Optional 3rd and 4th 3.5" hot-plug SAS/SATA or nonhot plug SATA hard drive bays
11.
Standard 1st and 2nd 3.5" hot-plug SAS/SATA or nonhot plug SATA hard drive bays
12.
Full height/full length PCI-Express or HTX slot
What's New
Support for AMD Opteron 2300 series Quad-Core processors
Supports up to four SATA Hot Plug/Non-Hot Plug Midline and Entry Hard Drives
Rear View:
1.
Power supply cable socket
2.
PS/2 mouse port
3.
PS/2 keyboard port
4.
Two (2) RJ45 GbE LAN ports
5.
Rear panel USB 2.0 ports
6.
Lights-Out 100 10/100Mbps port
7.
Video port
8.
Serial port
9.
Low-profile riser board assembly slot cover
10.
Full-sized riser board assembly slot cover
DA - 13015 Worldwide QuickSpecs — Version 5 — 5.23.2008
Page 1
QuickSpecs
HP ProLiant DL165 Generation 5
Overview
At A Glance
Introducing the HP ProLiant DL165G5, now available with the latest high performance Opteron Quad Core processors,
increased storage by 2X and a new high efficiency power supply option.
Processors:
Supports up to two AMD Opteron 2300 series Quad-Core processors
Supports DirectConnect Architecture
Supports Power Now
Memory:
8 DIMM slots supporting up to 32GB REG PC2-5300 DDR2-667 MHz memory with Advanced ECC
Internal Drive Support:
Internal storage capacity:
SATA Capacity: Support for up to 4.0TB (4 x 1TB)
SAS Capacity: Support for up to 1.2TB (4 x 300GB)
NOTE:
Hard Drives for Hot Plug models only.
Network Controller:
Embedded NC7782 dual-port gigabit server adapter
Storage Controllers:
Non-Hot Plug SATA Models: HP Embedded SATA Controller
Hot Plug SATA/SAS Models: HP SC40Ge SAS HBA with RAID 0,1
HP ProLiant Lights Out 100i Remote Management support (IPMI 2.0 and SMASH support)
Virtual Media support with LO100i Select license
Virtual Media plus Virtual KVM support with LO100i Advanced license
USB Ports:
Up to five USB ports (two front & two rear standard, 1 internal option)
Optical Drive:
Support for one (optional): DVD-ROM, DVD/CD RW
Power Supply:
650W Power Supply (Non-Hot Plug, Autoswitching)
Form Factor:
Rack (1U)
Fixed mounting rails included with all models
Deployment/Serviceability:
Tool-less access to all system components for easy in-rack serviceability
Warranty:
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of
HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of
purchase. Support for software and initial setup is available for 90 days from date of purchase. Additional
support may be covered under the warranty or available for an additional fee. Enhancements to warranty
services are available through HP Care Pack services or customized service agreements. Certain restrictions
and exclusions apply. SATA hard drives have a one year warranty.
NOTE:
response. Additional information regarding worldwide limited warranty and technical support is available at:
Please see the following URL for additional information
.
DA - 13015 Worldwide QuickSpecs — Version 5 — 5.23.2008
Page 4
QuickSpecs
Standard Features
HP ProLiant DL165 Generation 5
Server Management
Stand Alone Software
Product and ProLiant
Essentials
ProLiant Essentials
Rapid Deployment Pack
HP Systems Insight
Manager
Lights-Out 100i
Rapid Deployment Pack (RDP) is an automated deployment and
provisioning solution for all ProLiant servers. RDP supports image
capture and deployment on 100 series servers. Every RDP disc
includes 10-node trial licenses for evaluation purposes. RDP requires a
license for each server deployed and is available for purchase with HP
servers. For more information, visit:
NOTE:
ProLiant Essentials Value Packs. AKA Tracking licenses require a 100
unit minimum forecast at initial contract signing. For AKA and flex
license part numbers, please refer to each software products’
QuickSpecs at:
various ProLiant Essentials Value Pack product QuickSpecs for more
information.
HP Systems Insight Manager (HP SIM) provides a unified, secure and
extensible standards-based environment to centrally manage servers,
storage and other infrastructure devices, (both HP and non-HP) across
multiple operating system platforms.
