QuickSpecs
HPE Integrity MC990 X Server
Overview
Page 1
HPE Integrity MC990 X Server
The HPE Integrity MC990 X Server delivers in-memory computing performance and capacity for the Linux-based applications at
unparalleled scale with mission
An advanced symmetric m
enterprise
chassis contains 4 sockets with up to 192 threads. By adding chassis and leveraging high bandwidth, low latency NUMAlink
technology, the HPE MC990 X Server ca
cache
large Linux applications, and realize all the benefits of sca
cooling, patching, and firmware
of mind and confidence as you deploy your large, memory intense, workloads on the MC990 X Server.
MC990 X Expansion Chassis (without bezel)
1.
PCIe 3.0 slots
6.
28x NUMAlink ports (per chassis)
2.
VGA port
7.
4x Internal drive-bays (SSD or HDD)
3.
Serial port
8.
2x 1.8-inch SSD drive bays
4.
Management connector
9.
4x USB ports & 1x Ethernet port
5.
RMC connector
10.
DVD-R or DVD-RW Drive
-critical reliability and modular flexibility.
ultiprocessing (SMP) system designed for data-intensive workloads, the HPE MC990 X Server features
-class Intel® Xeon® E7‑8800/4800 v4 processors and robust reliability, availability, and serviceability. The 5U modular
n scale as a single system from 4 to 32 sockets and from 256GB to 48 TB of
‑coherent shared memory. With a maximum of 768 cores of powerful Xeon compute, the MC990 X is ideal to deploy your
ling-up. These include lower IT infrastructure costs for footprint, power,
– ideal when IT resources are thin. A broad portfolio of mission critical HPE Services gives you peace
QuickSpecs
HPE Integrity MC990 X Server
Overview
Page 2
HPE Integrity MC990 X Server (8-socket)
1.
HPE Integrity Rack Management Controller (RMC)
2.
MC990 X Base Chassis (4-socket)
3.
MC990 X Expansion Chassis (4-socket)
QuickSpecs
HPE Integrit
y MC990 X Server
Standard Features
3
Models
The HPE Integrity MC990 X Server is available in seven (7) base configurations:
Processors
Four (4)Intel® Xeon® E7-8800 v4 or E7-4800 processors are configured in each Base server or Expansion
Memory Modules
DDR4 Registered (R) DIMMs in 8GB, 16GB, 32GB and 64GB capacities. Memory kits sold in quantities of
Internal Storage
Base IO: Zero (0) or two (2) 1.8” SATA solid state drives (SSDs) for boot.
Internal SAS
The HPE MC990 6Gb 4p Internal SAS Controller is required when ordering 2.5” internal drives
• HPE MC990 4S E7-8867 v4 Server
• HPE MC990 4S E7-8880 v4 Server
• HPE MC990 4S E7-8890 v4 Server
• HPE MC990 4S E7-8891 v4 Server
• HPE MC990 4S E7-8893 v4 Server
• HPE MC990 4S E7-4830 v4 Server
• HPE MC990 4S E7-4850 v4 Server
NOTE: Servers can be configured up to 32-sockets; use 4-socket Expansion servers when scaling beyond 4sockets
chassis:
• Intel Xeon Processor E7-8867 v4 18-core/2.4GHz/165W/45M
• Intel Xeon Processor E7-8880 v4 22-core/2.2GHz/150W/55M
• Intel Xeon Processor E7-8890 v4 24-core/2.2GHz/165W/60M
• Intel Xeon Processor E7-8891 v4 10-core/2.8GHz/165W/60M
• Intel Xeon Processor E7-8893 v4 4-core/3.2GHz/140W/60MB
• Intel Xeon Processor E7-4830 v4 14-core/2.0GHz/115W/35M
• Intel Xeon Processor E7-4850 v4 16-core/2.1GHz/115W/40M
NOTE: Servers can be configured up to 32-sockets; use 4-socket Expansion servers when scaling beyond 4sockets
32DIMMs.
• HPE MC990 256GB (32x8GB) PC4-2400P-R DIMMs (DDR4) Memory Kit
• HPE MC990 512GB (32x16GB) PC4-2400P-R DIMMs (DDR4) Memory Kit
• HPE MC990 1TB (32x32GB) PC4-2400P-R DIMMs (DDR4) Memory Kit
• HPE MC990 2TB (32x64GB) PC4-2400-LR DIMMs (DDR4) Memory Kit
• HPE MC990 400GB Base SATA 1.8in SSD
• HPE MC990 800GB Base SATA 1.8in SSD
Internal drives: Zero (0), two (2) or four (4) 2.5” SAS HDDs or SSDs for boot and/or data
• HPE MC990 600GB 12G SAS 10K 2.5in HDD
• HPE MC990 900GB 12G SAS 10K 2.5in HDD
Controller
• HPE MC990 200GB 12G SAS 2.5in MLC SSD
• HPE MC990 400GB 12G SAS 2.5in MLC SSD
• HPE MC990 800GB 12G SAS 2.5in MLC SSD
• HPE MC990 1TB 12G SAS 7.2K 2.5" HDD
• HPE MC990 2TB 12G SAS 7.2K 2.5" HDD
• HPE MC990 1.2TB 12G SAS 10K 2.5" HDD
• HPE MC990 1.6TB 12G SAS 2.5in MLC SSD
• HPE MC990 2TB 6G SATA 7.2K 2.5" HDD
• HPE MC990 1.6TB 6G SATA MLC 2.5" SSD
• HPE MC990 1.9TB 6G SATA MLC 2.5" SSD
• HPE MC990 3.8TB 6G SATA MLC 2.5" SSD
• Support for four (4) internal Hard Disk Drive (HDDs) or Solid State Drives (SSDs)
•
Supports RAID 0, 1, 10
Page
QuickSpecs
HPE Integrity MC990 X Server
Standard Features
Page 4
NOTE: Internal SAS Controller occupies 2 PCIe slots, one for the card and a second one for a Supercap/BBU
Optical Media
Drive
One (1) HPE DVD-RW or DVD-R Optical Drive
Embedded
Embedded 10/100/1000 Base-T LAN (auto sensing; RJ 45 connector). The system auto-selects the Ethernet
Embedded VGA,
15-pin VGA port supports:
I/O Expansion
The Integrity MC990 X Server(32S)supports up to ninety two (92)PCIe Gen3 slots
Network Adapters
Support for PCIe Gen3 1 Gb/s and 10 Gb/s network adapters for Local Area Network (LAN)
Fibre Channel Host
Support for 16 Gb/s Fibre Channel Host Bus Adapters
SAS RAID
Support for 6 Gb/s and 12 Gb/s SAS RAID Controllers
Ethernet
USB and Serial
ports
slots
port speed and type (duplex vs. half-duplex) when the server is booted, based on to what it is connected.
