HP MSM720, MSM760, MSM765 Specification

HP MSM720 Access Controller (WW)

HP MSM760 Premium Mobility Controller/HP MSM760 Access Controller

HP MSM765 zl Premium Mobility Controller

QuickSpecs

HP MSM Controller Series

Overview

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 1

Key features

Ease of use, scalability, and redundancy
Enhanced architecture for flexible network design
IEEE 802.11a/b/g/n AP and access device support
Comprehensive WLAN security
Appliance and blade form factors

Product overview

Working in unison with HP MSM controllers, the HP MSM-802.11n Access Point Series delivers high-performance networking solution.
The enhanced controller architecture scales to IEEE 802.11n without requiring a controller replacement. The MSM controllers provide
advanced radio resource management (RRM), including client load balancing and interference mitigation. The MSM wireless controllers
support a fast-roaming capability.

The MSM430 and MSM46x access points provide RF Spectrum Analysis with detection and classification of non-IEEE 802.11
interference. These access points have the ability to automatically avoid interference.

Wireless security is comprehensive with integrated Wireless IDS (MSM410, MSM430, and MSM46x access points) and support for
internal and external authentication, authorization, and accounting (AAA) servers; a built-in stateful firewall; per-user VLAN mapping;
and authentication.

Features and benefits

Management

Wi-Fi Clear Connect

provides a system-wide approach to deliver WLAN reliability by proactively determining and adjusting to changing RF conditions;
optimizes WLAN performance by detecting interference from Wi-Fi and non-Wi-Fi sources using Spectrum Analysis capabilities
built into the MSM430 and MSM46x access points, identifying rogue activity (MSM410, MSM430, and MSM46x), and making
decisions at a system-wide level

Advanced radio resource management

Automatic radio power adjustments

include real-time power adjustments based on changing environmental conditions and signal coverage adjustment

Automatic radio channel

provides intelligent channel switching and real-time interference detection

Intelligent client load balancing

determines the number of clients across neighboring APs and adjusts client allocation to balance the load

Airtime fairness

helps ensure equal RF transmission time for wireless clients

Spectrum Analysis (requires MSM430 or MSM46x models)

Power/frequency spectrum analysis

measures noise from IEEE 802.11 remote sources

Signal detection/classification

identifies source of RF interference, for example, Bluetooth, cordless phones, and microwave ovens

Evaluation of channel quality

helps detect severe channel degradation and improves the reporting of poor RF performance

Automated work flows

:

Initial controller settings

define basic operational settings for the controller, for example, network connections, security settings, and system time

QuickSpecs

HP MSM Controller Series

Overview

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 2

Wireless network for employees

enables setup of a new wireless network for employees, for example, network and security settings, and basic voice and
video settings

Wireless network for guests

provides wireless access for guest users, for example, network and security settings specific to guest access

Remote configuration and management

are available through a secure Web browser, command-line interface (console port or SSH), SOAP, or SNMP

Management interface control

allows interfaces to be enabled or disabled depending on security preferences

Management VLAN

segments traffic to and from management interfaces, including CLI, Web browser interface, and SNMP

RADIUS accounting support

separates RADIUS accounting server support per SSID; provides detailed session, usage, and billing information for each client
activity

Logging

provides local and remote logging of events via SNMP (v2c and v3) and syslog; provides log throttling and log filtering to reduce
the number of log events generated

Controller networking

includes IEEE 802.1d-compliant bridging and Bridge MIB (RFC 4188), which is supported only on a primary bridge interface;
stateful firewall; PPPoE Client (RFC 2516); ICMP (RFC 792); IEEE 802.1q VLAN tagging; NAT (RFC 1631); CIDR (RFC 1519); L2TP
and PPTP servers for wireless clients; VPN client, which establishes PPTP or IPSec tunnels to other devices; and IGMP snooping
(IGMP proxy v1 and v2), which is supported on the wireless interfaces of APs

DHCP support

includes RFC 2131 and RFC 3046 (DHCP Relay Option-82) for server and built-in DHCP client for client

Band steering

the MSM422, MSM430, MSM466, and MSM466-R APs can automatically redirect 5 GHz-capable clients to the less-congested 5
GHz spectrum

Controller management

provides secure Web browser (SSL and VPN), command-line interface, SOAP, SNMP v2c and v3, MIB-II with traps, RADIUS
Authentication Client MIB (RFC 2618), and RIPv2 MIB Extension (RFC 1724); implements scheduled configuration and firmware
upgrades from a central server; offers per-user activity records by time used or data transferred; supports remote syslog

HP Intelligent Management Center and Wireless Services Manager Software

provide centralized management for discovery, logging, status, and configuration management

Unified network visibility

provides visibility between a wired and wireless network using IEEE 802.1AB Link Layer Discovery Protocol (LLDP) and sFlow

Diagnostics

client event log records association, authentication, and DHCP events; includes a packet capture tool for Ethernet and IEEE

802.11 interfaces (PCAP format), a wireless client data rate matrix, and a client status page; complete session logging provides
detailed information for problem identification and resolution

Firewall

Stateful firewall

:
enforces firewall policies to control traffic and filter access to network services; maintains session information for every
connection passing through it, enabling the firewall to control packets based on existing sessions

NAT/PAT

choice of dynamic partial address translation (PAT) or static network address translation (NAT) preserves a network's IP address
pool or conceals the private address of network resources, such as Web servers, which are made accessible to users of a guest
or public wireless LAN

Authenticated network access

QuickSpecs

HP MSM Controller Series

Overview

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 3

authenticates users with an internal or external RADIUS server or Microsoft® Active Directory before allowing full network
connectivity connectivity

Quality of Service

(QoS)

Rate limiting

supports per-wireless client ingress-enforced maximums and per-wireless client, per-queue guaranteed minimums

Centralized traffic

Layer 2 and Layer 3 QoS settings are maintained when using Mobility Traffic Manager or guest access

Mobility

Solutions enhanced for businesses

MSM7xx controllers deliver services for a range of vertical markets, including healthcare, hospitality, education, manufacturing,
transportation, and service providers

Powerful security capabilities

robust, identity- and role-based user account profiles use internal or external AAA services

Solutions that cover the most important WLAN applications

HP MSM solutions deliver rich application support, including guest access, location-based services, Voice over Wi-Fi (VoWi-Fi),
hotspot, surveillance, and secure point of sale

Capacity that scales from small office to large campus

efficiently deploy wireless LANs (WLANs) with the MSM720 controller, which supports 10 to 40 APs; and the MSM760 and
MSM765 zl controllers, which control 40 to 200 APs