HP Lights-Out 100i Remote Management delivers affordable, entry level
remote management capabilities for HP ProLiant 100 Series servers
with embedded LO100i. It allows customers or their service providers to
remotely manage ProLiant 100 Series servers remotely over a LAN or
the Internet and consists of the following:
Flexible and volume quantity license kits are available for
http://www.hp.com/servers/proliantessentials
LO100i Standard is embedded remote management and provides
basic remote control via telnet, browser, and IPMI 2.0 and
SMASH
LO100i Select Pack License are upgrades for essential, secure,
remote control, serial console and virtual media
LO100i Advanced Pack License are upgrades for all the features
of LO100i Select plus Virtual KVM (graphical hardware-based,
remote console)
http://www.hp.com/go/rdp
.
or the
Core Infrastructure
Management
Subscriber's Choice
ROMPaq software and
latest drivers
NOTE:
both the Lights-Out 100i Select and Lights-Out 100 Advanced Pack
licenses as well as Electronic License To Use (E-LTU). AKA Tracking
licenses require a 100 unit minimum forecast at initial contract signing.
For these additional part numbers, please refer to each software
products' QuickSpecs at this link for more information:
Subscriber's Choice Driver and Support Alerts/Notifications is a webbased email subscription service that provides software and driver
change notifications for ProLiant products. Sign up at:
http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become
available, on a weekly or monthly basis.
The latest software, drivers, and firmware fully optimized and tested for
your ProLiant server and options, available through ProLiant Support
Packs the ProLiant Essentials Rapid Deployment Pack, SmartStart or
downloaded from software and drivers download pages website at:
http://www.hp.com/go/support
Flexible and volume quantity (AKA) license kits are available for
.
.
DA - 13015 Worldwide QuickSpecs — Version 5 — 5.23.2008
Page 5
QuickSpecs
Standard Features
HP ProLiant DL165 Generation 5
Industry Standard
Compliance
Manageability
Security
UPS and PDU Power
Cord Matrix
Power Supply
ACPI V2.0 Compliant
PCI 2.2 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
IPMI 2.0 Compliant
Embedded HP ProLiant Lights-Out 100i Remote Management, with licensable upgrades to LightsOut 100i Select and Lights-Out 100i Advanced.
Power-on password
Setup password
Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and
specifications for UPS and PDU units:
6 system fans ship standard; non-hot plug, non-redundant
Microsoft Windows Small Business Server 2003, R2
Microsoft Windows 2003 and Microsoft Windows 2003/R2 Standard Edition (32-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 Enterprise Edition (32-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 Web Edition (32-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 for Extended Systems Standard Edition
(64-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 for Extended Systems Enterprise
Edition (64-bit)
Microsoft Windows Server 2008
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
Solaris 10
NOTE:
certification information and how to buy server operating systems from HP please visit the OS
product site at:
DA - 13015 Worldwide QuickSpecs — Version 5 — 5.23.2008
Page 6
QuickSpecs
Standard Features
HP ProLiant DL165 Generation 5
Rack Airflow
Requirements
Rack Support
Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for
maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.
CAUTION:
adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow
5,350 sq cm (830 square inches) of hole evenly distributed from top to bottom to permit adequate
airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must
be a minimum of 7 cm (2.75 inches)
CAUTION:
This arrangement ensures proper airflow. Using a rack without blanking panels results in improper
cooling that can lead to thermal damage.
The DL Fixed Rail System supports installation in racks with square or round mounting holes
(including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 24" - 36".
Installation into Telco 2 post, and 4 post, or threaded holes racks requires a 3rd party option kit.
For additional information, please visit:
If a third-party rack is used, observe the following additional requirements to ensure
Always use blanking panels to fill all remaining empty front panel U-spaces in the rack.
www.racksolutions.com
.
HP Factory Express
Capability
HP Enterprise
Configurator
HP Factory Express offers configuration, customization, integration and deployment services for
HP servers and storage products. Customers can choose how their factory solutions are built,
tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading,
asset tagging, and custom packaging. HP products supported through Factory Express include a
wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP
BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries
and configurable network switches.
For more information on Factory Express services for your specific server model please contact
your sales representative or go to
The HP eCo-Enterprise Configurator now provides factory default racking for our HP hardware
portfolio. This approach is aligned with our strategic direction to meet the needs and expectations
of our valued customers. If you require "custom" rack configuration, please contact HP's Customer
Business Center or an Authorized Partner for assistance.
http://www.hp.com/go/factory-express
.
DA - 13015 Worldwide QuickSpecs — Version 5 — 5.23.2008
Page 7
QuickSpecs
Standard Features
HP ProLiant DL165 Generation 5
Service and Support
HP Care Pack Services provide total care and support expertise with committed response
designed to meet your IT and business needs.
HP Care Pack services include coverage for the HP branded hardware options qualified for the
server that are purchased at the same time or afterward and internal to the enclosure. It also
includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items
will be covered at the same service level and for the same coverage period as the server.
Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For
servers or storage systems installed within a rack, service also covers all HP qualified rack
options installed within the same rack.
To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who
thoroughly understands your server technology and systems environment. HP Services, an
industry leader in provision of multi vender support solutions provides a range of support services
designed to meet the varying needs of business. Whether an SMB or large global corporation HP
has a ProLiant server support offer to help you speedily deploy and maximize system uptime.
Recommended Service
management.
Support Service
Deployment Service
Enhanced Service
- Simplify ProLiant solution implementation, maintenance and
-3 Year, 9x5 Next Business Day coverage, excluding HP holidays only
- Hardware Installation only
- Optimize service level to increase IT performance and availability
Support Service
Deployment Service
Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer
Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP
holidays.
For a complete listing of service offerings and information visit:
- 3 Year 13x5 Same Business Day, 4-Hour response coverage
- Installation and Start-up only
DA - 13015 Worldwide QuickSpecs — Version 5 — 5.23.2008
Page 8
QuickSpecs
HP ProLiant DL165 Generation 5
HPC Interconnects
NOTE:
High Performance Computing (HPC) interconnect technologies are available for the DL165 G5 under the Cluster
Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure
to order clusters. Solutions can be defined with a lot of flexibility with the help of configuration tools. Please visit the
following URL to configure HPC Clusters with InfiniBand, Gigabit Ethernet or Myrinet Interconnects:
DA - 13015 Worldwide QuickSpecs — Version 5 — 5.23.2008
Page 9
QuickSpecs
Models
Non Hot Plug Serial ATA (SATA) Models
HP DL165 G5 2346HE
1.8GHz, 2GB, Non-Hot
Plug SATA (1P)
464207-xx1
HP DL165 G5 2352 2.1
GHz, 2GB, Non-Hot
Plug SATA (1P)
445153-xx1
HP DL165G5 2356
2.3GHz, 4GB, Non-Hot
Plug (1P)
445161-xx1
Processor(s)
One of the following
depending on model
Cache Memory
Memory
One of the following
depending on model
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive
Form Factor
(1) AMD Opteron processor Model 2346HE (1.8 GHz, 55W ACP)
(1) AMD Opteron processor Model 2352 (2.1 GHz,75W ACP)
(1) AMD Opteron processor Model 2356 (2.3 GHz, 75W ACP)
2MB shared Level 3 cache
2GB (2 x 1GB) Registered PC2-5300 DDR2 DIMMs (667MHz) with
Advanced ECC capabilities
4GB (2 x 2GB) Registered PC2-5300 DDR2 DIMMs (667MHz) with
Advanced ECC capabilities
Embedded NC7782 dual-port gigabit server adapter
HP Embedded SATA Controller
(1) 160GB NHP SATA HDD
3TB maximum
Optional DVD-ROM, DVD/CD RW
Rack (1U)
HP ProLiant DL165 Generation 5
Hot Plug Serial ATA (SATA)/Serial Attached SCSI (SAS) Models
HP DL165G5 2346HE
1.8 GHz, 2GB, Hot Plug
(1P)
464208-xx1
HP DL165 G5 2352 2.1
GHz, 2 GB Hot Plug
SAS/SATA (1P)
445164-xx1
HP DL165G5 2356 2.3
GHz, 4 GB, Hot Plug
(1P)
445162-xx1
Country Code Key
Processor(s)
One of the following
depending on model
Cache Memory
Memory
One of the following
depending on model
Network Controller
Storage Controller
Hard Drive
Internal Storage
One of the following
depending on model
Optical Drive
Form Factor
xx = 00
xx = 20
xx = 29
xx = 37
xx = 42
xx = AA
(1) AMD Opteron processor Model 2346HE (1.8 GHz, 55W ACP)
(1) AMD Opteron processor Model 2352 (2.1 GHz,75W ACP)
(1) AMD Opteron processor Model 2356 (2.3 GHz, 75W ACP)
2MB shared Level 3 cache
2 GB (2 x 1GB) Registered PC2-5300 DDR2 DIMMs (667MHz) with
Advanced ECC capabilities
4GB (2 x 2GB) Registered PC2-5300 DDR2 DIMMs (667MHz) with
Advanced ECC capabilities
Embedded NC7782 dual-port gigabit server adapter
HP 8 Internal Port SAS HBA with RAID
None ship standard (up to 4 Hot Plug SATA or SAS drives supported)
SATA: 4.0TB Maximum
SAS: 1.2TB Maximum
Optional DVD-ROM, DVD/CD RW
Rack (1U)
U.S.
