HP DL165 User Manual

Download

QuickSpecs

Overview

HP ProLiant DL165 Generation 7

Hot Plug SAS/SATA or Non-Hot Plug SATA Models

Front View:

Access panel

System fans

Front-panel USB 2.0 ports

Power switch/system status LEDs

Standard 1st , 2nd , 3rd and 4th 3.5" hot-plug SAS/SATA or non-hot plug SATA hard drive bays

Optical drive bay

Twenty Four DIMM Slots

Slot 1:Full-length/Full height x16 PCI-Express Gen2 slot, or Slot 1: Half-length/Full height x16 PCI-Express Gen2 slot and Slot 2: Low Profile x4 PCI-Express Gen2 slot (accepts x8 cards, internal only)

Two (2) AMD Opteron 6100 series processors

Rear View:

Power supply

Optional SD Card Reader

Unit Identification LED (UID)

Two USB ports

Optional Lights-Out 100 10/100Mbps port

Serial port

(2) RJ45 GbE LAN ports (3rd & 4th port)

VGA port

(2) RJ45 GbE LAN ports (1st & 2nd port)

10.

At A Glance

Introducing the HP ProLiant DL165G7, now available with the latest high performance Opteron Eight and Twelve Core processors, 24 DDR3 memory DIMMs, 2 PCIe Gen2 slots, four NIC ports and an Easy Setup CD.

Processors

Memory

Internal Drive Support

: Supports up to two AMD Opteron™ 6000 series Eight and Twelve Core processors Supports DirectConnect Architecture Supports Power Now

: Up to 256GB, using 2x8GB Dual-Rank and 1x16GB Quad-Rank PC3-8500R-7 DDR3 Registered (RDIMM) memory per memory channel, operating at 800MHz in 24 slots. (See memory section for population rules) Up to 192GB, using 8GB PC3-10600R or PC3-8500R DDR3 Registered (RDIMM) memory, operating at 800MHz when populated at 3 DIMMs per Channel in 24 slots. Up to 64GB, using PC3-10600E DDR3 Unbuffered (UDIMM) memory, operating at 1066MHz when populated at 2 DIMMs per Channel in 16 slots.

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 1

QuickSpecs

Overview

Internal storage capacity:

SATA Capacity: Support for up to 8.0TB (4 x 2TB) with Hot Plug Model. 8.0TB (4 x 2TB) with Non Hot Plug Model SAS Capacity: Support for up to 8.0 TB (4 x 2TB) with Hot Plug Model

Network Controller

(2) HP NC362i Integrated Dual Port Gigabit Server Adapter (4 ports total)

Storage Controllers

Non-Hot Plug SATA Models: HP Embedded B110i SATA Smart Array RAID Controller Cold Plug SATA Models: HP Embedded B110i SATA Smart Array RAID Controller Hot Plug SATA/SAS Models: HP P410 Smart Array Controller or HP Smart Array Hot Plug Advance Pack for B110i SATA RAID license key upgrade.

Expansion Slots

Standard - PCI-Express assembly includes:

Slot 1: Either full-length/full height PCI-Express Gen2 x16 or half-length/full height when internal slot is installed Slot 2: half-length/low-profile PCI-Express Gen2 x4 (x8 connector) (Internal ONLY)

Infrastructure Management

HP Lights-Out 100 with optional LO100 Advanced Licenses for Virtual KVM and Virtual Media. HP Insight Control for Linux, a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, migrate, monitor, control and optimize your IT infrastructure through a single, simple management console. Insight Control for Linux supports Linux-based central management servers.

USB Ports

Optical Drive

Power Supply

Form Factor

Deployment/Serviceability

Warranty

Up to Six USB ports (two front & two rear standard, 2 internal option)

Support for one (optional): Slim 9.5 mm DVD-ROM or DVD/CD RW

500W Power Supply [Non-Hot Plug, PFC (Autoswitching)] Optional FIO high-efficiency pluggable power supplies: 750W Power Supply

: Rack (1U) Fixed mounting rails included with all models

HP ProLiant DL165 G7 models have tool-less fixed rails which provide support for racks with round mounting holes and tool-free support for racks with square mounting holes (including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 26" - 36 Tool-less access to all system components for easy serviceability Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement

: This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.

NOTE:

Server Warranty includes 3 year Next Day Parts replacement, 0-Years Labor, 0-Years Onsite support. Warranty terms may vary by region. Additional information regarding worldwide limited warranty and technical support is available at:

HP ProLiant DL165 Generation 7

http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 2

QuickSpecs

Standard Features

NOTE:

For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information -

Factory Integrated Models" section.

Processor

One of the following depending on Model

AMD Opteron™ Processor Model 6128 (2.0 GHz, 12MB Level 3 Cache, 80W)

AMD Opteron™ Processor Model 6128HE (2.0 GHz, 12MB Level 3 Cache, 65W)

AMD Opteron™ Processor Model 6134 (2.3 GHz, 12MB Level 3 Cache, 80W)

NOTE:

Available through Configure To Order only. See Factory Integration Models section for

more details.

AMD Opteron™ Processor Model 6136 (2.4 GHz, 12MB Level 3 Cache, 80W)

AMD Opteron™ Processor Model 6164HE (1.7 GHz, 12MB Level 3 Cache, 65W)

NOTE:

Available through Configure To Order only. See Factory Integration Models section for

more details.

AMD Opteron™ Processor Model 6172 (2.1 GHz, 12MB Level 3 Cache, 80W)

AMD Opteron™ Processor Model 6174 (2.2 GHz, 12MB Level 3 Cache, 80W)

NOTE:

Available through Configure To Order only. See Factory Integration Models section for

more details.

HP ProLiant DL165 Generation 7

Upgradeability

Chipset

Cache Memory

Memory Protection

Memory

One of the following depending on Model

Upgradeable to two processors

AMD Chipset SR5670/SP5100

Model Series 6000

12MB shared L3

Advanced ECC

Type

Standard

Maximum (RDIMM)

Maximum (UDIMM)

NOTE:

Depending on the memory configuration and processor model, the memory speed may run at 1333MHz, 1066MHz, or 800MHz. Please see the Online Memory Configuration Tool at:

www.hp.com/go/ddr3memory-configurator

DDR3 Registered (RDIMM) or Unbuffered (UDIMM)

Entry Model

Base Model

Performance Model

Efficiency Model

256 GB

64 GB

DDR3 memory options part number decoder

4 GB (2 x 2 GB) RDIMMs

8 GB (4 x 2 GB) RDIMMs

16 GB (8 x 2 GB) RDIMMs

4 GB (2 x 2 GB) RDIMMs

(8 x 16 GB + 16 x 8 GB)

(16 x 4 GB)

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 3

QuickSpecs

Standard Features

HP ProLiant DL165 Generation 7

Network Controller

Expansion Slots #

***

Storage Controller

(2) HP NC362i Integrated Dual Port Gigabit Server Adapter

Technology

PCI-Express

2.0

PCI-Express

2.0

* Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number. ** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the lowest bus). ***In order to access expansion slot #2, the low profile internal only slot, expansion slot #1 may only be populated with a half length, full height form factor card.

Non-Hot Plug SATA

Cold Plug SATA Models

Hot Plug SATA/SAS

NOTE:

A diskette drive or virtual FDD using LO100 Advanced Pack is needed to install storage

controller drivers during a Windows operating system installation from a CD.

NOTE:

Addition of the battery backed cache upgrade enables BBWC, RAID 5, 5+0, array

expansion, logical drive extension, RAID migration, and stripe size migration.

NOTE:

RAID 6 functionality requires the addition of Smart Array Advanced Pack (P/N: 516471-

B21).

Bus

Width

x16 x16

x4 x8

Connector

HP Smart Array B110i SATA RAID Controller

NOTE:

CD to download driver, hpahcisr.sys, is part of the 8.20 PSP, Smart Start, EZSetup CD. For more information on Smart Array B110i, go to:

www.hp.com/go/sataraid

HP Smart Array B110i SATA RAID Controller

NOTE:

HP Smart Array P410 Controller (RAID 0/1/1+0) HP Smart Array P410 Controller 256 BBWC (RAID/0/1/1+0/5/5+0)

NOTE:

HP Smart Array B110i SATA RAID Controller

NOTE:

Advanced Pack License Key upgrade (P/N TC421A)

NOTE:

CD to download driver, hpahcisr.sys, is part of the 8.20 PSP, Smart Start, EZSetup CD. For more information on Smart Array, go to:

www.hp.com/go/sataraid

Bus

Width

To enable RAID for embedded SATA controller, use EZ set-up

Supported on LFF models only.

Transfer rate: up to 3 Gb/s SATA, up to 6 Gb/s SAS.

Hot plug functionality requires the addition of a Smart Array

To enable RAID for embedded SATA controller, use EZ set-up

Number

5 0

2 0

Device No.

