Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation.
The information contained herein is subject to change without notice. The only warranties
for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as
constituting an additional warranty. HP shall not be liable for technical or editorial errors
or omissions contained herein.
Getting Started
HP Notebook Series
First Edition June 2005
Document Part Number: 394138-001
Installing a retail version of an operating system . . . . . . . . . . . . . B–8
Index
Getting Started iv
Install software
Software on optical discs (CDs and DVDs) is included with your notebook:
■ The discs packaged in the “Required for Setup” bag provide software
that is not preinstalled on your notebook. Depending on how you plan
to use your notebook, you may want to install some or all of these
applications. You can install this software at any time.
■ The discs packaged in a second bag are the recovery discs for software
that is preinstalled or preloaded on your notebook. The recovery discs
are provided in case you need to repair or reinstall preinstalled or
preloaded software.
❏ Operating system recovery and driver recovery software is included
with all notebook models.
❏ Application recovery software is provided with select models.
For information about accessing additional product documentation, refer
✎
to “Access your user guides,” later in this chapter.
Next steps
Getting Started 1
Next steps
Enable or disable TouchPad tapping
Tapping is a TouchPad preference that enables you to tap the TouchPad once
to select an item or twice to double-click an item. This feature is enabled by
default.
To disable or reenable TouchPad Tapping:
1. Use the TouchPad to select Start > Control Panel > Printers and Other Hardware > Mouse > Device Settings. Then select Settings.
2. Select Tapping. If the Enable Tapping check box is selected, TouchPad
Tapping is enabled.
❏ To disable TouchPad Tapping, clear the check box.
❏ To enable TouchPad Tapping, select the check box.
3. Select OK.
All Windows instructions in your user guides describe Microsoft®
✎
Windows® XP procedures based on the default Windows XP
category view.
To switch between category view and classic view within Control Panel:
» Select your preference in the Control Panel pane in the left panel of
the Control Panel window.
To get more information about Windows XP category view and
Windows XP classic view:
» Select Start > Help and Support > Customizing your computer > Files,
folders, and programs > Use Windows classic folders.
Getting Started 2
Protect your notebook
You can use the information in this section to
■ Protect your notebook from viruses.
■ Protect your system files.
■ Protect your privacy.
■ Protect your notebook from power surges.
■ Use your notebook safely.
■ Turn off your notebook properly.
Protect your notebook from viruses
When you use your notebook for e-mail, network, or Internet access, you
expose the notebook to computer viruses. Computer viruses can disable
your operating system, applications, or utilities, or cause them to function
abnormally.
Antivirus software can detect most viruses, destroy them, and, in most cases,
repair damage they have caused. To provide ongoing protection against
newly discovered viruses, antivirus software must be updated.
Next steps
Norton AntiVirus software is preinstalled on your notebook:
■ Your version of Norton AntiVirus software includes 60 days of free
updates. It is strongly recommended that you protect your notebook
against new viruses beyond 60 days by purchasing extended update
service.
■ Instructions for using and updating your Norton AntiVirus software
and for purchasing extended update service are provided within the
application.
■ To access your Norton AntiVirus software, select Start > All Programs >
Norton Internet Security.
Getting Started 3
Next steps
Protect your system files
System Restore is an operating system feature that enables you to undo
harmful changes to your notebook software by restoring your software to
an earlier time, called a restore point, when your software was functioning
optimally.
Manually setting additional restore points provides additional protection
for your system files and settings. It is recommended that you manually set
restore points
■ Before you add or extensively modify software or hardware.
■ Periodically, whenever the system is performing optimally.
For more information about setting, and restoring from, restore points, refer
to “Using System Restore” in Appendix B, “System recovery.”
Protect your privacy
When you use your notebook for e-mail, network, or Internet access, it is
possible for unauthorized persons to obtain information about your notebook
and your data.
To optimize the privacy protection features included with your notebook, it is
recommended that you
■ Keep your operating system updated. Many Windows updates contain
security enhancements. For information about updating your operating
system, refer to “Update your software,” later in this chapter, and also to
“Updating reinstalled software” in Appendix B, “System recovery.”
■ Use a firewall. A firewall is software that monitors incoming traffic on
your notebook. Some firewalls also monitor outgoing traffic.
Getting Started 4
Protect your notebook from power surges
To protect your notebook from the power surges that may be caused by an
uncertain power supply or an electrical storm:
■ Plug the notebook power cord into an optional, high-quality surge
protector. Surge protectors are available from most computer or
electronics retailers.
■ During an electrical storm, either run the notebook on battery power
or shut down the notebook and unplug the power cord.
■ If applicable to your location, provide surge protection on the cable that
connects the modem to a telephone line. Telephone line surge protectors
are available from computer or electronics retailers in some regions.
Next steps
Getting Started 5
Next steps
Use your notebook safely
WARNING: To reduce the risk of electric shock or damage to your equipment:
Å
■ Plug the power cord into an AC outlet that is easily accessible at all times.
■ Disconnect power from the notebook by unplugging the power cord from the
AC outlet (not by unplugging the power cord from the notebook).
■ If provided with a 3-pin attachment plug on your power cord, plug the cord into a
grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin; for
example, by attaching a 2-pin adapter. The grounding pin is an important safety
feature.
WARNING: To reduce the risk of serious injury, read the Safety and Comfort Guide.
Å
It describes proper workstation setup, and proper posture, health, and work habits
for notebook users. The Safety and Comfort Guide also provides important
electrical and mechanical safety information. This guide is available on the Web at
http://www.hp.com/ergo and through the Help and Support Center at Start > Help and
Support > User Guides.
WARNING: To avoid potential discomfort or burns, do not block the air vents or use the
Å
notebook on your lap for extended periods. The notebook is designed to run demanding
applications at full power. As a result of increased power consumption, it is normal for the
notebook to feel warm or hot when used continuously. The notebook complies with the
user-accessible surface temperature limits defined by the International Standard for Safety
of Information Technology Equipment (IEC 60950).
For more safety and regulatory information, refer to Regulatory and Safety
Notices by selecting Start > Help and Support > User Guides.
Getting Started 6
Turn off your notebook properly
Whenever possible, turn off the notebook by using the standard Windows
shutdown procedure for your operating system:
■ In Windows XP Home, select Start > Turn Off Computer > Turn Off.
■ In Windows XP Professional, select Start > Turn Off Computer > Shut
Down > OK. (If you connect your notebook to a network domain, the
name of the Turn Off Computer button may change to Shut Down.)
If the notebook does not respond, try the following shutdown procedures:
■ Press ctrl+alt+delete. Then
❏ If the notebook is running Windows XP Home, select Shut Down >
Turn Off.
❏ If the notebook is running Windows XP Professional, select
Shut Down from the drop-down list, and then select OK.
■ If the notebook does not respond to the ctrl+alt+delete procedure, press
and hold the power button for 5 seconds.
Next steps
Getting Started 7
Loading...
+ 24 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.