HP DL120 User Manual

QuickSpecs

Overview

HP ProLiant DL120 Generation 6

Front View:

Cover

Power Supply (400 Watt)

Optional Slim 9.5mm DVD ROM

Slide-out System Insight Display

Front USB connectors (2)

Power Button, UID Button, and Front LED Indicators

Support for up to four Non-Hot Plug SATA or SAS Hard Drives

Non Hot Plug Dual Rotor Fans (4)

Two PCI express Slots (one x16, one x4 Lanes)

10.

Processor Socket (Intel® Xeon® Quad-Core)

11.

Six PC3-10600E UB ECC DDR3 Memory Slots

Rear View:

Power supply cable socket

Mouse connector

NIC 1 connector

NIC 2 connector

Serial Connector

Expansion slot 2, PCI-e x8, Low-profile, Half-length

Expansion slot 1, PCI-e x16, Full high, Full-length

UID button/LED

Management NIC connector

10.

Security - Trusted Platform Module Video connector

11.

USB connectors (2)

12.

USB connectors (2)

13.

Keyboard connector

What's New

Support for HP NC365T 4-port Ethernet Server Adapter

At a Glance

The HP ProLiant DL120 G6 Server is an entry-level rack-optimized server providing you with all confidence of a HP ProLiant server. The single processor, 1U server is ideal for single-application IT infrastructure, web and edge-of-network applications. The HP ProLiant DL120 provides two PCI-Express slots with an optional 3rd x4 PCI-Express slot optional upgrades, including HP HBAs and Smart Array Controllers, provide support for SAS hard disk drives. DL120 G6 HP Lights Out 100i Remote Management provides cost-effective remote management from anywhere, anytime. Plus, you get the costeffective solution of a single-processor platform with the performance advantages of quad-core technology.

Processor

Memory

Storage Controller

: Intel® Xeon® processor X3400 series Intel® 3420 Chipset with up to 1333MHz Front Side Bus (FSB)

NOTE:

Intel® Celeron®, Pentium® and Core™ dual-core processors does not support Registered (RDIMM)

memory

: 6 DIMM sockets Supports up to 16GB, using 4GB PC3-10600E DDR3 Unbuffered (UDIMM) memory, operating at 1333MHz when fully populated at 2 DIMMs per Channel in 4 slots Supports up to 16GB, using 4GB Quad-Rank PC3-8500R DDR3 Registered (RDIMM) memory, operating at 1066MHz when fully populated at 2 DIMMs per Channel in 4 slots Supports up to 12GB, using 2GB PC3-10600R DDR3 Registered (RDIMM) memory, operating at 1333MHz when fully populated at 3 DIMMs per Channel in 6 slots

Entry and Base Model: HP Smart Array B110i SATA RAID Controller (RAID 0/1/1+0)

DA - 13504 Worldwide QuickSpecs — Version 8 — 8/20/2010

Page 1

QuickSpecs

Overview

HP ProLiant DL120 Generation 6

NOTE: NOTE:

Performance Model: HP Smart Array P212/256MB Controller (RAID 0/1/1+0/5/5+0)

NOTE:

Internal Drive Support

Up to 4 LFF SATA/SAS HDD drive bays (1) Optional slim 9.5mm DVD-ROM or DVD RW

Network Controller

Embedded HP NC107i PCI Express Gigabit Server Adapter

Expansion Slots

Two total slots:

(1) Full length PCI Express Gen 2 x16 slot (x16 connector) (1) Half-length, low-profile PCI Express x4 slot (x8 connector) Optional (1) PCI-X 1 x1 (x4 connector)

USB 2.0 Ports

Up to 7 Total: (2) front; (1) internal; (4) rear accessible ports Internal USB port (optional) for flexible storage, security, or USB drive key deployment

Infrastructure Management

HP ProLiant Lights-Out 100 simplifies server setup, health monitoring, control, and Lights-Out 100 remote administration. Can be upgraded with a Lights-Out 100 Advanced License for Virtual KVM (remote graphical console) and Virtual Media. With G6, ProLiant 100-series server administrators are able to deploy and monitor their servers using methods similar to 300 series servers and above. Agents and the Easy Set-up CD are available that provide a user experiences consistent with 300 series and above.