Premium Mobility scalability features

Virtual controller

supports a team of up to 800 APs and five controllers (MSM76x—must be the same type within a team) or 40 APs across
two controllers (MSM720) managed via a single IP address

N+1 redundancy

teaming provides N+1 redundancy

Seamless failover

APs can fail-over without rebooting, which preserves network mobility services for wireless clients when the client traffic
is bridged locally at the AP

64 VSC profiles

up to 64 profiles can be defined

Mobility Traffic Manager

flexible and multiple network distribution schemes address a range of business needs; policies for user network and security
profiles are consistently applied and enforced; wireless traffic can be directed anywhere in the network as required; enterprise
businesses can easily migrate to the MSM mobility solution, preserving prior network designs

Controller client access control

provides SSL-protected universal access method, MAC address authentication, and IEEE 802.1x authentication; Web proxy
server; support for centralized portal; AAA Security; WPA and WPA2 encryption; client-fixed IP address spoofing; per-site and
per-user access lists; white list and black list support; bandwidth limiting per user, per VLAN, or per VSC; and concurrent users
(250 for the MSM720, and 2,000 for the MSM760 and MSM765 zl controllers)

Simplified management with central control

MSM7xx controllers reduce the time and complexity of managing a wireless network; the solution controls up to hundreds of
APs (depending on the controller) from a single management interface and helps ensure that a consistent set of services is
delivered throughout the wireless network; the controllers push authentication, encryption, QoS enforcement, and access
policies to the access points, delivering intelligence to the edge of mobile networks

Services

provides standard Layer 2 roaming and VoWLAN support on all controllers, advanced fast roaming on mobility controllers, plug­and-play AP management, and public and guest Internet access

QuickSpecs

HP MSM Controller Series

Overview

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 4

Advanced fast roaming (requires mobility controller or upgrade)

provides WPA2 Opportunistic Key Caching through controller support and inter-/intra-subnet roaming and seamless roaming
(less than 50 ms roaming delay) support for Voice-over-Wi-Fi deployments

Security

Integrated IDS support (Premium Mobility version required)

Automated AP and client classification

reduces manual effort (administrator can override AP classification)

Comprehensive detection capabilities

detects a wide range of attacks

Flexible event reporting

enables configuration of which events will result in notifications

Location tracking capabilities

helps identify the location of a rogue device

Flexible deployment models

supports time slicing or dedicating a radio to detect full time

Secure shell

encrypts all transmitted data for secure remote CLI access over IP networks

Secure Sockets Layer (SSL)

encrypts all HTTP traffic, allowing secure access to the
browser-based management GUI in the switch

IEEE 802.1X, Active Directory, and RADIUS network logins

control wireless network access for authentication and accountability using IEEE 802.1x, Microsoft Active Directory, and RADIUS

RADIUS-based MAC authentication

authenticates a wireless client with a RADIUS server based on the MAC address of the client; this is useful for clients with minimal
or no user interface

Web-based authentication

provides a Web browser-based environment to authenticate clients that may not support the IEEE 802.1X supplicant

IEEE 802.1x supplicant on MSM APs

helps prevent deployment of rogue networking equipment

Secure management access

securely encrypts all access methods (CLI, GUI, or MIB) through SSH v2c, SSL, and/or SNMPv3

Policy management

Standards-based authentication support for Microsoft Active Directory and IEEE 802.1X

seamlessly integrates into existing authentication services or uses the built-in database

Integration with HP IMC Network Management software

helps ensure consistent policy enforcement across wired and wireless networks

Connectivity

10 GbE connections to the switch fabric (MSM765 zl Premium Mobility controller only)

two 10-GbE wire-speed internal connections help ensure that the network connections from the application to the switch
backplane will not limit application performance

IPv6 wireless client traffic forwarding

is supported for Layer 2 and Layer 3 mobility (MTM) and for client traffic directly bridged at the AP

IEEE 802.3ad Link Aggregation Control Protocol (LACP) and HP port trunking (MSM720 controller only)

support up to six ports bonded via LACP; support manually configured trunks between an HP switch and the controller

QuickSpecs

HP MSM Controller Series

Overview

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 5

Performance

High-performance processor system

:

MSM720 controllers

Freescale Dual Core 800MHZ P1020 Processor with a 256 KB cache and 1G byte of DDR3 memory in an appliance designed
for 10 to 40 APs

MSM760 controllers

Intel® Core™ 2 Duo Processor E6400 with 2.13 GHz and 2 MB cache in an appliance designed for larger environments

MSM765 zl controller

Intel Core 2 Duo Processor T7500 with 2.2 GHz and 4 MB cache in a single-switch slot designed for larger chassis-based
environments

Memory subsystems

4/2/1 GB of memory (MSM765 (DDR2)zl/MSM760 (DDR2)/MSM720 (DDR3) provides enhanced application performance

Disk drive (MSM76x)

250 GB SATA II 7200 rpm hard disk drive allows rapid data reads/writes, providing improved application performance

Additional information

TAA versions for the MSM720 controller

for U.S. government manufactured sales requirements, order the TAA MSM720 controller models; for all other AMS and WW
orders, use WW models

New licensing model for guest user access (v5.7 and later)

the full number of supported guest access user sessions is enabled with the base-level controller models and no longer is tied to
the AP upgrade license (e.g., the base MSM720 [access and Premium Mobility] controllers will now support 250 concurrent guest
access user sessions; the MSM76x base controllers will now support 2,000 guest access user sessions without requiring
additional AP license
upgrades)

10-AP license upgrade option

can be used on the MSM720 and MSM76x products on all supported firmware releases

New licensing model for the MSM317 access device (v5.7 and later)

no additional AP license is required for the MSM317; non-MSM317 devices are subject to AP licensing; maximum wireless device
limits per controller and team are unchanged, and all devices count toward these maximums (e.g., an MSM760 could manage
200 MSM317 devices with no additional AP license; or 40 APs and 160 MSM317 devices with no additional AP license; or 80 APs
and 120 MSM317 devices with an additional 40-AP license.