Form

Factor

Full

Height/Full

Length

Low Profile,

Internal Only

Notes

3.3 volts

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 4

QuickSpecs

Standard Features

HP ProLiant DL165 Generation 7

Storage

Maximum Internal Storage

Interfaces

Diskette Drives

Optical Drives

Hard Drives

Non-Hot Plug LFF SATA

Hot Plug LFF SATA

Hot Plug LFF SAS

Hot Plug SFF SAS

Parallel

Network RJ-45(Ethernet)

Serial

Pointing Device (Mouse)

Graphics

Keyboard

USB

Via USB only

Optional SATA 9.5mm DVD-ROM Optical Drive

Optional SATA 9.5mm DVD RW Optical Drive

Up to 4 Non-hot plug SATA 3.5" drives

Up to 4 Hot plug SAS/SATA 3.5" drives

Up to 8 Hot plug SAS/SATA 2.5" drives

8.0TB

4.0TB

None

4 10/100/1000 NIC ports (plus 1 optional dedicated port for the HP ProLiant Lights Out 100i Remote Management)

0 (via USB only)

6 (two front, two internal, two rear)

NOTE:

One optional internal USB connector is reserved for connection

to the rear SD Card Reader (592710-B21)

NOTE:

In order to connect a USB device internally, the internal USB

Cable G6 Kit must be used (536769-B21)

NOTE:

Please see the following URL for additional information regarding USB support:

http://h18004.www1.hp.com/products/servers/platforms/usbsupport.html

4 x 2TB

8 x 500GB

Graphics

Form Factor

32MB shared supporting all display resolutions up to 1600x1200 16bpp@75Hz

NOTE:

8MB is dedicated to video memory.

Rack (1U), (1.75 in/4.45 cm)

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 5

QuickSpecs

Standard Features

HP ProLiant DL165 Generation 7

Embedded Manageability

HP LO100 Advanced

HP Lights-Out 100 with Optional LO100 Advanced Licenses for Virtual KVM and Virtual Media.

Standard Features:

Embedded IPMI standard reporting System event log access Remote Serial console (serial redirection) Browser, Telnet access SMASH-CLP compliant IPMI 2.0 compliant Secure Socket Layer (SSL) Encryption Secure Shell (SSH) Encryption

Licensed Features:

Virtual media (Floppy, CD, USB 2.0) Virtual KVM

NOTE:

Flexible and volume quantity (AKA) license kits are available for the Lights-Out 100 Advanced Pack licenses as well as Electronic License To Use (E-LTU). AKA Tracking licenses require a 100 unit minimum forecast at initial contract signing. For these additional part numbers, please refer to each software products. QuickSpecs at this link for more information:

www.hp.com/go/lo100

HP Insight Control management software

HP Insight Control for Linux

Insight Control server deployment

HP Insight Control for Linux, as a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, monitor, remote control, and optimize your IT infrastructure through a single, simple management console. The Insight Control for Linux installs and license software modules that are integrated into HP System Insight Manager.

The HP Insight Control for Linux (IC-Linux) serves environments requiring a Linux-based management consoles. See:

www.hp.com/go/ic-linux

HP Insight Control include one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit:

HP Insight Control server deployment is a deployment solution for HP ProLiant and Integrity servers hosted on a Windows CMS. It automates the process of deploying and provisioning server software, enabling companies to quickly and easily adapt to changing business demands. Insight Control server deployment includes software optimizations for HP servers, including the HP scripting toolkits, configuration jobs for leading industry-standard operating systems, sample unattended files, and HP server support packs that include software drivers, management agents, and important documentation. Deploying servers can be accomplished either through imaging or through scripting.

http://www.hp.com/services/insight

Insight Control server deployment is hosted on a Windows server and is intended for heterogeneous environments deploying Windows, Linux, VMware ESX and Microsoft Hyper-V systems.

Insight Control server deployment includes one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 6

QuickSpecs

Standard Features

HP ProLiant DL165 Generation 7

information about this service, please visit:

http://www.hp.com/services/insight

Industry Standard Compliance

Security

Security - Trusted Platform Module

ACPI V2.0 Compliant

PCI 2.2 Compliant

PXE Support

WOL Support

Microsoft® Logo certifications

IPMI 2.0, SMASH CLP, DCMI 1.0 compliant

Power-on password

Setup password

Diskette boot control

Secure Sockets Layer (SSL)

Secure Shell (SSH)

The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used to authenticate the server platform. These artifacts can include passwords, certificates and encryption keys. Windows® BitLocker™ Drive Encryption (BitLocker) is a data protection feature available in Windows Server® 2008. BitLocker leverages the enhanced security capabilities of a Trusted Platform Module (TPM) version 1.2. The TPM works with BitLocker to help protect user data and to ensure that a server running Windows Server 2008 has not been tampered with while the system was offline.

Server Power Cords

UPS and PDU Power Cord Matrix

Power Supply

NOTE:

For more information about TPM, including a white paper, go to:

http://www.hp.com/go/TPM

NOTE:

ProLiant OS pre-installed units will come with the partition required for TPM deployment.

NOTE:

The TPM key is unique to every TPM deployed server and must be retained. Misplacing

or losing the key could result in data loss.

One 6' Highline (IEC-IEC) power cord ships standard

NOTE:

HP ProLiant DL servers no longer ship standard with NEMA power cords (163719-002) that allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily connected to PDU's in data center racks so they now ship standard with only a PDU power cord (416151-B21). If a user wishes to power a ProLiant DL server using a 110V receptacle (NEMA-15), the NEMA power cord (227099-001) must be ordered separately.

If customers require a local power cord, they can check the power cord matrix for the appropriate cord. Please see the following power cord matrix:

Please see the UPS and PDU cable matrix's on the HP Power Protection and Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That link will list cable descriptions, requirements, and specifications for UPS and PDU units. Please see the following link:

www.hp.com/products/powercords

500 Watts, auto-switching, high efficiency, PFC (Power Factor Correcting).

NOTE:

Factory upgradeable to high-efficiency 750W pluggable power supply.

http://www.hp.com/go/powercordmatrix

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 7

QuickSpecs

Standard Features

HP ProLiant DL165 Generation 7

System Fans

Operating Systems and Virtualization Software Support for ProLiant Servers

Rack Airflow Requirements

4 non-hot plug system fans ship standard with 1P models, optional upgrade to N+1 redundant. 7 non-hot plug system fans ship standard with 2P models, N+1 Redundant Standard

Microsoft Windows Server Microsoft Windows Server 2008 Hyper V Red Hat Enterprise Linux (RHEL) SUSE Linux Enterprise Server (SLES) Solaris 10 for x86/x64 based Systems VMware Citrix Essentials for XenServer (Retail)

NOTE:

For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server, please visit our Support Matrix at:

http://www.hp.com/support/DL165G7

Rack 10000 G2 series Cabinets

The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 G2 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.

CAUTION:

adequate airflow and to prevent damage to the equipment:

If a third-party rack is used, observe the following additional requirements to ensure

http://www.hp.com/go/supportos

and our driver download page

Rack Support

Telco Rack Support

Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 5,350 sq cm (830 square inches) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation). Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 7 cm (2.75 inches)

CAUTION:

rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.

NOTE:

CD provided with the server, or to the server documentation located in the Support section at the following URL:

The DL Fixed Rail System supports installation in racks with square or round mounting holes (including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 24" - 36".

Installation into Telco 2 post, and 4 post, or threaded holes racks requires a 3rd party option kit. For additional information, please visit:

NOTE:

Always use blanking panels to fill all remaining empty front panel U-spaces in the

For additional information, refer to the Setup and Installation Guide or the Documentation

www.hp.com/servers/dl165

The 4 post Telco racks also supported.

www.hp.com/go/rackandpower

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 8

QuickSpecs

Standard Features

HP ProLiant DL165 Generation 7

Factory Express Portfolio for Servers and Storage

HP Enterprise Configurator

Service and Support

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to:

The HP eConfigure Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance.

http://www.hp.com/products/configurator

HP Care Pack Services provide total care and support expertise with committed response designed to meet your IT and business needs.

http://www.hp.com/go/factory-express

HP Care Pack services include coverage for the HP branded hardware options qualified for the server that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.

Recommended Service

management.

Support Service Deployment Service

Enhanced Service

Support Service Support Service Support Plus

- Simplify ProLiant solution implementation, maintenance and

- 3-Year 24x7 4 hr Response service support coverage

- Hardware Installation

- Optimize service level to increase IT performance and availability

- 3Year 24x7 24 hr Call to repair service support coverage

- 3-Year 24x7 6 hr Call to repair service support coverage

- 24x7 24 hr Call to repair service support including OS coverage Operating

Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays.