With Easy Set-up CD, customers get SmartStart "like" deployment tools that reduce the time required for server setup and updates. Easy Set-up CDs and their ISO images are provided with each ProLiant G6 100-series server and are used to perform assisted installations for one or two servers. Users performing multi-server installations involving large numbers of servers may require the following deployment tools:

With agents and providers, ProLiant 100 series servers get environmental monitoring that is similar and consistent to that of ProLiant 300 series servers and above. This server now offers the HP Insight Management Agents and HP Insight Management WBEM Providers, two well established sets of management and Internet standards technologies that provide capabilities which provide integration to HP Systems Insight Manager (SIM).

Form Factor

1U (1.69" / 4.32 cm) Rack Mount Chassis

27.6" (70.0cm) Deep New fixed mounting rails included with all models

Warranty

: This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.

NOTE:

(3-1-1 warranty in APJ). Additional information regarding worldwide limited warranty and technical support is available at:

Transfer rate: 3Gb/s SATA Available upgrade: HP Smart Array Hot Plug Advance Pack for B110i

Available upgrades: Battery Kit upgrade (for BBWC), and Smart Array Advanced Pack (SAAP)

SmartStart Scripting Toolkit - Automated scalable deployment utility Smart Components - a self-executable software consisting of driver and firmware

Server Warranty includes 3 year Next Day Parts replacement, 0-Years Labor, 0-Years Onsite support.

http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

DA - 13504 Worldwide QuickSpecs — Version 8 — 8/20/2010

Page 2

QuickSpecs

Standard Features

NOTE:

For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information -

Factory Integrated Models" section.

Processor

One of the following depending on Model

Quad-Core Processors

Intel® Xeon® processor HP X3430 (2.40GHz, 95W, 8MB, 1333, Turbo 1/1/2/3)

Intel® Xeon® processor HP X3440 (2.53GHz, 95W, 8MB, 1333, HT, Turbo 1/1/2/3)

NOTE:

Available through Configure To Order only. See Factory Integration Models section for

more details.

Intel® Xeon® processor HP X3450 (2.67GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/4)

Intel® Xeon® processor HP X3460 (2.80GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/5)

NOTE:

Available through Configure To Order only. See Factory Integration Models section for

more details.

Intel® Xeon® processor HP X3470 (2.93GHz, 95W, 8MB, 1333, HT, Turbo 1/1/4/5)

NOTE:

Available through Configure To Order only. See Factory Integration Models section for

more details.

NOTE:

HT indicates that the processor model supports Intel® Hyper-Threading Technology.

NOTE:

Turbo indicates the maximum potential frequency increment when using Intel® Turbo

Boost Technology, with 4, 3, 2, and 1 cores are active.

NOTE:

DDR3 speed is the maximum memory speed of the processor. Actual memory speed may

depend on the quantity and type of DIMMs installed.

Dual-Core Processors

Intel® Celeron® processor G1101 (2.26GHz, 73W, 2MB, 1066)

NOTE:

Available through Configure To Order only. See Factory Integration Models section for

more details.

Intel® Pentium® processor G6950 (2.8GHz, 73W, 3MB, 1066, HT)

Intel® Xeon® processor L3406 (2.28GHz, 30W, 4MB, 1066, HT, Turbo 2/2)

NOTE:

more details.

Intel® Core™ processor i3-530 (2.93GHz, 73W, 4MB, 1333, HT)

NOTE:

Available through Configure To Order only. See Factory Integration Models section for

more details.

Intel® Core™ processor i3-540 (3.06GHz, 73W, 4MB, 1333, HT)

NOTE:

Available through Configure To Order only. See Factory Integration Models section for

more details.