RFC support

refer to the "Mobility Products Specification Sheet" for a list of RFCs and other industry standards supported by the MSM
solution at

http://h17007.www1.hp.com/docs/mobility/4AA3-3883ENW.pdf

Warranty and support

Lifetime hardware warranty

for the MSM720 and MSM765 zl controllers, for as long as you own the product, with next-business-day advance replacement
(available in most countries); the hard disk drive in the MSM765 zl controller has a 5-year limited warranty†

Hardware warranty

1-year warranty for the MSM760 controller

Software releases and warranty

the MSM720 controller includes all offered software releases for as long as you own the product; the MSM765 zl and MSM760
controllers include 1 year of bug fixes; for details on the software releases available with your product purchase, refer to

www.hp.com/networking/warrantysummary

; to find software for your product, refer to

www.hp.com/networking/support

Electronic and telephone support

QuickSpecs

HP MSM Controller Series

Overview

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 6

limited electronic and telephone support is available from HP; to reach our support centers, refer to

www.hp.com/networking/contact-support

; the MSM720 controller includes technical support for as long as you own the
product; the MSM765 zl and MSM760 controllers include technical support for 1 year; for details on the duration of support
provided with your product purchase, refer to

www.hp.com/networking/warrantysummary

†HP warranty includes repair or replacement of hardware for as long as you own the product, with next business day advance
replacement (available in most countries). The disk drive included with HP AllianceOne
Advanced Services and Services zl Modules, HP Threat Management Services zl Module, HP AllianceOne Extended zl Module with
Riverbed Steelhead, HP MSM765zl Mobility Controller and HP Survivable Branch
Communication zl Module powered by Microsoft® Lync has a five-year hardware warranty. For details, refer to the Software license and
hardware warranty statements at

www.hp.com/networking/warranty

.

QuickSpecs

HP MSM Controller Series

Overview

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 7

Build To Order:

BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.

HP MSM720 Access Controller (WW)

J9693A

4 RJ-45 autosensing 10/100/1000 port
2 RJ-45 dual-personality 10/100/1000 ports/ SFP Ports

See

Configuration

Note:1, 2

HP MSM720 Premium Mobility Controller (WW)

J9694A

4 RJ-45 autosensing 10/100/1000 port
2 RJ-45 dual-personality 10/100/1000 ports/ SFP Ports

See

Configuration

Note:1, 2

HP MSM720 TAA Access Controller

J9695A

4 RJ-45 autosensing 10/100/1000 port
2 RJ-45 dual-personality 10/100/1000 ports/ SFP Ports

See

Configuration

Note:1, 2

HP MSM720 TAA Premium Mobility Controller

J9696A

4 RJ-45 autosensing 10/100/1000 port
2 RJ-45 dual-personality 10/100/1000 ports/ SFP Ports

See

Configuration

Note:1, 2

HP MSM760 Premium Mobility Controller

J9420A

2 RJ-45 autosensing 10/100/1000 ports

See

Configuration

Note:2

HP MSM760 Access Controller

J9421A

2 RJ-45 autosensing 10/100/1000 ports

See

Configuration

Note:2

HP MSM765 zl Premium Mobility Controller

J9370A

See

Configuration

Note:2

HP MSM775 zl Premium Controller Module

J9840A

Configuration Rules:

Note 1

The following Transceivers install into this Controller:
J9054C - HP X111 100M SFP LC FX Transceiver
J9099B - HP X112 100M SFP LC BX-D Transceiver
J9100B - HP X112 100M SFP LC BX-U Transceiver
J4860C - HP X121 1G SFP LC LH Transceiver

QuickSpecs

HP MSM Controller Series

Configuration

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 8

J4858C - HP X121 1G SFP LC SX Transceiver
J4859C - HP X121 1G SFP LC LX Transceiver
J9142B - HP X122 1G SFP LC BX-D Transceiver
J9143B - HP X122 1G SFP LC BX-U Transceiver

Note 2

Localization required. (See Localization Menu)

Remarks:

The TAA skus in the MSM 700 Controller are WW available.

Internal Power Supplies

None

Transceivers

SFP Transceivers

HP X111 100M SFP LC FX Transceiver

J9054C

HP X112 100M SFP LC BX-D Transceiver

J9099B

HP X112 100M SFP LC BX-U Transceiver

J9100B

HP X121 1G SFP LC LH Transceiver

J4860C

HP X121 1G SFP LC LX Transceiver

J4859C

HP X121 1G SFP LC SX Transceiver

J4858C

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

Access Point Options

External Power Supplies

HP 1-port Power Injector

J9407B

See

Configuration

Note:1

Configuration Rules:

Note 1

Localization required. (See Localization Menu)

Licenses

HP MSM720/760/765 Additional 10 Access Point License

J9697A

See

Configuration

Note:1

HP MSM720/760/765/800 Add 10 AP E-LTU

J9697AAE

See

Configuration

Note:1

HP MSM720 Premium Mobility License

J9698A

QuickSpecs

HP MSM Controller Series

Configuration

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 9

See

Configuration

Note:2

MSM720 Premium E-LTU

J9698AAE

See

Configuration

Note:2

HP MSM760/765 Additional 40 AP License

J9371A

See

Configuration

Note:3

HP MSM760/765/800 Add 40 AP E-LTU

J9371AAE

See

Configuration

Note:3

HP MSM760 Premium Mobility License

J9491A

See

Configuration

Note:5

HP MSM760 Premium E-LTU

J9491AAE

See

Configuration

Note:5

Configuration Rules

Note 1

This license is supported the following Controllers:
J9694A - HP MSM720 Premium Mobility Controller(WW)
J9420A - HP MSM760 Premium Mobility Controller
J9370A - HP MSM765 zl Premium Mobility Controller
J9840A - HP MSM775- zl Premium Controller Module
J9693A - HP MSM720 Access Controller (WW)
J9696A - HP MSM720 TAA Premium Mobility Controller
J9695A - HP MSM720 TAA Access Controller

Note 2

This license is supported the following Controllers:
J9693A - HP MSM720 Access Controller (WW)
J9695A - HP MSM720 TAA Access Controller

QuickSpecs

HP MSM Controller Series

Configuration

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 10

Note 3

This license is supported the following Controllers:
J9420A - HP MSM760 Premium Mobility Controller
J9370A - HP MSM765 zl Premium Mobility Controller
J9840A - HP MSM775- zl Premium Controller Module
J9421A - HP MSM760 Access Controller

Note 5

This license is supported the following Controllers:
J9421A - HP MSM760 Access Controller

Mounting Kit

HP MSM710 Controller Rack Mounting Kit

J9404A

See

Configuration

Note:1
Configuration Rules
Note 1

If this Mounting Kit is select then one of the following Access Points is
required:
J9325A - HP MSM710 Mobility Controller
J9328A - HP MSM710 Access Controller

QuickSpecs

HP MSM Controller Series

Configuration

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 11

HP MSM720 Premium Mobility Controller (WW)

(J9694A)