For a complete listing of service offerings and information visit:

http://www.hp.com/services/proliantservices http://h20219.www2.hp.com/services/us/en/warranty/carepack-servers-proliant.html

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 9

QuickSpecs

HP ProLiant DL165 Generation 7

HPC Interconnects

NOTE:

High Performance Computing (HPC) interconnect technologies are available for the DL165 G7 under the Cluster Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure to order clusters. Solutions can be defined with a lot of flexibility with the help of configuration tools. Please visit the following URL to configure HPC Clusters with InfiniBand, Gigabit Ethernet or Myrinet Interconnects:

http://www.hp.com/techservers/clusters/ucp/index.html

HPC Interconnects

InfiniBand

Gigabit Ethernet

10-Gigabit Ethernet

PCI-Express Generation 2 adapters

Use embedded ports or optional 10GbE NICs

PCI-Express Generation 2

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 10

QuickSpecs

HP ProLiant DL165 Generation 7

Models

Cold Plug/Hot Plug Serial ATA (SATA)/Serial Attached SCSI (SAS) Models

HP DL165G7 6172 Hot Plug SAS/SATA

590261-xx1

Processor(s)

Cache Memory

Memory

Network Controller

Storage Controller

Hard Drive

Internal Storage

Optical Drive

Form Factor

AMD Opteron™ Processor Model 6172 (2.1 GHz, 12MB Level 3 Cache, 80W)

12 MB shared L3 cache

16GB (8 x 2GB) PC3-10600R (RDIMM)

2x HP NC362i Integrated Dual Port Gigabit Server Adapter

HP Smart Array P410/ 256MB BBWC

None ship standard

Up to 8 Small form factor Hot Plug drives

4.0TB (8 x 500GB Hot Plug 2.5" SAS Hard Drives), Maximum

None ship standard

HP DL165G7 6136 Hot Plug SAS/SATA

590260-xx1

HP DL165G7 6128 Hot Plug SAS/SATA

590259-xx1

Processor(s)

Cache Memory

Memory

Network Controller

Storage Controller

Hard Drive

Internal Storage

Optical Drive

Form Factor

Processor(s)

Cache Memory

Memory

Network Controller

Storage Controller

Hard Drive

Internal Storage

Optical Drive

Form Factor

AMD Opteron™ Processor Model 6136 (2.4 GHz, 12MB Level 3 Cache, 80W)

12 MB shared L3 cache

8GB (4 x 2GB) PC3-10600R (RDIMM)

2x HP NC362i Integrated Dual Port Gigabit Server Adapter

HP Smart Array P410

None ship standard

8.0TB (4 x 2TB Hot Plug 3.5" SATA Hard Drives), Maximum

8.0TB (4 x 2TB Hot Plug 3.5" SAS Hard Drives), Maximum

None ship standard

AMD Opteron™ Processor Model 6128 (2.0 GHz, 12MB Level 3 Cache, 80W)

12 MB shared L3 cache

4GB (2 x 2GB) PC3-10600R (RDIMM)

2x HP NC362i Integrated Dual Port Gigabit Server Adapter

HP Smart Array B110i

None ship standard

8.0TB (4 x 2TB Hot Plug 3.5" SATA Hard Drives), Maximum

8.0TB (4 x 2TB Hot Plug 3.5" SAS Hard Drives), Maximum

None ship standard

HP DL165G7 6128HE Pluggable SATA

590258-xx1

Processor(s)

Cache Memory

Memory

Network Controller

Storage Controller

Hard Drive

Internal Storage

Optical Drive

Form Factor

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

AMD Opteron™ Processor Model 6128HE (2.0 GHz, 12MB Level 3 Cache, 65W)

12 MB shared L3 cache

4GB (2 x 2GB) PC3-10600R (RDIMM)

2x HP NC362i Integrated Dual Port Gigabit Server Adapter

HP Smart Array B110i

None ship standard

8.0TB (4 x 2TB Hot Plug 3.5" SATA Hard Drives), Maximum

8.0TB (4 x 2TB Hot Plug 3.5" SAS Hard Drives), Maximum

None ship standard

Page 11

QuickSpecs

Models

HP ProLiant DL165 Generation 7

Country Code Key

xx=00

xx=29

xx=37

xx=42

xx=AA

U.S.

Japan

APD

Euro

PRC

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 12

QuickSpecs

HP ProLiant DL165 Generation 7

Configuration Information - Factory Integrated Models

NOTE:

This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements.

NOTE:

HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start with a CTO Chassis.

NOTE:

FIO indicates that this option is only available as a Factory Installable Option.

Step 1: Base Configuration

Non-Hot Plug SATA Model (choose one of the following configurable models)

HP DL165G7 NHP CTO Chassis

Factory Integrated Model ships with:

Two HP NC362i Integrated Dual Port Gigabit Server Adapters

Slot 1: FL /FH PCI-Express x16 Gen 2 slot or Slot 1 : HL/FH x16 PCI-Express Gen2 slot and Slot 2 : HL/LP x8 PCI-Express Gen2 slot (internal only)

HP Smart Array B110i SATA RAID Controller

One Highline IEC Power Cord

4 Fixed, Non-Redundant Fans (standard); 6 Fixed, N+1 Redundant Fans (standard with addition of second processor)

Rack (1U), (1.75 in / 4.45 cm) Tool-less Fixed Rails

Hot Plug/Cold Plug Models

HP DL165G7 LFF CTO Chassis

HP DL165G7 SFF CTO Chassis

Factory Integrated Model ships with:

Two HP NC362i Integrated Dual Port Gigabit Server Adapters

Slot 1: FL /FH PCI-Express x16 Gen 2 slot or Slot 1 : HL/FH x16 PCI-Express Gen2 slot and Slot 2 : HL/LP x8 PCI-Express Gen2 slot (internal only)

One Highline IEC Power Cord

4 Fixed, Non-Redundant Fans (standard); 6 Fixed, N+1 Redundant Fans (standard with addition of second processor)

Rack (1U), (1.75 in / 4.45 cm) Tool-less Fixed Rails

591660-B21

592226-B21

592227-B21

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 13

QuickSpecs

HP ProLiant DL165 Generation 7

Configuration Information - Factory Integrated Models

Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)

HP Processors

NOTE:

If 2 processors are desired, select one xxxxxx-L21 and one xxxxxx-B21.

AMD Opteron™ Processor Model 6128 (2.0 GHz, 12MB Level 3 Cache, 80W) FIO Kit

AMD Opteron™ Processor Model 6128HE (2.0 GHz, 12MB Level 3 Cache, 65W) FIO Kit

AMD Opteron™ Processor Model 6134 (2.3 GHz, 12MB Level 3 Cache, 80W) FIO Kit

AMD Opteron™ Processor Model 6136 (2.4 GHz, 12MB Level 3 Cache, 80W) FIO Kit

AMD Opteron™ Processor Model 6164HE (1.7 GHz, 12MB Level 3 Cache, 65W) FIO Kit

AMD Opteron™ Processor Model 6172 (2.1 GHz, 12MB Level 3 Cache, 80W) FIO Kit

AMD Opteron™ Processor Model 6174 (2.2 GHz, 12MB Level 3 Cache, 80W) FIO Kit

601111-L21

601110-L21

601115-L21

601112-L21

601116-L21

601113-L21

601118-L21

HP Memory

Registered DIMMs (RDIMMs)

HP 2GB 2Rx4 PC3-10600R-9 Kit

HP 4GB 1Rx4 PC3-10600R-9 Kit

HP 4GB 1Rx4 PC3L-10600R-9 Kit

HP 8GB 2Rx8 PC3-10600R-9 Kit

HP 8GB 2Rx4 PC3L-10600R-9 Kit

HP 16GB 4Rx4 PC3-8500R-7 Kit

Unbuffered with ECC DIMMs (UDIMMs)

HP 2GB 2Rx8 PC3-10600E-9 Kit

HP 4GB 2Rx8 PC3-10600E-9 Kit

NOTE:

All DDR3 memory option kits consist of one DIMM per kit. For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:

NOTE:

Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy Efficient Features, see:

energy-efficient

NOTE:

There is a maximum support limitation of 8 ranks per memory channel (maximum of 2 quad rank DIMMs per channel)

NOTE:

PC3L is a low voltage memory.

www.hp.com/go/ddr3memory-configurator

http://www.hp.com/go/proliant-

593907-B21

593911-B21

604500-B21

593913-B21

604502-B21

593915-B21

593921-B21

593923-B21

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 14

QuickSpecs

Configuration Information - Factory Integrated Models

HP ProLiant DL165 Generation 7

HP Hard Drives

NOTE:

The components of a storage subsystem (e.g. the drive, the HBA/controller, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.

NOTE:

Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.

NOTE:

A minimum of one SATA Non-Hot Plug hard drive is required ONLY when purchasing Non-Hot Plug CTO Chassis Model (P/N 591660-B21) in Step

Serial-ATA (SATA) Non-Hot Plug Hard Drives

SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives

HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1y Wty Hard Drive

HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1y Wty Hard Drive

SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives

HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard Drive

HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard Drive

HP 750GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard Drive

HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard Drive

HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard Drive

(Non-Hot Plug Models Only)

571232-B21

458947-B21

507774-B21

507772-B21

462595-B21

458941-B21

458939-B21

HP Storage Controllers

NOTE:

With the HP Smart Array P410 Controller, the addition of the battery backed cache upgrade enables BBWC, RAID 5, 5+0, array expansion, logical drive extension, RAID migration, and stripe size migration. In order to upgrade to RAID 6, at least 256MB Cache and a Battery is required in addition to the Smart Array Advanced Pack license (P/N 516471-B21).

