HP HLMP-0800, HLMP-4000 Datasheet

T-13/4, 2 mm X 5 mm Rectangular Bicolor LED Lamps High Efficiency Red/ High Performance Green

Technical Data

Features:

• Two Color (Red, Green) Operation

• (Other Two LED Color Combinations Available)

• Three Leads with One Common Cathode

• Option of Straight or Spread Lead Configurations

• Diffused, Wide Visibility Lens

Description

The T-1 3/4 HLMP-4000 and 2 mm by 5 mm rectangular HLMP-0800 are three leaded bicolor light sources designed for a variety of applications where dual state illumination is required in the same package. There are two LED chips, high efficiency red (HER), and high performance green (Green), mounted on a central common cathode lead for maximum on-axis viewability. Colors between HER and Green can be generated by independently pulse width modulating the LED chips.

HLMP-4000 HLMP-0800

Other Bicolor Combinations

Other bicolor combinations are available:

• HER/yellow

• HER/green

• DH AlGaAs red/green. Contact your local HewlettPackard Components Field Sales representative for details.

Package Dimensions

HLMP-4000 HLMP-0800

5964-9363E

1-157

Package Dimensions, continued

5.08 (0.200)

4.57 (0.180)

2.23 (0.088)

1.98 (0.078)

8.00 (0.315)

7.37 (0.290)

5.18 (0.204)

4.93 (0.194)

9.19 (0.362)

8.43 (0.332)

20.32

(0.800)

2.54 ± 0.25

(0.100 ± 0.010)

COMMON CATHODE

2.54 ± 0.25

(0.100 ± 0.010)

GREEN

ANODE

FLAT INDICATES

RED ANODE

RED ANODE

(SHORT LEAD)

MIN.

0.89 (0.035)

0.64 (0.025)

COMMON CATHODE

0.508

(0.020)

2.54 ± 0.25

(0.100 ± 0.010)

6.10 (0.240)

5.59 (0.220)

Absolute Maximum Ratings at T

Parameter Red/Green Units

2.41 (0.095)

2.03 (0.085)

SQUARE NOMINAL

COMMON CATHODE

NOTES:

1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).

2. AN EPOXY MENISCUS MAY EXTEND ABOUT 1 MM (0.040") DOWN THE LEADS.

= 25°C

High Efficiency

SIDE VIEW

2.54 ± 0.25

(0.100 ± 0.010)

2.54 ± 0.25

(0.100 ± 0.010)

GREEN

ANODE

RED ANODE

(SHORT LEAD)

20.32

(0.800)

MIN.

5.46 (0.215)

4.98 (0.196)

COMMON CATHODE

SQUARE

0.508 NOMINAL

(0.020)

2.54 ± 0.25

(0.100 ± 0.010)

Peak Forward Current 90 mA Average Forward Current DC Current Power Dissipation

[2,4]

(Total) 30 mA

[3,5]

Operating Temperature Range -20 to +85

[1,2]

(Total) 25 mA

(Total) 135 mW

°C

Storage Temperature Range -55 to +100 Reverse Voltage (IR = 100 µA) 5 V Transient Forward Current

[6]

500 mA

(10 µsec Pulse) Lead Soldering Temperature

[1.6 mm (0.063 in.) below 260°C for 5 seconds seating plane]

Notes:

1. See Figure 5 to establish pulsed operating conditions.

2. The combined simultaneous current must not exceed the maximum.

3. The combined simultaneous power must not exceed the maximum.

4. For HER and Green derate linearly from 50°C at 0.5 mA/°C.

5. For HER and Green derate linearly from 25°C at 1.8 mW/°C.

6. The transient peak current is the maximum non-recurring current that can be applied to the device without damaging the LED die and wirebond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the Absolute Maximum Ratings.

1-158

+ 2 hidden pages