HP MSM720 TAA Premium Mobility Controller

(J9696A)

Ports

4 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE

802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
2 RJ-45 dual-personality 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,

IEEE 802.3ab Type 1000BASE-T)
1 RJ-45 serial console port

Physical characteristics

Dimensions

6.28(w) x 10(d) x 1.75(h) in (15.95 x 25.4 x 4.45 cm)

Weight

3.62 lb (1.64 kg)

Mounting

Supports the mounting options of the 2520-8 PoE switch, including EIA-standard 19 in. telco rack or
equipment cabinet (rack-mounting kit included); horizontal surface or wall mounting

Performance

100 Mb Latency

< 20.4 µs (LIFO 64-byte packets)

1000 Mb Latency

< 6.3 µs (LIFO 64-byte packets)

Throughput

up to 8.9 million pps

Environment

Operating temperature

41°F to 113°F (5°C to 45°C)

Operating relative
humidity

15% to 95% @ 104°F (40°C)

Nonoperating/Storage
temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage
relative humidity

15% to 95% @ 149°F (65°C)

Electrical characteristics

Frequency

50/60 Hz

Maximum heat
dissipation

70 BTU/hr (73.85 kJ/hr)

Voltage

100-240 VAC

Current

.2/.1 A

Maximum power rating

20 W

Safety

UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1

Emissions

FCC part 15 Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003

Features

Supported

IEEE 802.11 n/a/b/g access points and/or access devices
10 to 40 access points and/or access devices (in increments of 10)
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
250 simultaneous guest access users

Included services

Plug-and-play AP management and WLAN management
Guest access
Captive portal
PCI DSS compliance for wireless PoS traffic
Support for Real-Time Location Services (RTLS)
Advanced fast roaming with VoWLAN support

QuickSpecs

HP MSM Controller Series

Technical Specifications

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 12

Mobility Traffic Manager (MTM)
Support for up to 64 VSC profiles
Unified policy enforcement and network visibility
Virtual controller (up to two MSM720 controllers and 40 APs with resiliency)

Notes

Latency values refer to client traffic bridged locally at the AP.
For U.S. government manufactured sales requirements, order the TAA MSM720 controller models. For all
other AMS and WW orders, use WW models.

Services

Refer to the HP website at:

www.hp.com/networking/services

for details on the service-level
descriptions and product numbers. For details about services and response times in your area, please
contact your local HP sales office.

HP MSM720 Access Controller (WW)

(J9693A)

HP MSM720 TAA Access Controller

(J9695A)

Ports

4 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE

802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
2 RJ-45 dual-personality 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,

IEEE 802.3ab Type 1000BASE-T)
1 RJ-45 serial console port

Physical characteristics

Dimensions

6.28(w) x 10(d) x 1.75(h) in (15.95 x 25.4 x 4.45 cm)

Weight

3.62 lb (1.64 kg)

Mounting

Supports the mounting options of the 2520-8 PoE switch, including EIA-standard 19 in. telco rack or
equipment cabinet (rack-mounting kit included); horizontal surface or wall mounting

Performance

100 Mb Latency

< 20.4 µs (LIFO 64-byte packets)

1000 Mb Latency

< 6.3 µs (LIFO 64-byte packets)

Throughput

up to 8.9 million pps

Environment

Operating temperature

41°F to 113°F (5°C to 45°C)

Operating relative
humidity

15% to 95% @ 104°F (40°C)

Nonoperating/Storage
temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage
relative humidity

15% to 95% @ 149°F (65°C)

Electrical characteristics

Frequency

50/60 Hz

Maximum heat
dissipation

70 BTU/hr (73.85 kJ/hr)

Voltage

100-240 VAC

Current

.2/.1 A

Maximum power rating

20 W

Safety

UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1

Emissions

FCC part 15 Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003

Features

Supported

IEEE 802.11 n/a/b/g access points and/or access devices

QuickSpecs

HP MSM Controller Series

Technical Specifications

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 13

10 to 40 access points and/or access devices (in increments of 10)
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
250 simultaneous guest access users

Included services

Plug-and-play AP management and WLAN management
Guest access
Captive portal
PCI DSS compliance for wireless PoS traffic
Support for Real-Time Location Services (RTLS)
Standard Layer 2 roaming with VoWLAN support
Support for up to 16 VSC profiles
Unified policy enforcement and network visibility

Notes

Latency values refer to client traffic bridged locally at the AP.
For U.S. government manufactured sales requirements, order the TAA MSM720 controller models. For all
other AMS and WW orders, use WW models.

Services

Refer to the HP website at:

www.hp.com/networking/services

for details on the service-level
descriptions and product numbers. For details about services and response times in your area, please
contact your local HP sales office.

HP MSM760 Premium Mobility Controller

(J9420A)

Ports

2 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE

802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

1 RJ-45 serial console port

Physical characteristics

Dimensions

17.32(w) x 15.38(d) x 1.75(h) in (43.99 x 39.07 x 4.45 cm) (1U height)

Weight

13.45 lb (6.1 kg)

Mounting

Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface
mounting only

Environment

Operating temperature

41°F to 104°F (5°C to 40°C)

Operating relative
humidity

15% to 80%, noncondensing

Nonoperating/Storage
temperature

-40°F to 149°F (-40°C to 65°C)

Nonoperating/Storage
relative humidity

15% to 80%, noncondensing

Electrical characteristics

Frequency

50/60 Hz

Maximum heat
dissipation

434 BTU/hr (457.87 kJ/hr)

Voltage

100-240 VAC

Current

2/1 A

Maximum power rating

127 W

Safety

UL 60950-1; CAN/CSA 22.2 No. 60950-1; IEC 60950-1; EN 60950-1

Emissions

FCC part 15 Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003

QuickSpecs

HP MSM Controller Series

Technical Specifications

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 14

Features

Supported

IEEE 802.11 n/a/b/g access points and/or access devices
40 to 200 access points and/or access devices (in increments of 10 or 40)
MSM firmware releases prior to MSM v5.7: 1,000 simultaneous guest access users upgradable in
increments of 250 per 40-AP license pack, up to a maximum of 2,000 guest access users Unlimited
simultaneous users
MSM v5.7 and later: 2,000 simultaneous guest access users with base product

Included services

Plug-and-play AP management and WLAN management
Guest access
Captive portal
PCI DSS compliance for wireless PoS traffic
Support for Real-Time Location Services (RTLS)
Advanced fast roaming with VoWLAN support
Mobility Traffic Manager (MTM)
Support for up to 64 VSC profiles
Unified policy enforcement and network visibility
Virtual controller (up to five MSM765 zl controllers and 800 APs with resiliency)

Services

3-year, parts only, global next-day advance exchange (UQ652E)
3-year, 4-hour onsite, 13x5 coverage for hardware (UQ653E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UQ654E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UQ656E)
3-Year, 9x5 SW phone support, software updates (UQ615E)
3-year, 24x7 SW phone support, software updates (UQ616E)
1-year, post-warranty, parts only, global next-day advance exchange (UQ657PE)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (UQ658PE)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (UQ659PE)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(UQ661PE)
Refer to the HP website at:

www.hp.com/networking/services

for details on the service-level
descriptions and product numbers. For details about services and response times in your area, please
contact your local HP sales office.