Brazil
(Model 445164-201 only)
Japan
APD
Euro
PRC
DA - 13015 Worldwide QuickSpecs — Version 5 — 5.23.2008
Page 10
QuickSpecs
Configuration Information - Factory Integrated Models
HP ProLiant DL165 Generation 5
NOTE:
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE:
start with a CTO Chassis.
NOTE:
NOTE:
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must
This product offering does not support HP Factory Express Server Configuration Level 1.
FIO indicates that this option is only available as a Factory Installable Option.
Step 1: Base Configuration
Non-Hot Plug Model
HP ProLiant DL165 G5 Non- Hot Plug SATA Rack Chassis
Factory Integrated Model ships with:
Embedded NC7782 dual-port gigabit server adapter
Two available PCI-Express slots, including one full-length/full height and one
low-profile/half height slot
HP embedded SATA controller
650 Watt Power Supply
6 Fixed, Non-Redundant Fans
Rack (1U), (1.75 in / 4.45 cm)
Fixed Mounting Rails
Hot Plug Model
HP ProLiant DL165 G5 Hot Plug SATA/SAS Rack Chassis
Factory Integrated Model ships with:
Embedded NC7782 dual-port gigabit server adapter
One full-length/full height PCI-Express slot. Low-profile/half height slot houses
the SATA/SAS storage controller
HP SC40Ge SAS HBA with RAID 0,1
650 Watt Power Supply
6 Fixed, Non-Redundant Fans
Rack (1U), (1.75 in / 4.45 cm)
Fixed Mounting Rails
445147-B21
445148-B21
Step 2: Choose Required Options (only one of the following from each list unless
otherwise noted)
If 2 processors are desired, select one 445981-L21 and one 445981-
If 2 processors are desired, select one 445974-L21 and one 445974-
If 2 processors are desired, select one 445971-L21 and one 445971-
If 2 processors are desired, select one 464210-L21 and one 464210-
DA - 13015 Worldwide QuickSpecs — Version 5 — 5.23.2008
445981-L21
445974-L21
445971-L21
464210-L21
Page 11
QuickSpecs
Configuration Information - Factory Integrated Models
HP ProLiant DL165 Generation 5
Memory
Hard Drive
Backplane Option
1 GB REG PC2-5300 2 x 512 MB Single Rank Kit
2 GB REG PC2-5300 2 x 1 GB Single Rank Kit
4 GB REG PC2-5300 2 x 2 GB Dual Rank Kit
8 GB REG PC2-5300 2 x 4 GB Dual Rank Kit
2 GB REG PC2-5300 2 X 1 GB Low Power Single Rank Kit
4 GB REG PC2-5300 2 X 2 GB Low Power Single Rank Kit
8 GB REG PC2-5300 2X 4 GB Low Power Dual Rank Kit
Serial-ATA (SATA) Non-Hot Plug Hard Drives
SATA Non-Hot Plug Entry (ETY) Drives
HP 160GB 1.5G SATA 7.2K NHP 3.5" ETY HDD
SATA Non-Hot Plug Midline (MDL) Drives
HP 250GB 1.5G SATA 7.2K NHP 3.5" MDL HDD
HP 500GB 1.5G SATA 7.2K NHP 3.5" MDL HDD
HP 750GB 1.5G SATA 7.2K NHP 3.5" MDL HDD
Serial-ATA (SATA) Hot Plug Hard Drives
SATA Hot Plug Entry (ETY) Drives
HP 160GB 1.5G SATA 7.2K 3.5" ETY HDD
SATA Hot Plug Midline (MDL) Drives
HP 250GB 1.5G SATA 7.2K 3.5" MDL HDD
HP 500GB 1.5G SATA 7.2K 3.5" MDL HDD
HP 750GB 1.5G SATA 7.2K 3.5" MDL HDD
HP 1TB 1.5G SATA 7.2K 3.5" MDL HDD
NOTE:
QuickSpecs for Technical Specifications such as capacity, height, width,
interface, transfer rate, seek time, physical configuration, and operating
temperature:
required if ordering third or fourth Hard Drives for Hot Plug models only. 445985B21
SATA drives have a 1 year warranty. Please see the SATA Hard Drive
The purchase of an HP SAS HBA or Smart Array controller is required
Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is
(Non-Hot Plug Models Only)
(SATA/SAS Hot Plug Models Only)
(SATA/SAS Hot Plug
408850-B21
408851-B21
408853-B21
408854-B21
483399-B21
483401-B21
483403-B21
458947-B21
458939-B21
458941-B21
462595-B21
458945-B21
458926-B21
458928-B21
458930-B21
454146-B21
384852-B21
375870-B21
384854-B21
375872-B21
416127-B21
431944-B21
445985-B21
DA - 13015 Worldwide QuickSpecs — Version 5 — 5.23.2008
Page 12
QuickSpecs
Configuration Information - Factory Integrated Models
HP ProLiant DL165 Generation 5
Storage Controllers
Power Supply
HP SC44Ge Host Bus Adapter
HP SC40Ge 4INT PCIe SAS RAID Half Height HBA, FIO
HP Smart Array E500/256MB Controller with Battery, FIO
NOTE:
Customers can only order one Smart Array E500/256MB Controller and
one Battery-backed write cache upgrade (P/N 383280-B21) for the HP ProLiant
DL165 G5 server based on battery space.