NOTE:

To use the internal only PCI-e slot when purchasing the Hot Plug CTO Chassis, a HP Smart Array P410 controller must be selected. When selecting the HP Smart Array P212 Controller (P/N 491191-B21), the controller will be installed in the x16 slot since it has both an internal and external port. This prevents the use of the internal slot and no PCI-E slots will be available.

NOTE:

A minimum of one primary HP Storage Controller is required ONLY when purchasing SFF CTO Chassis Model (P/N 592227-B21) in Step 1.

HP Smart Array P812/1G Flash Backed Cache Controller

HP P410 w/1G Flash Backed Cache Controller

HP P410 w/512MB Flash Backed Cache Controller

HP P410/Zero Memory FIO Smart Array Controller

HP P410/256MB Smart Array Controller

HP Smart Array P410/256MB w/ Battery FIO

HP P410/512MB BBWC Smart Array Controller

487204-B21

572532-B21

578230-B21

462860-B21

462862-B21

491195-B21

462864-B21

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 15

QuickSpecs

Configuration Information - Factory Integrated Models

HP ProLiant DL165 Generation 7

HP Power Supplies

CAUTION:

Common Slot Power Supplies. These power supplies come in multiple power ratings and higher efficiency levels to offer the Right Size solution to fit your configuration. This provides improved power delivery and the advantage of reclaiming lost power. Prior to making a power supply selection it is "highly recommended" that the "HP Power Advisor" is run to determine the right size power supply for your server configuration. The HP Power Advisor is located at:

www.hp.com/go/hppoweradvisor

power slot (bay), only same size power supplies are recommended. If nonmatched power supplies are inserted you will get errors and operation will fail.

HP High Efficiency 500W Non hot plug FIO Power Supply Kit

HP High Efficiency 750W 92%Power Supply Kit

Many HP ProLiant Servers now offer new power options, including

. In ProLiant Servers that have more than one

Step 3: Choose Additional Factory Integratable Options

HP Storage Controllers

NOTE:

HP P212/256MB FIO Smart Array BBWC

NOTE:

P212 may be used as external controller only in SFF models.

HP P410/Zero Memory FIO Smart Array Controller

HP Smart Array P410/256MB w/ Battery FIO

593915-B21

535683-B21

491191-B21

462860-B21

491195-B21

Step 4: Choose Additional Options for Factory Integration

NOTE:

For additional "Core Options" and "Additional Options", please refer to the "Options" sections below.

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 16

QuickSpecs

Core Options

NOTE:

Some options may not be available for factory integration. Please contact an HP sales representative for additional

information.

HP Processors

AMD Opteron™ Processor Model 6128 (2.0 GHz, 12MB Level 3 Cache, 80W) Kit

AMD Opteron™ Processor Model 6128HE (2.0 GHz, 12MB Level 3 Cache, 65W) Kit

AMD Opteron™ Processor Model 6134 (2.3 GHz, 12MB Level 3 Cache, 80W) Kit

AMD Opteron™ Processor Model 6136 (2.4 GHz, 12MB Level 3 Cache, 80W) Kit

AMD Opteron™ Processor Model 6164HE (1.7 GHz, 12MB Level 3 Cache, 65W) Kit

AMD Opteron™ Processor Model 6172 (2.1 GHz, 12MB Level 3 Cache, 80W) Kit

AMD Opteron™ Processor Model 6174 (2.2 GHz, 12MB Level 3 Cache, 80W) Kit

HP ProLiant DL165 Generation 7

601111-B21

601110-B21

601115-B21

601112-B21

601116-B21

601113-B21

601118-B21

HP Memory

HP Optical Drives

HP Hard Drives

Registered DIMMs (RDIMMs)

HP 2GB 2Rx4 PC3-10600R-9 Kit

HP 4GB 1Rx4 PC3-10600R-9 Kit

HP 4GB 1Rx4 PC3L-10600R-9 Kit

HP 8GB 2Rx8 PC3-10600R-9 Kit

HP 8GB 2Rx4 PC3L-10600R-9 Kit

HP 16GB 4Rx4 PC3-8500R-7 Kit

Unbuffered with ECC DIMMs (UDIMMs)

HP 2GB 2Rx8 PC3-10600E-9 Kit

HP 4GB 2Rx8 PC3-10600E-9 Kit

NOTE:

PC3L is a low voltage memory.

DVD-ROM Drive Optical Drive

DVD RW Drive Optical Drive

NOTE:

Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.

SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives

HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive

HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive

HP 750GB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive

HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive

SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives

HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard Drive

HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard Drive

593907-B21

593911-B21

604500-B21

593913-B21

604502-B21

593915-B21

593921-B21

593923-B21

481045-B21

481047-B21

507632-B21

454146-B21

458930-B21

458928-B21

507774-B21

507772-B21

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 17

QuickSpecs

Core Options

HP ProLiant DL165 Generation 7

HP 750GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard Drive

HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard Drive

HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1y Wty Hard Drive

SATA Hot Plug LFF (3.5-inch) Entry (ETY) Drives

HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Entry 1yr Warranty Hard Drive

HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Entry 1yr Warranty Hard Drive

SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives

HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1y Wty Hard Drive

HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1y Wty Hard Drive

NOTE:

Please see the QuickSpecs for Technical Specifications and additional information:

http://h18000.www1.hp.com/products/quickspecs/13021_div/13021_div.html

(Worldwide)

SATA Hot Plug 3.5" Midline (MDL) Solid State Drives

HP 120GB 3G SATA 3.5in MDL 1y Wty SSD

HP 60GB 3G SATA 3.5in MDL 1y Wty SSD

NOTE:

Please see the QuickSpecs for Technical Specifications and additional information:

http://h18000.www1.hp.com/products/quickspecs/13415_div/13415_div.html

(Worldwide)

SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives

HP 600GB 6G SAS 15K LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive

HP 450GB 6G SAS 15K LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive

HP 450GB 3G SAS 15K LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive

HP 300GB 6G SAS 15K LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive

HP 300GB 3G SAS 15K LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive

HP 146GB 3G SAS 15K LFF (3.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive

SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives

HP 2TB 6G SAS 7.2K rpm LFF (3.5-inch) Dual Port Midline 1yr Wty Hard Drive

HP 1TB 6G SAS 7.2K rpm LFF (3.5-inch) Dual Port Midline 1yr Wty Hard Drive

HP 1TB 3G SAS 7.2K rpm LFF (3.5-inch) Dual Port Midline 1yr Wty Hard Drive

HP 750GB 3G SAS 7.2K rpm LFF (3.5-inch) Dual Port Midline 1yr Wty Hard Drive

NOTE:

The purchase of SAS HBA or array controller is required.

NOTE:

Please see the QuickSpecs for Technical Specifications and additional information:

http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html

(Worldwide)

462595-B21

458941-B21

458939-B21

571230-B21

458945-B21

571232-B21

458947-B21

570763-B21

570761-B21

516828-B21

516816-B21

454232-B21

516814-B21

416127-B21

384854-B21

507616-B21

507614-B21

461137-B21

461135-B21

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 18

QuickSpecs

Core Options

HP ProLiant DL165 Generation 7

HP Networking

Gigabit Ethernet Adapters

HP NC112T PCIe Gigabit Server Adapter

HP NC360T PCI Express Dual Port Gigabit Server Adapter

HP NC375T PCI Express Quad Port Gigabit Server Adapter

HP NC364T PCI Express Quad Port Gigabit Server Adapter

HP NC373F PCI Express Multifunction Gigabit Server Adapter

HP NC373T PCI Express Multifunction Gigabit Server Adapter

HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter

10 Gigabit Ethernet Adapters

HP NC522SFP Dual Port 10GbE Server Adapter

NOTE:

A minimum of two Gigabytes (2 GB) of server memory is required per each NC522SFP adapter.

NOTE:

Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.

HP NC550SFP Dual Port 10GbE Server Adapter

NOTE:

A minimum of two Gigabytes (2 GB) of server memory is required per each NC550SFP adapter.

NOTE:

Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be purchased separately.

NOTE:

Please see the QuickSpecs for Technical Specifications and additional information:

www.hp.com/go/ProLiantNICs

503746-B21

412648-B21

538696-B21

435508-B21

394793-B21

394791-B21

458492-B21

468332-B21

581201-B21

HP Cooling Options

HP DL165G7 Redundant Fan OPT KIT

NOTE:

Redundant Fan Option Kit ONLY required for fan redundancy in single processor configurations. Two processor configurations offer N+1 fan redundancy as standard.