HP MSM760 Access Controller

(J9421A)

Ports

2 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T:
full only

1 RJ-45 serial console port

Physical characteristics

Dimensions

17.32(w) x 15.38(d) x 1.75(h) in (43.99 x 39.07 x 4.45 cm) (1U height)

Weight

13.45 lb (6.1 kg)

Mounting

Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface
mounting only

QuickSpecs

HP MSM Controller Series

Technical Specifications

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 15

Environment

Operating temperature

41°F to 104°F (5°C to 40°C)

Operating relative
humidity

15% to 80%, noncondensing

Nonoperating/Storage
temperature

-40°F to 149°F (-40°C to 65°C)

Nonoperating/Storage
relative humidity

15% to 80%, noncondensing

Electrical characteristics

Frequency

50/60 Hz

Maximum heat dissipation

434 BTU/hr (457.87 kJ/hr)

Voltage

100-240 VAC

Current

2/1 A

Maximum power rating

127 W

Safety

UL 60950-1; CAN/CSA 22.2 No. 60950-1; IEC 60950-1; EN 60950-1

Emissions

FCC part 15 Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003

Features

Supported

IEEE 802.11 n/a/b/g access points and/or access devices
40 to 200 access points and/or access devices (in increments of 10 or 40)
MSM firmware releases prior to MSM v5.7: 1,000 simultaneous guest access users upgradable in
increments of 250 per 40-AP license pack, up to a maximum of 2,000 guest access users
MSM v5.7 and later: 2,000 simultaneous guest access users with base product

Included services

Plug-and-play AP management and WLAN management
Guest access
Captive portal
PCI DSS compliance for wireless PoS traffic
Support for Real-Time Location Services (RTLS)
Standard Layer 2 roaming with VoWLAN support
Support for up to 16 VSC profiles
Unified policy enforcement and network visibility

Services

3-year, parts only, global next-day advance exchange (UQ652E)
3-year, 4-hour onsite, 13x5 coverage for hardware (UQ653E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UQ654E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UQ655E)
3-Year, 9x5 SW phone support, software updates (UQ613E)
3-year, 24x7 SW phone support, software updates (UQ614E)
1-year, post-warranty, parts only, global next-day advance exchange (UQ657PE)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (UQ658PE)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (UQ659PE)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(UQ660PE)
3 Yr 6 hr Call-to-Repair Onsite (UW317E)

Refer to the HP website at:

www.hp.com/networking/services

for details on the service-level
descriptions and product numbers. For details about services and response times in your area, please

QuickSpecs

HP MSM Controller Series

Technical Specifications

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 16

contact your local HP sales office.

HP MSM765 zl Premium Mobility Controller

(J9370A)

Physical characteristics

Dimensions

8.13(w) x 10.3(d) x 1.75(h) in (20.65 x 26.16 x 4.45 cm)

Weight

2.05 lb (0.93 kg)

Mounting

Can be installed in any of the following chassis: HP 5406 zl (J8697A), 5412 zl (J8698A),
and 8212 zl (J8715A)

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative
humidity

15% to 95% @ 131°F (55°C), noncondensing

Nonoperating/Storage
temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage
relative humidity

15% to 95%, noncondensing

Electrical characteristics

Frequency

50/60 Hz

Maximum heat
dissipation

272 BTU/hr (287 kJ/hr)

Voltage

100-240 VAC

Current

1.0/0.4 A

Maximum power rating

80 W

Safety

UL 60950-1; CAN/CSA 22.2 No. 60950-1; IEC 60950-1; EN 60950-1

Emissions

FCC part 15 Class A; EN 55022 Class A; CISPR 22 Class A; ICES-003

Features

Supported

IEEE 802.11 n/a/b/g access points and/or access devices
40 to 200 (in increments of 40) access points and/or access devices
Unlimited simultaneous users
1000 simultaneous guest access users upgradable in increments of 250 per 40 license pack, up to a
maximum of 2000 supported users

Included services

Plug-and-play AP management and WLAN management
Guest access
Captive portal
PCI DSS compliance for wireless PoS traffic
Support for Real-Time Location Services (RTLS)
Advanced fast roaming with VoWLAN support
Mobility Traffic Manager (MTM)
Support for up to 64 VSC profiles
Unified policy enforcement and network visibility
Virtual controller (up to five MSM765 zl controllers and 800 APs with resiliency)

Notes

A maximum of four MSM765 zl controllers can be installed in the same chassis, and a maximum of three
MSM765 zl controllers are supported in the 5406 zl switch.

Services

3-year, 4-hour onsite, 13x5 coverage for hardware (UQ601E)

QuickSpecs

HP MSM Controller Series

Technical Specifications

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 17

3-year, 4-hour onsite, 24x7 coverage for hardware (UQ602E)
3-year, 4-hour onsite, 24x7 coverage for hardware,
24x7 SW phone support and SW updates (UQ604E)
3-Year, 9x5 SW phone support, software updates (UQ617E)
3-year, 24x7 SW phone support, software updates (UQ618E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HS511E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HS512E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HS513E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UQ605E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UQ606E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UQ608E)
4-year, 24x7 SW phone support, software updates (UQ607E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UQ609E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UQ610E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UQ612E)
5-year, 24x7 SW phone support, software updates (UQ611E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HS515E)
1-year, 24x7 software phone support, software updates (HS514E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HV086E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HV087E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HV088E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HV089E)
4-year, 24x7 software phone support, softwareupdates + Next Business Day Hardware Exchange
(HV090E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HV091E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HV092E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HV093E)

Refer to the HP website at:

www.hp.com/networking/services

for details on the service-level
descriptions and product numbers. For details about services and response times in your area, please
contact your local HP sales office.

