 220 nits eDP 1.2 w/o PSR slim NB non-touch
Outline Dimensions (W x H x D)
316.2 x 198.04 (max.)
Active Area
309.4 x 173.95
Weight
<280 g max.
Diagonal Size
14.0 (inch)
Thickness
3.0 mm max
Interface
eDP 1.2 (1 lane)
Surface Treatment
Anti-Glare
Touch Enabled
No
Contrast Ratio
300:1 (typ)
Refresh Rate
60 Hz
Brightness
220 nits typical (Panel Only)
Pixel Resolution
1366 x 768 (HD)
Format of LCD Pixel Arrangement
RGB
Backlight
LED
Color Gamut Coverage
45% of NTSC
Color Depth
6 bits + Hi FRC
Viewing Angle
SVA 40/40/15/30
Panel LCD 14inch diagonal FHD (1920 x 1080) Anti­Glare WLED UWVA 45% NTSC 250 nits eDP slim NB
Outline Dimensions (W x H x D)
316.17 x 197.98 mm (max)
Active Area
309.37 x 174.02 mm (typ.)
Weight
285 g (max)
Diagonal Size
14.0 inch
Thickness
3.0 mm (max)
Interface
eDP 1.2 (2 lane)
Surface Treatment
Anti-Glare
Touch Enabled
No
Contrast Ratio
600:1 (typ.)
Refresh Rate
60 Hz
Brightness
250 nits
Pixel Resolution
1920 x 1080 (FHD)
Format of LCD Pixel Arrangement
RGB
Backlight
LED
Color Gamut Coverage
45% of NTSC
Color Depth
6 bits
QuickSpecs
HP mt22 Mobile Thin Client
Technical Specifications
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 15
Viewing Angle
UWVA 85/85/85/85
Panel LCD 14inch diagonal FHD (1920 x 1080) Anti­Glare WLED UWVA 45% NTSC 250 nits eDP slim Touch on Panel NWBZ
Outline Dimensions (W x H x D)
316.112 x 197.98 mm (max)
Active Area
309.37 x 174.02 mm (typ.)
Weight
290 g (max)
Diagonal Size
14.0 inch
Thickness
3.0 mm (panel side) / 3.2 mm (PCBA Side) (max)
Interface
eDP 1.2
Surface Treatment
Anti-Glare On-cell
Touch Enabled
Yes
Contrast Ratio
600:1 (typ.)
Refresh Rate
60 Hz
Brightness
250 nits
Pixel Resolution
1920 x 1080 (FHD)
Format of LCD Pixel Arrangement
RGB
Backlight
LED
Color Gamut Coverage
45% of NTSC
Color Depth
6 bits
Viewing Angle
UWVA 85/85/85/85
Model
Synaptics Validity VFS7604 touch sensor
Mobile Voltage Operation
3.0V to 3.6V
Operating Temperature
0~60°C
Microphone In
Stereo
Headphone/Line Out
Stereo
Integrated Microphone
Yes, dual digital microphone array
Current Consumption Image
100mA Max
Low Latency Wait For Finger
260 uA
ESD Resistance
IEC 61000-4-2 4B (+/-15KV)
Detection Matrix
363 dpi / 7.4 x 6 mm sensor area
FRR (False Reject Rate) / FAR (False Acceptance Rate)
FRR <1% @ 1:50K FAR
QuickSpecs
HP mt22 Mobile Thin Client
Technical Specifications
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 16
Intel® 9560
802.11a/b/g/n/ac (2 x 2) Wi-Fi® and Bluetooth® 5.0 Combo1 non-vPro
Wireless LAN Standards
IEEE 802.11a IEEE 802.11b IEEE 802.11g IEEE 802.11n IEEE 802.11ac IEEE 802.11d IEEE 802.11e IEEE 802.11h IEEE 802.11i IEEE 802.11k IEEE 802.11r IEEE 802.11v
Interoperability
Wi-Fi® certified
Frequency Band
802.11b/g/n
• 2.402 – 2.482 GHz
802.11a/n
• 4.9 – 4.95 GHz (Japan)
• 5.15 – 5.25 GHz
• 5.25 – 5.35 GHz
• 5.47 – 5.725 GHz
• 5.825 – 5.850 GHz
Data Rates
• 802.11b: 1, 2, 5.5, 11 Mbps
• 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
• 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
• 802.11n: MCS 0 ~ MCS 15, (20MHz, and 40MHz)
• 802.11ac: MCS0 ~ MCS9, (1SS, and 2SS) (20MHz, 40MHz,
80MHz & 160MHz)
Modulation
Direct Sequence Spread Spectrum BPSK, QPSK, CCK, 16-QAM, 64-QAM, 256-QAM
Security3
• IEEE and WiFi compliant 64 / 128bit WEP encryption for a/b/g
mode only
• AES-CCMP: 128 bit in hardware
• 802.1x authentication
• WPA, WPA2: 802.1x. WPA-PSK, WPA2-PSK, TKIP, and AES.