• Server-class 2D hardware acceleration support with integrated 24-bit RAMDAC
• Display resolution up to 1600 x 1200 @ 60Hz
• Up to 128 Mbytes DDRII memory interface support
Four (4) USB Type A ports to support general USB applications and optional keyboard and mouse
configurations
• 9-pin Serial port provides serial access to the individual chassis.
• Base chassis : eight (8) PCIe Gen3 slots; four (4) x8 slots and four (4) x16 slots
• Expansion chassis: twelve (12) PCIe Gen3 slots; eight (8) x8 slots and four (4) x16 slots
• Expansion chassis with disk riser: eight (8) PCIe Gen3 slots; four (4) x8 slots and four (4) x16 slots
• HPE MC990 10GbE Fiber 2p Adapter
• HPE MC990 10GBASE-T 2p Adapter
• HPE MC990 1000BASE-T 4p 5719 Adapter
• HPE MC990 1000BASE-T 4p Adapter
• HPE MC990 2P 10GbE Copper I71 Adapter
• HPE MC990 4P 10GbE Copper I71 Adapter
• HPE MC990 2P 10GbE Copper X710 Adapter
• HPE MC990 2P 10GbE SFP+ I71 Adapter
• HPE MC990 4P 10GbE SFP+ I71 Adapter
• HPE MC990 2P 1GbE Copper I35 Adapter
• HPE MC990 2P 1GbE SFP+ I35 Adapter
• HPE MC990 1P 40GbE Copper I71 Adapter
• HPE MC990 2P 40GbE Copper I71 Adapter
• HPE MC990 1P 40GbE SFP+ I71 Adapter
• HPE MC990 2P 40GbE SFP+ I71 Adapter
NOTE: All Optical network adapters include transceivers unless otherwise stated.
Bus Adapters
• HPE MC990 SN1100E 16Gb 2P FC HBA
− Avago Tech (Emulex) LPe16002B 2-port Fibre Channel Host Bus Adapter- C8R39A
NOTE: The Fibre Channel HBAs include transceivers
NOTE: The MC990 X does support Boot from SAN. Please see white paper for details:
https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=a00006145enw&doctype=Technical
white paper&doclang=EN_US&searchquery=&cc=us&lc=en
Controllers
• HPE MC990 6Gb 8p Ext SAS Controller
• HPE MC990 12Gb 16p Ext SAS Controller
• HPE MC990 12Gb 8p Ext SAS Controller
• HPE MC990 6Gb 4p Internal SAS Controller (required when using internal 2.5” drives)
QuickSpecs
HPE Integrity MC990 X Server
Standard Features
Page 5
Host Channel
Support for FDR and EDR InfiniBand and 40/100 Gb/s Ethernet Adapter and Intel OmniPath Architecture
IO Accelerator
Support for Solid State Drive (SSD) IO accelerator cards (PCIe form factor)
GPU Modules
Support for GPU modules
When a GPU module is used the power on the overall system may be N+1 depending on specific
Power & Cooling
Each of the MC990 X chassis include four (4) power supplies and four (4) cooling fans
Key Power &
• Redundant, hot-swappable power supplies and cooling fans
Rack Management
Each Integrity MC990 X system requires a rack management controller (RMC) located directly below the
Adding Additional
to Existing
The MC990 is modular in design and as such is capable of being upgrading with additional chassis with field
Certified
•
http://h17007.www1.hpe.com/us/en/enterprise/servers/supportmatrix/vmware.aspx#.WZ8doellBaR
Adapters
Cards
• HPE MC990 IB FDR/EN 40Gb 2p QSFP Adapter
• HPE MC990 IB EDR/EN 100Gb 1P QSFP Adapter
• HPE MC990 IB EDR/EN 100Gb 2P QSFP Adapter
• HPE MC990 1-port OPA Adapter
• HPE MC990 800GB P3700 PCIe Accelerator
• HPE MC990 2TB P3700 PCIe Accelerator
• HPE MC990 1.6TB NVMe PCIe Accelerator
• HPE MC990 3.2TB NVMe PCIe Accelerator
• HPE MC990 NVIDIA K80 Dual GPU Module
• HPE MC990 NVIDIA M40 24GB GPU Module
• HPE MC990 NVIDIA M40 12GB GPU Module
• HPE MC990 NVIDIA M60 16GB GPU Module
• HPE MC990 NVIDIA P100 16GB GPU Module
• HPE MC990 NVIDIA M4000 GPU Module
• HPE MC990 NVIDIA M6000 GPU Module
NOTE:
configuration parameters
NOTE: The P100 GPU Module will require an ambient temperature of 25 °C (77 °F)
• Four (4) hot-swap 12-Volt, 1600 Watt (Platinum) [200-240 VAC] Power supplies per chassis
• Four (4) hot-swap cooling fan assemblies per chassis
Cooling Features:
Controller (RMC)
• Online fault detection and ACPI support
MC990 X enclosures in a rack—a system consists of 1 to 8 MC990 X chassis The RMC supports powering up
and down of the system motherboards and environmental monitoring of all Integrity MC990 X chassis units
within the server. In addition, the RMC provides the top layer of system control for Integrity MC990 X system.
One GigE port from each MC990 X chassis connects to the RMC via Cat-5 cable.
Chassis
system
upgrades. The Upgrade would include an Instruction code, Scale Activation kit(s) and a set of NUMAlink
Cables
SUSE® Linux® Enterprise Server 11 SP3 and 12
Operating
Environments
• Red Hat® Enterprise Linux 6.6 and above, and 7.1 and above
• Oracle® Linux 7 with Unbreakable Enterprise Kernel;
• Oracle VM 3.4
• VMware vSphere6.5 (up to 8 sockets)
NOTE: For more information on the HPE Certified and Supported Hewlett Packard Enterprise servers for
OS and Virtualization Software and latest listing of software drivers available for your server, please visit
our Support Matrix at: http://www.hpe.com/info/ossupport
NOTE: For specific VMware information please refer to the HPE Support page
QuickSpecs
HPE Integrity MC990 X Server
Standard Features
Page 6
HPE Serviceguard
HPE Serviceguard for Linux x86 is high availability clustering software designed to protect applications and
Warranty
Three-year parts, 3 Year Labor and 3 Year on-site limited global warranty.
