HP Envy 5535 Printer A9J44A1H3 User Manual

HP ENVY 5530 e-All-in-One series

Table of contents

1 HP ENVY 5530 e-All-in-One series Help .......................................................................................................... 1

2 Get to know the HP ENVY 5530 series ............................................................................................................ 3

Printer parts .......................................................................................................................................... 4

Control panel and status lights ............................................................................................................. 6

Auto-Off ................................................................................................................................................ 8

3 Print ................................................................................................................................................................... 9

Print photos ........................................................................................................................................ 10

Print documents ................................................................................................................................. 12

Print envelopes ................................................................................................................................... 14

Print Quick Forms ............................................................................................................................... 15

Print with HP wireless direct ............................................................................................................... 16

Tips for print success ......................................................................................................................... 18

Print using the maximum dpi .............................................................................................................. 20

4 Paper basics ................................................................................................................................................... 21

Recommended papers for printing ..................................................................................................... 22

Load media ......................................................................................................................................... 24

Order HP Paper Supplies ................................................................................................................... 28

5 Use Web Services .......................................................................................................................................... 29

ePrint from anywhere ......................................................................................................................... 30

Use HP Print Apps ............................................................................................................................. 32

Use the HP Connected website ......................................................................................................... 33

Tips for using Web Services ............................................................................................................... 34

6 Copy and scan ................................................................................................................................................ 35

Copy documents ................................................................................................................................ 36

Scan to a computer or memory card .................................................................................................. 39

Tips for copy and scan success ......................................................................................................... 41

ENWW iii

7 Work with cartridges ....................................................................................................................................... 43

Check the estimated ink levels ........................................................................................................... 44

Order ink supplies .............................................................................................................................. 45

Replace the cartridges ....................................................................................................................... 46

Use single-cartridge mode ................................................................................................................. 49

Cartridge warranty information ........................................................................................................... 50

Tips for working with cartridges .......................................................................................................... 51

8 Connectivity .................................................................................................................................................... 53

Wi-Fi Protected Setup (WPS – requires WPS router) ........................................................................ 54

Traditional wireless connection (requires router) ............................................................................... 55

Connect wirelessly to the printer without a router .............................................................................. 57

Change from a USB connection to a wireless network ...................................................................... 58

Tips for setting up and using a networked printer .............................................................................. 59

Advanced printer management tools (for networked printers) ........................................................... 60

9 Solve a problem .............................................................................................................................................. 63

Clear paper jam .................................................................................................................................. 64

Clear carriage jam .............................................................................................................................. 68

Clean ink smear ................................................................................................................................. 69

Improve print quality ........................................................................................................................... 70

Ink cartridge problem .......................................................................................................................... 73

Unable to print .................................................................................................................................... 75

Solve print problem ............................................................................................................................ 79

Solve copy and scan problem ............................................................................................................ 80

Solve networking problem .................................................................................................................. 81

Cartridge errors (Windows software) .................................................................................................. 82

HP support ......................................................................................................................................... 84

Appendix A Technical information ..................................................................................................................... 87

Hewlett-Packard Company notices .................................................................................................... 88

Specifications ..................................................................................................................................... 89

Environmental product stewardship program ..................................................................................... 91

Regulatory notices .............................................................................................................................. 95

Index ................................................................................................................................................................. 103

iv ENWW

1 HP ENVY 5530 e-All-in-One series Help

Learn how to use your HP ENVY 5530 series

Get to know the HP ENVY 5530 series on page 3

●

Print on page 9

●

Use Web Services on page 29

●

Copy and scan on page 35

●

Work with cartridges on page 43

●

Connectivity on page 53

●

Technical information on page 87

●

Solve a problem on page 63

●

ENWW 1

2 Chapter 1 HP ENVY 5530 e-All-in-One series Help ENWW

2 Get to know the HP ENVY 5530 series

Printer parts

●

Control panel and status lights

●

Auto-Off

●

ENWW 3

Printer parts

Figure 2-1 Front and top views of HP ENVY 5530 e-All-in-One series

Feature Description

1 Lid

2 Lid-backing

3 Glass

4 Paper-width guide

5 Cartridge access door

6 Paper path cover

7 Cartridge access area

8 Ink cartridges

9 On button

10 Memory card light

11 Memory card slot

12 Control panel

13 Color graphics display (also referred to as the display)

14 Paper tray

15 Paper tray extender (also referred to as the tray extender)

16 Model number location

17 Wireless status light and button

18 ePrint status light and button

4 Chapter 2 Get to know the HP ENVY 5530 series ENWW

Figure 2-2 Rear view of HP ENVY 5530 e-All-in-One series

Feature Description

19 Power connection. Use only the power cord supplied by HP.

20 Rear USB port

ENWW Printer parts 5

Control panel and status lights

Touch the directional buttons to navigate between two Home screens.

Figure 2-3 Control panel features

Feature Description

1 Home: Returns to the Home screen, the screen that is displayed when you first turn on the

printer.

2 ePrint icon: Opens the Web Services Summary menu, where you can check ePrint status

details, change ePrint settings, or print an Info page.

3 Wireless icon: Opens the Wireless Summary menu, where you can check wireless status

and change wireless settings. You can also print a wireless test report, helping diagnose
network connection issues.

4 Ink icon: Shows estimated ink levels by cartridge. Displays a warning symbol if the ink level

is less than the minimum expected ink level.

5 Settings icon: Opens the Settings menu where you can change preferences and use tools to

perform maintenance functions.

6 wireless direct icon: From the wireless direct menu you will be able to turn wireless direct ON

(with and without security), turn wireless direct OFF and display the wireless direct name and
password if turned on with security.

7 Help: On the Home screen, shows all Help topics. On another screen, shows information or

animation on the display to assist in the current operation.

8 Wireless status light: Indicates whether the printer has a wireless connection to the network.

9 Wireless button: Opens the Wireless Summary menu.

10 Directional buttons: Allow you to navigate through two home screens, photos, print previews,

apps, and horizontal menu options.

11 Back: Returns to the previous screen.

12 Photo: Opens the Photo Menu where you can view and print photos, or reprint a printed

photo.

13 Apps: Provides a quick and easy way to access and print information from the web, such as

coupons, coloring pages, puzzles, and more.

14 Copy: Opens the Copy menu where you can select a copy type or change the copy settings.

15 Cancel: Stops the current operation.

16 ePrint button: Opens the Web Services Summary menu, where you can check ePrint status

details, change ePrint settings, or print an Info page.

6 Chapter 2 Get to know the HP ENVY 5530 series ENWW

Feature Description

17 Scan: Opens the Scan menu where you can select a destination for your scan.

18 Quick Forms: Using HP Quick Forms, you can print calendars, check lists, games, notebook

paper, graph paper, and music paper.

Figure 2-4 Wireless status light and button

Number Feature Description

1 Wireless status light

2 Wireless button Press the button to display wireless status, IP address, network name, hardware address

Solid blue light indicates that wireless connection has been established and you can print.

●

Slow blinking light indicates that wireless is on, but the printer is not connected to a

●

network. Make sure your printer is within the range of wireless signal.

Fast blinking light indicates wireless error. Refer to the message on the printer display.

●

If wireless is turned off the wireless light is off, the display screen shows Wireless Off.

●

(MAC), and wireless direct status.

Figure 2-5 ePrint button

Press the button to display the printer’s email address, ePrint status, and ePrint feature.

ENWW Control panel and status lights 7

Auto-Off

Auto-Off is automatically enabled in some regions by default when you turn on the printer. When
Auto-Off is enabled, the printer automatically turns off after 2 hours of inactivity to help reduce energy
use. Auto-Off turns the printer off completely, so you must use the power button to turn the printer
back on. For printer models with wireless or Ethernet network capability, Auto-Off is automatically
disabled when the printer establishes a wireless or Ethernet network connection. Even when Auto-Off
is disabled, the printer enters Sleep mode after 5 minutes of inactivity to help reduce energy use.

To change the Auto-Off setting

1. Depending on your operating system, do one of the following to open the printer software:

Windows 8: On the Start screen, right-click an empty area on the screen, click All Apps on

●

the app bar, and then click the icon with the printer's name.

Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start,

●

select All Programs, click HP, click HP ENVY 5530 series, and then click HP ENVY 5530
series.

2. In the printer software, select Print & Scan and then click Maintain Your Printer to access the

printer toolbox.

3. In the printer toolbox that appears, click Advanced Settings, and then follow the onscreen

instructions.

Once you change the setting, the printer maintains the setting that you choose.

8 Chapter 2 Get to know the HP ENVY 5530 series ENWW

3Print

Print photos

●

Print documents

●

Print envelopes

●

Print Quick Forms

●

Print with HP wireless direct

●

Tips for print success

●

Print using the maximum dpi

●

ENWW 9

Print photos

Load photo paper

1. Load photo paper into the paper tray.

●

●

●

●

Pull out the paper tray until it stops.

Load photo paper print side down.

Move the paper-width guides inward against the edge of the paper.

Push the paper tray in until it stops.

2. Open the paper tray extender.

Print photos from a memory card

1. Insert a memory card into the memory card slot.

2. From the Home screen, touch Photo to display the Photo menu.

3. On the Photo menu, touch View & Print to display photos.

4. Touch a photo that you want to print.

5. Touch the up or down arrow to specify the number of photos to print.

6. Touch Edit to select options to edit the selected photos. You can rotate, crop a photo, or turn

Photo Fix on and off.

7. Touch Done and preview the selected photo. If you wish to adjust layout, paper type, red eye

removal, or date stamp, touch Settings, and then touch your selection. You can also save any
new settings as defaults.

8. Touch Print to begin printing.

10 Chapter 3 Print ENWW

To print a photo on photo paper

1. On the File menu in your software, click Print.

2. Make sure your printer is selected.

3. Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties, Options, Printer
Setup, Printer Properties, Printer, or Preferences.

4. Select the appropriate options.

On the Layout tab, select Portrait or Landscape orientation.

●

On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list

●

in the Tray Selection area, and then select the appropriate print quality in the Quality
Settings area.

Click Advanced to select the appropriate paper size from the Paper Size drop-down list.