• WPA2 certification
• IEEE 802.11i
• WAPI
Network Architecture Models
Ad-hoc (Peer to Peer) Infrastructure (Access Point Required)
Roaming
IEEE 802.11 compliant roaming between access points
Output Power
2
• 802.11b: +18.5dBm minimum
• • 802.11g: +17.5dBm minimum
• • 802.11a: +18.5dBm minimum
• • 802.11n HT20(2.4GHz): +15.5dBm minimum
QuickSpecs
HP mt22 Mobile Thin Client
Technical Specifications
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 17
• • 802.11n HT40(2.4GHz): +14.5dBm minimum
• • 802.11n HT20(5GHz): +15.5dBm minimum
• • 802.11n HT40(5GHz): +14.5dBm minimum
• 802.11ac VHT80(5GHz): +11.5dBm minimum
• 802.11ac VHT160(5GHz): +11.5dBm minimum
Power Consumption
•Transmit mode:2.0 W
•Receive mode:1.6 W
•Idle mode (PSP) 180 mW (WLAN Associated)
•Idle mode:50 mW (WLAN unassociated)
•Connected Standby/Modern Standby: 10mW
•Radio disabled: 8 mW
Power Management
ACPI and PCI Express compliant power management
802.11 compliant power saving mode
Receiver Sensitivity
26
802.11b, 1Mbps : -93.5dBm maximum
802.11b, 11Mbps : -84dBm maximum
802.11a/g, 6Mbps : -86dBm maximum
802.11a/g, 54Mbps : -72dBm maximum
802.11n, MCS07 : -67dBm maximum
802.11n, MCS15 : -64dBm maximum
802.11ac, MCS0 : -84dBm maximum
802.11ac, MCS9 : -59dBm maximum
Antenna type
High efficiency antenna with spatial diversity, mounted in the display enclosure Two embedded dual band 2.4/5 GHz antennas are provided to the card to support WLAN MIMO communications and Bluetooth communications
Form Factor
PCI-Express M.2 MiniCard with CNVi Interface
Dimensions
1. Type 2230: 2.3 x 22.0 x 30.0 mm
2. Type 1216: 1.67 x 12.0 x 16.0 mm
Weight
1. Type 2230: 2.8g
2. Type 126: 1.3g
Operating Voltage
3.3v +/- 9%
Temperature
Operating Non-operating
14° to 158° F (–10° to 70° C) –40° to 176° F (–40° to 80° C)
Humidity
Operating Non-operating
10% to 90% (non-condensing) 5% to 95% (non-condensing)
Altitude
Operating Non-operating
0 to 10,000 ft (3,048 m) 0 to 50,000 ft (15,240 m)
LED Activity
LED Amber – Radio OFF; LED White – Radio ON
1. Check latest software/driver release for updates on supported security features.
2. Maximum output power may vary by country according to local regulations.
3. Receiver sensitivity is measured at a packet error rate of 8% for 802.11b (CKK modulation)
and a packet error rate of 10% for 802.11a/g (OFDM modulation).