Storage support
The MC990 X Server uses industry standard components such as the Intel Xeon processor E7-8800/4800
HPE SPOCK
for Linux
services from planned and unplanned downtime.
Serviceguard for Linux (SGLX) ensures 24x7 application availability by packaging an application or service
with its associated resources, and moving that package to other servers as needed. Packages can be moved
automatically when Serviceguard detects a failure in a resource, or manually in order to perform system
maintenance or upgrades. By monitoring the health of each server (node) within a cluster, Serviceguard for
Linux quickly responds to failures such as those that affect processes, memory, LAN media and adapters, disk,
operating environments, and more.
Serviceguard for Linux also includes many out-of-the-box features that ensure scalability and allow intricate
control over cluster configuration, and optimizes in-house expertise for businesses already running
Serviceguard for HP-UX. Application Integration Toolkits are also available, and serve to quickly integrate
complex applications into a Serviceguard for Linux cluster. The Application Integration Toolkit portfolio
includes the Serviceguard Toolkit for NFS and the Serviceguard Contributed Toolkit Suite which are available
at no charge. In addition to high availability within a data center, the Serviceguard for Linux offers a powerful
and comprehensive suite of disaster recovery solutions.
NOTE: For more information on HPE Serviceguard for Linux (SGLX) reference the SGLX QuickSpecs
.
Protected by Hewlett Packard Enterprise Services and a worldwide network of Hewlett Packard Enterprise
Authorized Channel Partners.
family, the LPe16002B Fibre Channel adapter, and standard Linux distributions. As such, external storage
array interoperability with the MC990 X Server is like any other industry standard server and can be used with
storage arrays supporting servers configured with these industry standard components.
Supported HPE Storage arrays include:
• HPE 3PAR StoreServ 20000/8000/7000/10000 Storage
• HPE MSA 2040/2050 Storage
• HPE XP7 Storage
• HPE XP P9500 Storage
For detailed information on supported HPE Storage devices, please visit the
website.
QuickSpecs
Services and Support
7
HPE Pointnext
Protect your business beyond warranty with HPE Support Services
Services and
HPE Proactive Care Advanced – 3,4,5 Year
This is the recommended support for Mission Critical and SAP HANA environments. It builds on HPE Proactive
HPE Proactive Care - 3,4,5 Year
HPE Proactive Care begins with providing all of the benefits of proactive monitoring and reporting to put in
HPE Foundation Care – 3,4,5 Year
rovides flexibility to customize your reactive support level by selecting either 6hour call-to-repair, 24x7 with
HPE Datacenter Care service
HPE Datacenter Care helps improve IT stability and security, increase the value of IT, and enable agility and
HPE Technology Services Support Credits
Offer flexible services and technical skills to meet your changing IT demands. With a menu of service that is
HPE Server Hardware Installation
Provides for the basic hardware installation of Hewlett Packard Enterprise branded servers, storage devices
HPE Installation and Startup of HPE Servers
Support
HPE Integrity MC990 X Server
HPE Pointnext delivers confidence, reduces risk and helps customers realize agility and stability. HPE Support
Services enable you to order the right service level, length of coverage and response time as you purchase
your new server, giving you full entitlement for the selected support.
Care, providing additional benefits such as the assignment of a dedicated, local account support manager
(ASM) for collaboration and best practices and critical event management that provides 24x7 response and IT
service restoration with incident follow-up to prevent a repeat. All of this is designed to give you an incredibly
personalized, high-touch support experience that keeps your system fully available and running at peak
performance.
place the fundamentals needed for stability and availability of the IT environment. Proactive Care helps in
problem prevention, with predictive analytics, personalized analysis with recommendations and advice paired
with rapid access to technical experts to help rapidly resolve any problem. You receive an enhanced call
experience and a single point of contact for the support of all covered components. Customers can customize
their Proactive Care reactive support level by selecting either 6-hour call-to-repair, 24x7 with 4-hour onsite
response, or next-business day onsite response.
P
4-hour onsite response, or Next Business Day onsite response. The HPE Foundation Care with 6-hour call-torepair is the highest level commitment to repair hardware within six hours after the initial hardware service
request has been received and respond to software questions within two hours.
innovation. It is a structured framework of repeatable, tested, and globally available services “building blocks.”
You can deploy, operate, and evolve your datacenter wherever you are on your IT journey. With HPE
Datacenter Care, you benefit from a personalized relationship with HPE via a single point of accountability for
HPE and others’ products.
tailored to suit your needs, you get additional resources and specialist skills to help you maintain peak
performance of your IT. Offered as annual credits, you can plan your budgets while proactively responding to
your dynamic business.
and networking options to assist you in bringing your new hardware into operation in a timely and
professional manner.
Page
QuickSpecs
HPE Integrity MC990 X Server
Services and Support
Page 8
Provides for the installation of your new server and operating system. This service will assist in bringing your
Parts and Materials
HPE will provide HPE-supported replacement parts and materials necessary to maintain the covered hardware
HPE Factory Express for Servers and Storage
HPE Factory Express offers configuration, customization, integration and deployment services for HPE servers
0 servers as well
For more information: http://www.hpe.com/services
new HPE server and operating system into operation in a timely and professional manner. This service
provides a trained Hewlett Packard Enterprise service specialist to perform an installation that meets Hewlett
Packard Enterprise quality standards. The service highlights include: planning, deployment on site, Installation
verification tests, and customer orientation session.
product in operating condition, including parts and materials for available and recommended engineering
improvements. Parts and components that have reached their maximum supported lifetime and/or the
maximum usage limitations as set forth in the manufacturer's operating manual, product quick-specs, or the
technical product data sheet will not be provided, repaired, or replaced as part of these services. The defective
media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced by HPE due to
malfunction.
and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped
and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex configuration
and design services as well as individual factory services, such as image loading, asset tagging, and custom
packaging. HPE products supported through Factory Express include a wide array of servers and storage: HPE
Integrity, HPE ProLiant, HPE Apollo, HPE ProLiant Server Blades, HPE BladeSystem, HPE 900
as the MSA, 3PAR suite, XP, rackable tape libraries and configurable network switches.