QuickSpecs

HP MSM Controller Series

Technical Specifications

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 18

HP MSM Controller Series accessories

HP MSM720 Premium
Mobility Controller
(WW) (J9694A)

HP X121 1G SFP LC SX Transceiver

J4858C

HP X121 1G SFP LC LX Transceiver

J4859C

HP X121 1G SFP LC LH Transceiver

J4860C

HP X111 100M SFP LC FX Transceiver

J9054C

HP X112 100M SFP LC BX-D Transceiver

J9099B

HP X112 100M SFP LC BX-U Transceiver

J9100B

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

HP MSM720/760/765 Additional 10 Access Point License

J9697A

HP MSM720/760/765 additional 10 Access Point E-LTU

J9697AAE

HP MSM720 Access
Controller (WW)
(J9693A)

HP X121 1G SFP LC SX Transceiver

J4858C

HP X121 1G SFP LC LX Transceiver

J4859C

HP X121 1G SFP LC LH Transceiver

J4860C

HP X111 100M SFP LC FX Transceiver

J9054C

HP X112 100M SFP LC BX-D Transceiver

J9099B

HP X112 100M SFP LC BX-U Transceiver

J9100B

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

HP MSM720/760/765 Additional 10 Access Point License

J9697A

HP MSM720 Premium Mobility License

J9698A

HP MSM720/760/765 additional 10 Access Point E-LTU

J9697AAE

HP MSM720 Premium E-LTU

J9698AAE

HP MSM720 TAA Access
Controller
(J9695A)

HP X121 1G SFP LC SX Transceiver

J4858C

HP X121 1G SFP LC LX Transceiver

J4859C

HP X121 1G SFP LC LH Transceiver

J4860C

HP X121 1G SFP RJ45 T Transceiver

J8177C

HP X111 100M SFP LC FX Transceiver

J9054C

HP X112 100M SFP LC BX-D Transceiver

J9099B

HP X112 100M SFP LC BX-U Transceiver

J9100B

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

HP MSM720/760/765 Additional 10 Access Point License

J9697A

HP MSM720 Premium Mobility License

J9698A

HP MSM720/760/765 additional 10 Access Point E-LTU

J9697AAE

HP MSM720 Premium E-LTU

J9698AAE

HP MSM720 TAA Premium
Mobility
Controller (J9696A)

HP X121 1G SFP LC SX Transceiver

J4858C

HP X121 1G SFP LC LX Transceiver

J4859C

HP X121 1G SFP LC LH Transceiver

J4860C

HP X121 1G SFP RJ45 T Transceiver

J8177C

HP X111 100M SFP LC FX Transceiver

J9054C

QuickSpecs

HP MSM Controller Series

Accessories

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 19

HP X112 100M SFP LC BX-D Transceiver

J9099B

HP X112 100M SFP LC BX-U Transceiver

J9100B

HP X122 1G SFP LC BX-D Transceiver

J9142B

HP X122 1G SFP LC BX-U Transceiver

J9143B

HP MSM720/760/765 Additional 10 Access Point License

J9697A

HP MSM720/760/765 additional 10 Access Point E-LTU

J9697AAE

HP MSM760 Premium
Mobility Controller
(J9420A)

HP MSM760/765 Additional 40 Access Point License

J9371A

HP MSM720/760/765 Additional 10 Access Point License

J9697A

HP MSM720/760/765 additional 10 Access Point E-LTU

J9697AAE

NEW HP MSM760/765 additional 40 Access Point E-LTU

J9371AAE

HP MSM760 Access
Controller (J9421A)

HP MSM720/760/765 Additional 10 Access Point License

J9697A

HP MSM760/765 Additional 40 Access Point License

J9371A

HP MSM760 Premium Mobility License

J9491A

HP MSM720/760/765 additional 10 Access Point E-LTU

J9697AAE

NEW HP MSM760/765 additional 40 Access Point E-LTU

J9371AAE

HP MSM760 Premium E-LTU

J9491AAE

HP MSM765 zl Premium
Mobility Controller
(J9370A)

HP MSM760/765 Additional 40 Access Point License

J9371A

HP MSM720/760/765 Additional 10 Access Point License

J9697A

HP MSM720/760/765 additional 10 Access Point E-LTU

J9697AAE

NEW HP MSM760/765 additional 40 Access Point E-LTU

J9371AAE

QuickSpecs

HP MSM Controller Series

Accessories

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 20

HP X121 1G SFP LC SX
Transceiver

(J4858C)

A small form-factor
pluggable (SFP) Gigabit SX
transceiver that provides a
full-duplex Gigabit solution
up to 550 m on multimode
fiber.

Ports

1 LC 1000BASE-SX port; Duplex: full only

Physical characteristics

Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 5% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 0.4 W
Power consumption maximum: 0.7 W

Cabling

Type:

62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low
metal content, multimode fiber optic, complying with ITU-T G.651 and
ISO/IEC 793-2 Type A1b or A1a, respectively;

Maximum distance:

2-220 m (62.5 µm core diameter, 160 MHz*km bandwidth
2-275 m (62.5 µm core diameter, 200 MHz*km bandwidth
2-500 m (50 µm core diameter, 400 MHz*km bandwidth)

2-550 m (50 µm core diameter, 500 MHz*km bandwidth)
Cable length: 2-550m
Fiber type: Multi Mode

Services

Refer to the HP website at

www.hp.com/networking/services

for details on the
service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local HP sales office.

HP X121 1G SFP LC LX
Transceiver

(J4859C)

HP X121 1G SFP LC LX
Transceiver: An SFP format
gigabit transceiver with LC
connectors using LX
technology.

Ports

1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX); Duplex: full only

Physical characteristics

Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm)
Weight:0.04 lb. (0.02 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
Operating relative humidity: 0% to 85%, noncondensing
Nonoperating/Storage temperature: -40°F to 212°F (-40°C to 100°C)
Altitude: up to 10,000 ft. (3 km)

Cabling

Type:

Either single mode or multimode; 62.5/125 µm or 50/125 µm
(core/cladding) diameter, graded-index, low metal content, multimode
fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2 Type A1b or
A1a, respectively; Low metal content, single-mode fiber-optic,
complying with ITU-T G.652 and ISO/IEC 793-2 Type B1;

Maximum distance:

2-550 m (multimode 62.5 µm core diameter, 500 MHz*km bandwidth)
2-550 m (multimode 50 µm core diameter, 400 MHz*km bandwidth)
2-550 m (multimode 50 µm core diameter, 500 MHz*km bandwidth)

QuickSpecs

HP MSM Controller Series

Accessory Product Details

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 21

2-10,000 m (single-mode fiber)

Notes

A mode conditioning patch cord may be needed in some multimode fiber
installations.
Wavelength: 1310nm
Power Consumption: < 500mW Typical

Services

Refer to the HP website at

www.hp.com/networking/services

for details on the
service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local HP sales office.

