HP f800x User Manual
f800x
Car Camcorder
User Manual
1
Contents
About this Guide ........................................................................... 4
FCC Statement .............................................................................. 4
Prohibition of co-location ............................................................. 5
Important note ............................................................................. 5
WEEE Notice .................................................................................. 5
CE Regulatory Notice .................................................................... 5
Battery warning ............................................................................ 6
Notes on Installation .................................................................... 6
Caution ......................................................................................... 6
1 Introduction ................................................................... 9
1.1 Features ............................................................................ 9
1.2 Package Contents ............................................................. 9
1.3 Product Overview ............................................................10
2 Getting Started ............................................................ 11
2.1 Inserting the Memory Card .............................................11
2.2 Installing in Vehicles .......................................................12
2.2.1 Mount to Windshield ...........................................12
2.2.2 Adjust the camcorder position ............................13
2.3 Connecting to Power .......................................................14
2.4 LED Indicator ...................................................................15
2.5 Powering the Camcorder On / Off ...................................16
2.5.1 Auto Power On/Off ..............................................16
2.5.2 Manual Power On/Off and Reset .........................16
2.5.2.1 Manual Power On ................................................16
2.5.2.2 Power Off ............................................................16
2.5.2.3 Reset the camcorder ...........................................16
2.6 Initial Settings .................................................................17
2
2.6.1 Set Automatic Record ..........................................17
2.6.2 Set the Date / Time .............................................17
2.6.3 Setting the Universal Time Code (UTC) ...............18
2.7 Application ......................................................................20
2.7.1 Application installation .......................................20
2.7.2 Wi-Fi connecting .................................................20
3 Using the Car Recorder .................................................. 22
3.1 Recording Videos ............................................................22
3.1.1 Record videos while driving ................................22
3.1.2 Emergency Recording .........................................22
3.1.3 The Recording Screen..........................................23
3.1.4 Add speed point ..................................................25
3.1.5 Taking Snapshot ..................................................25
3.1.6 4 GRID FUNCTION CHART on the LCD screen .......26
3.2 Driving Safety .................................................................27
3.2.1 LDWS (Lane Departure Warning Systems) ..........27
3.2.2 FCWS (Forward Collision Warning System) .........29
3.2.3 Front Vehicle Go ..................................................31
3.2.4 Headlight Warning ..............................................33
3.2.5 Speed Cam Alert ..................................................34
3.2.6 Speed Limit Alert .................................................35
3.2.7 Driver Fatigue Alert .............................................36
3.2.8 Motion Detection .................................................37
3.2.9 Collision Detection ..............................................38
3.2.10 ACC/DEC Alert ......................................................39
3.3 Playing Videos and Viewing Pictures ..............................41
3.3.1 Playing Videos and Emergency Recording ..........41
3.3.2 Viewing Pictures ..................................................42
3.3.3 The Playback Screen ...........................................43
3.3.4 Deleting Files ......................................................45
4 Adjusting the Settings .................................................. 46
3
4.1 Using the Menu ...............................................................46
4.2 Menu Items .....................................................................47
5 Installing the Software ................................................. 52
6 SuperCar ...................................................................... 53
7 Specifications .............................................................. 54
4
About this Guide
The content in this document is for information purpose and is subject to change
without prior notice. We made every effort to ensure that this User Guide is
accurate and complete.
However, no liability is assumed for any errors and omissions that may have
occurred.
The manufacturer reserves the right to change the technical specifications without
prior notice.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
Contains FCC ID: 2ACFIWM7911B
5
Prohibition of co-location
This device and its antenna(s) must not be co-located or operated in conjunction
with any other antenna or transmitter.
Important note
Radiation Exposure Statement: This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment. End users must follow
the specific operating instructions for satisfying RF exposure compliance. This
equipment should be installed and operated with minimum distance 20cm between
the radiator & your body. To maintain compliance with FCC exposure compliance
requirements, please follow the operating instructions as documented in this
manual.
WEEE Notice
Disposal of Waste Electrical and Electronic Equipment and/or Battery by users in
private households in the European Union
This symbol on the product or on the packaging indicates that this
cannot be disposed of as a household waste. You must dispose of
your waste equipment and/or battery by handling it over to the
applicable take-back scheme for the recycling of electrical and
electronic equipment and/or battery. For more information about
recycling of this equipment and/or battery, please contact your city
office, the shop where you purchased the equipment or your
household waste disposal service. The recycling of materials will
help to conserve natural resources and ensure that it is recycled in a
manner that protects human health and environment.
CE Regulatory Notice
The product herewith complies with the requirements of the Low Voltage Directive
2006/95/EC, the EMC Directive 2004/108/EC, the R&TTE Directive 1999/5/EC and
the RoHS Directive 2011/65/EC.