QuickSpecs
HPE Integrity MC990 X Server
Ordering and Configuration
9
MC990 X Racks
MC990 X can be racked in many of the HPE G2 Enterprise Series and Advanced Series
http://h20565.www2.hpe.com/hpsc/doc/public/display?docId=a00008634en_us
The following HPE racks are supported with MC990 X:
HPE 22U 600mmx1075mm G2 Kitted Advanced Shock Rack with Side Panels and Baying
P9K04A
HPE 36U 600mmx1075mm G2 Kitted Advanced Shock Rack with Side Panels and Baying
P9K06A
HPE 42U 600mmx1200mm G2 Kitted Advanced Shock Rack with Side Panels and Baying
P9K10A
HPE 42U 600mmx1075mm G2 Kitted Advanced Shock Rack with Side Panels and Baying
P9K08A
HPE 42U 800mmx1075mm G2 Kitted Advanced Shock Rack with Side Panels and Baying
P9K12A
HPE 42U 800mmx1200mm G2 Kitted Advanced Shock Rack with Side Panels and Baying
P9K16A
HPE 42U 600mmx1075mm G2 Enterprise Shock Rack
P9K38A
HPE 42U 600mmx1200mm G2 Enterprise Shock Rack
P9K40A
HPE 42U 800mmx1075mm G2 Enterprise Shock Rack
P9K42A
HPE 42U 800mmx1200mm G2 Enterprise Shock Rack
P9K46A
HPE 48U 600mmx1075mm G2 Enterprise Shock Rack
P9K50A
HPE 48U 600mmx1200mm G2 Enterprise Shock Rack
P9K52A
HPE 48U 800mmx1075mm G2 Enterprise Shock Rack
P9K54A
HPE 48U 800mmx1200mm G2 Enterprise Shock Rack
P9K58A
HPE 42U 610mm x 1156mm Destination Rack
H7C27A
HPE 42U 610mm x 1156mm Extension Destination Rack
Q2T97A
MC990 X Power
The following PDUs are supported with MC990 X—refer to the server menu for ordering &
HPE G2 Basic Modular 14.4kVA/60309 63A 3-wire 48A/230V Outlets (6) C19/1U
Horizontal INTL PDU
P9Q51A
HPE G2 Basic Modular 3Ph 17.3kVA/60309 60A 4-wire 48A/208V Outlets (6) C19/1U
Horizontal NA/JP PDU
P9Q60A
HPE G2 Basic Modular 3Ph 22kVA/60309 5-wire 32A/230V Outlets (6) C19/1U
Horizontal INTL PDU
P9Q63A
HPE G2 Basic Modular 4.9kVA/L6-30P 24A/208V Outlets (6) IEC C19/1U Horizontal
NA/JP PDU
P9Q39A
HPE G2 Basic 7.3kVA/60309 3-wire 32A/230V Outlets (12) C13/1U Horizontal INTL PDU
P9Q44A
HPE G2 IEC C20 Input/(8) C13 Expansion Outlets/PDU Extension Bar Kit
P9Q66A
HPE Destination Rack 21 x Outlets 3-phase 240V NA/JP PDU
H7C28A
HPE Destination Rack 21 x Outlets 3-phase 400V INTL PDU
H7C29A
HPE Destination Rack 8 x Outlets Single-phase 240V NA PDU
H7C30A
HPE Destination Rack 8 x Outlets Single-phase 240V INTL PDU
H7C31A
HPE Destination Rack 8 x Outlets Single-phase 240V AU PDU
H7C32A
HPE G2 Basic 4.9kVA/L6-30P 24A/208V Outlets (20) C13/Vertical NA/JP PDU
P9Q41A
HPE G2 Basic 7.3kVA/60309 3-wire 32A/230V Outlets (20) C13/Vertical INTL PDU
P9Q45A
racks, and the HPE D-Rack. If the MC990 X will be configured as 16-sockets (4-chassis) or
more the HPE 800mm wide racks or D-Rack are required. Complete ordering rules can be
found in the MC990 X server menu and in the ordering & configuration tools.
The MC990 X can also be rack mounted in 3rd party rack. Specific rules and guidelines for
this are available here:
Distribution
configuration rules.
Options
Page
QuickSpecs
HPE Integrity MC990 X Server
Ordering and Configuration
Page 10
HPE G2 Basic 11kVA/60309 63A 3-wire 48A/230V Outlets (30) C13 (6) C19/Vertical
INTL PDU
P9Q50A
HPE G2 Basic 3Ph 17.3kVA/60309 60A 4-wire 48A/208V Outlets (18) C13 (6)
C19/Vertical NA/JP PDU
P9Q61A
HPE G2 Basic 3Ph 17.3kVA/60309 60A 4-wire 48A/208V Outlets (36) C13 (12)
C19/Vertical NA/JP PDU
P9Q62A
HPE G2 Basic 3Ph 22kVA/60309 5-wire 32A/230V Outlets (18) C13 (6) C19/Vertical
INTL PDU
P9Q64A
HPE G2 Basic 3Ph 22kVA/60309 5-wire 32A/230V Outlets (36) C13 (12) C19/Vertical
INTL PDU
P9Q65A
The HPE D-Rack is available for MC990 X in two models:
Dimensions for a single 24-inch wide 42U rack
Height: 78.75 in. (200 cm)
Width: 24.0 in (60.9 cm)
Depth: 45.5 in (115.6 cm)
Shipping dimensions (single rack)
Height: 88.88 in. (225.8 cm)
Width: 44.0 in (111.8 cm)
Depth: 62.75 in (159.4 cm)
Weight (single rack)
386 lb. (175.1 kg)
Shipping weight (single rack)
856 lb. (388.3 kg)
Static load (max)
2400 lb. (1088.6 kg)
Dynamic load (max rolling)
2500 lb. (1134kg)
42U rack access requirements:
Front: 48 in. (121.9 cm)
Rear: 48 in. (121.9 cm)
Top: 18 in. (45.7 cm)
NOTE: When configuring MC990 X with 12-sockets or greater, use HPE MC990 42U
Integrity MC990 X
HPE Integrity MC990 4-socket E7-8880 v4 Base Server
H7B99A
HPE Integrity MC990 4-socket E7-8890 v4 Base Server
H7C00A
HPE Integrity MC990 4-socket E7-8893 v4 Base Server
H7C17A
HPE Integrity MC990 4-socket E7-8891 v4 Base Server
H7C18A
HPE Integrity MC990 4-socket E7-8867 v4 Base Server
H7C19A
HPE Integrity MC990 4-socket E7-4830 v4 Base Server
Q2T76A
HPE Integrity MC990 4-socket E7-4850 v4 Base Server
Q2T78A
HPE Integrity MC990 4-socket E7-8880 v4 Expansion Server
H7C01A
HPE Integrity MC990 4-socket E7-8890 v4 Expansion Server
H7C02A
HPE Integrity MC990 4-socket E7-8893 v4 Expansion Server
H7C20A
HPE Integrity MC990 4-socket E7-8891 v4 Expansion Server
H7C21A
HPE Integrity MC990 4-socket E7-8867 v4 Expansion Server