HP X121 1G SFP LC LH
Transceiver

(J4860C)

A small form-factor
pluggable (SFP) Gigabit LH
transceiver that provides a
full-duplex Gigabit solution
up to 70 km on single­mode fiber.

Ports

1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics); Duplex:
full only

Physical characteristics

Dimensions: 2.17(d) x 0.60(w) x 0.46(h) in. (5.5 x 1.53 x 1.18 cm)
Weight: 0.04 lb. (0.02 kg)

Environment

Operating temperature: -40°F to 185°F (-40°C to 85°C)
Operating relative humidity: 0% to 95% @ 77°F (25°C), noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Altitude: up to 10,000 ft. (3 km)

Cabling

Cable type:

Low metal content, single-mode fiber-optic, complying with ITU-T
G.652 and ISO/IEC 793-2 Type B1;

Maximum distance:

10-70,000 m (single-mode fiber)

Notes

Power consumption is 0.8 watts typical with 1 watt maximum at 100%
utilization.
For distances less than 20 km, a 10 dB attenuator must be used.
For distances between 20 km and 40 km, a 5 dB attenuator must be used.
Attenuators can be purchased from most cable vendors.

Services

Refer to the HP website at

www.hp.com/networking/services

for details on the
service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local HP sales office.

QuickSpecs

HP MSM Controller Series

Accessory Product Details

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 22

HP X111 100M SFP LC FX
Transceiver

(J9054C)

Ports

1 LC 100BASE-FX port (IEEE 802.3u Type 100BASE-FX); Duplex: half or full

Physical characteristics

Dimensions

2.7(d) x 0.54(w) x 0.48(h) in. (6.86 x 1.38 x 1.22
cm)

Weight

0.06 lb. (0.03 kg)

Environment

Operating temperature

32°F to 158°F (0°C to 70°C)

Operating relative
humidity

5% to 95%

Nonoperating/Storage
temperature

-40°F to 185°F (-40°C to 85°C)

Nonoperating/Storage
relative humidity

5% to 85%

Altitude

up to 10,000 ft. (3 km)

Cabling

Cable type:

62.5/125 ìm or 50/125 ìm (core/cladding) diameter, graded-index, low metal
content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC 793-2
Type A1b or A1a, respectively;
Maximum distance:

• 2 km (full duplex) or 412 m (half duplex)

Notes

Transmitter wavelength: 1310nm
Power consumption is 1.1 watt maximum.
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the J9054B 100-FX SFP-LC
Transceiver" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.

Services

Refer to the HP website at:

www.hp.com/networking/services

for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.

HP X112 100M SFP LC BX-D
Transceiver

(J9099B)

A small form-factor
pluggable (SFP) 100­Megabit BX (bi-directional)
"downstream" transceiver
that provides 100 Mbps
full-duplex connectivity up
to 10 km on one strand of
singlemode fiber. The
J9099B connects to the
J9100B "upstream"
transceiver, or to any IEEE­standard 100BASE-BX10-U
("upstream") device.

Ports

1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-D); Duplex: full
only

Physical characteristics

Dimensions

2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x 1.22
cm)

Weight

0.04 lb. (0.03 kg)

Environment

Operating temperature

32ºF to 158ºF (0ºC to 70ºC)

Operating relative
humidity

0% to 95%, noncondensing

Nonoperating/Storage
temperature

-40ºF to 185ºF (-40ºC to 85ºC)

Cabling

Type:

Single-mode fiber optic, complying with ITU-T G.652;

Maximum distance:

0.5-10,000 m (single-mode fiber)

Notes

Transmit wavelength: 1550 nm. Receive wavelength: 1310 nm.

QuickSpecs

HP MSM Controller Series

Accessory Product Details

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 23

Power consumption is 1.1 watt maximum.
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the HP BX Transceivers" on the
"HP Mini-GBICs and SFPs" Manuals Web page.
The J9099B connects to the J9100B "upstream" transceiver, or to any IEEE­standard 100BASE-BX10-U ("upstream") device. (A 100-BX-D transceiver can
only connect to a 100-BX-U product. You cannot connect two 100-BX-D
transceivers together.)

Services

Refer to the HP website at

www.hp.com/networking/services

for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.

HP X112 100M SFP LC BX-U
Transceiver

(J9100B)

A small form-factor
pluggable (SFP) 100­Megabit BX (bi-directional)
"upstream" transceiver
that provides 100 Mbps
full-duplex connectivity up
to 10 km on one strand of
singlemode fiber. The
J9100B connects to the
J9099B "downstream"
transceiver, or to any IEEE­standard 100BASE-BX10-D
("downstream")
device.

Ports

1 LC 100BASE-BX10 port (IEEE 802.3ah Type 100BASE-BX10-U); Duplex: full
only

Physical characteristics

Dimensions

2.7(d) x 0.55(w) x 0.48(h) in. (6.86 x 1.39 x 1.22
cm)

Weight

0.07 lb. (.03 kg)

Environment

Operating temperature

32ºF to 158ºF (0ºC to 70ºC)

Operating relative
humidity

0% to 95%, noncondensing

Nonoperating/Storage
temperature

-40ºF to 185ºF (-40ºC to 85ºC)

Cabling

Type:

Single-mode fiber optic, complying with ITU-T G.652;

Maximum distance:

0.5-10,000 m (single-mode fiber)

Notes

For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the HP BX Transceivers" on the
"HP Mini-GBICs and SFPs" Manuals Web page.
The J9100B connects to the J9099B "downstream" transceiver, or to any IEEE­standard 100BASE-BX10- D ("downstream") device. (A 100-BX-U transceiver
can only connect to a 100-BX-D product. You cannot connect two 100-BX-U
transceivers together.)
Transmit wavelength: 1310 nm. Receive wavelength: 1550 nm.
Power consumption is 1.1 watts maximum.

Services

Refer to the HP website at

www.hp.com/networking/services

for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.

QuickSpecs

HP MSM Controller Series

Accessory Product Details

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 24

HP X122 1G SFP LC BX-D
Transceiver

(J9142B)

A small form-factor
pluggable (SFP) Gigabit-BX
(bi-directional)
"downstream" transceiver
that provides a full-duplex
Gigabit solution up to 10
km on one strand of
single-mode fiber. The
J9142B connects to the
J9143B "upstream"
transceiver, or to any IEEE­standard 1000BASE-BX10­U ("upstream") device.