256MB Battery-backed write cache upgrade for RAID 5 support
NOTE:
when installing a battery-backed write cache module, the HP Smart Array
E500 must be installed in the full-length PCI slot
HP Smart Array E200/128 BBWC Controller
HP High Efficiency Power Supply Kit, FIO
NOTE:
Selection of the HE Power Supply Unit will remove the 650 Watt
standard power supply and requires the purchase of Power Supply Backplane
(p/n 453652-B21)
Power Supply Backplane
NOTE:
This backplane must be ordered with the high efficiency power supply
(P/N 453650-B2).
Step 3: Choose Additional Options for Factory Integration
NOTE:
integration. Please contact an HP sales representative for additional information.
For additional options, please refer to the "Options" section below. Some options may not be available for factory
416096-B21
449363-B21
462105-B21
383280-B21
411508-B21
453650-B21
453652-B21
DA - 13015 Worldwide QuickSpecs — Version 5 — 5.23.2008
Page 13
QuickSpecs
Options
HP ProLiant DL165 Generation 5
Server Management
Stand Alone Software
Product and ProLiant
Essentials
NOTE:
select ProLiant Essentials software products. Please see the appropriate Insight
Control and ProLiant Essentials QuickSpecs for additional information
DEPLOY
Rapid Deployment Pack
ProLiant Essentials Rapid Deployment Pack No Media 1-Server License
including 1 year of 24x7 Technical Support and Updates
NOTE:
Customer will receive a printed license entitlement certificate via physical
shipment. The license entitlement certificate must be redeemed online or via fax
in order to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support and Update Service
Essentials Value Packs. Refer to:
or the various ProLiant Essentials Value Pack product QuickSpecs for more
information.
NOTE:
the following URL:
Control
NOTE:
select ProLiant Essentials software products. Please see the appropriate Insight
Control and ProLiant Essentials QuickSpecs for additional information
Lights-Out 100i Select Pack
HP Lights Out 100i Select Pack, No Media, 1-Server License
NOTE:
Lights-Out 100i Advanced Pack
HP Lights Out 100i Advanced Pack, No Media, 1-Server License
NOTE:
NOTE:
Lights-Out 100i Select and Lights-Out 100 Advanced Pack licenses as well as
Electronic License To Use (E-LTU). AKA Tracking licenses require a 100 unit
minimum forecast at initial contract signing. For these additional part numbers,
please refer to each software products’ QuickSpecs at this link for more
information:
For an up-to-date listing of the latest O/S and software support details for HP
Ultrium tape drives, please visit:
Rack-Mount Tape Drive Enclosures
HP StorageWorks 1U SCSI Rack-Mount kit
NOTE:
is compatible with multiple Single-Ended and LVD SCSI tape drives including the
DAT 40, DAT 72, DAT 160, LTO-1 Ultrium 232, LTO-2 Ultrium 448 and LTO-3
Ultrium 920 tape drives.
HP StorageWorks 1U USB Rack-Mount Kit
NOTE:
and is compatible with the DAT 40 USB, DAT 72 USB and DAT 160 tape drives.
HP StorageWorks 1U SAS Rack-Mount Kit
NOTE:
and is compatible with the DAT 160 SAS, LTO-2 Ultrium 448 SAS, LTO-3
Ultrium 920 SAS and LTO-4 Ultrium 1760 tape drives.