H7C22A
HPE Integrity MC990 4-socket E7-4830 v4 Expansion Server
Q2T77A
HPE Integrity MC990 4-socket E7-4850 v4 Expansion Server
Q2T79A
NOTE: Max 3x MC990 X 8-socket servers per 42U rack; each MC990 X 8S server = 10U
• HPE 42U 610mm x 1156mm D-Rack (H7C27A)
• HPE D-Rack 42U 610mm x 1156mm Extended (Q2T97A) The extended rack includes a 2U extension for a total of 44
rack units (44U). Two additional codes are added to the quote for the bracket and support
610mm x 1156mm D-Rack (H7C27A)
Servers
QuickSpecs
HPE Integrity MC990 X Server
Ordering and Configuration
Page 11
plus 1U RMC
Rack Management
HPE Integrity Rack Management Controller
H7B94B
NOTE: One (1) RMC must be ordered per MC990 X Server regardless of socket count;
Scale activation
HPE MC990 8-socket Interconnect and Scale Activation Kit
H7C10A
HPE MC990 12-socket Interconnect and Scale Activation Kit
H7C11A
HPE MC990 16-socket Interconnect and Scale Activation Kit
H7C12A
HPE MC990 20-socket Interconnect and Scale Activation Kit
H7C13A
HPE MC990 24-socket Interconnect and Scale Activation Kit
H7C14A
HPE MC990 28-socket Interconnect and Scale Activation Kit
H7C15A
HPE MC990 32-socket Interconnect and Scale Activation Kit
H7C16A
NOTE: When configuring MC990 X 4S servers as 4-socket to 32-socket systems, the
MC990 X Bulkhead
HPE MC990 12-slot PCIe Module
H7C23A
HPE MC990 Disk Riser and 8-slot PCIe Module
H7C24A
HPE MC990 Compute Only Module
H7C25A
NOTE: Each MC990 X 4S Expansion chassis requires one of the above bulkhead options.
System Memory
HPE MC990 DDR4 256GB (32x8GB) Memory Kit
H7C06A
HPE MC990 DDR4 512GB (32x16GB) Memory Kit
H7C07A
HPE MC990 DDR4 1TB (32x32GB) Memory Kit
H7C08A
HPE MC990 DDR4 2TB (32x64GB) Memory Kit
H7C09A
NOTE: Memory must be installed in groups of 32 DIMMs for each 4-socket chassis ; each
Base IO Drives
NOTE:
HPE MC990 400GB Base SATA (1.8in) Solid State Drive
H7B55C
HPE MC990 800GB Base SATA (1.8in) Solid State Drive
H7B56C
NOTE: Base IO 1.8” SSDs are ordered in quantities of zero (0) or two (2)
Network Adapters
HPE MC990 10GbE Fiber 2-port Adapter
H7B72A
HPE MC990 10BASE-T 2-port Adapter
H7B74A
HPE MC990 1000BASE-T 4-port 5719 Adapter
H7B75A
HPE MC990 1000BASE-T 4-port Adapter
H7B76A
Controller (RMC)
kits
NOTE: Max 4x MC990 X 4-socket base servers per MC990 42U rack; each MC990 X 4S
base server = 5U plus 1U RMC
NOTE: Max 32-socket MC990 X system with single RMC per 42U rack
NOTE: RMC = 1U
options
appropriate scale activation kit must be ordered.
memory kit includes 32 DIMMs.
NOTE: All DIMM slots to be populated with the same DIMM type/capacity.
If booting from disk the MC990 X Server requires either the Base IO 1.8” SSD
drives or the internal 2.5” drives listed in a later section.
NOTE: If Base IO SSDs are ordered, both need to be of the same capacity
NOTE: Base IO SSDs will be configured as software RAID 1
NOTE: If Base IO SSDs are not ordered, internal 2.5” drives are required for boot
QuickSpecs
HPE Integrity MC990 X Server
Ordering and Configuration
Page 12
HPE MC990 10GbE 2-port Copper I71 Adapter
Q2T98A
HPE MC990 10GbE 4-port Copper X710 Adapter
Q2T99A
HPE MC990 10GbE 2-port Copper X710 Adapter
Q2U00A
HPE MC990 10GbE 2-port SFP+ I71 Adapter
Q2U01A
HPE MC990 10GbE 4-port SFP+ I71 Adapter
Q2U02A
HPE MC990 1GbE 2-port Copper I35 Adapter
Q2U03A
HPE MC990 1GbE 2-port SFP+ I35 Adapter
Q2U04A
HPE MC990 40GbE 1-port Copper I71 Adapter
Q2U05A
HPE MC990 40GbE 2-port Copper I71 Adapter
Q2U06A
HPE MC990 40GbE 1-port SFP+ I71 Adapter
Q2U07A
HPE MC990 40GbE 2-port SFP+ I71 Adapter
Q2U08A
Fibre Channel Host
HPE MC990 SN1100E 16Gb 2-port Fibre Channel Host Bus Adapter
H7B97A
NOTE: The H7B97A is the same card as LPe16002B FC HBA - C8R39A
Host Channel
HPE MC990 InfiniBand FDR/Ethernet 40Gb 2-port QSFP Adapter
H7B79A
HPE MC990 InfiniBand EDR/Ethernet 100Gb 1-port QSFP Adapter
Q2U09A
HPE MC990 InfiniBand EDR/Ethernet 100Gb 2-port QSFP Adapter
Q2U10A
HPE MC990 1-port Omni-Path Architecture Adapter
Q6L32A
IO Accelerators
HPE MC990 1.6TB NVMe PCIe Accelerator
Q2U11A
HPE MC990 3.2TB NVMe PCIe Accelerator
Q2U12A
GPU Modules
HPE MC990 NVIDIA Tesla K80 Dual GPU Module
H7B98A
HPE MC990 NVIDIA M40 24GB GPU Module
Q2T80A
HPE MC990 NVIDIA M40 12GB GPU Module
Q2T81A
HPE MC990 NVIDIA M60 16GB GPU Module
Q2T82A
HPE MC990 NVIDIA P100 16GB GPU Module
Q2T83A
HPE MC990 NVIDIA M4000 GPU Module
Q2T91A
HPE MC990 NVIDIA M6000 GPU Module
Q2T92A
NOTE: When a GPU module is used the power on the overall system may be N+1
SAS RAID
HPE MC990 6Gb 8p Ext SAS Controller
Q6L30A
HPE MC990 16-port External 12G SAS Controller
Q2U42A
HPE MC990 12Gb 8-port External SAS Controller
H7B70A
HPE MC990 4-port Internal 9361 SAS/RAID Controller
Q2U17A
NOTE: The Q2U17Ainternal SAS controller is required when internal 2.5” drives are
Internal 2.5” Hard
HPE MC990 600GB 12G SAS 10K SFF (2.5in) Hard Disk Drive
H7B57B