HP ProLiant DL120 Generation 6

Available through Configure To Order only. See Factory Integration Models section for

Cache Memory

Chipset

Memory Protection

Integrated 1x8MB Level3 Intel® Smart Cache

Intel® 3420 Chipset

ECC

DA - 13504 Worldwide QuickSpecs — Version 8 — 8/20/2010

Page 3

QuickSpecs

Standard Features

HP ProLiant DL120 Generation 6

Memory

One of the following depending on Model

Network Controller

Expansion Slots

(Standard)

(Optional)

Type

Standard (Entry Model)

Standard (Base Models)

Standard (Performance Models)

Maximum Memory

NOTE:

Depending on the memory configuration and processor model, the memory speed may run at 1333MHz, 1066MHz, or 800MHz. Please see the Online Memory Configuration Tool at:

www.hp.com/go/ddr3memory-configurator

Embedded NC107i Gigabit Server Adapter

Technology

PCIe G2

PCIe G1

PCI-X

(133MHz,

3.3Volt)

* Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number.

** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the lowest bus)

*** Indicates the number of physical electrical lanes running to a PCI-e connector.

Bus

Width

X16

64-bit

DDR3 1066/1333MHz Unbuffered (UDIMM) and Registered (RDIMM)

2GB (1x2GB) UDIMM

4GB (2x2GB) RDIMM

Supports up to 16GB DDR3 1066/1333 Unbuffered ECC DIMM or 16GB DDR3 800/1066/1333 Registered DIMM. Supports up to 4 UDIMMs or 6 dual rank RDIMMs

***

Connector

Width

x16

N/A

Bus

Number

0 1

0 28

0 1

Device No.

Form

Factor

Full length,

full height

Half height,

low profile

Full length,

full height

slot

Notes

Storage Controllers

Entry and Base Model

Performance Model

HP Smart Array B110i SATA RAID Controller (RAID 0/1/1+0)

NOTE:

Transfer rate: 3Gb/s SATA

NOTE:

SATA Hot Plug available via Hot Plug Advance Pack for B110i

NOTE:

Hot Plug SAS and SATA controllers available via PCI card

option.

NOTE:

Smart Array SAS Controller requires the HP CA ASSY 384SATA

to MINI-SAS Kit (P/N 487734-B21) must be ordered.

HP Smart Array P212/256MB Controller (RAID 0/1/1+0/5/5+0)

DA - 13504 Worldwide QuickSpecs — Version 8 — 8/20/2010

Page 4

QuickSpecs

Standard Features

HP ProLiant DL120 Generation 6

Storage

Maximum Internal Storage Type

Interfaces

Optical Drive

Hard Drives

Hot Plug SAS

Non-Hot Plug SATA

Serial

Pointing Device

Keyboard

Graphics

Network RJ-45

USB 2.0

Optional 9.5mm DVD-ROM, or DVD-RW Drive

Entry Model

Base Model (Cold Plug)

Performance Model (Hot Plug)

8.0TB

1 (rear)

7 (2 front, 1 internal, 4 rear)

NOTE:

Please see the following URL for additional information regarding USB support:

http://h18004.www1.hp.com/products/servers/platforms/usbsupport.html

Up to 4 non-hot plug SATA/SAS 3.5" drives supported. 1x160GB non hot plug SATA 3.5" drive ships standard

NOTE:

SAS requires optional HBA or SA card

Up to 4 non-hot plug SATA/SAS 3.5" drives supported. None ships standard

NOTE:

SAS requires optional HBA or SA

card.

NOTE:

Advance Pack for B110i

NOTE:

plug drives requires HP Smart Array Controller.

Up to 4 hot plug SATA/SAS 3.5" drives supported. None ships standard

(4 x 2TB) 3.5" SAS

(4 x 2TB) 3.5" SATA

SATA Hot Plug available via Hot Plug

Support for additional SAS/SATA hot

Graphics

Form Factor

Embedded Manageability

64MB shared supports all display resolutions up to 1600 x 1200 16bpp @ 75Hz

Rack (1U), (1.69 in/4.32 cm), 27.56" deep

HP ProLiant LO100

HP ProLiant Lights-Out 100, simplifies server setup, control, and lightsout remote administration of ProLiant 100 Series servers and functions without additional software. It can be accessed from any location via LAN or Internet and works hand-in-hand with HP Systems Insight Manager (SIM), helping customers unlock the value of the ProLiant platform and deliver the highest possible quality of IT service to the business. Advanced Licenses are required for Virtual KVM and Virtual Media feature activation.