●

NOTE: For maximum dpi resolution, go to Paper/Quality tab, select Photo Paper from the

Media drop-down list, and then select Best in the Quality Settings area. Then click the Advanced
button and select Yes from the Print in Max DPI drop-down list. If you want to print max DPI in
grayscale, select High Quality Grayscale from the Print in Grayscale drop-down list.

5. Click OK to return to the Properties dialog box.

6. Click OK, and then click Print or OK in the Print dialog box.

NOTE: Do not leave unused photo paper in the paper tray. The paper might start to curl, which

could reduce the quality of your printout. Photo paper should be flat before printing.

ENWW Print photos 11

Print documents

Load paper

1. Load paper into the paper tray.

Pull out the paper tray until it stops.

●

Load paper print side down.

●

Move the paper-width guides inward against the edge of the paper.

●

Push the paper tray in until it stops.

●

2. Open the paper tray extender.

To print a document

1. From your software, click the Print button.

2. Make sure your printer is selected.

3. Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties, Options, Printer
Setup, Printer Properties, Printer, or Preferences.

4. Select the appropriate options.

On the Layout tab, select Portrait or Landscape orientation.

●

On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list

●

in the Tray Selection area, and then select the appropriate print quality in the Quality
Settings area.

Click Advanced to select the appropriate paper size from the Paper Size drop-down list.

●

5. Click OK to close the Properties dialog box.

6. Click Print or OK to begin printing.

To print on both sides of the page

1. From your software, click the Print button.

2. Make sure your printer is selected.

12 Chapter 3 Print ENWW

3. Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties, Options, Printer
Setup, Printer Properties, Printer, or Preferences.

4. Select the appropriate options.

On the Layout tab, select Portrait or Landscape orientation.

●

On the Paper/Quality tab, select the appropriate paper type and print quality from the Media

●

drop-down list.

Click Advanced to select the appropriate paper size from the Paper Size drop-down list.

●

5. On the Layout tab, select Flip on Long Edge or Flip on Short Edge from the Print on Both Sides

drop-down list.

6. Click OK to print.

NOTE: After one page of the document has been printed, you will be prompted to wait for a

few seconds. Then the printer will automatically load the paper back to print on the other side.
You do not need to manually reload the paper or make any operations.

NOTE: If your printed documents are not aligned within the margins of the paper, make sure that

you have selected the correct language and region. On the printer display, select Settings, and then
select Preferences. Select your language, and then region from the options provided. The correct
language and country/region settings ensure that the printer will have the appropriate default paper
size settings.

ENWW Print documents 13

Print envelopes

You can load one or more envelopes into the paper tray of the HP ENVY 5530 series. Do not use
shiny or embossed envelopes or envelopes that have clasps or windows.

NOTE: For specific details on how to format text for printing on envelopes, consult the help files in

your word processing software. For best results, consider using a label for the return address on
envelopes.

Load envelopes

1. Make sure the paper tray is open.

2. Slide the paper-width guides all the open.

3. Place the envelopes in the center of the paper tray. The side to be printed on should face down.

The flap should be on the left side.

4. Push the envelopes into the printer until they stop.

5. Slide the paper-width guides firmly against the edge of the envelopes.

To print an envelope

1. On the File menu in your software, click Print.

2. Make sure your printer is selected.

3. Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties, Options, Printer
Setup, Printer Properties, Printer, or Preferences.

4. Select the appropriate options.

●

●

●

5. Click OK, and then click Print or OK in the Print dialog box.

On the Layout tab, select Portrait or Landscape orientation.

On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list
in the Tray Selection area, and then select the appropriate print quality in the Quality
Settings area.

Click Advanced to select the appropriate paper size from the Paper Size drop-down list.

14 Chapter 3 Print ENWW

Print Quick Forms

Use HP Quick Forms to print fun and useful pages. You can print calendars, check lists, games,
notebook paper, graph paper, and music paper

To print Quick Forms

1. On the Home screen from your printer display, touch the right directional button, and then touch

Quick Forms.

2. Touch Quick Forms. If you cannot find it, touch the right directional button to scroll through all

the apps.

3. Select one of the HP Quick Form options: Calendar, Check List, Games, Notebook Paper,

Graph Paper, and Music Paper.

4. Touch one of the subcategories from your selection. Use the right directional button to scroll

through the subcategories.

5. Touch the left or right arrow button to specify the number of copies you want to print, and then

touch Done.

ENWW Print Quick Forms 15

Print with HP wireless direct

With HP wireless direct, you can print wirelessly from a computer, smart phone, tablet, or other
wireless-capable device—without connecting to an existing wireless network.

When using HP wireless direct, note the following guidelines:

Make sure your computer or mobile device has the necessary software:

●

If you are using a computer, make sure you have installed the printer software provided with the
printer.

If you are using a mobile device, make sure you have installed a compatible printing app. For

●

more information about mobile printing, visit

mobile_printing_apps.html.

Make sure HP wireless direct is turned on in the printer and, if necessary, security is enabled.

●

For more information, see

Up to five computers and mobile devices can use the same HP wireless direct connection.

●

HP wireless direct can be used while the printer is also connected to a computer using USB

●

cable or to a network using a wireless connection.

HP wireless direct cannot be used to connect a computer, mobile device, or printer to the

●

Internet.

Connect wirelessly to the printer without a router on page 57.

www.hp.com/global/us/en/eprint/

Click here to go online for more information.

NOTE: At this time, these websites might not be available in all languages.

This section contains the following topics:

Print from a wireless-capable mobile device

●

Print from a wireless-capable computer

●

Print from a wireless-capable mobile device

Make sure you have installed a compatible printing app on your mobile device. For more information,

www.hp.com/global/us/en/eprint/mobile_printing_apps.html.

visit

1. Make sure you have turned on HP wireless direct on the printer. For more information, see
Connect wirelessly to the printer without a router on page 57.

2. Turn on the Wi-Fi connection on your mobile device. For more information, see the

documentation provided with the mobile device.

NOTE: If your mobile device does not support Wi-Fi, you are not able to use HP wireless

direct.

3. From the mobile device, connect to a new network. Use the process you normally use to

connect to a new wireless network or hotspot. Choose the HP wireless direct name from the list

16 Chapter 3 Print ENWW

of wireless networks shown such as HP-Print-**-ENVY-5530 (where ** are the unique characters
to identify your printer).

If HP wireless direct is turned on with security, enter the password when prompted.

4. Print your document.

Print from a wireless-capable computer

1. Make sure you have turned on HP wireless direct on the printer. For more information, see
Connect wirelessly to the printer without a router on page 57 for more information.

2. Turn on the computer's Wi-Fi connection. For more information, see the documentation provided

with the computer.

NOTE: If your computer does not support Wi-Fi, you are not able to use HP wireless direct.

3. From the computer, connect to a new network. Use the process you normally use to connect to

a new wireless network or hotspot. Choose the HP wireless direct name from the list of wireless
networks shown such as HP-Print-**-ENVY-5530 (where ** are the unique characters to identify
your printer).

If HP wireless direct is turned on with security, enter the password when prompted.

4. Proceed to step 5 if the printer has been installed and connected to the computer over a wireless

network. If the printer has been installed and connected to your computer with a USB cable,
follow the steps below to install the printer software using the HP wireless direct connection.

a. Depending on your operating system, do one of the following:

Windows 8: On the Start screen, right-click an empty area on the screen, click All Apps

●

on the app bar, and then click Printer Setup & Software.

Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start,

●

select All Programs, click HP, click HP ENVY 5530 series, and then click Printer Setup
& Software.

b. Select Connect New Printer.

c. When the Connection Options software screen appears, select Wireless.

Select HP ENVY 5530 series from the list of detected printers.

d. Follow the on-screen instructions.

5. Print your document.

ENWW Print with HP wireless direct 17

Tips for print success

Use the following tips to print successfully.

Tips for printing from a computer

For more information on printing documents, photos, or envelopes from a computer, use the following
links to operating-system specific instructions.

Learn how to print photos saved on your computer. Learn how to enable maximum dpi

●

resolution.

Click here to go online for more information.

Learn how to print envelopes from your computer.

●

Tips for ink and paper

Use original HP cartridges. Original HP cartridges are designed for and tested with HP printers

●

to help you produce great results, time after time.

Make sure the cartridges have sufficient ink. To view the estimated ink levels, touch the Ink icon

●

from the Home screen.

To learn more tips about working with cartridges, see

on page 51 for more information.

Load a stack of paper, not just one page. Use clean and flat paper of the same size. Make sure

●

only one type of paper is loaded at a time.

Adjust the paper-width guides in the paper tray to fit snugly against all paper. Make sure the

●

paper-width guides do not bend the paper in the paper tray.

Set the print quality and paper size settings according to the type and size of paper loaded in the

●

paper tray.

To clear paper jam, see

●

Printer settings tips

On the Paper/Quality tab, select the appropriate paper type from the Media drop-down list in the

●

Tray Selection area, and then select the appropriate print quality in the Quality Settings area.

Click here to go online for more information.

Tips for working with cartridges

Clear paper jam on page 64 for more information.

Select the appropriate paper size from the Paper Size drop-down list in the Advanced Options

●

dialog box. Access the Advanced Options dialog box by clicking the Advanced button on the
Layout or Paper/Quality tab.

To change default print settings, click Print & Scan, and then click Set Preferences in the printer

●

software.

Depending on your operating system, do one of the following to open the printer software:

Windows 8: On the Start screen, right-click an empty area on the screen, click All Apps on

◦

the app bar, and then click the icon with the printer's name.

Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start,

◦

select All Programs, click HP, click HP ENVY 5530 series, and then click HP ENVY 5530
series.

If you want to print a black and white document using black ink only, click the Advanced button.

●

From the Print in Grayscale drop-down menu, select Black Ink Only, then click the OK button.

18 Chapter 3 Print ENWW

Notes

Original HP ink cartridges are designed and tested with HP printers and papers to help you

●

easily produce great results, time after time.

NOTE: HP cannot guarantee the quality or reliability of non-HP supplies. Product service or

repairs required as a result of using a non-HP supply will not be covered under warranty.

If you believe you purchased original HP ink cartridges, go to:

www.hp.com/go/anticounterfeit

Ink level warnings and indicators provide estimates for planning purposes only.

●

NOTE: When you receive a low-ink warning message, consider having a replacement cartridge

available to avoid possible printing delays. You do not need to replace the cartridges until print
quality becomes unacceptable.