HPE MC990 900GB 12G SAS 10K SFF (2.5in) Hard Disk Drive
H7B58B
Bus Adapters
Adapters
depending on specific configuration parameters
NOTE: The P100 GPU Module will require an ambient temperature of 25 °C (77 °F)
Controllers
ordered. Occupies 2 PCIe slots
Disk Drives
QuickSpecs
Ordering and Configuration
Page 13
(HDDs)
HPE MC990 1TB 12G SAS 7.2K rpm SFF (2.5in) Midline 512n Hard Drive
Q2T62A
HPE MC990 2TB 12G SAS 7.2K rpm SFF (2.5in) Midline 512n Hard Drive
Q2T63A
HPE MC990 1.2TB 12G SAS 10K rpm SFF (2.5in) Midline 512n Hard Drive
Q2T61A
HPE MC990 2TB 6G SATA 7.2K rpm SFF (2.5in) Midline 512n Hard Drive
Q2T60A
NOTE:
Solid State Drives
HPE MC990 200GB 12G SAS SFF (2.5in) MLC Solid State Drive
H7B59A
HPE MC990 400GB 12G SAS SFF (2.5in) MLC Solid State Drive
H7B60A
HPE MC990 800GB 12G SAS SFF (2.5in) MLC Solid State Drive
H7B61A
HPE MC990 1.6TB 12G SAS SFF (2.5in) MLC Solid State Drive
H7B62A
HPE MC990 1.6TB 6G SATA SFF (2.5in) MLC Solid State Drive
Q2U13A
HPE MC990 1.9TB 6G SATA SFF (2.5in) MLC Solid State Drive
Q2U14A
HPE MC990 3.8TB 6G SATA SFF (2.5in) MLC Solid State Drive
Q2U15A
NOTE: Must order in quantities of zero (0), two (2), or four (4) drives
Internal Optical
HPE MC990 DVD-Read-Write Drive
H7B66A
HPE MC990 DVD-Read Drive
H7B67A
Additional Chassis
The MC990 is modular in design and as such is capable of being upgrading with additional
chassis with field upgrades.
HPE MC990 Upgrade Instructions
Q2T94A
HPE MC990 8-socket Interconnect and Scale Activation Kit
H7C10A
(utilized when growing for a 4 socket to 8 socket system i.e. adding one chassis
HPE MC990 4-socket Upgrade Scale Activation Kit
Q2U16A
(utilized when expanding beyond 8 sockets, Quantity 1 required for each 4 socket chassis
added to system)
HPE MC990 0.75m NUMAlink 7 Copper Cable
Q2T85A
HPE MC990 1.5m NUMAlink 7 Copper Cable
Q2T86A
HPE MC990 1m NUMAlink 7 Copper Cable
Q2T87A
HPE MC990 2m NUMAlink 7 Copper Cable
Q2T88A
HPE MC990 3m NUMAlink 7 Copper Cable
Q2T89A
NOTE: H7C10A is utilized when growing a 4 socket system to an 8 socket system
(SSDs)
HPE Integrity MC990 X Server
Must order in quantities of zero (0), two (2), or four (4) drives
NOTE: All drives must be of the same type and capacity
NOTE: The Q2U17A internal SAS controller is required when internal 2.5” drives are
ordered. Occupies 2 PCIe slots
NOTE:
or onsite
Drives will be configured as RAID 1 when shipped; can be reconfigured in the field
Drives
for Upgrade
NOTE: All drives must be of the same type and capacity
NOTE: The Q2U17A internal SAS controller is required when internal 2.5” drives are
ordered. Occupies 2 PCIe slots
NOTE:
Drives will be configured as RAID 1 when shipped; can be reconfigured in the field
or onsite
NOTE: Q2U16A is utilized for growing a system beyond 8 sockets. Quantity of 1 Q2U16A
is required for each 4 socket chassis added to a system
NOTE: Quantity and Length of NUMAlink cables is determined by the ending size of your
system. Please refer to quoting tools for quantities required
QuickSpecs
HPE Integrity MC990 X Server
Ordering and Configuration
Page 14
Integrity MC990 X
for SAP HANA TDI
The HPE Integrity MC990 X for SAP HANA TDI Scale-up Solution is certified as a compute block for SAP
Foundation
Foundation software is required for all MC990 X systems where SUSE or RedHat Linux is
HPE Foundation Software 2 for Red Hat Enterprise Linux Media License RTU
Q7N11A
HPE Foundation Software 2 for SUSE Linux Enterprise Server Media License RTU
Q7N12A
HPE Foundation Software 2 for Oracle License RTU
Q7N16A
HPE Foundation SW 2 FIO RHEL
Q7N13A
HPE Foundation SW 2 FIO SLES
Q7N14A
HPE Foundation SW 2 FIO Oracle
Q7N15A
HPE Foundation Software 2 for Red Hat Enterprise Linux Media
Q7Y82A
HPE Foundation Software 2 for SUSE Linux Enterprise Server Media
Q7Y83A
HPE Foundation Software 2 for Oracle Linux Media
Q7Y84A
NOTE: One RTU license is required per system. Additionally 1 of either the FIO or Media
Supported
SUSE Linux Enterprise Server see:
https://www.hpe.com/h20195/v2/GetPDF.aspx/c04154457.pdf
RHEL Enterprise Linux see:
https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=c04123419
VMware vSphere Standard 1 Processor 3yr Software
BD711A
VMware vSphere Standard 1 Processor 5yr Software
BD512A
VMware vSphere Enterprise Plus 1 Processor 3yr Software
BD715A
VMware vSphere Enterprise Plus 1 Processor 5yr Software
BD514A
NOTE: For Linux based O/S - Must order 1 x SLES OR RHEL subscription per every 2
NOTE:
HANA TDI from 4 socket to 20 socket (20TB). For configuration and ordering details, please see the HPE
Solutions for SAP HANA Tailored Data Center Integration (TDI) QuickSpecs:
https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=c05209803
Software
Operating Systems
used.. the version selected must match the operating system environment
kits are also required. It is permissible to order both Media and FIO.