593114-B21

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 19

QuickSpecs

Additional Options

HP ProLiant DL165 Generation 7

HP Entry-Level Server Management

HP Insight Software

HP LO100i Advanced Pack, No Media 1-Server License including 1 year of 24x7 Technical Support and Updates

NOTE:

For additional License Kits please see the Lights-Out 100i QuickSpecs at:

www.hp.com/go/lo100

HP Insight Control for Linux

HP Insight Control for Linux, 1-server license, including one year of 24x7 Technical Support and Updates, Electronic

HP Insight Control for Linux, No Media, 1-Server license, including one year of 24x7 Technical Support and Updates

HP Insight Control for Linux, Media pack (DVD) - No licenses included

NOTE:

Licenses ship without media. The Media Kit for Insight Control for Linux can be ordered separately, or can be downloaded at:

linux

(click on Download button).

NOTE:

Electronic licenses can be used to purchase multiple licenses with a single activation key, and are available in all countries except China and Japan. Customers in China and Japan should order the physical equivalent.

NOTE:

Customer will receive a license entitlement certificate, which must be redeemed online or via fax in order to obtain the license activation key(s). Includes one year of 24 x 7 HP Software Technical Support Service.

NOTE:

For additional License Kits, including electronic licensing options, please see the QuickSpecs at:

http://h18000.www1.hp.com/products/quickspecs/13019_div/13019_div.html

HP Insight Control server deployment

HP Insight Control server deployment Electronic License including 1 year 24x7 Technical Support and Updates

HP Insight Control server deployment 1-Server License including 1 year 24x7 Technical Support and Updates

NOTE:

Licenses ship without media. The Insight Control Media Kit can be ordered separately, or can be downloaded at:

http://www.hp.com/go/insightupdates

NOTE:

Electronic licenses can be used to purchase multiple licenses with a single activation key, and is available in all countries except China and Japan. Customers in China and Japan should order the physical equivalent.

NOTE:

For additional license kits please see the Insight Control QuickSpecs at:

http://h18004.www1.hp.com/products/quickspecs/12631_div/12631_div.html

http://www.hp.com/go/ic-

530521-B21

TC213AAE

TC209A

TC208A

T9082AAE

452151-B21

HP Graphic Options

HP Security - TPM

HP Storage Controllers

HP Graphic Card Power Adapter Kit

HP Trusted Platform Module Option Kit

SAS Controllers

NOTE:

To utilize the internal only slot, the HP Smart Array P410 Controller must be selected. The selection of the HP Smart Array P212 Controller for internal and external connectivity, will require the use of the Full Length Full Height PCIE x16 slot.

NOTE:

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

533955-B21

488069-B21

Page 20

QuickSpecs

Additional Options

Smart Array Advanced Pack license (P/N 516471-B21).

Smart Array P212 Controller

HP Smart Array P212/Zero Memory Controller

HP Smart Array P212/256MB Controller

Smart Array P410 Controller

HP Smart Array P410/256MB Controller

HP Smart Array P410/512MB with BBWC Controller

HP Smart Array P410/512MB with FBWC

HP Smart Array P410/1G with FBWC

Smart Array P411 Controller

NOTE:

Controllers for use with external storage only.

HP Smart Array P411/256MB Controller

HP Smart Array P411/512MB BBWC

HP Smart Array P411/512MB Flash Backed Write Cache

HP Smart Array P411/1G Flash Backed Write Cache

NOTE:

Please see the following QuickSpecs for Technical Specifications and additional information:

http://h18000.www1.hp.com/products/quickspecs/12616_div/12616_div.html

(Smart Array P800 Controller)

http://h18000.www1.hp.com/products/quickspecs/13203_div/13203_div.html

(Smart Array P212 Controller)

http://h18000.www1.hp.com/products/quickspecs/13201_div/13201_div.html

(Smart Array P410 Controller)

http://h18000.www1.hp.com/products/quickspecs/13202_div/13202_div.html

(Smart Array P411 Controller)

Optional upgrades

1G Flash Backed Write Cache

512MB Flash Backed Write Cache

HP Smart Array Advanced Pack No Media 1-Server license including 1yr 24x7 Technical Support

NOTE:

This part number can be used to purchase a single license or to order multiple licenses with a single activation key. Customers will receive a license entitlement certificate via e-mail. The license entitlement certificate must be redeemed online or via fax in order to obtain the license activation key(s). Include one year of 24x7 HP Software Technical Support Services.

HP Smart Array Hot Plug Advanced Pack for B110i No Media 1-Server license including 1yr 24x7 Technical Support

SAS HBA

HP SC08Ge Host Bus Adapter

NOTE:

Please see the following QuickSpecs for Technical Specifications and additional information:

http://h18000.www1.hp.com/products/quickspecs/13203_div/13203_div.html

(Smart Array P212 Controller)

http://h18000.www1.hp.com/products/quickspecs/13201_div/13201_div.html

(Smart Array P410 Controller)

http://h18000.www1.hp.com/products/quickspecs/13202_div/13202_div.html

(Smart Array P411 Controller)

http://h18000.www1.hp.com/products/quickspecs/13558_div/13558_div.html

(Smart Array P812 Controller)

http://h18000.www1.hp.com/products/quickspecs/13495_div/13495_div.html

(Smart Array Advanced Pack)

http://h18004.www1.hp.com/products/quickspecs/13082_div/13082_div.html

(SC08Ge HBA)

HP ProLiant DL165 Generation 7

462828-B21

462834-B21

462862-B21

462864-B21

578230-B21

572532-B21

462830-B21

462832-B21

578229-B21

572531-B21

534562-B21

534916-B21

516471-B21

TC421A

488765-B21

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 21

QuickSpecs

Additional Options

HP ProLiant DL165 Generation 7

HP InfiniBand Options

HP Backup & Recovery Software

HP Tape Backup

HP IB 4X DDR PCI-e DUAL PORT HCA

HP IB 4X QDR Conn-X PCI-e G2 Dual Port HCA

NOTE:

Please see the QuickSpecs for additional information:

http://h18000.www1.hp.com/products/quickspecs/13078_div/13078_div.html

Data Protector Express

HP Data Protector Express 4.0 SP1 Backup Server

HP Data Protector Express 4.0 SP1 for Microsoft Small Business Server

HP Data Protector Express Backup Server 4.0 SP1 Upgrade from Data Protector Express Single Server Edition

NOTE:

Only one of these Data Protector Express base products is required. To see available options:

NOTE:

For the complete range of StorageWorks tape drives, autoloaders, libraries and media see: compatibility of HP StorageWorks tape backup products see:

http://www.hp.com/go/connect

HP StorageWorks DAT 160 SAS Internal Tape Drive

NOTE:

For installation into 1U SAS Rack-Mount Kit (AE459B) or 3U SAS RackMount Kit (AG576B). No peripheral bay available for installation into the server. Connection using the HP SC44Ge SAS Host Bus Adapter (416096-B21) recommended.

HP StorageWorks 1U USB Rack-Mount Kit with one DAT 320 USB Tape Drive

HP StorageWorks DAT 320 SAS Internal Tape Drive

NOTE:

HP StorageWorks LTO-2 Ultrium 448 SAS Internal Tape Drive

NOTE:

HP StorageWorks LTO-3 Ultrium 920 SAS Internal Tape Drive

NOTE:

HP StorageWorks 1/8 G2 LTO-3 Ultrium 920 SAS Tape Autoloader

NOTE:

Requires HP 1U Tape Autoloader Rack-Mount Kit (AH166A) for rack installation. Connection using the HP SC44Ge SAS Host Bus Adapter (416096B21) recommended.

HP StorageWorks MSL2024 Tape Library with one LTO-3 Ultrium 920 SAS Drive

NOTE:

Connection using the HP SC44Ge SAS Host Bus Adapter (416096-B21) recommended.

http://www.hp.com/go/dataprotectorexpress

http://www.hp.com/go/tape

. For hardware and software

448397-B21

516937-B21

BB117BA

BB118BA

BB117BT

Q1587A

AP835A

AJ830A

DW085A

EH847A

AH558A

AH559A

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 22

QuickSpecs

Additional Options

HP ProLiant DL165 Generation 7

HP Disk Backup

NOTE:

For the complete range of StorageWorks D2D Backup Systems see:

http://www.hp.com/go/d2d

and media see: compatibility of HP StorageWorks disk backup products see:

http://www.hp.com/go/connect

HP StorageWorks D2D Backup Systems with Backup Data Deduplication

HP StorageWorks D2D2502i Backup System

NOTE:

1.5TB of usable network disk backup capacity. Network connected appliance with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.

HP StorageWorks D2D2504i Backup System

NOTE:

3.0TB of usable network disk backup capacity. Network connected appliance with connectivity using the iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.

USB Removable Media RDX Disk Backup Systems

HP StorageWorks RDX320 Internal Removable Disk Backup System

NOTE:

For installation into 1U USB Rack-Mount Kit (A8007A). No peripheral bay available for drive installation into the server. 320GB of disk capacity per data cartridge.

HP StorageWorks RDX500 Internal Removable Disk Backup System

NOTE:

For installation into 1U USB Rack-Mount Kit (A8007A). No peripheral bay available for drive installation into the server. 500GB of disk capacity per data cartridge.