Software settings selected in the print driver only apply to printing, they do not apply to copying

●

or scanning.

You can print your document on both sides of the paper.

●

ENWW Tips for print success 19

Print using the maximum dpi

Use maximum dots per inch (dpi) mode to print high-quality, sharp images on photo paper.

Printing in maximum dpi takes longer than printing with other settings and requires a large amount of
disk space.

To print in Maximum dpi mode

1. On the File menu in your software, click Print.

2. Make sure your printer is selected.

3. Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties, Options, Printer
Setup, Printer Properties, Printer, or Preferences.

4. Click the Paper/Quality tab.

5. From the Media drop-down list, select the appropriate paper type and print quality.

6. Click the Advanced button.

7. In the Printer Features area, select Yes from the Print in Max DPI drop-down list.

8. Select the appropriate paper size from the Paper Size drop-down list.

9. Click OK to close the advanced options.

10. Confirm Orientation on the Layout tab, and then click OK to print.

20 Chapter 3 Print ENWW

4 Paper basics

Recommended papers for printing

●

Load media

●

Order HP Paper Supplies

●

ENWW 21

Recommended papers for printing

If you want the best print quality, HP recommends using HP papers that are specifically designed for
the type of project you are printing.

Depending on your country/region, some of these papers might not be available.

ColorLok

HP recommends plain papers with the ColorLok logo for printing and copying of everyday

●

documents. All papers with the ColorLok logo are independently tested to meet high standards
of reliability and print quality, and produce documents with crisp, vivid color, bolder blacks, and
dry faster than ordinary plain papers. Look for papers with the ColorLok logo in a variety of
weights and sizes from major paper manufacturers.

Photo printing

HP Premium Plus Photo Paper

●

HP Premium Plus Photo Paper is HP’s highest-quality photo paper for your best photos. With
HP Premium Plus Photo Paper, you can print beautiful photos that are instant-dry so you can
share them right off the printer. It is available in several sizes, including A4, 8.5 x 11 inch, 4 x 6
inch (10 x 15 cm), 5 x 7 inch (13 x 18 cm), and 11 x 17 inch (A3), and in two finishes - glossy or
soft gloss (semi-gloss). Ideal for framing, displaying, or gifting your best photos and special
photo projects. HP Premium Plus Photo Paper delivers exceptional results with professional
quality and durability.

HP Advanced Photo Paper

●

This thick photo paper features an instant-dry finish for easy handling without smudging. It
resists water, smears, fingerprints, and humidity. Your prints have a look and feel comparable to
a store-processed photo. It is available in several sizes, including A4, 8.5 x 11 inch, 10 x 15 cm
(4 x 6 inch), 13 x 18 cm (5 x 7 inch). It is acid-free for longer lasting documents.

HP Everyday Photo Paper

●

Print colorful, everyday snapshots at a low cost, using paper designed for casual photo printing.
This affordable photo paper dries quickly for easy handling. Get sharp, crisp images when you
use this paper with any inkjet printer. It is available in glossy finish in several sizes, including A4,

8.5 x 11 inch, and 10 x 15 cm (4 x 6 inch). For longer-lasting photos, it is acid-free.

Business documents

HP Premium Presentation Paper or HP Professional Paper 120

●

These papers are heavy two-sided matte papers perfect for presentation, proposals, reports,
and newsletters. They are heavyweight for an impressive look and feel.

HP Brochure Paper or HP Professional Paper 180

●

22 Chapter 4 Paper basics ENWW

These papers are glossy-coated or matte-coated on both sides for two-sided use. They are the
perfect choice for near-photographic reproductions and business graphics for report covers,
special presentations, brochures, mailers, and calendars.

Everyday printing

HP Bright White Inkjet Paper

●

HP Bright White Inkjet Paper delivers high-contrast colors and sharp text. It is opaque enough
for two-sided color usage with no show-through, which makes it ideal for newsletters, reports,
and flyers. It features ColorLok Technology for less smearing, bolder blacks, and vivid colors.

HP Printing Paper

●

HP Printing Paper is a high-quality multifunction paper. It produces documents that look and feel
more substantial than documents printed on standard multipurpose or copy paper. It features
ColorLok Technology for less smearing, bolder blacks, and vivid colors. It is acid-free for longer
lasting documents.

HP Office Paper

●

HP Office Paper is a high-quality multifunction paper. It is suitable for copies, drafts, memos, and
other everyday documents. It features ColorLok Technology for less smearing, bolder blacks,
and vivid colors. It is acid-free for longer lasting documents.

HP Office Recycled Paper

●

Special projects

●

HP Office Recycled Paper is a high-quality multifunction paper made with 30% recycled fiber. It
features ColorLok Technology for less smearing, bolder blacks and vivid colors.

HP Iron-On Transfers

HP Iron-on Transfers (for light or white fabrics) are the ideal solution for creating custom T-shirts
from your digital photos.

ENWW Recommended papers for printing 23

Load media

Do one of the following:

Load small-size paper

1. Pull out the paper tray, slide the paper-width guides outward, and then remove any previously

loaded media.

2. Load paper.

●

Insert a stack of photo paper into the paper tray with the short edge forward and the print
side down.

Slide the photo paper forward until it stops.

●

24 Chapter 4 Paper basics ENWW

Slide the paper-width guides inward until they stop at the edges of the paper.

●

Push the paper tray back in, and then open the paper tray extender.

●

Load full-size paper

1. Pull out the paper tray, slide the paper-width guides outward, and then remove any previously

loaded media.

2. Load paper.

●

Insert a stack of paper into the paper tray with the short edge forward and the print side
down.

ENWW Load media 25

Slide the paper forward until it stops.

●

Slide the paper-width guides inward until they stop at the edges of the paper.

●

Push the paper tray back in, and then open the paper tray extender.

●

Load envelopes

1. Pull out the paper tray, slide the paper-width guides outward, and then remove any previously

loaded media.

26 Chapter 4 Paper basics ENWW

2. Load envelopes

Insert one or more envelopes in the center of the paper tray. The print side should face

●

down. The flap should be on the left side and facing up.

Slide a stack of envelopes inward until it stops.

●

Slide the paper-width guides inward against the stack of envelopes until they stop.

●

Push the paper tray back in, and then open the paper tray extender.

●

ENWW Load media 27

Order HP Paper Supplies

The printer is designed to work well with most types of office media. Use HP media for optimum print
quality. Visit the HP website at

HP recommends plain papers with the ColorLok logo for printing and copying of everyday documents.
All papers with the ColorLok logo are independently tested to meet high standards of reliability and
print quality, and produce documents with crisp, vivid color, bolder blacks and dry faster than ordinary
plain papers. Look for papers with the ColorLok logo in a variety of weights and sizes from major
paper manufacturers.

www.hp.com for more information about HP media.

To purchase HP papers, go to

Shop for Products and Services and select ink, toner and paper.

28 Chapter 4 Paper basics ENWW

5 Use Web Services

ePrint from anywhere

●

Use HP Print Apps

●

Use the HP Connected website

●

Tips for using Web Services

●

ENWW 29

ePrint from anywhere

HP ePrint is a free service from HP that allows you to print to your HP ePrint-enabled printer
anywhere you can send an email. Just send your documents and photos to the email address
assigned to your printer when you enable Web Services. No additional drivers or software are
needed.

Your printer needs to have a wireless network connection to the Internet. You won't be able to

●

use HP ePrint via a USB connection to a computer.

Attachments might print differently from the way they appear in the software program that

●

created them, depending on the original fonts and layout options used.

Free product updates are provided with HP ePrint. Some updates might be required to enable

●

certain functionality.

Once you have signed up for an account on HP Connected(
to view your ePrint job status, manage your ePrint printer queue, control who can use your printer’s
ePrint email address to print, and get help for ePrint.

Before you can use ePrint, make sure that:

The printer is connected to an active network providing Internet access.

●

Web Services is turned on. If not, you will be prompted to turn it on.

●

To ePrint a document from anywhere

1. Enable Web Services.

a. From the printer control panel, press the ePrint button.

b. Accept the Terms of Use, and then follow the onscreen instructions to enable Web

Services.

c. Print the ePrint information page, and then follow the instructions on the page to sign up for

an ePrint account.

2. Find your ePrint email address.

a. Press the ePrint button on the control panel. You will see the Web Services Settings menu

on the printer display.

www.hpconnected.com), you can sign in

b. The printer’s email address appears in the Web Services Settings menu.

TIP: To print the email address or registration url, select Print Info Page from the Settings

menu on the printer display.

3. Email your document to the printer for printing.

a. Create a new email and attach the document to print.

b. Send the email to the printer email address.

The printer prints the attached document.

NOTE: The ePrint server does not accept email print jobs if there are multiple email addresses

included in the "To" or "Cc" fields. Only enter the HP ePrint email address in the "To" field. Do
not enter any additional email addresses in the other fields.

30 Chapter 5 Use Web Services ENWW

NOTE: The email will be printed once it is received. As with any email, there is no guarantee when

or whether it will be received. You can check the print status on HP
Connected(

NOTE: Documents printed with ePrint may appear different from the original. Style, formatting, and

text flow may differ from the original document. For documents that need to be printed with a higher
quality (such as legal documents), we recommend that you print from the software application on your
computer, where you will have more control over what your printout looks like.

www.hpconnected.com).

Click here to go online for more information.

ENWW ePrint from anywhere 31

Use HP Print Apps

Print pages from the web, without using a computer, by setting up Apps, a free service from HP. You
can print coloring pages, calendars, puzzles, recipes, maps, and more, depending on the apps
available in your country/region.

Touch the Get More icon on the Apps screen to connect to the Internet and add more apps. You
need to have Web Services enabled in order to use apps.

Go to the HP Connected website for more information and specific terms and conditions:

www.hpconnected.com.

32 Chapter 5 Use Web Services ENWW

Use the HP Connected website

Use HP’s free HP Connected website to set up increased security for HP ePrint, and specify the
email addresses that are allowed to send email to your printer. You can also get product updates,
more apps, and other free services.

Go to the HP Connected website for more information and specific terms and conditions:

www.hpconnected.com.

ENWW Use the HP Connected website 33

Tips for using Web Services

Use the following tips to print apps and use HP ePrint.

