HP MSR20, MSR20-1x, MSR900, MSR93x Command Reference Guide

Download

Page 1

HP MSR Router Series

bout the HP MSR series

Command References(V5)

Part number: 5998-2035

Software version: CMW520-R2509

Document version: 6PW102-20130925

Page 2

Legal and notice information

No part of this documentation may be reproduced or transmitted in any form or by any means without prior written consent of Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice.

HEWLETT-PACKARD COMPANY MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

Page 3

About the HP MSR series command references

These command references apply to the following models of the HP MSR series routers:

Model

• MSR900

• MSR900-W

HP MSR 900

HP MSR 93X

HP MSR 20-1X

• MSR900-W(NA)

• MSR920

• MSR920-W

• MSR920-W(NA)

• MSR930 (JG511A)

• MSR930 (JG512A)

• MSR930 (JG513A)

• MSR930 (JG596A)

• MSR930 (JG665A)

• MSR931 (JG514A)

• MSR931 (JG515A)

• M S R 9 31 (J G 531 A)

• MSR933 (JG516A)

• MSR933 (JG517A)

• MSR935 (JG518A)

• MSR935 (JG519A)

• MSR935 (JG520A)

• MSR936 (JG597A)

• MSR20-10

• MSR20-11

• MSR20-12

• MSR20-12-W

• MSR20-12-T

• MSR20-12-T-W(NA)

• MSR20-13

• MSR20-13-W

• MSR20-13-W(NA)

HP MSR 20

• MSR20-20

• MSR20-21

• MSR20-40

Page 4

Model

HP MSR 30

HP MSR 50

• MSR30-10

• MSR30-11E

• MSR30-11F

• MSR30-16

• MSR30-20

• MSR30-40

• MSR30-60

• MSR30-10 DC

• MSR30-20 DC

• MSR30-40 DC

• MSR30-60 DC

• MSR30-16 PoE

• MSR30-20 PoE

• MSR30-40 PoE

• MSR30-60 PoE

• MSR50-40

• MSR50-60

• MSR50-40 DC

• MSR50-60 DC

The HP MSR series command references describe the commands and command syntax options available for the HP MSR Series Routers.

Command reference Content

Covers the commands for logging in to and setting up an MSR router. This command reference includes:

• CLI

• Logging In to the Router

• Device Management

Fundamentals Command Reference

• Configuration File Management

• File Management

• FTP and TFTP

• License Management

• Software Upgrade

• Automatic Configuration

Covers the interface configuration commands. This command reference includes:

• Ethernet Interface

Interface Command Reference

• WAN Inter faces

• ATM and DSL Interface

• POS Interface

• CPOS Interface

• Loopback and Null Interfaces

Layer 2 – LAN Switching Command Reference

Covers the commands for configuring Layer 2 technologies and features in a LAN switched network. This command reference includes:

Page 5

Command reference Content

• MAC Address Table

• VLAN

• Spanning Tree

• Ethernet Link Aggregation

• GVRP

• LLDP

• Por t Isolation

• VLAN Termination

Covers WAN access technologies. This command reference includes:

• SLIP

• PPP(PPP, PPPoE)

• ISDN

• Frame Relay

• DCC

Layer 2 – WAN Access Command Reference

• Modem Management

• ATM

• HDLC

• DLSw

• L2TP

• Bridging

• EtoPPP and EtoFR

• LAPB_and_X.25

Terminal Access Command Reference

Covers Terminal Access technologies. This command reference includes:

• Terminal Access

• IP Terminal Access

Covers the commands for configuring and managing IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6. This command reference includes:

• ARP(ARP, Gratuitous ARP, Proxy ARP, ARP Snooping)

• DHCP(DHCP Server, DHCP Relay Agent, DHCP Client, DHCP Snooping,

BOOTP Client)

• DNS(IPv4 DNS, IPv6 DNS, DDNS)

• IP Addressing

• Fast Forwarding

Layer 3 – IP Services Command Reference

• IP Performance Optimization

• NAT

• NAT-PT

• DVPN

• Tunneling

• UDP Helper

• GRE

• IPv6 Basics

• DHCPv6

• IPv6 Fast Forwarding

• IPv6 DNS

Page 6

Command reference Content

• IP Forwarding Basics

Covers the commands for configuring routes for IPv4 and IPv6 networks of different sizes, route filtering, route control, and policy based routing. This command reference includes:

• IP Routing Basics

• Static Routing

• RIP

• OSPF

• IS-IS

Layer 3 – IP Routing Command Reference

• BGP

• Routing Policy

• Policy-Based Routing

• IPv6 Static Routing

• RIPng

• OSPFv3

• IPv6 IS-IS

• IPv6 BGP

• IPv6 Policy-Based Routing

Covers the commands for Layer 3 IPv4 multicast protocols IGMP, PIM, MBGP, and Layer 3 IPv6 multicast protocols MLD, IPv6 PIM, MSDP, and IPv6 MBGP), Layer 2 IPv4 multicast protocols (IGMP snooping), and Layer 2 IPv6 multicast protocols (MLD snooping). This command reference includes:

• IGMP

• PIM

• Multicast Routing and Forwarding

IP Multicast Command Reference

• IGMP Snooping

• MSDP

• MBGP

• Multicast VPN

• MLD

• IPv6 PIM

• IPv6 Multicast Routing and Forwarding

• MLD Snooping

• IPv6 MBGP

Covers the commands for MPLS and MPLS VPN. This command reference includes:

• MPLS Basics

MPLS Command Reference

• MPLS L2VPN

• MPLS L3VPN

• MPLS TE

• L2VPN Access to L3VPN or IP Backbone

Covers the commands for classifying traffic with ACLs, and allocating

ACL and QoS Command Reference

network resources and managing congestions with QoS technologies to improve network performance and network use efficiency. This command reference includes:

• ACL

Page 7

Command reference Content

• QoS(QoS Policy, Priority Mapping, Traffic Policing, GTS and Line Rate,

Congestion Management, Congestion Avoidance, DAR)

• FR QoS

• MPLS QoS

Covers security feature commands. Available security features include identity authentication (AAA), access security (802.1X, MAC authentication, and portal), secure management (SSH), SSL, and attack protection (IP source guard, ARP attack protection, and URPF). This command reference includes:

• AAA

• 802.1X(802.1X, 802.1X-Based EAD Fast Deployment)

• MAC Authentication

• Por t Security

• IPsec

• PKI

• Public Key

• RSH

• Por tal

• Firewall

Security Command Reference

• SSH2.0

• SSL

• SSL VPN

• User Profile

• ARP Attack Protection

• IP Source Guard

• Attack Detection and Protection

• TCP Attack Protection

• Connection Limit

• Password Control

• HABP

• URPF

• User Isolation

• FIPS

• Group Domain VPN

Covers Voice features commands. This command reference includes:

• Voice Entity

• Voice Subscriber Line

• Dial Plan

• SIP(SIP, SIP Local Survival, SIP Trunk)

Voice Command Reference

• Call Services

• Call-Watch

• Fax over IP

• Customizable IVR

• VoFR

• Voice RAD IUS

WLAN Command Reference Covers WLAN features commands. This command reference includes:

Page 8

Command reference Content

• WLAN Interface

• WLAN Service

• WLAN RRM

• WLAN Security

• WLAN IDS(WLAN IDS, WLAN Frame Filtering)

• WLAN QoS

Covers high availability commands for managing failure detection. Failure detection technologies focus on fault detection and isolation. This command reference includes:

High Availability Command Reference

• BFD

• Interface Backup

• Track

• VRRP

Covers the commands that help you manage and monitor your network, for example, manage system events, sample packets, assess network performance, and test network connectivity. This command reference includes:

• SNMP(SNMP, MIB)

• RMON

• NTP

• Cluster Management

• CWMP

Network Management and Monitoring Command Reference

• IP Accounting

• NetStream

• NQA(NQA Client, NQA Server)

• IP Traffic Ordering

• sFlow

• Sampler

• PoE

• Mirroring(Port Mirroring, Traffic Mirroring)

• Information Center

• System Maintenance and Debugging

• IPv6 NetStream

Covers the commands for logging in to the HP open application platform (OAP) card connected to your device and resetting the operating system of the OAP card. HP OAP cards use the open service architecture design, and

OAA Command Reference

enable you to provide custom services. This command reference includes:

• OAP Module

• ACFP

• ACSEI

IPX Configuration Guide

Covers IPX commands. This command reference includes:

• IPX

Page 9

Support and other resources

Contacting HP

For worldwide technical support information, see the HP support website:

http://www.hp.com/support

Before contacting HP, collect the following information:

• Product model names and numbers

• Technical support registration number (if applicable)

• Product serial numbers

• Error messages

• Operating system type and revision level

• Detailed questions

Subscription service

HP recommends that you register your product at the Subscriber's Choice for Business website:

http://www.hp.com/go/wwalerts

After registering, you will receive email notification of product enhancements, new driver versions, firmware updates, and other product resources.

Related information

Documents

To find related documents, browse to the Manuals page of the HP Business Support Center website:

http://www.hp.com/support/manuals

• For related documentation, navigate to the Networking section, and select a networking category.

• For a complete list of acronyms and their definitions, see HP FlexNetwork Technology Acronyms.

Websites

• HP.com http://www.hp.com

• HP Networking http://www.hp.com/go/networking

• HP manuals http://www.hp.com/support/manuals

• HP download drivers and software http://www.hp.com/support/downloads

• HP software depot http://www.software.hp.com

• HP Education http://www.hp.com/learn