sockets to a max of 10 (20 socket system)
For VMware based systems 1 license per socket is required (up to 8 sockets)
QuickSpecs
HPE Integrity MC990 X Server
Technical Specifications
15
Site Planning for MC990 X Server
System Unit
Dimensions
Height
4S chassis: 5U 8.75 inches (22.2 cm)
Width
17.5 inches (44.5 cm)
Depth
31.8 inches (80.8 cm)—without bezel
Weight
Maximum
4S: 146lbs (66.2 kg) (fully populated)
Power Specifications
Voltage Range
200 - 240 VAC
Maximum Current
10 Amps @ 200VAC per power supply
Frequency Range
50 - 60 Hz
BTU Rating
Maximum
17.74 kBTU//hr (1.48. Tons) , 5.33kW. Average 4
socket chassis configuration ~2.4kW
Power Supply
Maximum
Four 12-Volt, 1600 Watt (Platinum) [200-240 VAC]
System Inlet
Temperature tolerance
+5 °C (41 °F) to +35 °C (95 °F) (up to 1500 m / 5000
for configurations that require GPU support, 25 °C is
(305 m) of altitude above 5000 ft. (1525 m)
Non-Operating Temperature
-40 °C (-40 °F) to +60 °C (140 °F)
Humidity (non-
Relative humidity
20% to 80% operating (no condensation)
Altitude
Operating
10,000 ft. (3,049 m)
Non-operating
40,000 ft. (12,195 m) non-operating
Airflow
Intake (front)
650 CFM Max (1104 m3/hr)
Exhaust (rear)
475 CFM typical (407 m3/hr)
Acoustics (sound
Rack Mount
Approximately 77 dBA (at rear of rack)
Integrity MC990 X system rack physical specifications
Feature
1075mm rack
Dimensions for a single 24inch wide
Height: 78.97 in. (200.6 cm)
Depth: 44.3 in. (112.5 cm)
Shipping dimensions (single
Height: 85.35 in. (216.8 cm)
Width: 35.43 in. (90.0 cm)
Output
Temperature
(operating)
38.1 inches (96.8 cm)—with bezel
C13/C14
ft.)
maximum recommendation
+5 °C (41 °F) to +30 °C (86 °F) (1500 m to 3000 m
/5000 ft. to
10,000 ft.)
De-rate max ambient temperature by 1.8 °F (1 °C) per
1000 ft.
condensing)
power)
rack)
42U rack
8% to 80% non-operating (no condensation)
Width: 23.54 in. (59.8 cm)
Page
QuickSpecs
HPE Integrity MC990 X Server
Technical Specifications
Page 16
Depth: 50.87 in. (129.2 cm)
Weight (single rack)
233 lb. (106 kg)
Shipping weight (single rack)
446 lb. (203 kg)
System installed weight
525 lb. (238.1 kg)
Static load (max)
3000 lb. (1360.8 kg)
Dynamic load (max rolling)
2500 lb. (1134kg)
Dynamic (max configured)
2250 lb. (1020.6 kg)
42U rack access requirements:
Front: 48 in. (121.9 cm)
Rear: 48 in. (121.9 cm)
Top: 18 in. (45.7 cm)
1200mm rack
Dimensions for a single 24inch wide
Height: 78.97 in. (200.6 cm)
Depth: 49.61 in. (126.0 cm)
Shipping dimensions (single
Height: 85.35 in. (216.8 cm)
Depth: 57.87 in. (147.0 cm)
Weight (single rack)
282 lb. (128 kg)
Shipping weight (single rack)
507 lb. (230 kg)
System installed weight
(single rack) (max)
574 lb. (260.4 kg)
Static load (max)
3000 lb. (1360.8 kg)
Dynamic load (max rolling)
2500 lb. (1134kg)
Dynamic (max configured)
2250 lb. (1020.6 kg)
42U rack access requirements:
Front: 48 in. (121.9 cm)
Rack Management
42U Rack Access
Height
1U 1.72 inches (44 mm)
Width
17.2 inches (43.7 cm)
Depth
29.84 inches (75.8 cm)
Weight
20 lbs (9.1 kg)
Chassis power supply
Two per RMC
Chassis power cords
Two 8-ft (2.4 m) drop cables
Chassis power requirements
Voltage:
Frequency:
200-240V (180-264 VAC min/max)
Power:
50-60 Hz (47-63 Hz min/max) (50W) per supply
Hold-up time:
20 ms
RMC power: single-phase 200240 VAC
NEMA 5-15R (x2) N. America/Japan
IEC320-C13 (x2) N. America/Japan & Int’l
Air flow (front to back)
Maximum = 35 CFM (60 m3) per hour
Acoustical noise
Approximately 68 dBA
Regulatory
Regulatory Model
RSVLA-RE01: HPE Integrity MC990 X Server
(single rack) (max)
Controller (RMC)
Specifications
Requirements
rack)
42U rack
Width: 23.54 in. (59.8 cm)
Width: 35.43 in. (90.0 cm)
Rear: 48 in. (121.9 cm)
Top: 18 in. (45.7 cm)
QuickSpecs
HPE Integrity MC990 X Server
Technical Specifications
Page 17
Compliance
Number (MC990 X)
Regulatory Model
Number (RMC)
RSVLA-RE02: Rack Management Controller (RMC)
Electromagnetic
Complies with Part 15 of the FCC Rules as a Class A digital device. CAN ICES3(A)/NMB
55024, EN 61000
BSMI (Taiwan) Certification.
Safety
Complies with IEC 60950, EN 60950, EN 62479, UL 60950, and CSA 60950. CSA and
UL Certified.
interference
-3(A). Manufacturer's Declaration to CISPR 32, CISPR 24, EN 55032, EN
-3-2, EN 61000-3-3. VCCI (Japan) Registered, Korea Certification,
QuickSpecs
HPE Integrity MC990 X Server
Summary of Changes
18
Date
Version History
Action
Description of Change
05-Feb-2017
From Version 11 to 12
Changed
Service and Support and Ordering and Configuration sections were
updated.