EU Health Protection: This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
This product will meet the Basic Restriction limits of 1999/519/EC.
6
Battery warning
The battery for this car camcorder is sealed internally. DO NOT
attempt to disassemble the camcorder and remove the battery.
Always charge using the provided system. Improper charging of the
battery may result in explosion.
The battery is designed for this camcorder and is not customer
replaceable.
Batteries may explode if exposed to naked fire. Never expose the
car camcorder in a fire.
Recycle the camcorder observing local regulations.
Notes on Installation
1. Install the device near the rear-view mirror to obtain the best
open-field view. Do NOT install the camcorder in a location that will
obstruct your required driving view.
2. Make sure that the lens is within the wiping range of the windshield
wiper to ensure a clear view even when it rains.
3. Do not touch the lens with your fingers. Finger grease may be left
on the lens and will result in unclear videos or snapshots. Clean the
lens on a regular basis.
4. Do not install the device on a tinted window. Doing so may damage
the tint film.
5. Make sure that the installation position is not hindered by the
tinted window.
Caution
Due to local laws and vehicles safety considerations, do not
attempt to change settings with the camcorder while driving.
The many Advanced Driver Assistance System (ADAS) features of
this Car Camcorder are for reference only. It is important to note
that these feature will not control your vehicle to prevent accidents.
It is the responsibility of the driver to obey traffic laws and maintain
control of the vehicle.
7
The results of GPS positioning are only for reference, and should
not affect the actual driving situation. GPS position accuracy may
have variation depending on system settings or external
conditions.
GPS positioning accuracy may differ depending on weather and
location such as high buildings, tunnels, undergrounds, or forests.
GPS satellite signals cannot pass through solid materials (except
glass). Tinted window may affect the performance of the GPS
satellite reception.
GPS reception performance on each camcorder may differ. The
system cannot determine the accuracy of the positioning results
from different camcorders.
The values displayed in this system, such as speed, position, and
the distance warning to the speed camera set points, may be
inaccurate due to the influence of surrounding environment. They
are for your reference only.
The system is used only for non-commercial use, within the
maximum limits permitted by applicable law. Our company does
not accept any responsibility for any data loss during the operation.
Wi-Fi Signals are unable to pass through the building. The upper
limit of signal transmission is 10m.
Wi-Fi Operation Channels List: Ch1~Ch11.
The product employs wireless data communication which may
interfere, or be interfered by, a near-by camcorder.
Never use this camcorder in the vicinity of a microwave oven or at
places where there is radio interference.
Radio wave reception may be worsened in specific environments.
Please be advised that if another camcorder is also using the same
2.4GHz band as this product, the processing speed of both
camcorders may slow down.
This product gets warm when in use; this is normal.
Improper use or operation of the product may result in damage of
the product or its accessories and void the warranty.
The radio frequency (RF) generated by this RF electronic camcorder
may cause adverse effects on the operation of other electronic
camcorders and result in malfunctioning. Wireless transmitters and
8
circuitry may also interfere with other electronic camcorders.
Therefore, do observe the following precautions:
• Aircraft: Never use a radio transmitter when you are in an
airplane. Please switch off the Wi-Fi function of the
camcorder.
• Vehicle: The radio frequency transmitted by this camcorder
may affect the electronic system in a motorized vehicle.
Please consult the manufacturer or dealer of your vehicle on
the possible effect.
• Pacemaker: In order to prevent any potential interference to a
pacemaker, anyone who uses a pacemaker should be advised,
that, when using this camcorder, a minimum distance of 15cm
(6 inch) should be kept between the camcorder and the
pacemaker; and never put this camcorder in a chest pocket. In
case of any doubt of interference, switch off the camcorder
immediately.
• Medical Camcorder: If you use a personal medical camcorder,
consult the camcorder manufacturer or your physician to
confirm if your camcorder is sufficiently shielded from the RF
transmission of this camcorder.
• Medical Facilities: Hospitals and medical institutes may use
facilities that are sensitive to an external RF energy. Observe
such instructions when the medical care personnel or any
posted sign requests you to switch off any camcorder that
may interfere the radio frequency.
• Explosion sites or any location with a posted sign: In order to
prevent interfering with an explosion activity, observe all the
signage and instructions in the Explosion Area or in a zone
with a “Switch Off 2-way Radios” sign by switching off
camcorders that may interfere with the radio frequency.
Before you start using the system, it is assumed that you
agree to the above statement.
9
1 Introduction
Thank you for purchasing this advanced Car Recorder. This camcorder is
specifically designed for real time video and audio recording when
driving.