HP StorageWorks FC2242SR Dual Channel 4 Gb PCI-e HBA
HP StorageWorks FC1142SR 4Gb PCI-e HBA
HP StorageWorks FC1242SR Dual Channel 4 Gb PCI-e HBA
HP StorageWorks FC2143 4Gb PCI-X 2.0 - to Fibre Channel HBA
StorageWorks SCSI HBA
HP U320e SCSI Host Bus Adapter
NOTE:
multi-drive MSL tape libraries to ProLiant servers
HP USB Internal Cable Kit
1.44MB External USB Floppy Drive All
USB Floppy Drive
USB P/S2 Optical Mouse
USB Standard Keyboard All
The following is a list of all Fibre Channel Host Bus Adapters for
Recommended Dual Channel Ultra320 SCSI Controller for connecting
A8002A
A8003A
AE311A
AE312A
AD167A
AH627A
451363-B21
DC141B
DC361B
DC369A
DT528A#
DA - 13015 Worldwide QuickSpecs — Version 5 — 5.23.2008
Page 20
QuickSpecs
Options
HP ProLiant DL165 Generation 5
HP KVM Switch
Options
Service and Support
Offerings
(HP Care Pack Services)
HP 1x4 Console Switch
HP PS2 Server Console Cable, 6 foot, 2-Pack
HP USB Server Console Cable, 6 foot, 2-Pack
NOTE:
NOTE:
servers, rack mount monitors, keyboards and all related options please see the
following URL:
Hardware Services 4-Hour On-site Service
13-Hour x 5-Day Coverage, 3 Years, Electronic
24-Hour x 7-Day Coverage, 3 Years, Electronic
Hardware Services Next Business Day On-Site Service
9-Hour x 5-Day Coverage, 3 Years, Electronic
Hardware Services 6-Hour Call to Repair On-Site Service
9-Hour x 5-Day Coverage, 3 Years, Electronic
Hardware Installation, Electronic
NOTE:
http://www.hp.com/services/carepack
required for supporting USB peripheral
For additional information regarding KVM switches, Serial Console
http://www.hp.com/go/kvm
For more information, customer/resellers can contact:
AF611A
AF612A
AF613A
U9509E
U9510E
U9508E
U9511E
U9520E
DA - 13015 Worldwide QuickSpecs — Version 5 — 5.23.2008
Page 21
QuickSpecs
HP ProLiant DL165 Generation 5
Memory
NOTE:
Memory configurations listed do not apply to "Factory Integrated Models".
HP ProLiant DL165 G5 (all models)
Standard Memory
2 GB (2 x 1 GB) PC2-5300 DIMM memory, with Advanced ECC Capabilities memory installed.
Maximum Memory
Up to 32GB memory is available with the optional installation of PC2-5300 Registered DIMM memory kits.
Memory should be installed in pairs and matched for optimum performance.
NOTE:
Chart does not represent all possible memory configurations.
Memory
Standard (2 GB)
Maximum (32 GB)
Following are memory options available from HP:
1 GB REG PC2-5300 2 x 512 MB Single Rank Kit
2 GB REG PC2-5300 2 x 1 GB Single Rank Kit
4 GB REG PC2-5300 2 x 2 GB Dual Rank Kit
8 GB REG PC2-5300 2 x 4 GB Dual Rank Kit
2 GB REG PC2-5300 2 X 1 GB Low Power Single Rank Kit
4 GB REG PC2-5300 2 X 2 GB Low Power Single Rank Kit
8 GB REG PC2-5300 2 X 4 GB Low Power Dual Rank Kit
with tape drive) deactivates 1 of the hard drive bays. Actual hard drive bay deactivated depends on where split cable plugs
into SAS drive connector. Example: 3x SAS cable connector plugged into SAS drive connector (5-8) on the back of the hard
drive cage would mean drive bay 8 is deactivated.
HP StorageWorks SCSI
Tape Drives, External
LTO-1 Ultrium 232
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO-3 Ultrium 960
LTO-4 Ultrium 1840
DAT 40
DAT 72
DAT 160
1U Rack-Mount Kit
3U Rack-Mount Kit
HP StorageWorks USB
Tape Drives, External
DAT 40 USB
DAT 72 USB
DAT 160 USB
1U USB Rack-Mount Kit
HP StorageWorks SAS
Tape Drives, External
DAT 160 SAS
LTO-2 Ultrium 448 SAS
LTO-3 Ultrium 920 SAS
LTO-4 Ultrium 1760 SAS
LTO-4 Ultrium 1840 SAS
1U Rack-Mount Kit
3U Rack-Mount Kit
HP StorageWorks SCSI
Tape Automation,
External
DAT 72x10 Autoloader
1/8 G2 Autoloader
MSL2024
For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the
(Worldwide)
For an up-to-date listing of the latest O/S Support details for each of the Tape Autoloaders and Tape Libraries listed
(Worldwide)
For complete listing of tape drive offerings see
SAS Tape Drives: Connecting hard drive cage and SAS tape to the same SAS Controller using split cable (supplied
Position
Supported
External
External
External
External
Controller
HP SC11Xe Host Bus Adapter
USB 2.0 Port
HP SC44Ge Host Bus Adapter.