Removed
SKUs deleted in Ordering and Configuration section:
H7B80A, H7B81A.
08-Jan-2018
From Version 10 to 11
Removed
SKU was deleted from Ordering and Configuration section:
H7B86A
06-Nov-2017
From Version 9 to 10
Changed
Standard Features, Service and Support, Ordering and Configuration,
and Technical Specifications sections were updated.
Added
SKUs added in Ordering and Configuration section:
Q7Y84A, BD711A, BD512A, BD713A, BD513A, BD715A, BD514A.
Removed
SKUs were deleted from Ordering and Configuration section:
H7B84A, BD713A, BD513A.
11-Jul-2017
From Version 8 to 9
Changed
Overview, Standard Features, and Ordering and Configuration sections
were updated.
Added
SKUs added in Ordering and Configuration section:
Q2T89A.
05-Jun-2017
From Version 7 to 8
Changed
Overview, Standard Features, Service and Support, Ordering and
Configuration, and Technical Specifications sections were updated.
Added
SKUs added in Ordering and Configuration section:
Q2U13A, Q2U14A, Q2U15A.
Removed
SKUs removed in Ordering and Configuration section per old 8 socket
H7B65A, H7B95A, H7B94A, H7B55B, H7B56B.
13-Feb-2017
From Version 6 to 7
Changed
Overview and Standard Features sections were updated.
Added
SKUs added in Ordering and Configuration section:
H7C25A.
28-Nov-2016
From Version 5 to 6
Changed
Overview, Standard Features, Ordering and Confguration, and Technical
Specifications
Added
SKUs added in Overview section:
H7C09A. H7B55B.,H7B56B.,H7B98A, ., H7B57B7B58B.
Removed
Obsolete SKUS were deleted: Obsolete SKUS ere deleted:
H7B50A, H7B51A, H7B52A, H7B53A,.H7B54A,. H7B55A, H7B56A,
P9K04A, P9K06A, P9K10A, P9K08A, P9K12A, P9K16A, P9K38A,
P9K40A, P9K42A, P9K46A, P9K50A, P9K52A, P9K54A, P9K58A,
H7C27A, Q2T97A, P9Q51A, P9Q60A, P9Q63A, P9Q39A, P9Q44A,
P9Q66A, H7C28A, H7C29A, H7C30A, H7C31A, H7C32A, P9Q41A,
P9Q45A, P9Q50A, P9Q61A, P9Q62A, P9Q64A, P9Q65A, Q7N11A,
Q7N12A, Q7N16A, Q7N13A, Q7N14A, Q7N15A, Q7Y82A, Q7Y83A,
H7B86A, H7B84A, H7B85A, H7C27A, H7B88A, H7B96A, H7B89A,
H7B90A, H7C28A, H7C29A, H7C30A, H7C31A, H7C32A, H7B91A,
H7B86A, H7B84A, H7B85A, H7C27A, H7B88A, H7B96A, H7B89A,
H7B90A, H7C28A, H7C29A, H7C30A, H7C31A, H7C32A, H7B91A,
Q2T94A, H7C10A, Q2U16A, Q2T85A, Q2T86A, Q2T87A, Q2T88A,
Q2T67A, H7B86A, Q2T76A, Q2T78A, Q2T77A, Q2T79A, Q2T98A,
Q2T99A, Q2U00A, Q2U01A, Q2U02A, Q2U03A, Q2U04A, Q2U05A,
Q2U06A, Q2U07A, Q2U08A, Q2U09A, Q2U10A, Q6L32A, Q2U11A,
Q2U12A, Q2T80A, Q2T81A, Q2T82A, Q2T83A, Q2T91A, Q2T92A,
Q6L30A, Q2U42A, Q2U17A, Q2T62A, Q2T63A, Q2T61A, Q2T60A,
system:
H7B50B, H7B51B, H7B52B, H7B53B, H7B54B, H7B63A, H7B64A,
H7C27A, H7C28A, H7C29A, H7C30A, H7C31A, H7C32A, H7C17A,
H7C18A, H7C19A, H7C20A, H7C21A, H7C22A, H7C10A, H7C11A,
H7C12A, H7C13A, H7C14A, H7C15A, H7C16A, H7C23A, H7C24A,
H7B99A H7C00A H7C01A, , H7C02A, H7C06A. H7C07A, H7C08A,
Page
QuickSpecs
HPE Integrity rx2800 i4 Server
Summary of Changes
Page 19
H7B57A, H7B58A.
05-Aug-2016
From Version 4 to 5
Changed
Overview, Ordering and Configuration, and Technical Specifications
sections were updated.
Removed
SKUs were deleted in Ordering and Configuration section:
NOU75A, P9U94A.
06-Jun-2016
From Version 3 to 4
Changed
Overview, Standard Features, Services and Support, and Ordering and
Configuration sections were updated.
Added
SKUs added in Ordering and Configuration section:
H7B95A, H7B97A, N0U73A, N0U75A.
Removed
Obsolete SKU was deleted:
G6F48A,
08-Abr-2016
From Version 2 to 3
Changed
Standard Features, Services and Support, Ordering and Configuration
sections were updated.
Added
SKUs added in Ordering and Configuration section:
H7B78A, P9U94A, G6F48A.
Removed
SKUs were deleted:
H7B92A, H7B93A.
11-Mar-2016
From Version 1 to 2
Changed
Standard Features, Ordering and Configuration, and Technical
Specifications sections were updated.
Removed
SKUs were deleted:
H7B73A, H7B77A.
16-Feb-2016
Version 1
Created
New QuickSpecs
Sign up for updates
© Copyright 2018 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such products and services.
N
shall not be liable for technical or editorial errors or omissions contained herein.
Hewlett Packard Enterprise makes no warranties for non
Intel and Itanium are registered trademarks or trademarks of Intel Corporation in the U.S. and/or other
countries.
c04912781 - 15497 - Worldwide - V12 - 5-February-2018
H7B87A, H7B68A, H7B52B, H7B51B, H7B94A, H7B63A, H7B64A,
H7B65A, H7B95A, H7B67A, H7B55A, H7B97A, H7B78A, NOU73A,
H7B96A, H7B50B, H7B51B, H7B52B, H7B53B, H7B54B, H7B94A,
H7B52A,
H7B52A, H7B63A, H7B64A, H7B65A, H7B67A, H7B55A, H7B68A,
othing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
-Hewlett Packard Enterprise products.
Loading...