HP Integrated Module with Bluetooth 4.0/4.1/4.2/5.0 Wireless Technology
Bluetooth Specification
4.0/4.1/4.2/5.0 Compliant
Frequency Band
2402 to 2480 MHz
Number of Available Channels
Legacy : 0~79 (1 MHz/CH) BLE : 0~39 (2 MHz/CH)
Signaling Data Rate
Legacy: 3 Mbps signaling data rate1
QuickSpecs
HP mt22 Mobile Thin Client
Technical Specifications
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 18
BLE: 1 Mbps signaling data rate1
1. Actual throughput may vary.
Legacy: Synchronous Connection Oriented links up to 3, 64 kbps, voice channels
Legacy: Asynchronous Connection Less links 2178.1 kbps/177.1 kbps asymmetric (3-DH5) or 864 kbps symmetric (3-EV5)
Transmit Power
The Bluetooth component shall operate as a Class II Bluetooth device with a maximum transmit power of + 4 dBm for BR and EDR.
Power Consumption
Peak (Tx) 330 mW Peak (Rx) 230 mW Selective Suspend 17 mW
Electrical Interface
USB 2.0 compliant
Bluetooth Software Supported Link Topology
Microsoft Windows Bluetooth Software
Power Management
Microsoft Windows ACPI, and USB Bus Support
Certifications
FCC (47 CFR) Part 15C, Section 15.247 & 15.249
Power Management Certifications
ETS 300 328, ETS 300 826 Low Voltage Directive IEC950UL, CSA, and CE Mark
Bluetooth Profiles Supported
BT4.1-ESR 5/6/7 Compliance LE Link Layer Ping LE Dual Mode LE Link Layer LE Low Duty Cycle Directed Advertising LE L2CAP Connection Oriented Channels Train Nudging & Interlaced Scan BT4.2 ESR08 Compliance LE Secure Connection- Basic/Full LE Privacy 1.2 –Link Layer Privacy LE Privacy 1.2 –Extended Scanner Filter Policies LE Data Packet Length Extension FAX Profile (FAX) Basic Imaging Profile (BIP)2 Headset Profile (HSP) Hands Free Profile (HFP) Advanced Audio Distribution Profile (A2DP)
SSD 128 GB 2280 M2 SATA­3 TLC
Form Factor
M.2 2280
Capacity
128 GB
NAND Type
TLC
Height
0.09 in (2.3 mm)
Width
0.87 in (22 mm)
Weight
0.02 lb (10 g)
Interface
ATA-8, SATA 3.0
Maximum Sequential Read
Up To 520 MB/s
QuickSpecs
HP mt22 Mobile Thin Client
Technical Specifications
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 19
Maximum Sequential Write
Up To 450 MB/s
Logical Blocks
250,069,680
Operating Temperature
32° to 158°F (0° to 70°C) [ambient temp]
Features
DIPM; TRIM; DEVSLP
HP 45W Smart AC Adapter
Dimensions (H x W x D)
3.74 x 1.57 x 1.04 in (9.5 x 4.0 x 2.65 cm)
Weight
0.386 lb (175g) max
Not including power cord. Power cord varies by country.
Input
90 to 265 VAC
Input Efficiency
87.74% at 115Vac and 88.4% at 230Vac
Input frequency range
47 to 63 Hz
Input AC current
1.4 A at 90 VAC
Output
Output power
45W
DC output
19.5V
Hold-up time
5 msec at 115 VAC input
Output current limit
<8.0A
Connector
4.5mm Barrel Type, 3 pin/grounded, mates with interchangeable cords
Environmental Design
Operating
32° to 95° F (0° to 35° C)
temperature
Non-operating (storage) temperature
-4° to 185° F (-20° to 85° C)
Altitude
0 to 16,400 ft (0 to 5,000 m)
Humidity
20% to 95%
Storage Humidity
10% to 95%
EMI and Safety Certifications
*CE Mark - full compliance with LVD and EMC directives
* Worldwide safety standards - IEC60950, EN60950, UL60950, Class1, SELV; Agency approvals - C-UL-US, NORDICS, DENAN, EN55022 Class B, FCC Class B, CISPR22 Class B, CCC, NOM-1 NYCE.
* MTBF - over 200,000 hours at 25°C ambient condition.
HP 65W Smart AC adapter
Dimensions
90 x 51 x 28.5 mm
Weight
220 g +/- 10 g
Not including power cord. Power cord varies by country.