Key features of LO100 are:

IPMI 2.0 & SMASH CLP support ROM Setup Utility Improvements to virtual media with the addition of USB 2.0 drives and protocol support for much faster transfer speeds and DVDROM support plus simplified virtual media (floppy and CD with no FTTP server requirements) Enhanced browser interface and embedded KVM over IP provides

DA - 13504 Worldwide QuickSpecs — Version 8 — 8/20/2010

Page 5

QuickSpecs

Standard Features

HP Insight Control management software

Core Server Management

Insight Control server deployment

ProLiant 100 Series G6 Core Management Software for ProLiant 100 Series Servers

HP ProLiant DL120 Generation 6

OS-independent remote graphical console 24x7 Technical Support and Update (TSU) 1 year support and license upgrades included in Advanced license

NOTE:

For more information, see:

HP Insight Control server deployment is a deployment solution for HP ProLiant and Integrity servers hosted on a Windows CMS. It automates the process of deploying and provisioning server software, enabling companies to quickly and easily adapt to changing business demands. Insight Control server deployment includes software optimizations for HP servers, including the HP scripting toolkits, configuration jobs for leading industry-standard operating systems, sample unattended files, and HP server support packs that include software drivers, management agents, and important documentation. Deploying servers can be accomplished either through imaging or through scripting.

Insight Control server deployment is hosted on a Windows server and is intended for heterogeneous environments deploying Windows, Linux, VMware ESX and Microsoft Hyper-V systems.

Insight Control server deployment includes one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit:

http://www.hp.com/services/insight

HP provides management solutions that are designed to simplify a server's installation, configuration, and maintenance throughout the entire server lifecycle. This provides the customers with higher levels of operational efficiency and highly reliable systems.

http://www.hp.com/go/lo100

Core Infrastructure Management

HP Systems Insight Manager

Insight Management Agents

While ProLiant 100 series G6 servers do not support the Insight Foundation Suite for ProLiant, they support a key subset of this important suite software tools and utilities which are very suitable for this class of server: SIM, SMH, agents, providers, and a SmartStart 'like' deployment CD called Easy Set-up which greatly simplifies server setup. Additionally the ProLiant DL100 and SL100 G6 models support the SmartStart Scripting Toolkit (SSSTK), an automated scalable deployment utility.

Information on core management supported on ProLiant 100 series G6 servers can be found at these URLS:

Core Management: HP ProLiant 100 series Easy Set-up CDs:

www.hp.com/servers/easysetup

HP Systems Insight Manager (HP SIM) provides a unified, secure and extensible standards-based environment to centrally manage servers, storage and other infrastructure devices, (both HP and non-HP) across multiple operating system platforms.

HP Insight Management Agents and Insight Management Providers are available for HP Systems Insight Manager (SIM) Integration. ProLiant 100-series G6 servers can use the same SNMP based Insight Management Agents supported by other ProLiant servers. As a result, administrators can use HP Systems Insight Manager (SIM) 5.3 and greater to manage ProLiant 100-series G6 servers. Administrators can also use any other SNMP- based management tool. These agents are obtained as part of the ProLiant 100-series model-specific "Easy Set-up" CDs, or through

http://www.hp.com/servers/easysetup

http://www.hp.com/go/coremanagement

The following capabilities are enabled on the 100-series G6 servers by

DA - 13504 Worldwide QuickSpecs — Version 8 — 8/20/2010

Page 6

QuickSpecs

Standard Features

HP ProLiant DL120 Generation 6

the SNMP agents:

Health monitoring capabilities, including monitoring for drives, fans, network, power supplies, and temperature Alerting capabilities, including basic alert notification for Smart Array drive pre-failure only Performance monitoring capabilities providing information on processor, memory, disk free space, network utilization

Easy Set-up CD

SmartStart Scripting Toolkit (SSSTK)

For additional information, please see:

Easy Set-up CDs are available on all 100-series G6 servers and are also available as an ISO image web download. HP ProLiant Easy Setup CDs provide easy, step-by-step, single and multi-server server utilities for the ProLiant 100-series G6 servers to streamline server setup for 100-series G6 servers. The user experience is consistent with SmartStart and offers the following capabilities:

Boot environment and GUI Assisted Installation: Windows 2003 Server and Windows 2008 Server drivers Manual installation: Windows 2003 Server, Windows 2008 Server, and Linux drivers (specific OS support varies by server. Refer to each server's QuickSpecs for supported versions) HP Insight Diagnostics AutoRun Array Configuration Utility (ACU) has been combined with Array Diagnostics Utility (ADU) to offer both configuration of array controllers and storage devices and testing of array controller hardware SmartStart Scripting Toolkit (SSSTK) and Smart Components for software and drivers for DL100 and SL100 servers

NOTE:

OS and SW available for Manual Installation are listed on each servers' QuickSpecs.

The SmartStart Scripting Toolkit is a server deployment product that delivers an unattended automated installation for high-volume server deployments. The SmartStart Scripting Toolkit includes a set of utilities for configuring and deploying servers in a customized, predictable, and unattended manner. These utilities enable you to duplicate the configuration of a source server on target servers with minimum user interaction.

http://www.hp.com/go/insight

The Toolkit is designed for IT experts with experience in scripting operating system installations and configuring ProLiant server hardware.

For additional information, please see:

http://h18004.www1.hp.com/products/servers/management/toolkit/ index.html

Subscriber's Choice

ROMPaq, software and latest drivers

DA - 13504 Worldwide QuickSpecs — Version 8 — 8/20/2010

Subscriber's Choice Driver and Support Alerts/Notifications is a webbased email subscription service that provides software and driver change notifications for ProLiant products. Sign up at:

http://www.hp.com/go/subscriberschoice

and customize your profile to receive various new alerts as they become available, on a weekly or monthly basis.

The latest software, drivers, and firmware fully optimized and tested for your ProLiant server and options; downloaded from Software and Drivers download pages website at: from

www.hp.com/servers/easysetup

HP Insight Management Agents for Systems Insight Manager

http://www.hp.com/go/support

. Contains the following:

and

Page 7

QuickSpecs

Standard Features

HP ProLiant DL120 Generation 6

(SIM) Integration HP Systems Management Homepage Array Configuration Utility (ACU) Array Diagnostics Utility (ADU) HP Insight Diagnostics

Industry Standard Compliance

Intelligent Manageability

Security

ACPI 3.0a

PCI 2.3 Compliant

PXE Support

WOL Support

Microsoft® Logo certifications

USB 2.0

IPMI 2.0

DCMI 1.0

HP ProLiant Lights-Out 100 with optional LO100 Advanced Licenses for Virtual KVM and Virtual Media. Embedded IPMI standard reporting Easy Set-up CD and ISO Image Web downloads Array Configuration Utility (ACU) Array Diagnostics Utility (ADU) HP Insight Diagnostics HP Insight Management Agents and Insight Management Providers for Systems Insight Manager (SIM) Integration

Power-on password Keyboard password USB Port control Removable DVD-ROM Drive Assembly (optional) Dedicated/Shared LO100 management NIC port Administrator's password

Security - Trusted Platform Module

The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used to authenticate the server platform. These artifacts can include passwords, certificates and encryption keys. Windows® BitLocker™ Drive Encryption (BitLocker) is a data protection feature available in Windows Server® 2008. BitLocker leverages the enhanced security capabilities of a Trusted Platform Module (TPM) version 1.2. The TPM works with BitLocker to help protect user data and to ensure that a server running Windows Server 2008 has not been tampered with while the system was offline.

NOTE:

For more information about TPM, including a white paper, go to www.hp.com/go/TPM

NOTE:

ProLiant OS pre-installed units will come with the partition required for TPM deployment.

NOTE:

The TPM key is unique to every TPM deployed server and must be retained. Misplacing or

losing the key could result in data loss.