1.1 Features
• Full HD recording videos
(1920x1080@30fps or 1280x720@30/60fps)
• 2.7” LCD color touch screen
• Wide angle lens
• Multifunction traffic safety reminder
• Automatic Emergency recording for collision detection
• Supports micro SDHC memory cards class 6 speed or greater up to
32GB.
1.2 Package Contents
The package contains the following items. In case there is any missing or
damaged item, contact your dealer immediately.
Camcorder
Bracket
CD-ROM Quick start guide Car adapter
10
1.3 Product Overview
No. Item No. Item
1 Bracket Socket 7 Wide Angle Lens
2 Memory Card Slot 8 Wi-Fi Transmission
3 Power Switch 9 Speaker
4 LED Indicator 10 Microphone
5 USB / Power Connector 11 LCD Touch Panel
6 GPS Antenna
Top and Bottom Views
Side (Left and Right) Views
Front View
Rear View
9
10
11
4
5
7
6
8
1
2
3
11
2 Getting Started
2.1 Inserting the Memory Card
Insert memory card with the pins upward and the screen of the
camcorder facing upward too, as illustrated. Push the memory card in
until a click sound is heard, indicating the card is in position.
To remove the memory card
Push to eject the memory card out of the slot.
Note:
1. Do not remove or insert the memory card when the camcorder is turned on. This
may damage the memory card.
2. Please use a Class 6 or higher rating Micro SD card, max. up to 32GB.
3. Please format the micro SD cards before the initial use.
4. When removing the memory card, be careful that the card may spring out and get
lost. The memory slot has this spring-out feature for easy removal of the card.
12
2.2 Installing in Vehicles
2.2.1 Mount to Windshield
1. Push the bracket into bracket slot on top of
camcorder, until a click sound is heard.
2. With the suction-cup laying flat,
position the suction-cup on the
windshield.
3. Hold the base firmly on the windshield
and press down the clamp to mount
the car holder to the windshield. Make
sure the base is securely locked in
place.
13
2.2.2 Adjust the camcorder position
1. Loose the knob to swivel the
camcorder vertically.
2. Loose the knob to swivel the
camcorder horizontally up to 360°.
3. Then tighten the knob to make
sure the camcorder is securely
locked in place.
Knob
Knob
14
2.3 Connecting to Power
Use only the attached power connector for activating the camcorder and
charging the built-in battery. Using another charger may damage the Car
Camcorder and void the warranty.
1. Connect one end of power connector to USB/Power connector port on
the camcorder.
2. Plug the other end of the car adapter to the cigarette lighter socket
of your vehicle. Once the vehicle engine is started, the camcorder
automatically turns on.
Note:
1. This product should be installed near the rear view mirror, at the center and top of
windshield for optimal viewing.
2. This product contains functions such as LDWS (Lane Departure Warning Systems)
(3.2.1),
FCWS (Forward Collision Warning
System)
(3.2.2) and Front Vehicle Go (3.2.3). Please
refer to the alignment measures given in the individual sections during their
installation for improved accuracy.
3. Please connect your Car Camcorder to the car charger for operation, otherwise its
LCD touch screen may fail to operate properly.
15
Battery Status Indicator:
Icon Description
Full battery power.
2/3 battery power.
1/3 battery power.
Out of battery power.
Battery is charging.
Connect the car adapter to charge the battery,
battery is full charged.
Note:
Please take note if the environment temperature reaches 45°C or above, the car
adapter will still supply power to camcorder, but it will not charge the battery. This is
the characteristic of this type of battery and is not a malfunction.
2.4 LED Indicator
Status Explanation LED Indicator Color
Power off, battery
charging
Red
Power off, battery full
charged
LED light off
Power on, battery
charging
Red
Power on, battery full
charged
Green
Standby / Standby and
screen off
Green
Recording/ Recording
and screen off
Flash red
16
2.5 Powering the Camcorder On / Off
2.5.1 Auto Power On/Off
Once the vehicle engine is started, the camcorder automatically turns on.
If the Automatic Record function is enabled, the recording will
automatically start right after the camcorder turns on.
Please refer to Set Automatic Record (2.6.1).
2.5.2 Manual Power On/Off and Reset
2.5.2.1 Manual Power On
Push the power switch and make sure that the power switch locks on the
memory card slot.
On
2.5.2.2 Power Off
Push the power switch and make sure that the memory slot is released
and the camcorder starts power off sequence. Do not power on the
camcorder when it is in the power-off sequence, or the recorded file may
become corrupt.
O
ff
2.5.2.3 Reset the camcorder
In case the camcorder fails to function normally due to unknown causes,
push the power switch and verify the memory card is in the removable
state; wait for 7 seconds and push the power switch again to restart the
camcorder.
Loading...