Tips for printing apps and using HP ePrint

Learn how to share your photos online and order prints.

●

information.

Learn about apps for printing recipes, coupons, and other content from the web, simply and

●

easily.

If you have enabled Auto-Off, you should disable Auto-Off to use ePrint. See

●

for more information.

Click here to go online for more information.

Click here to go online for more

Auto-Off on page 8

34 Chapter 5 Use Web Services ENWW

6 Copy and scan

Copy documents

●

Scan to a computer or memory card

●

Tips for copy and scan success

●

ENWW 35

Copy documents

The Copy menu on the printer display allows you to easily select number of copies and color or black
and white for copying on plain paper. You can also easily access advanced settings, such as
changing the paper type and size, adjusting the darkness of the copy, and resizing the copy.

Make a 1-sided copy

1. Load full-size paper in the paper tray.

Make sure the paper tray is pushed back in and the paper tray extender is open.

●

2. Lift the lid on the product.

TIP: To make copies of thick originals, such as books, you can remove the lid.

3. Load the original print side down on the right front corner of the glass.

4. Close the lid.

36 Chapter 6 Copy and scan ENWW

5. Specify number of copies and settings.

●

●

●

6. Start copy.

●

Make a 2-sided copy

1. Load full-size paper in the paper tray.

●

From the Home screen, touch Copy.Touch arrow buttons to change the number of copies.

If the 2–Sided option is selected, touch it to clear the selection.

Touch Settings to specify paper size, paper type, quality, or other settings.

Touch Black or Color.

Make sure the paper tray is pushed back in and the paper tray extender is open.

2. Lift the lid on the product.

TIP: To make copies of thick originals, such as books, you can remove the lid.

ENWW Copy documents 37

3. Load the original print side down on the right front corner of the glass.

4. Close the lid.

5. Select Copy.

From the Home screen, touch Copy.Touch arrow buttons to change the number of copies.

●

If the 2–Sided option is not selected, touch to select the option.

●

Touch Settings to specify paper size, paper type, quality, or other settings.

●

6. Start copy.

Touch Black or Color.

●

When prompted on the printer display, load the second original onto glass and touch OK.

●

38 Chapter 6 Copy and scan ENWW

Scan to a computer or memory card

You can scan to a computer either from the printer display or from the printer software on your
computer. Scanning from the printer display is quick. Scanning from the software gives you more
options.

Before you can scan to a computer from the printer display, make sure the printer is connected to
your computer either on a wireless network or through a USB cable.

Prepare the scan

1. Lift the lid on the product.

2. Load the original print side down on the right front corner of the glass.

3. Close the lid.

Scan to a computer or memory card from the printer display

1. Load the original.

2. To scan to a memory card, insert a memory card in the memory card slot.

If you want to scan to a computer, make sure the printer is connected to your computer on a
wireless network or through a USB cable.

3. Start scan.

ENWW Scan to a computer or memory card 39

a. From the Home screen, touch the right directional button, and then touch Scan.

b. Select the destination by touching either Computer or Memory Card.

Touch Touch here to preview to preview the scan.

Touch Settings to select a scan type or change resolution.

c. Touch Scan.

Scan from your computer

1. Depending on your operating system, do one of the following to open the printer software.

Windows 8: On the Start screen, right-click an empty area on the screen, click All Apps on

●

the app bar, and then click the icon with the printer's name.

Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start,

●

select All Programs, click HP, click HP ENVY 5530 series, and then click HP ENVY 5530
series.

2. In the printer software, click the Print & Scan icon, and then select Scan a Document or Photo.

3. Select the type of scan that you want from the shortcut menu and then click Scan.

NOTE: If Show Scan Preview is selected, you will be able to make adjustments to the scanned

image in the preview screen.

4. Select Save if you want to keep the application open for another scan, or select Done to exit the

application.

5. After the scan is saved, a Windows Explorer window will open in the directory where the scan

was saved.

NOTE: There is a limited number of computers that can have the scan function activated at the

same time. Select Scan on the printer display and you will see the computers that are currently
available for scanning.

40 Chapter 6 Copy and scan ENWW

Tips for copy and scan success

Use the following tips to copy and scan successfully:

Learn how to scan to email from the printer display.

●

Keep the glass and the back of the lid clean. The scanner interprets anything it detects on the

●

glass as part of the image.

Load your original, print side down, on the right front corner of the glass.

●

To make a large copy of a small original, scan the original into the computer, resize the image in

●

the scanning software, and then print a copy of the enlarged image.

If you want to adjust scan size, output type, scan resolution, or file type, and so on, start scan

●

from the printer software.

To avoid incorrect or missing scanned text, make sure the brightness is set appropriately in the

●

software.

If you have a wireless connection and you have confirmed that the connection is working, you

●

will need to enable wireless scanning in the software to scan from the printer display. Open the
printer software to select Print & Scan and then select Manage Scan to Computer.

If you have a wireless connection from your printer to your computer, and you want to always be

●

able to quickly scan to your connected computer, choose to have Scan to Computer always
active.

If you want to scan a document with several pages into one file instead of multiple files, start the

●

scan with the printer software instead of selecting Scan from the printer display.

Click here to go online for more information.

ENWW Tips for copy and scan success 41

42 Chapter 6 Copy and scan ENWW

7 Work with cartridges

Check the estimated ink levels

●

Order ink supplies

●

Replace the cartridges

●

Use single-cartridge mode

●

Cartridge warranty information

●

Tips for working with cartridges

●

ENWW 43

Check the estimated ink levels

To check the ink levels from the control panel

From the Home screen, touch the Ink icon to display the estimated ink levels.

●

To check the ink levels from the printer software

1. Double-click the HP ENVY 5530 series desktop icon to open the printer software.

NOTE: You can also access the printer software by clicking Start > All Programs > HP > HP

ENVY 5530 series >HP ENVY 5530 series

2. In the printer software, click Estimated Ink Levels.

NOTE: If you have installed a refilled or remanufactured cartridge, or a cartridge that has been used

in another printer, the ink level indicator might be inaccurate or unavailable.

NOTE: Ink level warnings and indicators provide estimates for planning purposes only. When you

receive a low-ink warning message, consider having a replacement cartridge available to avoid
possible printing delays. You do not have to replace the cartridges until the print quality is
unacceptable.

NOTE: Ink from the cartridges is used in the printing process in a number of different ways,

including in the initialization process, which prepares the product and cartridges for printing, and in
printhead servicing, which keeps print nozzles clear and ink flowing smoothly. In addition, some
residual ink is left in the cartridge after it is used. For more information, see

inkusage.

www.hp.com/go/

44 Chapter 7 Work with cartridges ENWW

Order ink supplies

Before ordering cartridges, locate the correct cartridge number.

Locate the cartridge number on the printer

The cartridge number is located inside the cartridge access door.

●

Locate the cartridge number in the printer software

1. Depending on your operating system, do one of the following to open the printer software:

Windows 8: On the Start screen, right-click an empty area on the screen, click All Apps on

●

the app bar, and then click the icon with the printer's name.

Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start,

●

select All Programs, click HP, click HP ENVY 5530 series, and then click HP ENVY 5530
series.

2. In the printer software, click Shop, and then click Shop For Supplies Online.

The correct cartridge number appears when you use this link.

To order original HP supplies for the HP ENVY 5530 series, go to
prompted, choose your country/region, follow the prompts to select your product, and then click one
of the shopping links on the page.

NOTE: Ordering ink cartridges online is not supported in all countries/regions. If it is not available in

your country/region, you may still view supplies information and print a list for reference when
shopping at a local HP reseller.

www.hp.com/buy/supplies. If

ENWW Order ink supplies 45

Replace the cartridges

To replace the cartridges

1. Check that power is on.

2. Remove the old cartridge.

a. Open the access door.

Wait for the print carriage to move to the center of the product.

b. Lift up the lid on the print cartridge, then remove the cartridge from the slot.

3. Insert a new cartridge.

a. Remove the cartridge from packaging.

46 Chapter 7 Work with cartridges ENWW

b. Remove plastic tape using the pink pull tab.

c. Slide the new cartridge in the slot at an angle under the opened lid, and then squeeze the

lid closed as the cartridge slides into place.

d. Close access door.

4. Close the cartridge access door.

NOTE: The HP printer software prompts you to align the ink cartridges when you print a

document after installing a new ink cartridge.

Related topics

Order ink supplies on page 45

●

ENWW Replace the cartridges 47

Tips for working with cartridges on page 51

48 Chapter 7 Work with cartridges ENWW

Use single-cartridge mode

Use the single-cartridge mode to operate the HP ENVY 5530 series with only one ink cartridge. The
single-cartridge mode is initiated when an ink cartridge is removed from the ink cartridge carriage.
During single-cartridge mode, the printer can copy documents, copy photos, and print jobs from the
computer.

NOTE: When the HP ENVY 5530 series operates in single-cartridge mode, a message is displayed

on the printer display. If the message is displayed and two ink cartridges are installed in the printer,
verify that the protective piece of plastic tape has been removed from each ink cartridge. When
plastic tape covers the ink cartridge contacts, the printer cannot detect that the ink cartridge is
installed.

Exit single-cartridge mode

Install two ink cartridges in the HP ENVY 5530 series to exit single-cartridge mode.

●

ENWW Use single-cartridge mode 49

Cartridge warranty information

The HP cartridge warranty is applicable when the cartridge is used in its designated HP printing
device. This warranty does not cover HP ink cartridges that have been refilled, remanufactured,
refurbished, misused, or tampered with.

During the warranty period the cartridge is covered as long as the HP ink is not depleted and the end
of warranty date has not been reached. The end of warranty date, in YYYY/MM format, may be found
on the cartridge as indicated:

For a copy of the HP Limited Warranty Statement for the printer, see the printed documentation that
came with the product.

50 Chapter 7 Work with cartridges ENWW

Tips for working with cartridges

Use the following tips to work with cartridges:

To protect the cartridges from drying out, always turn the printer off using the On button, and

●

wait until the On button light goes out.

Do not open or untape cartridges until you are ready to install them. Leaving tape on the

●

cartridges reduces ink evaporation.

Insert the cartridges into the correct slots. Match the color and icon of each cartridge to the color

●

and icon for each slot. Make sure the cartridges snap into place.