Input
Input Efficiency
88% min at 115 VAC and 89% min at 230 VAC
Input frequency range
47 to 63 Hz
Input AC current
1.7 A at 90 VAC
Output
Output power
65W
DC output
19.5V
QuickSpecs
HP mt22 Mobile Thin Client
Technical Specifications
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 20
Hold-up time
5 msec at 115 VAC input
Output current limit
<11.0A
Connector
4.5mm Barrel Type, 3 pin/grounded, mates with interchangeable cords
Environmental Design
Operating
32° F to 95° F (0° to 35° C)
temperature
Non-operating (storage) temperature
-4° F to 185° F (-20° to 85° C)
Altitude
0 to 16,400 ft (0 to 5000m)
Humidity
20% to 95%
Storage Humidity
10% to 95%
EMI and Safety Certifications
*CE Mark - full compliance with LVD and EMC directives
* Worldwide safety standards - IEC60950, EN60950, UL60950, Class1, SELV; Agency approvals - C-UL-US, NORDICS, DENAN, EN55022 Class B, FCC Class B, CISPR22 Class B, CCC, NOM-1 NYCE.
* MTBF - over 200,000 hours at 25°C ambient condition.
HP 65W EM Smart AC adapter
Dimensions
102 x 55 x 30 mm
Weight
270 g +/- 10 g
Not including power cord. Power cord varies by country.
Input
Input Efficiency
87% min at 115V/230V
Input frequency range
47 to 63 Hz
Input AC current
1.7 A at 90 VAC and maximum load
Output
DC output
65 W(19.5V/3.33A)
Hold-up time
5 msec at 115 VAC input
Output current limit
<11A, Over voltage protection- 29V max automatic shutdown
Connector
4.5mm Barrel Type, 3 pin/grounded, mates with interchangeable cords
Environmental Design
Operating
32° F to 95° F (0° to 35° C)
temperature
Non-operating (storage) temperature
-4° F to 185° F (-20° to 85° C)
Altitude
0 to 5,000 m
Humidity
0% to 95%
Storage Humidity
0% to 95%
EMI and Safety Certifications
*CE Mark - full compliance with LVD and EMC directives
* Worldwide safety standards - IEC60950, EN60950, UL60950, Class1, SELV; Agency approvals - C-UL-US, NORDICS, DENAN, EN55022 Class B, FCC Class B, CISPR22 Class B, CCC, NOM-1 NYCE.
* MTBF - over 200,000 hours at 25°C ambient condition.
QuickSpecs
HP mt22 Mobile Thin Client
Technical Specifications
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 21
AC Adapter 65 Watt nPFC USB type C™
Dimensions
74 x 74 x 28.5 mm
Weight
245 g +/- 10 g
Not including power cord. Power cord varies by country.
Input
Input Efficiency
81.5% min at 115 Vac/ 230Vac @ 5V/3A
86.7% min at 115 Vac/ 230Vac @ 9V/3A 88% min at 115 Vac/ 230Vac @ 10V/5A 8 8% min at 115 Vac/ 230Vac @ 12V/5A 89% min at 115 Vac/ 230Vac @ 15V/4.33A 89% min at 115 Vac/ 230Vac @ 20V/3.25A
Input AC current
1.7 A at 90 VAC and maximum load
Output power
65 W
DC output
5V/9V/10V/12V/15V/20V
Hold-up time
5 msec at 115 VAC input
Output current limit
<8.0A
Connector
Type C™
Environmental Design
Operating
32° F to 95° F (0° to 35° C)
temperature
Non-operating (storage) temperature
-4° F to 185° F (-20° to 85° C)
Altitude
0 to 16,400 ft (0 to 5000 m)
Humidity
5% to 95%
Storage Humidity
5% to 95%
EMI and Safety Certifications
*CE Mark - full compliance with LVD and EMC directives
* Worldwide safety standards - IEC60950, EN60950, UL60950, Class1, SELV; Agency approvals - C-UL-US, NORDICS, DENAN, EN55022 Class B, FCC Class B, CISPR22 Class B, CCC, NOM-1 NYCE.