HP StorageWorks RDX750 Internal Removable Disk Backup System

NOTE:

For installation into 1U USB Rack-Mount Kit (A8007A). No peripheral bay available for drive installation into the server. 750GB of disk capacity per data cartridge.

http://www.hp.com/go/rdx

. For the complete range of StorageWorks RDX drives

. For hardware and software

EJ001A

EJ002A

AJ767A

AJ934A

AW577A

HP StorageWorks Options

StorageWorks Fibre Channel HBA

NOTE:

The following is a list of all Fibre Channel Host Bus Adapters for Windows and Linux. For detailed compatibility information please see:

http://h18006.www1.hp.com/storage/saninfrastructure/hba.html

Brocade Fibre Channel HBAs

HP 81B PCIe 8Gb FC Single Port HBA

HP 82B PCIe 8Gb FC Dual Port HBA

HP 41B PCIe 4Gb FC Single Port HBA

HP 42B PCIe 4Gb FC Dual Port HBA

Emulex Fibre Channel HBAs

HP StorageWorks 81E 8Gb SP PCI-e FC HBA

HP StorageWorks 82E 8Gb Dual-port PCI-e FC HBA

HP StorageWorks FC2142SR 4Gb PCI-e HBA

HP StorageWorks FC2242SR Dual Channel 4Gb PCI-e HBA

QLogic Fibre Channel HBAs

HP StorageWorks 81Q 8Gb PCI-e FC HBA

HP StorageWorks 82Q 8Gb Dual Port PCI-e FC HBA

HP StorageWorks FC1142SR 4Gb PCI-e HBA

HP StorageWorks FC1242SR Dual Channel 4Gb PCI-e HBA

StorageWorks SCSI HBA

HP U320e SCSI Host Bus Adapter

NOTE:

Recommended for MSL SCSI Tape Library connect.

AP769A

AP770A

AP767A

AP768A

AJ762A

AJ763A

A8002A

A8003A

AK344A

AJ764A

AE311A

AE312A

AH627A

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 23

QuickSpecs

Additional Options

NOTE:

Recommended Dual Channel Ultra320 SCSI Controller for connecting multi-drive MSL tape libraries to ProLiant servers.

StorageWorks Converged Network Adapter

HP CN1000E 2P Converged Network Adapter

HP ProLiant DL165 Generation 7

AW520A

HP Uninterruptible Power Systems

HP Rack-mountable UPS

HP R1500 G2 UPS

HP, R1.5kVA UPS, 1U, NA

HP, R1.5kVA UPS, 1U, INTL

HP, R1.5kVA UPS, 1U, JPN/TW

NOTE:

Please see the QuickSpecs for Technical Specifications and additional information:

http://h18000.www1.hp.com/products/quickspecs/12507_div/12507_div.html

(Worldwide)

HP T1000 G3 UPS

HP T1000 G3 UPS, NA/JPN

HP T1000 G3 UPS, INTL

NOTE:

Please see the QuickSpecs for additional information: http://h18000.www1.hp.com/products/quickspecs/13160_div/13160_div.html (Worldwide)

HP T1500 G3 UPS

HP T1500 G3 UPS, NA/JPN

HP T1500 G3 UPS, INTL

NOTE:

Please see the QuickSpecs for additional information:

http://h18000.www1.hp.com/products/quickspecs/13160_div/13160_div.html

(Worldwide)

NOTE:

For additional information on all HP Uninterruptible Power Systems and accessories please go to:

NOTE:

For additional information on sizing your server, please reference:

http://www.upssizer.com

www.hp.com/products/ups

(Worldwide)

AF419A

AF418A

AF421A

AF448A

AF449A

AF450A

AF451A

HP Rack Series

HP Rack 10000 G2 Series

HP Universal Rack 10642 G2 Pallet ALL

HP Universal Rack 10642 G2 Shock ALL

NOTE:

It is mandatory to use a shock pallet when shipping racks with equipment installed.

NOTE:

xxxxxx-B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and Channels).

NOTE:

Please see the QuickSpecs for Technical Specifications and additional information:

http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.html

(Worldwide)

NOTE:

For additional information regarding Rack Cabinets, please see the following URL:

http://www.hp.com/go/rackandpower

(Carbon/Graphite Metallic)

AF001A

AF002A

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 24

QuickSpecs

Additional Options

HP ProLiant DL165 Generation 7

HP Rack Options

HP USB and SD Options

Keyboards and Monitors

HP KVM Switch Options

Server console switch 0x2x8

Server console switch 0x2x16

HP 1x4 Console Switch

0x2x16 KVM Server Console G2 Switch with Virtual Media and CAC

0x2x32 KVM Server Console G2 Switch with Virtual Media and CAC

1x1Ex8 KVM IP Console Switch G2 with Virtual Media and CAC

2x1Ex16 KVM IP Console Switch G2 with Virtual Media and CAC

4x1Ex32 KVM IP Console Switch G2 with Virtual Media and CAC

NOTE:

For additional information regarding KVM switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL:

HP USB-P/S2 Mouse

HP USB 04 Standard Keyboard

HP DL165G7 SD Card Reader Module OPT KIT

http://www.hp.com/go/kvm

AF616A

AF617A

AF618A

AF619A

AF620A

AF621A

AF622A

DC369A

DT528A#ABA

592710-B21

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 25

QuickSpecs

HP ProLiant DL165 Generation 7

Memory

HP ProLiant DL165 G7 (all models)

NOTE:

Memory configurations listed do not apply to "Factory Integrated Models".

Standard Memory

4 GB (2 x 2 GB) PC2-6400 DIMM memory, with Advanced ECC Capabilities memory installed.

Maximum Memory

Up to 246GB memory is available with the optional installation of PC2-8500R-7 Registered DIMM memory kits. Memory should be installed in pairs and matched for optimum performance.

DDR3 memory population guidelines

For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:

www.hp.com/go/ddr3memory-configurator

Some DIMM installation guidelines are summarized below:

For servers with twenty-four (24) memory slots:

There are four (4) channels per processor; eight (8) channels per server There are three (3) DIMM slots for each memory channel; twenty-four (24) total slots Memory channel 1 consists of the three (3) DIMMs that are furthest from the processor

Memory channel 4 consists of the three (3) DIMMs that are closest to the processor Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs) Do not install DIMMs if the corresponding processor is not installed If only one processor is installed in a 2CPU system, only half of the DIMM slots are available To maximize performance, balance the total memory capacity between all installed processors It is not required, but it is recommended to load the channels similarly if possible You can only have up to eight (8) ranks installed per channel Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if the slower DIMM is on the other processor If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, you still run at 1066MHz If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the other channels, you run at 1066MHz If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800MHz 95 Watt CPU's are required for 1333MHz DIMM speeds. All other CPU's are capable of up to 1066MHz References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc You can only install one quad-rank DIMMs per channel and it must be in the center socket You can only install two UDIMMs per channel; if available, the second (or middle) slot in the channel must remain empty Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel Heaviest load (DIMM with most ranks) within a channel goes furthest from the chipset

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 26

QuickSpecs

HP ProLiant DL165 Generation 7

Memory

Unbuffered with ECC

DIMM Type

DIMM Rank DIMM Capacity DIMM Native Speed (MHz) Voltage

24 slot servers

1 DIMM Per Channel 2 DIMM Per Channel 3 DIMM Per Channel

* This capacity is achieved by loading 1 16GB in center socket and remaining sockets with 8GB DIMMs.

DIMM slot and configuration diagrams Basic memory slot & population diagram

Single Rank

4GB 2GB 8GB

1333 1333 1333 1066 1333 1333

LV/Reg

SLOTS THAT CAN BE POPULATED

MAXIMUM CAPACITY (GB)

POPULATED DIMM SPEED (MHz)

1333 1333 1333 1066 1333 1333 1333 1333 1333 1333 1066 1066

Registered DIMMS (RDIMMs)

Quad Rank

Dual Rank (2R)

Reg

24 24 24 8 16 16

96 48 192 256

LV/Reg

(4R)

16GB

Reg Reg Reg

n/a n/a n/a n/a

DIMMs (UDIMMs)

2GB 4GB

32 64

1333 1333

Dual Rank (2R)

Population order; start with "A" first, "B" second, "C" third, etc.

24 DIMM SLOTS (12 per CPU node)

Chnl 1

Chnl 2

Chnl 3

Chnl 4

NOTE:

Capacity references are rounded to the common Gigabyte values.

slot #

1 2 3

4 5 6

7 8 9

10 11 L 11 L 12

CPU1 CPU2

population order

C K G

J F

slot #

1 2 3

4 5 6

7 8 9

population order

C K G

J F

Chnl 1

Chnl 2

Chnl 3

Chnl 4

2GB = 2048MB 4GB = 4096MB 8GB = 8192MB 16GB = 16384MB

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 27

QuickSpecs

Memory

Following are memory options available from HP:

HP Memory

Registered DIMMs (RDIMMs)

HP 2GB 2Rx4 PC3-10600R-9 Kit

HP 4GB 1Rx4 PC3-10600R-9 Kit

HP 4GB 1Rx4 PC3L-10600R-9 Kit

HP 8GB 2Rx8 PC3-10600R-9 Kit

HP 8GB 2Rx4 PC3L-10600R-9 Kit

HP 16GB 4Rx4 PC3-8500R-7 Kit

Unbuffered with ECC DIMMs (UDIMMs)

HP 2GB 2Rx8 PC3-10600E-9 Kit

HP 4GB 2Rx8 PC3-10600E-9 Kit

NOTE:

PC3L is a low voltage memory.