Ports

1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-D); Duplex:
full only

Physical characteristics

Dimensions

2.19(d) x 0.54(w) x 0.46(h) in. (5.57 x 1.37 x 1.18
cm)

Weight

0.04 lb. (0.02 kg)

Environment

Operating temperature

32ºF to 158ºF (0ºC to 70ºC)

Operating relative
humidity

0% to 95%, non-condensing

Non-operating/
Storage temperature

–40ºF to 185ºF –40ºC to 85ºC)

Cabling

Type:
Single-mode fiber optic, complying with ITU-T G.652;

Maximum distance:

0.5-10,000 m (single-mode fiber)

Notes

Transmit wavelength: 1490 nm. Receive wavelength: 1310 nm.
Power consumption is 1 watt maximum.
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the HP BX Transceivers" on the
"HP Mini-GBICs and SFPs" Manuals Web page.
The J9142B connects to the J9143B "upstream" transceiver, or to any IEEE­standard 1000BASE-BX10-U ("upstream") device. (A 1000-BX-D transceiver
can only connect to a 1000-BX-U product. You cannot connect two 1000-BX-D
transceivers together.)

Services

Refer to the HP website at:

www.hp.com/networking/services

for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.

HP X122 1G SFP LC BX-U
Transceiver

(J9143B)

A small form-factor
pluggable (SFP) Gigabit-BX
(bi-directional) "upstream"
transceiver that provides a
full-duplex Gigabit solution
up to 10 km on one strand
of single-mode fiber. The
J9143B connects to the
J9142B "downstream"
transceiver, or to any IEEE­standard 1000BASE-BX10­D ("downstream")
device.

Ports

1 LC 1000BASE-BX10 port (IEEE 802.3ah Type 1000BASE-BX10-U); Duplex:
full only

Physical characteristics

Dimensions

2.19(d) x 0.54(w) x 0.46(h) in. (5.57 x 1.37 x 1.18
cm)

Weight

0.04 lb. (0.02 kg)

Environment

Operating temperature

32ºF to 158ºF (0ºC to 70ºC)

Operating relative
humidity

0% to 95%, non-condensing

Non-operating/
Storage temperature

–40ºF to 185ºF –40ºC to 85ºC)

Cabling

Type:
Single-mode fiber optic, complying with ITU-T G.652;

Maximum distance:

0.5-10,000 m (single-mode fiber)

Notes

Transmit wavelength: 1310 nm. Receive wavelength: 1490 nm.

QuickSpecs

HP MSM Controller Series

Accessory Product Details

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 25

For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the HP BX Transceivers" on the
"HP Mini-GBICs and SFPs" Manuals Web page.
The J9143B connects to the J9142B "downstream" transceiver, or to any IEEE­standard 1000BASE-BX10-D ("downstream") device. (A 1000-BX-U
transceiver can only connect to a 1000-BX-D product. You cannot connect two
1000-BX-U transceivers together.)
Power consumption is 1 watt maximum.

Services

Refer to the HP website at:

www.hp.com/networking/services

for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.

HP 1-port Power Injector

(J9407B)

Physical characteristics

Dimensions

5.71(d) x 2.36(w) x 1.22(h) in. (14.5 x 6 x 3.1 cm)

Weight

1 lb. (0.45 kg)

Environment

Operating temperature

32°F to 104°F (0°C to 40°C)

Operating relative
humidity

5% to 93%, noncondensing

Nonoperating/Storage
temperature

-4°F to 158°F (-20°C to 70°C)

Nonoperating/Storage
relative humidity

5% to 95%, noncondensing

Altitude

up to 10,000 ft. (3 km)

Electrical characteristics

Voltage

100-240 VAC

Current

0.3/0.2 A

Frequency

50/60 Hz

Notes

IEEE 802.3af compliant

Safety

UL 60950; EN 60950

Emissions

EN 55024; EN 55022 (CISPR 22) Class B with FTP Cabling; FCC Part 15, Class B
with FTP cabling

Notes

The 1-port power converter has 1 AC power cord input, 1 RJ-45 10/100/1000
Mbps port for data coming from the network infrastructure, and 1 RJ-45 for
data plus IEEE 802.3af-compliant PoE for Gigabit Ethernet to power the
access point.

Services

Refer to the HP website at:

www.hp.com/networking/services

for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.

QuickSpecs

HP MSM Controller Series

Accessory Product Details

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 26

HP X121 1G SFP RJ45 T
Transceiver

(J8177C)

HP X121 1G SFP RJ45 T
Transceiver: An SFP format
gigabit transceiver with
RJ45 connectors using
1000BaseT technology.

Ports

1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T); Duplex: full only

Physical characteristics

Dimensions: 2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4 cm)
Weight: 0.06 lb. (0.03 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C); with 100 LFM airflow over
the SFP module)

Operating relative humidity: 0% to 95% @ 75°F (25°C), noncondensing
Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)
Nonoperating/Storage relative humidity: 0% to 95% @ 77°F (25°C),

noncondensing
Altitude: up to 10,000 ft. (3000 km)

Cabling

Cable type:
1000BASE-T: Category 5 (5E or better recommended), 100 Ù differential 4-pair
unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced,
complying with IEEE 802.3ab 1000BASE-T;
Maximum distance:

• 100 m

Notes

Power consumption is nominally 1 watt.
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the J8177C 1000Base-T Mini­GBIC" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.
The J8177C Gigabit copper mini-GBIC is not supported on dual-personality
ports.
The J8177C is capable of 100 Mb operation. This is supported on only the HP
ProCurve Switch 8200zl, 5400zl, and 6200yl Series using software version
K.12.21 or later. Use the "auto-100" port setting to enable 100 Mb operation.
Important: The earlier J8177B does not support 100 Mb operation.
When used in the ProCurve Switch gl 20-Port 10/100/1000 Module (J4908A),
the J8177C mini-GBIC can be installed in either the upper or lower mini-GBIC
port, but will block access to the other port.

Services

Refer to the HP website at

www.hp.com/networking/services

for details on the
service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local HP sales office.

To learn more, visit:

www.hp.com/networking

© Copyright 2008-2011,2013 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change
without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or
editorial errors or omissions contained herein.

Intel and Intel Core are trademarks of Intel Corporation in the U.S. and other countries. Microsoft is a U.S. registered trademark of
Microsoft Corporation.

QuickSpecs

HP MSM Controller Series

Accessory Product Details

DA - 13271 Worldwide — Version 18 — December 20, 2013

Page 27