HP SC11Xe Host Bus Adapter
HP U320e SCSI Host Bus Adapter
NOTE:
Recommended for MSL tape libraries.
Controller Part
Number
412911-B21
N/A
416096-B21
412911-B21
AH627A
DA - 13015 Worldwide QuickSpecs — Version 5 — 5.23.2008
Page 24
QuickSpecs
Storage
MSL4048
MSL8096
MSL6000
HP StorageWorks SAS
Tape Automation,
External
1/8 G2 Autoloader
MSL2024
MSL4048
MSL8096
HP StorageWorks Fibre
Tape Automation,
External
MSL2024
MSL4048
MSL8096
MSL6000
HP StorageWorks D2D
Backup Systems
D2D110
D2D120
D2D130
External Storage
Modular Smart Array 50
Enclosure
HP StorageWorks
Modular Smart Array 60
HP StorageWorks
Modular Smart Array 70
External
External
External
Quantity
Supported
Up to 2
Up to 2
Up to 2
HP ProLiant DL165 Generation 5
HP SC44Ge Host Bus Adapter
Please consult the EBS connectivity matrix at:
http://www.hp.com/go/ebs
Embedded Network Controller
Position
Supported
External
External
External
Controller
HP Smart Array E500/256MB controller
HP Smart Array E500/256MB controller
HP Smart Array E500/256MB controller
for detailed connectivity information.
416096-B21
N/A
N/A
DA - 13015 Worldwide QuickSpecs — Version 5 — 5.23.2008
Page 25
QuickSpecs
Power Specifications
HP ProLiant DL165 Generation 5
Operational Input
Voltage Range (Vrms)
Frequency
(Nominal) (Hz)
Power Output
Server Power Cords
Range
90Vac to 264Vac full range at 25oC ambient
47 Hz to 63 Hz
650W Nominal
One 6' Highline (IEC-IEC) power cord ships standard
NOTE:
that allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are
primarily connected to PDU's in data center racks so they now ship standard with only a PDU
power cord (416151-B21). If a user wishes to power a ProLiant DL server using a 110V receptacle
(NEMA-15), the NEMA power cord (227099-001) must be ordered separately.
If customers require a local power cord, they can check the power cord matrix for the appropriate
cord. Please see the following power cord matrix:
HP ProLiant DL servers no longer ship standard with NEMA power cords (163719-002)
http://www.hp.com/go/powercordmatrix
.
DA - 13015 Worldwide QuickSpecs — Version 5 — 5.23.2008
Page 26
QuickSpecs
Technical Specifications
HP ProLiant DL165 Generation 5
System Unit
Dimensions
(H x W x D)
(with bezel)
Weight
(approximate)
Input Requirements
(per 650W power
supply)
BTU Rating
Power Specifications
1.70 x 17.64 x 26.85 in (4.32 x 44.80 x 68.20 cm)
Maximum
(all hard drives, power
supplies, and processors
installed)
Minimum
(one hard drive, power
supply, and processor
installed)
Rated Line Voltage
Rated Input Current
Rated Input Frequency
Rated Input Power
Maximum
To review typical system power ratings use the Power Calculator which
is available via the online tool located at URL:
- Click on the system of interest. Example: DL165 G5
- Follow the instructions of the next screens.
Rated Steady-State Power
Maximum Peak Power
650 W (at 100 VAC),
650 W (at 200 VAC)
700 W (at 100 VAC),
700 W (at 200 VAC)
90-132 VAC,
200-240 VAC
9.4 A (at 115 VAC),
7.8 A (at 230 VAC)
47 to 63 Hz
1075 W (at 100 VAC),
1375W (at 200 VAC)
3070.93 BTU/hr (at 100 VAC),
4094.57 BTU/hr (at 200 VAC)
900 W (at 100 VAC),
1200 W (at 200 VAC)
900 W (at 100 VAC),
1200 W (at 200 VAC)
DA - 13015 Worldwide QuickSpecs — Version 5 — 5.23.2008
Page 27
QuickSpecs
Technical Specifications
HP ProLiant DL165 Generation 5
System Inlet
Temperature
Relative Humidity
(non-condensing)
Altitude
Acoustic Noise
Operating
Non-operating
Operating
Non-operating
Operating
Non-operating
Listed are the declared A-Weighted sound power levels (LWAd) and
declared average bystander position A-Weighted sound pressure levels
(LpAm) when the product is operating in a 23°C ambient environment.