HP ProLiant DL165 Generation 7

593907-B21

593911-B21

604500-B21

593913-B21

604502-B21

593915-B21

593921-B21

593923-B21

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 28

QuickSpecs

Storage

Drive Support

HP ProLiant DL165 Generation 7

1-4

Hot plug 3.5" SATA or Hot-plug SAS/SATA hard drive bays

Optional DVD-ROM, or DVD/CD RW

1-8

Eight Hot-plug SAS hard drive bays

Optional DVD-ROM, or DVD RW

Removable Media

DVD-ROM

DVD RW

Hard Drives

NOTE:

Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.

SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives

2TB 3G SATA 7.2K 1TB 3G SATA 7.2K 750GB 3G SATA 7.2K 500GB 3GSATA 7.2K 250GB 3G SATA 7.2K

SATA Hot Plug LFF (3.5-inch) Midline (MDL) Drives

2TB 3G SATA 7.2K 1TB 3G SATA 7.2K 750GB 3G SATA 7.2K 500GB 3G SATA 7.2K 250GB 3G SATA 7.2K 160GB 3G SATA 7.2K

Quantity

Supported

Up to 1

Quantity

Supported

Up to 4

Quantity

Supported

Up to 4

Position

Supported

Position

Supported

1-4

Position

Supported

1-4

Controller

Integrated IDE (ATAPI) (optional)

Controller

HP Smart Array P212 Controller HP Smart Array P410 Controller HP Smart Array P812 Controller

Controller

HP Smart Array P212 Controller HP Smart Array P410 Controller HP Smart Array P812 Controller

SATA Hot Plug LFF (3.5-inch) Entry (ETY) Drives

250GB 3G SATA 7.2K 160GB 3G SATA 7.2K

SATA Hot Plug Midline (MDL) Solid State Drives

Quantity

Supported

Up to 4

Quantity

Supported

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Position

Supported

1-4

Position

Supported

Controller

HP Smart Array P212 Controller HP Smart Array P410 Controller HP Smart Array P812 Controller

Controller

Page 29

QuickSpecs

Storage

HP ProLiant DL165 Generation 7

60GB 3.0G SATA SSD 120GB 3.0G SATA SSD

SATA Hot Plug 3.5" Midline (MDL) Solid State Drives

60GB 3.0G SATA SSD 120GB 3.0G SATA SSD

SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives

500 6G SAS 7.2K

SAS Hot Plug LFF (3.5-inch) Midline (MDL) Drives

2TB 6G SAS 7.2K 1TB 6G SAS 7.2K 1TB 3G SAS 7.2K 750 3G SAS 7.2K

Up to 8

Quantity

Supported

Up to 4

Quantity

Supported

Up to 8

Quantity

Supported

Up to 4

1-8

Position

Supported

1-4

Position

Supported

1-8

Position

Supported

1-4

HP Smart Array P212 Controller HP Smart Array P410 Controller HP Smart Array P812 Controller

Controller

HP Smart Array P212 Controller HP Smart Array P410 Controller HP Smart Array P812 Controller

Controller

HP Smart Array P212 Controller HP Smart Array P410 Controller HP Smart Array P812 Controller

Controller

HP Smart Array P212 Controller HP Smart Array P410 Controller HP Smart Array P812 Controller

SAS Hot Plug SFF(2.5-inch) Enterprise (ENT) Drives

300GB 6G SAS 10K 300GB 3G SAS 10K 146GB 6G SAS 15K 146GB 3G SAS 15K 146GB 6G SAS 10K 146GB 3G SAS 10K 72GB 6G SAS 15K 72GB 3G SAS 10K

SAS Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives

600GB 6G SAS 15K 450GB 6G SAS 15K 450GB 3G SAS 15K 300GB 6G SAS 15K 300GB 3G SAS 15K 146GB 3G SAS 15K

Quantity

Supported

Up to 8

Quantity

Supported

Up to 4

Position

Supported

1-8

Position

Supported

1-4

Controller

HP Smart Array P212 Controller HP Smart Array P410 Controller HP Smart Array P812 Controller

Controller

HP Smart Array P212 Controller HP Smart Array P410 Controller HP Smart Array P812 Controller

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 30

QuickSpecs

HP ProLiant DL165 Generation 7

Storage

Tape and Disk Backup

NOTE:

For the complete range of StorageWorks tape drives, autoloaders, libraries and media, including the internal fitting models, see:

http://www.hp.com/go/d2d

For hardware and software compatibility of HP StorageWorks disk and tape backup products see:

http://www.hp.com/go/connect

HP StorageWorks SCSI Tape Drives, External

LTO-1 Ultrium 232 LTO-2 Ultrium 448 LTO-3 Ultrium 920 LTO-3 Ultrium 960 LTO4 Ultrium 1760 LTO-4 Ultrium 1840 DAT 40 DAT 72 DAT 160 1U Rack-Mount Kit 3U Rack-Mount Kit

HP StorageWorks USB Tape Drives, External

DAT 40 DAT 72 DAT 160 DAT 320 1U USB Rack-Mount Kit

HP StorageWorks SAS Tape Drives, External

DAT 160 DAT 320 LTO-2 Ultrium 448 LTO-3 Ultrium 920 LTO-4 Ultrium 1760 LTO-4 Ultrium 1840 LTO-5 Ultrium 3000 LTO-5 Ultrium 3280 1U Rack-Mount Kit 3U Rack-Mount Kit

HP StorageWorks SCSI Tape Autoloaders, External

DAT 72x10 Autoloader 1/8 G2 Autoloader

HP StorageWorks SCSI Tape Libraries, External

MSL2024 MSL4048 MSL8096 MSL6000

HP StorageWorks SAS

http://www.hp.com/go/tape

. For the complete range of StorageWorks RDX drives and media see:

Position

External

. For the complete range of StorageWorks D2D Backup Systems see:

Recommended Controller

HP SC11Xe Host Bus Adapter

Please check the full compatibility information at:

http://www.hp.com/go/connect

USB 2.0 Port

HP Smart Array P212 SAS controller

Please check the full compatibility information at:

http://www.hp.com/go/connect

HP SC11Xe Host Bus Adapter

Please check the full compatibility information at:

http://www.hp.com/go/connect

HP U320e SCSI Dual Channel Controller

Please check the full compatibility information at:

http://www.hp.com/go/connect

HP Smart Array P212 SAS controller

http://www.hp.com/go/rd

Part Number

412911-B21

462828-B21

412911-B21

AH627A

462828-B21

N/A

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 31

QuickSpecs

HP ProLiant DL165 Generation 7

Storage

Tape Autoloaders and Libraries, External

1/8 G2 Autoloader MSL2024 MSL4048 MSL8096

HP StorageWorks Fibre Channel Tape Libraries, External

MSL2024 MSL4048 MSL8096 MSL6000

HP StorageWorks USB RDX Removable Disk Backup System, External

RDX160 RDX320 RDX500 RDX750

HP StorageWorks D2D Backup Systems, iSCSI

D2D2500i D2D4000i

HP StorageWorks D2D Backup Systems, Fibre Channel

D2D4000fc

External

Rack Mount

Please check the full compatibility information at:

http://www.hp.com/go/connect

Please consult the EBS connectivity matrix at:

http://www.hp.com/go/ebs

supported Fibre Channel HBAs shown in this QuickSpecs.

USB 2.0 port

Embedded Network Controller. If the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host Bus Adapter is recommended.