After you insert new cartridges, align the printer for best print quality. See

●

on page 70 for more information.

When the Estimated Ink Levels screen shows one or both cartridges in a low state, consider

●

getting replacement cartridges to avoid possible printing delays. You do not need to replace the
cartridges until print quality becomes unacceptable. See
more information.

If you receive a carriage stalled error, try clearing carriage jam. See

●

on page 68 for more information.

If you remove a cartridge from the printer for any reason, try to replace it again as soon as

●

possible. Outside of the printer, if unprotected, cartridges begin to dry out.

Replace the cartridges on page 46 for

Improve print quality

Clear carriage jam

ENWW Tips for working with cartridges 51

52 Chapter 7 Work with cartridges ENWW

8 Connectivity

Wi-Fi Protected Setup (WPS – requires WPS router)

●

Traditional wireless connection (requires router)

●

Connect wirelessly to the printer without a router

●

Change from a USB connection to a wireless network

●

Tips for setting up and using a networked printer

●

Advanced printer management tools (for networked printers)

●

ENWW 53

Wi-Fi Protected Setup (WPS – requires WPS router)

These instructions are for customers who have already setup and installed the printer software. For
first time installation refer to the setup instructions that came with the printer.

To connect the HP ENVY 5530 series to a wireless network using Wi-Fi Protected Setup (WPS), you
will need the following:

A wireless 802.11b/g/n network that includes a WPS-enabled wireless router or access point.

●

NOTE: The HP ENVY 5530 series only supports connections using 2.4GHz.

A desktop computer or laptop with either wireless networking support, or a network interface

●

card (NIC). The computer must be connected to the wireless network that you intend to install
the HP ENVY 5530 series on.

NOTE: If you have a Wi-Fi Protected Setup (WPS) router with a WPS push button, follow the Push

Button method. If you are not certain your router has a push button, follow the Wireless Settings
Menu method.

Push Button (PBC) method

1. Press and hold the Wireless button on the printer until the wireless light starts blinking,

approximately three seconds to start WPS push button mode.

2. Press the Wi-Fi Protected Setup (WPS) button on your router.

NOTE: The printer begins a timer for approximately two minutes while a wireless connection is

established.

PIN method

1. Press the Wireless button on the printer control panel to display the Wireless menu. If the printer

is printing, in an error state, or performing a critical task, wait until the task has been completed
or the error cleared before pressing the Wireless button.

2. Select Settings from the printer display.

3. Select Wi-Fi Protected Setup from the printer display.

4. If you have a Wi-Fi Protected Setup (WPS) router with a WPS push button, select Push Button,

and then follow the onscreen instructions. If your router does not have a push button or you are
not certain if your router has a push button, select PIN, and then follow the onscreen
instructions.

NOTE: The printer begins a timer for approximately four minutes during which the corresponding

button on the networking device needs to be pressed or the router PIN needs to be entered on the
router’s configuration page.

54 Chapter 8 Connectivity ENWW

Traditional wireless connection (requires router)

To connect the HP ENVY 5530 series to an integrated wireless WLAN 802.11 network, you will need
the following:

A wireless 802.11b/g/n network that includes a wireless router or access point.

●

NOTE: 802.11n will only support 2.4Ghz.

A desktop computer or laptop with either wireless networking support, or a network interface

●

card (NIC). The computer must be connected to the wireless network that you intend to install
the HP ENVY 5530 series on.

Broadband Internet access (recommended) such as cable or DSL.

●

If you connect the HP ENVY 5530 series on a wireless network that has Internet access, HP
recommends that you use a wireless router (access point or base station) that uses Dynamic
Host Configuration Protocol (DHCP).

Network name (SSID).

●

WEP key or WPA Passphrase (if needed).

●

To connect the product with the Wireless Setup Wizard

1. Write down your network name (SSID) and WEP key or WPA passphrase.

2. Start Wireless Setup Wizard.

a. From the Home screen, touch the Wireless icon, and then touch Settings.

b. Touch Wireless Setup Wizard.

3. Connect to wireless network.

●

4. Follow prompts.

5. Install software.

Connect a new printer

If you have not connected the printer to your computer, or you want to connect another new printer of
the same model to your computer, you can use the Connect a new printer function to set up the
connection.

NOTE: This method is available if you have already installed the printer software. It can be used if

your printer had to be replaced as part of a service unit exchange.

1. Depending on your operating system, do one of the following to open the printer software.

Select your network from the list of detected networks.

ENWW Traditional wireless connection (requires router) 55

Windows 8: On the Start screen, right-click an empty area on the screen, click All Apps on

●

the app bar, and then click the icon with the printer's name.

Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start,

●

select All Programs, click HP, click HP ENVY 5530 series, and then click HP ENVY 5530
series.

2. Select Printer Setup & Software.

3. Select Connect a new printer. Follow the on-screen instructions.

Change network settings

1. From the Home screen, touch the Wireless icon, and then touch Settings.

2. Touch Advanced Settings.

3. Select the item to be changed from the Advanced Settings menu.

4. Follow the onscreen instructions.

56 Chapter 8 Connectivity ENWW

Connect wirelessly to the printer without a router

wireless direct allows your Wi-Fi devices (for example: computers or smartphones) to connect to your
printer directly through Wi-Fi, using the process you currently use to connect your Wi-Fi device to new
wireless networks and hotspots. You can print directly to the printer wirelessly with the wireless direct
connection.

To connect wirelessly to the printer without a router

1. Turn on wireless direct from the control panel:

a. From the Home screen, touch the Wireless Direct icon.

b. If Wireless Direct displays Off, touch Settings.

c. Touch Wireless Direct, touch On (No Security) or On (With Security).

NOTE: If you turn on security, only users with the password will be able to print wirelessly

to the printer. If you turn off security, anyone with a Wi-Fi device within Wi-Fi range of the
printer will be able to connect to the printer.

2. Locate the wireless direct name and password if you have wireless direct security on:

a. From the Home screen, touch the wireless direct icon.

b. Touch Display Name to display the wireless direct name.

c. Touch Display Password to display the wireless direct password.

3. From your wireless computer or mobile device, turn on the Wi-Fi connection, search for and

connect to the wireless direct name, such as HP-Print-**-ENVY-5530 (where ** are the unique
characters to identify your printer)

If you have wireless direct security on, enter the wireless direct password when prompted.

4. Print a photo or a document as you normally do from your computer or mobile device.

Click here to go online for more information.

ENWW Connect wirelessly to the printer without a router 57

Change from a USB connection to a wireless network

If you first setup your printer and installed the software with a USB cable, directly connecting the
printer to your computer, you can easily change to a wireless network connection. You will need a
wireless 802.11b/g/n network that includes a wireless router or access point.

NOTE: The HP ENVY 5530 series only supports connections using 2.4GHz.

Before changing from a USB connection to a wireless network, make sure that:

The printer is connected to your computer with the USB cable until you are prompted to

●

disconnect the cable.

The computer is connected to the wireless network that you intend to install the printer on.

●

Change from a USB connection to a wireless network

1. Depending on your operating system, do one of the following to open the printer software.

Windows 8: On the Start screen, right-click an empty area on the screen, click All Apps on

●

the app bar, and then click the icon with the printer's name.

Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start,

●

select All Programs, click HP, and then click HP ENVY 5530 series.

2. Select Printer Setup & Software.

3. Select Convert a USB connected printer to wireless. Follow the on-screen instructions.

58 Chapter 8 Connectivity ENWW

Tips for setting up and using a networked printer

Use the following tips to set up and use a networked printer:

When setting up the wireless networked printer, make sure your wireless router is powered on.

●

The printer searches for wireless routers, then lists the detected network names on the display.

NOTE: If your printer has not been setup with a wireless connection, press the Wireless button

on the printer to start the Wireless Setup Wizard.

To check the wireless connection on the printer, touch the Wireless button on the control panel

●

to open the Wireless Summary menu. If it shows Wireless Off or Not Connected, touch Settings
and select Wireless Setup Wizard. Follow the on-screen instructions to set up your printer
wireless connection.

If your computer is connected to a Virtual Private Network (VPN), you need to disconnect from

●

the VPN before you can access any other device on your network, including the printer.

Learn more about configuring your network and the printer for wireless printing.

●

online for more information.

Learn how to find your network security settings.

●

Learn about the Network Diagnostic Utility (Windows only) and other troubleshooting tips.

●

here to go online for more information.

Learn how to change from a USB to wireless connection.

●

information.

Learn how to work with your firewall and anti-virus programs during printer setup.

●

go online for more information.

Click here to go online for more information.

Click here to go online for more

Click here to go

Click

Click here to

ENWW Tips for setting up and using a networked printer 59

Advanced printer management tools (for networked printers)

When the printer is connected to a network, you can use the embedded Web server to view status
information, change settings, and manage the printer from your computer.

NOTE: To view or change some settings, you might need a password.

You can open and use the embedded Web server without being connected to the Internet. However,
some features are not available.

To open the embedded Web server

●

About cookies

●

To open the embedded Web server

You can access the embedded Web server via either the network or Wireless Direct.

Open the embedded Web server via network

NOTE: The printer must be on a network and must have an IP address. The IP address for the

printer can be found by pressing the Wireless button or by printing a network configuration page.

In a supported Web browser on your computer, type the IP address or hostname that has been

●

assigned to the printer.

For example, if the IP address is 192.168.0.12, type the following address into a Web browser:
http://192.168.0.12.

Open the embedded Web server via Wireless Direct

1. From the home screen, press the Wireless button and then select Settings.

2. If the display shows that wireless direct is Off, select Wireless Direct and then select On (No

Security) or On (With Security).

3. From your wireless computer, turn wireless on, search for and connect to the wireless direct

name, for example: HP-Print-**-ENVY-5530 (where ** are the unique characters to identify your
printer). If you have wireless direct security on, enter the wireless direct password when
prompted.

4. In a supported Web browser on your computer, type the following address: http://192.168.223.1.

About cookies

The embedded Web server (EWS) places very small text files (cookies) on your hard drive when you
are browsing. These files let the EWS recognize your computer the next time you visit. For example,
if you have configured the EWS language, a cookie helps remember which language you have
selected so that the next time you access the EWS, the pages are displayed in that language.
Though some cookies are cleared at the end of each session (such as the cookie that stores the
selected language), others (such as the cookie that stores customer-specific preferences) are stored
on the computer until you clear them manually.

