HP Kayak XW 04xx, Kayak XW 0480 Installation Manual

Mil_fx6.fm Page 1 Friday, February 26, 1999 8:46 AM

HP Kayak XW Series 0480 PC Workstation—

HP VISUALIZE fx6 Texture Module

Mil_fx6.fm Page 2 Friday, February 26, 1999 8:46 AM

HP Kayak XW Series 0480 PC Workstation — HP VISUALIZE fx6 Texture Module

Important Safety Instructions

Important Safety Instructions

Please read the following safety information first.

CAUTION Static electricity can damage electronic components.

Use an electrostatic bracelet if you have one.
Turn all equipment OFF. Don’t let your clothes touch the accessory.
To equalize the static electricity, rest the accessory bag on top of the PC
while you are removing the accessory from the bag. Handle the
accessory as little as possible and with care.

WARNING

For your safety, never remove the PC’s cover without first removing
the power cord from the power outlet, and any connection to a
telecommunications network. Always replace the cover on the PC
before switching it on again.

Before handling the VISUALIZE fx6 graphics board, first wait until the
board has cooled down completely before touching it. The graphics
board can become very hot during use.

2

Mil_fx6.fm Page 3 Friday, February 26, 1999 8:46 AM

Introduction

The HP VISUALIZE fx6 Texture Module is an add-on accessory for the
HP VISUALIZE fx6 graphics board.

The HP VISUALIZE fx6 Texture Module provides:

Accelerated hardware texture mapping

•

32 MB dedicated SDRAM (Synchronous DRAM) memory

•

for textures.

HP Kayak XW Series 0480 PC Workstation — HP VISUALIZE fx6 Texture Module

Introduction

Texture Module (HP D6795A)

HP VISUALIZE fx6 Graphics Board
(without Texture Module installed)

English 3