Noise emissions were measured in accordance with ISO 7779 (ECMA
74) and declared in accordance with ISO 9296 (ECMA 109).
Idle
LWAd
LpAm
Operating
LWAd
LpAm
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change
is 10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if
operating with a fan fault or above 30°C
(86°F).
-30° to 60°C (-22° to 140°F). Maximum rate
of change is 20°C/hr (36°F/hr).
10 to 90% relative humidity (Rh), 28°C
(82.4°F) maximum wet bulb temperature,
non-condensing.
5 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature,
non-condensing.
3050 m (10,000 ft). This value may be limited
by the type and number of options installed.
Maximum allowable altitude change rate is
457 m/min (1500 ft/min).
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500
ft/min).
6.82 B
51.93 dBA
6.84 B
51.93 dBA
DA - 13015 Worldwide QuickSpecs — Version 5 — 5.23.2008
Page 28
QuickSpecs
Technical Specifications
HP ProLiant DL165 Generation 5
HP 160GB 1.5G SATA
7.2K NHP 3.5" ETY HDD
458947-B21
Embedded SATA
Controller
160-GB 7.2K
Drives Supported
Channels
Storage Capacity
Data Transfer Method
Maximum SATA
Channel Transfer Rate
Maximum Transfer
Rate per PCI Bus
Protocols
Cable
Internal ATA
Connectors
(peak)
Capacity
Height
Width
Depth
Interface
Transfer Rate
Synchronous
(Maximum)
Native Command
Queuing
Seek Time
(typical reads, including
settling)
Physical Configuration
Operating Temperature
Up to 4 SATA devices
4 1.5Gb SATA
2.0TB internal storage
32-bit/33-MHz PCI bus-master
1.5Gb/s per channel
266 MB/s per channel
SATA
PIO Mode[0-4]
SATA
Four SATA connectors
160,041 MB
1.028 in (2.61 cm)
4.0 in (10.16 cm)
5.787 in (147.0 mm)
Serial ATA
1.5Gb/s
N/A
Single Track
Average
Full-Stroke
Rotational Speed
Bytes/Sector
Logical Blocks
41° to 131° F (5° to 55° C)
2.0 ms
<11 ms
23.0 ms
7,200 rpm
512
312,581,808
HP 8 Internal Port SAS
HBA with RAID
Drives Supported
Channels
Storage Capacity
Data Transfer Method
Maximum SAS Channel
Transfer Rate
Maximum SAS transfer
rate
Protocols Supported
Internal Connectors
DA - 13015 Worldwide QuickSpecs — Version 5 — 5.23.2008
Up to 4 SATA/SAS drives
4
1.2TB SAS, 4.0TB SATA
PCI-Express
3Gb/s per channel
300Mb/sec per port
SSP, STP, SMP
1 SAS
Page 29
QuickSpecs
Technical Specifications
HP ProLiant DL165 Generation 5
Embedded NC7782
dual-port gigabit server
adapter
Environment-friendly
Products and
Approach
Network Interface
Compatibility
Data Transfer Method
Network Transfer Rate
Connector
Cable Support
End-of-life
Management and
Recycling
10Base-T/
100Base-TX/
1000Base-TX
IEEE 802.3 10Base-T
IEEE 802.3 1000Base-T
IEEE 802.3 100Base-TX
PCI-X
10Base-T (Half-Duplex)
10Base-T (Full-Duplex)
100Base-TX (HalfDuplex)
100Base-TX (FullDuplex)
1000Base-TX
(Half and Full-Duplex)
RJ-45
10Base-T
10/100/1000Base-TX
Hewlett-Packard offers end-of-life HP product return, trade-in, and
recycling programs in many geographic areas. For trade-in information,
please go to:
please go to:
sales office. Products returned to HP will be recycled, recovered or
disposed of in a responsible manner.
. To recycle your product,
or contact your nearest HP
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by treatment
facilities. This information (product disassembly instructions) is posted
on the Hewlett Packard web site at:
instructions may be used by recyclers and other WEEE treatment
facilities as well as HP OEM customers who integrate and re-sell HP
equipment.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. AMD, Opteron, and Hyper-Transport are
trademarks of AMD Corporation in the United States and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
http://www.hp.com/go/green
. These
DA - 13015 Worldwide QuickSpecs — Version 5 — 5.23.2008
Page 30
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.