You can configure your browser to accept all cookies, or you can configure it to alert you every time a
cookie is offered, which allows you to decide which cookies to accept or refuse. You can also use
your browser to remove unwanted cookies.

60 Chapter 8 Connectivity ENWW

NOTE: Depending on your printer, if you disable cookies, you also disable one or more of the

following features:

Starting where you left the application (especially useful when using setup wizards)

●

Remembering the EWS browser language setting

●

Personalizing the EWS Home page

●

For information about how to change your privacy and cookie settings and how to view or delete
cookies, see the documentation available with your Web browser.

ENWW Advanced printer management tools (for networked printers) 61

62 Chapter 8 Connectivity ENWW

9 Solve a problem

Clear paper jam

●

Clear carriage jam

●

Clean ink smear

●

Improve print quality

●

Ink cartridge problem

●

Unable to print

●

Solve print problem

●

Solve copy and scan problem

●

Solve networking problem

●

Cartridge errors (Windows software)

●

HP support

●

ENWW 63

Clear paper jam

Clear a paper jam from the paper path.

To clear a paper jam from the paper path

1. Open the cartridge access door.

2. Open the paper path cover.

3. Remove the jammed paper from the rear roller.

4. Close the paper path cover.

64 Chapter 9 Solve a problem ENWW

5. Close the cartridge access door.

6. Try printing again.

Clear a paper jam from the duplexer.

To clear a paper jam from the duplexer

1. Open the cartridge access door.

2. Open the paper path cover.

3. Press on the hole of the duplexer path cover to lift it up. Remove the jammed paper.

ENWW Clear paper jam 65

4. Close the paper path cover.

5. Close the cartridge access door.

6. Try printing again.

Clear a paper jam from the paper tray.

To clear a paper jam from the paper tray

1. Remove all paper or media from the paper tray.

2. Rotate printer until it rests on its left side.

3. Slide out the paper tray, and then remove jammed paper from inside the printer.

4. Slide the paper tray back into place.

5. Rotate the printer so it stands on its base, and then load the paper.

Clear a paper jam from the print zone.

To clear a paper jam from print zone

1. Open the cartridge access door.

66 Chapter 9 Solve a problem ENWW

2. Remove the jammed paper from inside the printer.

3. Close the cartridge access door.

4. Press the OK button on the control panel to continue the current job.

Prevent paper jams

Do not overfill the paper tray.

●

Remove printed papers from the paper tray frequently.

●

Ensure that paper loaded in the paper tray lays flat and the edges are not bent or torn.

●

Do not combine different paper types and paper sizes in the paper tray; the entire stack of paper

●

in the paper tray must be the same size and type.

Adjust the paper-width guides in the paper tray to fit snugly against all paper. Make sure the

●

paper-width guides do not bend the paper in the paper tray.

Do not force the paper too far forward in the paper tray.

●

If the above solutions do not resolve the problem,

ENWW Clear paper jam 67

click here for more online troubleshooting.

Clear carriage jam

Remove any objects, such as paper, that are blocking the print carriage.

NOTE: Do not use any tools or other devices to remove jammed paper. Always use caution when

removing jammed paper from inside the printer.

To get help from the print display, touch Help from the Home screen. Touch the directional button to
navigate through help topics, touch Troubleshoot and Support, and then touch Clear Carriage Jam.

Click here to go online for more information.

68 Chapter 9 Solve a problem ENWW

Clean ink smear

If a printout shows smears of ink, for subsequent prints, try using the Clean Ink Smear function from
the printer display. This process takes several minutes to complete. Full-size plain paper needs to be
loaded and will be moved back and forth during the cleaning. Mechanical noises are normal at this
time.

To clean ink smear from the printer display

1. From the Home screen, touch the Settings icon, and then touch Tools.

2. On the Tools menu, touch the down arrow to scroll through the options, and then touch Clean

Ink Smear.

ENWW Clean ink smear 69

Improve print quality

NOTE: To avoid print quality problems, always turn the printer off using the On button, and wait until

the On button light goes out before you pull the plug or turn off a power strip. This allows the printer to
move the cartridges to a capped position, where they are protected from drying out.

To improve print quality

1. Make sure you are using original HP ink cartridges.

2. Check the printer software to make sure you have selected the appropriate paper type from the

Media drop-down list and print quality from the Quality Settings drop-down list.

In the printer software, click Print & Scan and then click Set Preferences to access the print

●

properties.

3. Check the estimated ink levels to determine if the cartridges are low on ink. For more

information, see
consider replacing them.

Check the estimated ink levels on page 44. If the ink cartridges are low on ink

For more information, see
low on ink consider replacing them.

4. Align the cartridges.

To align the cartridges from the printer software

NOTE: Aligning the cartridges ensures the high-quality output. The HP All-in-One prompts you

to align the cartridges every time you install a new cartridge. If you remove and reinstall the
same ink cartridge, the HP All-in-One will not prompt you to align the ink cartridges. The HP All­in-One remembers the alignment values for that ink cartridge, so you do not need to realign the
ink cartridges.

a. Load letter or A4 unused plain white paper into the paper tray.

b. Depending on your operating system, do one of the following to open the printer software:

Windows 8: On the Start screen, right-click an empty area on the screen, click All Apps

●

on the app bar, and then click the icon with the printer's name.

Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start,

●

select All Programs, click HP, click HP ENVY 5530 series, and then click HP ENVY
5530 series.

c. In the printer software, click Print & Scan, and then click Maintain Your Printer to access the

Printer Toolbox.

Check the estimated ink levels on page 44. If the ink cartridges are

d. In Printer Toolbox, click Align Ink Cartridges on the Device Services tab. The printer prints

an alignment sheet.

70 Chapter 9 Solve a problem ENWW

e. Load the cartridge alignment sheet print side down on the right front corner of the scanner

glass.

f. Follow the instructions on the printer display to align the cartridges. Recycle or discard the

cartridge alignment sheet.

To align the cartridges from the printer display

a. From the Home screen on the printer display, select Tools.

NOTE: If you do not see the Home screen, touch the Home button.

b. From the Tools menu on the printer display, select Align Printer. Follow the on-screen

instructions.

5. Print a diagnostics page if the cartridges are not low on ink.

To print a diagnostics page from the printer software

a. Load letter or A4 unused plain white paper into the paper tray.

b. Depending on your operating system, do one of the following to open the printer software:

Windows 8: On the Start screen, right-click an empty area on the screen, click All Apps

●

on the app bar, and then click the icon with the printer's name.

Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start,

●

select All Programs, click HP, click HP ENVY 5530 series, and then click HP ENVY
5530 series.

c. In the printer software, click Print & Scan, and then click Maintain Your Printer to access the

printer toolbox.

d. Click Print Diagnostic Information on the Device Reports tab to print a diagnostics page.

Review the blue, magenta, yellow, and black boxes on the diagnostics page. If you are
seeing streaks in the color and black boxes, or no ink in portions of the boxes, then
automatically clean the cartridges.

ENWW Improve print quality 71

To print a diagnostics page from the printer display

a. From the Home screen on the printer display, select Tools.

NOTE: If you do not see the Home screen, press the Back button until you can see it.

b. From the Tools menu on the printer display, select Print Quality Report. Follow the on-

screen instructions.

6. Clean the ink cartridges automatically, if the diagnostic page shows steaks or missing portions of

the color and black boxes.

To clean the cartridges from the printer software

a. Load letter or A4 unused plain white paper into the paper tray.

b. Depending on your operating system, do one of the following to open the printer software:

Windows 8: On the Start screen, right-click an empty area on the screen, click All Apps

●

on the app bar, and then click the icon with the printer's name.

Windows 7, Windows Vista, and Windows XP: From the computer desktop, click Start,

●

select All Programs, click HP, click HP ENVY 5530 series, and then click HP ENVY
5530 series.

c. In the printer software, click Print & Scan and then click Maintain Your Printer to access the

Printer Toolbox.

d. Click Clean Ink Cartridges on the Device Services tab. Follow the on-screen instructions.

To clean the cartridges from the printer display

a. From the Home screen on the printer display, select Tools.

NOTE: If you do not see the Home screen, press the Back button until you can see it.

b. From the Tools menu on the printer display, select Clean Printhead. Follow the on-screen

instructions.

If the above solutions do not resolve the problem,

click here for more online troubleshooting.

72 Chapter 9 Solve a problem ENWW

Ink cartridge problem

First try removing and reinserting the ink cartridges. Make sure the cartridges are in the correct slots.
If this does not work, clean the cartridge contacts. If your problem is still not resolved, see

the cartridges on page 46 for more information.

To clean cartridge contacts

CAUTION: The cleaning procedure should take only a few minutes. Make sure that the ink

cartridges are reinstalled in the product as soon as possible. It is not recommended to leave the ink
cartridges outside of the product longer than 30 minutes. This could result in damage to the ink
cartridges.

1. Check that power is on.

2. Open the cartridge access door.

Replace

Wait for the print carriage to move to the ink label part of the product.

3. Remove the cartridge indicated in the error message.

4. Hold the ink cartridge by its sides with the bottom pointing up and locate the electrical contacts

on the ink cartridge. The electrical contacts are the small gold-colored dots on the ink cartridge.

Feature Description

1 Electrical contacts

ENWW Ink cartridge problem 73

5. Wipe only the contacts with a damp lint-free cloth.

CAUTION: Be careful to touch only the contacts, and do not smear any of the ink or other

debris elsewhere on the cartridge.

6. On the inside of the printer, locate the contacts in the print carriage. The contacts look like a set

of gold-colored bumps positioned to meet the contacts on the ink cartridge.

7. Use a dry swab or lint-free cloth to wipe the contacts.

8. Reinstall the ink cartridge.

9. Close the access door, and check if the error message has gone away.

10. If you still receive the error message, turn the product off, and then on again.

NOTE: If one ink cartridge is causing problems, you can remove it and use the single-cartridge

mode to operate the HP ENVY 5530 series with only one cartridge.

Click here to go online for more information.