* MTBF - over 200,000 hours at 25°C ambient condition.
AC Adapter 45 Watt nPFC USB type C™
Dimensions
62.0 x 62.0 x 28.5 mm
Weight
220 g +/- 10 g
Not including power cord. Power cord varies by country.
Input
Input Efficiency
Average Efficiency of 25%, 50%, 75%, 100% load condition with 115Vac/230Vac Spec:5V:
81.5%9V: 86.7%10V: 87.5%12V: 87.8%15V:
87.8%20V: 87.8%
Input frequency range
47 to 63 Hz
Input AC current
Max. 1.4 A at 90 Vac
Output power
5V/15W 9V/27W 10V/37.5W 12V/45W 15V/45W 20V/45W
QuickSpecs
HP mt22 Mobile Thin Client
Technical Specifications
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 22
DC output
5V/9V/10V/12V/15V/20V
Hold-up time
5 msec at 115 VAC input
Output current limit
<5.0A
Connector
Type C™
Environmental Design
Operating
32° F to 95° F (0° to 35° C)
temperature
Non-operating (storage) temperature
-4° F to 185° F (-20° to 85° C)
Altitude
0 to 16,400 ft (0 to 5000 m)
Humidity
20% to 95%
Storage Humidity
10% to 95%
EMI and Safety Certifications
*CE Mark - full compliance with LVD and EMC directives
* Worldwide safety standards - IEC60950, EN60950, UL60950, Class1, SELV; Agency approvals - C-UL-US, NORDICS, DENAN, EN55022 Class B, FCC Class B, CISPR22 Class B, CCC, NOM-1 NYCE.
* MTBF - over 200,000 hours at 25°C ambient condition.
3 Cell WHr 45 Long Life ­Polymer HP Fast Charge Technology1
Cells/Type
3cell Lithium-Ion
Energy
Amp-hour capacity
3.900 Ah
Watt-hour capacity
45Wh
Temperature
Operating (Charging)
32˚ to 113˚ F (0˚ to 45˚ C)
Operating (Discharging)
14˚ to 122˚ F (-10˚ to 60˚ C)
1
Recharges the battery up to 50% within 30 minutes when the system is off or in standby mode when used with the power adapter provided with the notebook. After charging has reached 50% capacity, charging speed will return to normal. Charging time may vary +/-10% due to System tolerance.
Eco-Label Certifications
& declarations
This product has received or is in the process of being certified to the following approvals and
may be labeled with one or more of these marks:
•IT ECO declaration
•US ENERGY STAR®
•EPEAT® 2019 Silver in U.S. Based on US EPEAT® registration according to IEEE 1680.1-
2018 EPEAT®. EPEAT® status varies by country. Visit http://www.epeat.net for more
information.
•TCO 8.0
•Korea Eco-label
System Configuration
The configuration used for the Energy Consumption and Declared Noise Emissions data for
the Notebook model is based on a “Typically Configured Notebook”.
Energy Consumption
(in accordance with US
ENERGY STAR® test
method)
115VAC, 60Hz
230VAC, 50Hz
100VAC, 50Hz
QuickSpecs
HP mt22 Mobile Thin Client
Technical Specifications
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 23
Normal
Operation
(Short
5.63 W
5.42 W
5.81 W
Normal
Operation
(Long
3.38 W
3.44 W
3.39 W
Sleep
0.83 W
0.79 W
0.81 W
Off
0.37 W
0.48 W
0.37 W
Energy efficiency data listed is for an ENERGY STAR® compliant product if offered within the model family. HP computers marked with the ENERGY STAR® Logo are compliant with the applicable U.S. Environmental Protection Agency (EPA) ENERGY STAR® specifications for computers. If a model family does not offer ENERGY STAR® compliant configurations, then energy efficiency data listed is for a typically configured PC featuring a hard disk drive, a high efficiency power supply, and a Microsoft Windows® operating system.