DA - 13504 Worldwide QuickSpecs — Version 8 — 8/20/2010

Page 8

QuickSpecs

Standard Features

HP ProLiant DL120 Generation 6

Server Power Cords

Power Supply

UPS and PDU Power Cord Matrix

System Fans

Required Cabling

North America

Japan

ROW

NOTE:

HP ProLiant DL120 G6 server ship standard worldwide with a C13 to C14 2M Highline jumper cord. Japanese models also include a 2M Lowline power cord. If customers require a local power cord, they can check the power cord matrix for the appropriate country specific cord. Please see the following power cord matrix:

Auto-sensing 400-Watt PFC Power Supply, CE Mark Compliant

Please see the UPS and PDU cable matrix's on the HP Power Protection and Management page. Under Power Cords, click on the "HP Power Cord Matrix" link. That link will list cable descriptions, requirements, and specifications for UPS and PDU units. Please see the following link:

www.hp.com/products/powercords

4 dual rotor fans ship standard.

For required cabling information, refer to the Web site at:

http://h10010.www1.hp.com/wwpc/us/en/sm/WF05a/15351-15351-3328412-241644-241475-

3579703.html

One 6' Highline (IEC-IEC) power cord ships standard

One 6' Highline (IEC) power cord and one 6' Lowline power cord ship standard

One 6' Highline (IEC) power cord ships standard

http://www.hp.com/go/powercordmatrix

Operating Systems and Virtualization Software

Rack Airflow Requirements

Microsoft Windows Server Red Hat Enterprise Linux (RHEL) SUSE Linux Enterprise Server (SLES)

NOTE:

For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server, please visit our Support Matrix at:

http://www.hp.com/support/DL120G6

Rack 10000 G2 series Cabinets

The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 G2 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.

CAUTION:

adequate airflow and to prevent damage to the equipment:

CAUTION:

This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.

NOTE:

CD provided with the server.

If a third-party rack is used, observe the following additional requirements to ensure

Front and rear doors allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation). Side

: The clearance between the installed rack component and the side panels of the rack

must be a minimum of 2.75 inches (7 cm).

Always use blanking panels to fill all remaining empty front panel U-spaces in the rack.

For additional information, refer to the Setup and Installation Guide or the Documentation

http://www.hp.com/go/supportos

: If your 42U server rack includes closing front and rear doors, you must

and our driver download page

DA - 13504 Worldwide QuickSpecs — Version 8 — 8/20/2010

Page 9

QuickSpecs

Standard Features

HP ProLiant DL120 Generation 6

Rack Kit

Telco Rack Kit

Factory Express Portfolio for Servers and Storage

Quick deploy rail system provides tool-free support for racks with square or round mounting holes (including Compaq/HP 7000, 9000, 10000 G2 and HP series), with an adjustment range of 24" 36". The ambidextrous cable management arm can be mounted on either the left or right side for improved cable management.

Installation into Telco 2 post, and 4 post, or threaded holes racks requires a 3rd party option kit. Go to:

www.hp.com/go/rackandpower

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to:

for more information.

http://www.hp.com/go/factory-express

HP Enterprise Configurator

Service and Support

The HP eConfigure-Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance.

http://www.hp.com/products/configurator

HP Care Pack Services provide total care and support expertise with committed response times designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22-inch and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalizing on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of support solutions provides a range of support services designed to meet the varying needs of your business. Whether an SMB, or large global corporation, HP has ProLiant server support offers to help you speedily deploy and maximize system uptime.

Recommended Service

management.

- simplify ProLiant solution implementation, maintenance, and

Support Deployment Service

Enhanced Service

Support Support Support Plus

DA - 13504 Worldwide QuickSpecs — Version 8 — 8/20/2010

- 3-Year 24x7 4 hr Response service support coverage

- HW Installation only

- optimize service level to increase IT performance and availability.

- 3-Year 24x7 24 hr Call to repair service support coverage

-3-Year 24x7 6 hr Call to repair service support coverage

-24x7 4 hr Response service support including OS coverage

Page 10

+ 23 hidden pages