74 Chapter 9 Solve a problem ENWW

Unable to print

If you are having trouble printing, you can download the HP Print and Scan Doctor, which can
troubleshoot this issue for you automatically. To get the utility, click the appropriate link:

NOTE: The HP Print and Scan Doctor may not be available in all languages.

Take me to the HP Print and Scan Doctor download page.

Resolve print issues

NOTE: Make sure that the printer is turned on and that there is paper in the tray. If you are still

unable to print, try the following in order:

1. Check for error messages from the printer display and resolve them by following the onscreen

instructions.

2. If your computer is connected to the printer with a USB cable, disconnect and reconnect the

USB cable. If your computer is connected to the printer with a wireless connection, confirm that
the connection is working.

3. Verify that the printer is not paused or offline.

To verify that the printer is not paused or offline

a. Depending on your operating system, do one of the following:

Windows 8: Point to or tap the upper-right corner of the screen to open the Charms

●

bar, click the Settings icon, click or tap Control Panel, and then click or tap View
devices and printers.

Windows 7: From the Windows Start menu, click Devices and Printers.

●

Windows Vista: From the Windows Start menu, click Control Panel, and then click

●

Printers.

Windows XP: From the Windows Start menu, click Control Panel, and then click

●

Printers and Faxes.

b. Either double-click the icon for your printer or right-click the icon for your printer and select

See what’s printing to open the print queue.

c. On the Printer menu, make sure there are no check marks next to Pause Printing or Use

Printer Offline.

d. If you made any changes, try to print again.

4. Verify that the printer is set as the default printer.

To verify that the printer is set as the default printer

a. Depending upon your operating system, do one of the following:

Windows 8: Point to or tap the upper-right corner of the screen to open the Charms

●

bar, click the Settings icon, click or tap Control Panel, and then click or tap View
devices and printers.

ENWW

Windows 7: From the Windows Start menu, click Devices and Printers.

●

Unable to print 75

●

●

b. Make sure the correct printer is set as the default printer.

The default printer has a check mark in a black or green circle next to it.

c. If the wrong printer is set as the default printer, right-click the correct printer and select Set

as Default Printer.

d. Try using your printer again.

5. Restart the print spooler.

To restart the print spooler

a. Depending upon your operating system, do one of the following:

Windows 8

i. Point to or tap the upper-right corner of the screen to open the Charms bar, and then

ii. Click or tap Control Panel, and then click or tap System and Security.

Windows Vista: From the Windows Start menu, click Control Panel, and then click
Printers.

Windows XP: From the Windows Start menu, click Control Panel, and then click
Printers and Faxes.

click the Settings icon.

Windows 7

Windows Vista

iii. Click or tap Administrative Tools, and then double-click or double-tap Services.

iv. Right-click or touch and hold Print Spooler, and then click Properties.

v. On the General tab, next to Startup type, make sure that Automatic is selected.

vi. If the service is not already running, under Service status, click or tap Start, and then

click or tap OK.

i. From the Windows Start menu, click Control Panel, System and Security, and then

Administrative Tools.

ii. Double-click Services.

iii. Right-click the Print Spooler, and then click Properties

iv. On the General tab, next to Startup type, make sure that Automatic is selected.

v. If the service is not already running, under Service status, click Start, and then click

OK.

i. From the Windows Start menu, click Control Panel, System and Maintenance,

Administrative Tools.

.

ii. Double-click Services.

iii. Right-click the Print Spooler service, and then click Properties.

76 Chapter 9 Solve a problem ENWW

Windows XP

6. Restart the computer.

7. Clear the print queue.

iv. On the General tab, next to Startup type, make sure that Automatic is selected.

v. If the service is not already running, under Service status, click Start, and then click

OK.

i. From the Windows Start menu, right click My Computer.

ii. Click Manage, and then click Services and Applications.

iii. Double-click Services, and then select Print Spooler.

iv. Right-click Print Spooler, and click Restart to restart the service.

b. Make sure the correct printer is set as the default printer.

The default printer has a check mark in a black or green circle next to it.

c. If the wrong printer is set as the default printer, right-click the correct printer and select Set

as Default Printer.

d. Try using your printer again.

To clear the print queue

a. Depending upon your operating system, do one of the following:

Windows 8: Point to or tap the upper-right corner of the screen to open the Charms

●

bar, click the Settings icon, click or tap Control Panel, and then click or tap View
devices and printers.

Windows 7: From the Windows Start menu, click Devices and Printers.

●

Windows Vista: From the Windows Start menu, click Control Panel, and then click

●

Printers.

Windows XP: From the Windows Start menu, click Control Panel, and then click

●

Printers and Faxes.

Double-click the icon for your printer to open the print queue.

b.

c. On the Printer menu, click Cancel all documents or Purge Print Document, and then click

Yes to confirm.

d. If there are still documents in the queue, restart the computer and try printing again after

the computer has restarted.

e. Check the print queue again to make sure it is clear, and then try to print again.

To check the power connection and reset the printer

1. Make sure the power cord is firmly connected to the printer.

ENWW Unable to print 77

1 Power connection to the printer

2 Connection to a power outlet

2. Look inside the printer and check for a green light indicating the printer is receiving electrical

power. If it is not lit, make sure the cord is fully plugged into the printer, or connect to another
power outlet.

3. Look at the On button located on the printer. If it is not lit, the printer is turned off. Press the On

button to turn on the printer.

NOTE: If the printer is not receiving electrical power, connect it to another power outlet.

4. With the printer turned on, disconnect the power cord from the side of the printer under the

cartridge access door.

5. Unplug the power cord from the wall outlet.

6. Wait at least 15 seconds.

7. Plug the power cord back into the wall outlet.

8. Reconnect the power cord to the side of the printer under the cartridge access door.

9. If the printer does not turn on by itself, press the On button to turn on the printer.

10. Try using the printer again.

If the above solutions do not resolve the problem,

click here for more online troubleshooting.

78 Chapter 9 Solve a problem ENWW

Solve print problem

Make sure that the printer is turned on and that there is paper in the paper tray. If you are still unable
to print, HP printer software for Windows provides tools that can help solve many common “Unable to
Print” issues.

To access the software on Windows, click the Start menu on your computer, then select All
Programs, and then click HP. Under HP ENVY 5530 e-All-in-One series, click HP ENVY 5530 e-All­in-One series, click the Help button, and then double-click HP Print and Scan Doctor.

Click here to go online for more information.

If print quality is not acceptable, try the following to improve print quality:

Use the printer status and print quality reports to diagnose printer and print quality issues. From

●

the Home screen, touch the Settings icon, and then touch Tools. Touch Printer Status Report or
Print Quality Report.

Click here to go online for more information

If printouts show misaligned colors or lines, try aligning the printer. See

●

on page 70 for more information.

If there are ink smears on the printouts, try clearing the ink smears. See

●

on page 69 for more information.

Improve print quality

Clean ink smear

ENWW Solve print problem 79

Solve copy and scan problem

HP provides a Scan Diagnostic Utility (Windows only) that can help solve many common “Unable to
scan” issues. From the Start menu on your computer, click All Programs, and then click HP. Under
HP ENVY 5530 e-All-in-One series, click HP ENVY 5530 e-All-in-One series, click the Help button,
and then double-click HP Print and Scan Doctor.

Learn more about how to solve scan issues.

Learn how to solve copy issues.

Click here to go online for more information.

Click here to go online for more information.

80 Chapter 9 Solve a problem ENWW

Solve networking problem

Check the network configuration or print the wireless test report to assist in diagnosing network
connection issues.

To check network configuration or print wireless test report

1. From the Home screen, touch the Wireless icon, and then touch Settings.

2. Touch the down arrow to scroll through options. Touch Display Network Configuration or Print

Wireless Test Report.

Click the links below to find more online information to solve networking issues.

Learn more about wireless printing.

●

Learn how to find your network security settings.

●

Learn about the HP Print and Scan Doctor (Windows only) and other troubleshooting tips.

●

here to go online for more information.

Learn how to work with your firewall and anti-virus programs during printer setup.

●

go online for more information.

Click here to go online for more information.

Click here to go online for more information.

Click

Click here to

ENWW Solve networking problem 81

Cartridge errors (Windows software)

Cartridge supply upgrade

●

Check cartridge access door

●

Older generation cartridges

●

Printer failure

●

Ink cartridge problem

●

Cartridge supply upgrade

If the supply upgrade is not successful, try getting your printer to recognize the supply upgrade
cartridge.

To get the printer to recognize the supply upgrade cartridge:

1. Remove the supply upgrade cartridge.

2. Insert the original cartridge in the carriage.

3. Close the cartridge access door, then wait until the carriage stops moving.

4. Remove the original cartridge, then replace with the supply upgrade cartridge.

5. Close the cartridge access door, then wait until the carriage stops moving.

If you still receive a supply upgrade problem error message, contact HP support for help.

Click here to go online for more information.

Check cartridge access door

The cartridge access door should be closed for printing.

Click here to go online for more information.

82 Chapter 9 Solve a problem ENWW

Older generation cartridges

You will need to use a newer version of this cartridge. In most cases you can identify a newer version
of the cartridge by looking at the exterior of the cartridge package and finding the Warranty Ends
date.

If it says ‘v1’ several spaces to the right of the date, then the cartridge is the updated newer version. If
it is an older generation cartridge, contact HP support for help or replacement.

Click here to go online for more information.

Printer failure

Resolve printer failure.

Turn the printer off, then on. If that does not resolve the problem, contact HP.

▲

Please contact HP support for help .

Ink cartridge problem

The ink cartridge is not compatible with your printer. This error can occur if you install an HP Instant
Ink cartridge into a printer that has not been enrolled in the HP Instant Ink program. It can also occur
if the HP Instant Ink cartridge was previously used in a different printer enrolled in the HP Instant Ink
program.

Visit the

HP Instant Ink program website for more information.

ENWW Cartridge errors (Windows software) 83

HP support

Register printer

●

Support process

●

HP support by phone

●

Additional warranty options

●

Register printer

By taking just a few quick minutes to register, you can enjoy quicker service, more efficient support,
and product support alerts. If you did not register your printer while installing the software, you can
register now at

Support process

If you have a problem, follow these steps:

1. Check the documentation that came with the printer.

http://www.register.hp.com.