Heat Dissipation*
115VAC, 60Hz
230VAC, 50Hz
100VAC, 50Hz
Normal
Operation
(Short
19 BTU/hr
19 BTU/hr
20 BTU/hr
Normal
Operation
(Long
12 BTU/hr
12 BTU/hr
12 BTU/hr
Sleep
3 BTU/hr
3 BTU/hr
3 BTU/hr
Off
1 BTU/hr
2 BTU/hr
1 BTU/hr
Heat dissipation is calculated based on the measured watts, assuming the service level is
attained for one hour.
Declared Noise
Emissions
(in accordance with
ISO 7779 and ISO 9296)
Sound Power
(L
WAd
, bels)
Sound Pressure
(L
pAm
,
decibels)
Typically Configured –
Idle
2.5
14.2
Fixed Disk –
Random writes
2.8
20.0
Optical Drive –
Sequential reads
3.5
28.7
Longevity and Upgrading
This product can be upgraded, possibly extending its useful life by several years.
Upgradeable features and/or components contained in the product may include:
• 3 USB ports
•
1 PC card slot (type I/II)
• 1 ExpressCard/54 slot
• 1 IEEE 1394 Port
• 2 SODIMM memory slots
•
Optional expansion base docking station
•
1 multi-bay II storage port
Spare parts are available throughout the warranty period and or for up to “5” years after the end
of
production.
QuickSpecs
HP mt22 Mobile Thin Client
Technical Specifications
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 24
Batteries
This battery(s) in this product comply with EU Directive 2006/66/EC
Batteries used in the product do not
contain: Mercury greater the1ppm by
weight Cadmium greater than 20ppm by
weight
Battery description: CR2032 (coin
cell) Battery type: Lithium
Battery description: 6-cell high capacity Lithium-Ion battery (optional 8 cell available)
Additional Information
•This product is in compliance with the Restrictions of Hazardous Substances (RoHS) directive
- 2011/65/EC.
•This HP product is designed to comply with the Waste Electrical and Electronic Equipment
(WEEE)
Directive – 2002/96/EC.
•This product is in compliance with California Proposition 65 (State of California; Safe Drinking
Water and Toxic Enforcement Act of 1986).
•This product is in compliance with the IEEE 1680 (EPEAT) standard at the Silver level, see
http://www.epeat.net
•Plastics parts weighing over 25 grams used in the product are marked per ISO11469 and ISO1043.
•This product contains 12.55% post-consumer recycled plastic (by wt.) according to IEEE
1680.1- 2018 standard, criterion 4.2.1.1.
•This product is 94.3% recycle-able when properly disposed of at end of life.
Packaging Materials
External:
PAPER/Corrugated
0.230 g
Paper/Paper
0.051 g
Internal:
PLASTIC/EPE (Expanded Polyethylene)
0.048 g
PLASTIC/Polyethylene low density
0.009 g
Material Usage
This product does not contain any of the following substances in excess of regulatory lim its
(refer to the HP General Specification for the Environment at
http://www.hp.com/hpinfo/globalcitizenship/environment/pdf/gse.pdf):
• Asbestos
• Certain Azo Colorants
• Certain Brominated Flame Retardants – may not be used as flame retardants in plastics
• Cadmium
• Chlorinated Hydrocarbons
•
Chlorinated Paraffins
• Formaldehyde
• Halogenated Diphenyl Methanes
• Lead carbonates and sulfates
• Lead and Lead compounds
•
Mercuric Oxide Batteries
• Nickel – finishes must not be used on the external surface designed to be frequently handled
or carried by the user.
QuickSpecs
HP mt22 Mobile Thin Client
Technical Specifications
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 25
• Ozone Depleting Substances
• Polybrominated Biphenyls (PBBs)
• Polybrominated Biphenyl Ethers (PBBEs)
• Polybrominated Biphenyl Oxides (PBBOs)
• Polychlorinated Biphenyl (PCB)
• Polychlorinated Terphenyls (PCT)
• Polyvinyl Chloride (PVC) – except for wires and cables, and certain retail packaging has
been voluntarily removed from most applications.
• Radioactive Substances
•
Tributyl Tin (TBT), Triphenyl Tin (TPT), Tributyl Tin Oxide (TBTO)
Packaging Usage
HP follows these guidelines to decrease the environmental impact of product packaging:
• Eliminate the use of heavy metals such as lead, chromium, mercury and cadmium in packaging
materials.