Direct server attach is not supported, requires connection via SAN fabric. See:

http://www.hp.com/go/connect

for connectivity information and the

N/A

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 32

QuickSpecs

Power Specifications

HP 500W Power Supply Part Number - AC 500W PSU

Input Voltage Range (Vrms) Frequency Range (Nominal) (Hz) Nominal Input Voltage (Vrms)

Maximum Rated Output Wattage Nominal Input Current (A rms) Max Rated Input Wattage Rating (Watts) Max. Rated VA (Volt-Amp) Efficiency (%) at Max. Rated Output Wattage Power Factor Leakage Current (mA) Max. Inrush Current (A peak) Max. Inrush Current duration (mS) Maximum British Thermal Unit Rating (BTU-

Hr)

HP 750W Power Supply Part Number - AC 750W PSU

Input Voltage Range (Vrms) Frequency Range (Nominal) (Hz) Nominal Input Voltage (Vrms)

Max Rated Output Wattage Rating Nominal Input Current (A rms) Max Rated Input Wattage Rating (Watts) Max. Rated VA (Volt-Amp) Efficiency (%) at Max. Rated Output Wattage Power Factor Leakage Current (mA) Max. Inrush Current (A peak) Max. Inrush Current duration (mS) Maximum British Thermal Unit Rating (BTU-

Hr)

HP ProLiant DL165 Generation 7

515915-B21 FIO 100 to 240 47/63

100 120 200 220 230 240

500 500 500 500 500 500

5.74 4.99 2.86 2.58 2.46 2.36 568 568 562 556 556 556 574 574 573 567 567 567

88 88 89 90 90 90

0.99 0.99 0.98 0.98 0.98 0.98

0.42 0.50 0.81 0.91 0.95 1.00

30 30 30 30 30 30 20 20 20 20 20 20

512327-B21 Option Kit 100 to 240 50/60

100 120 200 208 220 230 240

750 750 750 750 750 750 750

8.9 7.4 4.3 4.1 3.9 3.7 3.6 857 847 824 825 820 820 820 894 884 859 859 854 854 854

87.5 88.5

0.97 0.97 0.97 0.97 0.97 0.97 0.97

0.42 0.50 0.83 0.87 0.92 0.96 1.00 30 30 30 30 30 30 30 20 20 20 20 20 20 20

2925 2892 2812 2812 2797 2797 2797

91 91

91.5 91.5 91.5

NOTE:

To review typical system power ratings use the Active Answers Power Advisor which is available via the online tool located at URL:

www.hp.com/go/proliant-energy-efficient

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

www.hp.com/go/hppoweradvisor

Page 33

QuickSpecs

System Specifications

HP ProLiant DL165 Generation 7

Power

ProLiant DL165 G7 Fully Configured

Fully Loaded System Input Wattage (W)

Fully Loaded System Input Current (A rms)

Fully Loaded System Thermal (BTU- Hr)

Fully Loaded System VA (Volt-Amp)

System Inrush Current with all power supplies loaded (A)

Power cord requirements

NOTE:

Power shown is for a fully configured system consisting of (2) CPU, (8) double-sided DIMMs, (2) HDDs, (1) CD-

ROM, and (2) PCI cards.

Power Cord

Server Power Cords

115V/60Hz 220V/50Hz

568 556

4.99 2.58

1939.15 1898.18

574 567

30 30

Nema 5-15P to IEC320C13

AF556A

One 6' Highline (IEC-IEC) power cord ships standard

NOTE:

IEC320-C13 to IEC320-C14

If customers require a local power cord, they can check the power cord matrix for the appropriate cord. Please see the following power cord matrix:

http://www.hp.com/go/powercordmatrix

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 34

QuickSpecs

Technical Specifications

HP ProLiant DL165 Generation 7

System Unit

Dimensions

(H x W x D) (with bezel)

Weight

(approximate)

Input Requirements

(per 500W power supply)

BTU Rating

Power Specifications

1.70 x 17.64 x 27.59 in (4.32 x 44.80 x 69.95 cm)

Maximum (all hard drives, power supplies, and processors installed)

Minimum (one hard drive, power supply, and processor installed)

Rated Line Voltage

Rated Input Current

Rated Input Frequency

Rated Input Power

Maximum

To review typical system power ratings use the Power Advisor which is available via the online tool located at URL:

www.hp.com/go/hppoweradvisor

32.08 lb (14.55 kg)

27.4 lb (12.43 kg)

100 to 127 VAC 200 to 240 VAC

4.99A (at 115 VAC), 2.46A (at 230 VAC)

47 to 63 Hz

574W (at 100 VAC) 573W (at 200 VAC)

500W

1700 BTU / hr (at 100 VAC) 1700 BTU/hr (at 200 VAC)

- Click on the system of interest. Example: DL165 G7

- Follow the instructions of the next screens.

Power Supply Output

(per power supply)

Optional High Efficiency Power Supply Specifications

Input Requirements

(per power supply)

BTU Rating

Power Specifications

Rated Steady-State Power

Maximum Peak Power

Rated Line Voltage

Rated Input Current

Rated Input Frequency

Rated Input Power

Maximum

To review typical system power ratings use the Power Advisor which is available via the online tool located at URL:

energy-efficient

500 Watts (at 100 VAC), 500 Watts (at 200 VAC)

90-110 VAC, 108-132 VAC 180-264VAC

7.4 A (at 115 VAC),

3.6 A (at 230 VAC)

47 to 63 Hz

846 W (at 115 VAC), 822W (at 230 VAC)

750 W

2550 BTU/hr (at 100 VAC), 2550 BTU/hr (at 200 VAC)

www.hp.com/go/proliant-

- Click on the system of interest. Example: DL165 G7

- Follow the instructions of the next screens.

Power Supply Output

(per power supply)

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Rated Steady-State Power

Maximum Peak Power

750 W (at 100 VAC), 750W (at 200 VAC)

750 W (at 100 VAC), 750 W (at 200 VAC)

Page 35

QuickSpecs

Technical Specifications

HP ProLiant DL165 Generation 7

System Inlet Temperature

Relative Humidity

(non-condensing)

Altitude

Acoustic Noise

Emissions Classification (EMC)

Operating

Non-operating

Operating

Non-operating

Operating

Non-operating

Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA

74) and declared in accordance with ISO 9296 (ECMA 109).

Idle

LWAd

LpAm

Operating

LWAd

LpAm

FCC Rating

Normative Standards

NOTE:

Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements.

10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr (18°F/hr). The upper limit may be limited by the type and number of options installed. System performance may be reduced if operating with a fan fault or above 30°C (86°F).

-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).

10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, non-condensing.

5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing.

3050 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 609 m/min (2000 ft/min).

9144 m (30,000 ft). Maximum allowable altitude change rate is 609 m/min (2000 ft/min).

6.03 B

46.1 dBA

6.08 B

46.4 dBA

Class A

CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 36

QuickSpecs

Technical Specifications

HP ProLiant DL165 Generation 7

HP B110i Smart Array Controller

Smart Array P410/410i Controller

Drives Supported

Channels

Storage Capacity

Data Transfer Method

Maximum SATA Channel Transfer Rate

Maximum Transfer Rate per PCI Bus

(peak)

Protocols

Cable

Internal ATA Connectors

Disk Drive and Enclosure Interface

SAS Connectors

Cache Memory Speed

Server Interface

SAS Speed

Cache Memory

Logical Drives Supported

Host Memory Addressing

RAID Support

Up to 4 SATA devices

4 1.5Gb SATA

3.0TB internal storage

32-bit/33-MHz PCI bus-master

1.5Gb/s per channel

266 MB/s per channel

SATA

PIO Mode[0-4]

SATA

Four SATA connectors

NOTE:

Raid support requires optional slot based raid controller.

6Gb/s SAS (Serial Attached SCSI)

3Gb/s SATA (Serial ATA)

2 internal (Mini-SAS) x8 wide port connectors

DDR2-533MHz with 40 or 72-bit wide bus provides up to 4.2 GB/s maximum bandwidth.

x8 2.5G PCIe 2.0 provides 2GB/s maximum bandwidth

x8 6Gb/s SAS provides 4.8GB/s maximum bandwidth

40-bit 256MB ECC protected cache (72-bit 512MB BBWC module upgrades available); transportable with battery-backed upgrade

Up to 64 logical drives

64-bit, supporting greater than 4GB server memory space

RAID 6, 6+0 (Advanced Data Guarding)

NOTE:

The minimum of 256 MB cache, battery kit, and Smart Array

Advanced Pack License Key upgrade is required to enable RAID 6, 6+0

RAID 5, 5+0 (Distributed Data Guarding)

NOTE:

The 256 MB is required to enable RAID 5, 5+0 support of the

Smart Array P410i

RAID 1+0 (Striping & Mirroring)

RAID 0 (Striping)

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 37

QuickSpecs

Technical Specifications

HP ProLiant DL165 Generation 7

(2x) NC362i Integrated Dual Port Gigabit Server Adapter

Environment-friendly Products and Approach

Network Interface

Data Transfer Method

Controller

Network Transfer Rate

Connector

Cable Support

End-of-life Management and Recycling

Integrated 10/100/1000BASE-T Transceiver

Combines a triple-speed IEEE 802.3TM - Compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver.

Compliant to x1 PCIe Specification

Intel® 82576

10Base-T (Half-Duplex)

10Base-T (Full-Duplex)

100Base-TX (Half-Duplex)

100Base-TX (Full-Duplex)

1000Base-TX (Half and Full-Duplex)

RJ-45 connector

Performs all the physical layer functions for 10BASE-T, 100BASE-T, and 1000BASE-T Ethemet on standard Category 5 UTP

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: please go to: sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

http://www.hp.com/go/green http://www.hp.com/go/green

. To recycle your product, or contact your nearest HP

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.

The information contained herein is subject to change without notice.

Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. AMD, Opteron, and Hyper-Transport are trademarks of AMD Corporation in the United States and other countries.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.

http://www.hp.com/go/green

. These

DA - 13602 Worldwide QuickSpecs — Version 2 — 4.2.2010

Page 38

HP DL165 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Overview

Standard Features

HPC Interconnects

Models

Configuration Information - Factory Integrated Models

Core Options

Additional Options

Memory

Storage

Power Specifications

System Specifications

Technical Specifications