2. Visit the HP online support website at

HP online support is available to all HP customers. It is the fastest source for up-to-date product
information and expert assistance, and includes the following features:

Fast access to qualified online support specialists

●

Software and driver updates for the printer

●

Valuable troubleshooting information for common problems

●

Proactive printer updates, support alerts, and HP newsgrams that are available when you

●

register the printer

3. Call HP support.

Support options and availability vary by printer, country/region, and language.

HP support by phone

Phone support options and availability vary by product, country/region, and language.

This section contains the following topics:

Phone support period

●

Placing a call

●

www.hp.com/support.

Support phone numbers

●

After the phone support period

●

84 Chapter 9 Solve a problem ENWW

Phone support period

One year of phone support is available in North America, Asia Pacific, and Latin America (including
Mexico). To determine the duration of phone support in Europe, the Middle East, and Africa, go to

www.hp.com/support. Standard phone company charges apply.

Placing a call

Call HP support while you are in front of the computer and the printer. Be prepared to provide the
following information:

Product name (Located on the printer, such as HP ENVY 5530)

●

Product number (located inside the cartridge access door)

●

Serial number (located on the back or bottom of the printer)

●

Messages that appear when the situation occurs

●

Answers to these questions:

●

Has this situation happened before?

◦

Can you recreate it?

◦

Did you add any new hardware or software to your computer at about the time that this

◦

situation began?

Did anything else occur prior to this situation (such as a thunderstorm, the printer was

◦

moved, etc.)?

Support phone numbers

For the most current HP list of telephone support numbers and call costs information, see

www.hp.com/support.

After the phone support period

After the phone support period, help is available from HP at an additional cost. Help may also be
available at the HP online support website:
support phone number for your country/region to learn more about support options.

Additional warranty options

Extended service plans are available for the HP ENVY 5530 series at additional costs. Go to

www.hp.com/support, select your country/region and language, then explore the services and

warranty area for information about the extended service plans.

www.hp.com/support. Contact your HP dealer or call the

ENWW HP support 85

86 Chapter 9 Solve a problem ENWW

A Technical information

The technical specifications and international regulatory information for the HP ENVY 5530 series are
provided in this section.

For additional specifications, see the printed documentation that came with the HP ENVY 5530
series.

This section contains the following topics:

Hewlett-Packard Company notices

●

Specifications

●

Environmental product stewardship program

●

Regulatory notices

●

ENWW 87

Hewlett-Packard Company notices

The information contained herein is subject to change without notice.

All rights reserved. Reproduction, adaptation, or translation of this material is prohibited without prior
written permission of Hewlett-Packard, except as allowed under the copyright laws. The only
warranties for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained
herein.

© 2012 Hewlett-Packard Development Company, L.P.

Microsoft®, Windows ®, Windows® XP, Windows Vista®, Windows® 7 and Windows® 8 are U.S.
registered trademarks of Microsoft Corporation.

88 Appendix A Technical information ENWW

Specifications

Technical specifications for the HP ENVY 5530 series are provided in this section. For more product
specifications, see the Product Data Sheet at

System requirements

●

Environmental specifications

●

Print specifications

●

Scan specifications

●

Copy specifications

●

Cartridge yield

●

Print resolution

●

System requirements

Software and system requirements are located in the Readme file.

For information about future operating system releases and support, visit the HP online support
website at

www.hp.com/support.

www.hp.com/support.

Environmental specifications

Recommended operating temperature range: 15ºC to 32ºC (59ºF to 90ºF)

●

Allowable operating temperature range: 5ºC to 40ºC (41ºF to 104ºF)

●

Humidity: 20% to 80% RH non-condensing (recommended); 25ºC maximum dewpoint

●

Non-operating (Storage) temperature range: –40ºC to 60ºC (-40ºF to 140ºF)

●

In the presence of high electromagnetic fields, it is possible the output from the HP ENVY 5530

●

series may be slightly distorted.

HP recommends using a USB cable less than or equal to 3 m (10 feet) in length to minimize

●

injected noise due to potential high electromagnetic fields.

Print specifications

Print speeds vary according to the complexity of the document.

●

Method: drop-on-demand thermal inkjet

●

Language: PCL3 GUI

●

Scan specifications

Optical Resolution: up to 1200 dpi

●

Hardware Resolution: up to 1200 x 1200 dpi

●

Enhanced Resolution: up to 1200 x 1200 dpi

●

ENWW Specifications 89

Bitdepth: 24-bit color, 8-bit grayscale (256 levels of gray)

●

Maximum scan size from glass: 21.6 x 29.7 cm (8.5 x 11.7 inches)

●

Supported File Types: BMP, JPEG, PNG, TIFF, PDF

●

Twain Version: 1.9

●

Copy specifications

Digital image processing

●

Maximum number of copies varies by model.

●

Copy speeds vary according to the complexity of the document and model.

●

Cartridge yield

Visit www.hp.com/go/learnaboutsupplies for more information on estimated cartridge yields.

Print resolution

Table A-1 Print resolution

Draft mode

Normal mode

Plain-Best mode

Photo-Best mode

Max DPI mode

Color Input/Black Render: 300x300dpi

●

Output (Black/Color): Automatic

●

Color Input/Black Render: 600x300dpi

●

Output (Black/Color): Automatic

●

Color Input/Black Render: 600x600dpi

●

Output (Black/Color): Automatic

●

Color Input/Black Render: 600x600dpi

●

Output (Black/Color): Automatic

●

Color Input/Black Render: 1200x1200dpi

●

Output: Automatic (Black), 4800x1200 optimized dpi (Color)

●

90 Appendix A Technical information ENWW

Environmental product stewardship program

Hewlett-Packard is committed to providing quality products in an environmentally sound manner.
Design for recycling has been incorporated into this product. The number of materials has been kept
to a minimum while ensuring proper functionality and reliability. Dissimilar materials have been
designed to separate easily. Fasteners and other connections are easy to locate, access, and remove
using common tools. High priority parts are designed for efficient disassembly and repair.

For more information, visit HP’s Commitment to the Environment website at:

www.hp.com/hpinfo/globalcitizenship/environment/index.html.

This section contains the following topics:

Eco-Tips

●

Paper use

●

Plastics

●

Material safety data sheets

●

Recycling program

●

HP inkjet supplies recycling program

●

Power consumption

●

●

●

●

●

●

●

Eco-Tips

HP is committed to helping customers reduce their environmental footprint. Please visit the HP
Environmental Programs and Initiatives website for more information on HP’s environmental
initiatives.

www.hp.com/hpinfo/globalcitizenship/environment/

Paper use

This product is suited for the use of recycled paper according to DIN 19309 and EN 12281:2002.

Plastics

Disposal of waste equipment by users

Chemical substances

Toxic and hazardous substance table (China)

Restriction of hazardous substance (Ukraine)

Restriction of hazardous substance (India)

Sleep mode

Plastic parts over 25 grams are marked according to international standards that enhance the ability
to identify plastics for recycling purposes at the end of product life.

ENWW Environmental product stewardship program 91

Material safety data sheets

Material safety data sheets (MSDS) can be obtained from the HP website at:

www.hp.com/go/msds

Recycling program

HP offers an increasing number of product return and recycling programs in many countries/regions,
and partners with some of the largest electronic recycling centers throughout the world. HP conserves
resources by reselling some of its most popular products. For more information regarding recycling of
HP products, please visit:

www.hp.com/hpinfo/globalcitizenship/environment/recycle/

HP inkjet supplies recycling program

HP is committed to protecting the environment. The HP Inkjet Supplies Recycling Program is
available in many countries/regions, and lets you recycle used print cartridges and ink cartridges free
of charge. For more information, go to the following website:

www.hp.com/hpinfo/globalcitizenship/environment/recycle/

Power consumption

Hewlett-Packard printing and imaging equipment marked with the ENERGY STAR® logo is qualified
to the U.S. Environmental Protection Agency’s ENERGY STAR specifications for imaging equipment.
The following mark will appear on ENERGY STAR qualified imaging products:

Additional ENERGY STAR qualified imaging product model information is listed at: www.hp.com/go/

energystar

Disposal of waste equipment by users

This symbol means do not dispose of your product with your other household waste.
Instead, you should protect human health and the environment by handing over your
waste equipment to a designated collection point for the recycling of waste electrical
and electronic equipment. For more information, please contact your household waste
disposal service, or go to

http://www.hp.com/recycle.

92 Appendix A Technical information ENWW

Chemical substances

HP is committed to providing our customers with information about the chemical substances in our
products as needed to comply with legal requirements such as REACH

1907/2006 of the European Parliament and the Council)

product can be found at:

www.hp.com/go/reach.

Toxic and hazardous substance table (China)

(Regulation EC No

. A chemical information report for this

Restriction of hazardous substance (Ukraine)

Restriction of hazardous substance (India)

Sleep mode

Power usage is reduced while in the Sleep mode.

●

After initial setup of printer, the printer will enter the Sleep mode after five minutes of inactivity.

●

The time to the Sleep mode can be changed from the control panel.

●

ENWW Environmental product stewardship program 93

To set the Sleep mode time

1. From the Home screen, touch the Settings icon.

2. Touch Preferences.

3. Touch the down arrow to scroll through the options, and then touch Sleep Mode.

4. Touch After 5 minutes or After 10 minutes, or After 15 minutes.

94 Appendix A Technical information ENWW

Regulatory notices

The HP ENVY 5530 series meets product requirements from regulatory agencies in your country/
region.

This section contains the following topics:

Regulatory model identification number

●

FCC statement

●

VCCI (Class B) compliance statement for users in Japan

●

Notice to users in Japan about the power cord

●

Notice to users in Korea

●

Notice to users in Germany

●

Noise emission statement for Germany

●

European Union Regulatory Notice

●

Declaration of conformity

●

Regulatory wireless statements

●

Regulatory model identification number

For regulatory identification purposes, your product is assigned a Regulatory Model Number. The
Regulatory Model Number for your product is SNPRH-1202. This regulatory number should not be
confused with the marketing name (HP ENVY 5530 e-All-in-One series, etc.) or product numbers
(A9J40 to A9J49, etc.).

ENWW Regulatory notices 95

FCC statement

VCCI (Class B) compliance statement for users in Japan

Notice to users in Japan about the power cord

96 Appendix A Technical information ENWW