•
Eliminate the use of ozone-depleting substances (ODS) in packaging materials.
• Design packaging materials for ease of disassembly.
•
Maximize the use of post-consumer recycled content materials in packaging materials.
• Use readily recyclable packaging materials such as paper and corrugated materials.
•
Reduce size and weight of packages to improve transportation fuel efficiency.
• Plastic packaging materials are marked according to ISO 11469 and DIN 6120 standards.
End-of-life Management
and Recycling
HP Inc. offers end-of-life HP product return and recycling programs in many geographic areas.
To recycle your product, please go to: http://www.hp.com/go/reuse-recycle or contact your
nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for
each product type for use by treatment facilities. This information (product disassembly
instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/recyclers. These
instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
HP Inc. Corporate
Environmental
Information
For more information about HP’s commitment to the environment:
Global Citizenship Report
http://www.hp.com/hpinfo/globalcitizenship/gcreport/index.html
Eco-label certifications
http://www8.hp.com/us/en/hp-information/environment/ecolabels.html
ISO 14001 certificates:
http://h20195.www2.hp.com/V2/GetDocument.aspx?docname=c04755842
and
http://www.hp.com/hpinfo/globalcitizenship/environment/pdf/cert.pdf
Country of Origin
China
QuickSpecs
HP mt22 Mobile Thin Client
Options and Accessories (sold separately and availability may vary by country)
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 26
Type
Description
Part Number
Cases
HP Essential Top Load Case
H2W17AA
HP Essential Backpack
H1D24AA
HP Essential Messenger Case
H1D25AA
Input/Output
HP Comfort Grip Wireless Mouse
H2L63AA
HP USB Essential Keyboard and Mouse
H6L29AA
HP Ultra Mobile Wireless Mouse
H6F25AA
HP 3-Button USB Laser Mouse
H4B81AA
HP USB Travel Mouse
G1K28AA
HP HDMI to DVI Adapter
F5A28AA
HP Elite USB-C Hub
4WX89AA
HP USB-C Travel Hub
Z9G82AA
Memory
4G B 2666MHz DDR4**
4VN05AA
8 GB 2666MHz DDR4**
4VN06AA
Power
HP 45W Smart AC Adapter 4.5mm
H6Y88AA
45W Smart Power Adapter 2 prong -4.5mm (Japan only)
L6F60AA
65W Smart Power Adapter (w/ 4.5mm to 7.5mm DC dongle)
H6Y89AA
HP 65W Slim AC Adapter
H6Y82AA
HP 65W USB-C Slim Power Adapter
3PN48AA
HP 65W USB-C Power Adapter
1HE08AA
HP 45W USB-C Power Adapter
1HE07AA
HP Power Bank HP USB-C Power Bank
N9F71AA
2NA10AA
Security
HP Essential Combination Lock 12.3mm
T0Y14AA
HP Combination Lock
T0Y15AA
HP Keyed Cable Lock 10mm
T1A62AA
UCC
HP Conferencing Keyboard
K8P74AA
HP UC Speaker Phone
4VW02AA
HP UC Wired Headset
K7V17AA
*Recommended for HP ThinPro **Comet Lake Celeron max transfer rates up to 2400 MT/s
QuickSpecs
HP mt22 Mobile Thin Client
c06527241— DA – 16635 Worldwide — Version 3 — January 14, 2021
Page 27
Date of change:
Version History:
Description of change:
March 27, 2020
From v1 to v2
Changed
Displays support section
January 14, 2021
From v2 to v3 Removed
Docking information
Changed
SOFTWARE AND SECURITY section
© Copyright 2021 HP Development Company, L.P. The information contained herein is subject to change without notice. The only warranties are contained in the limited warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Bluetooth is a trademark of its proprietor used by HP Inc. under license. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. Bluetooth is a trademark of its proprietor and used by HP Inc. under license. Intel and Celeron are trademarks of Intel Corporation in the U.S. and other countries. USB Type-C™ and USB-C™ are trademarks of USB Implementers Forum. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use