Expansion slot 1, PCI-e x8, Full high, Full-length (PCI-X
optional)
7.
UID button/LED
8.
Video connector
9.
DL120 G5 HP Lights Out 100c management NIC port
(optional)
10.
NIC Port
11.
Keyboard connector
What's New
What's New
What's NewWhat's New
Adding Quad-Core Intel® Xeon® 3100 and 3300 processor for more performance, flexibility and choice
Support for SAS Hot Plug Enterprise (ENT) Hard Drives
At a Glance
At a Glance
At a GlanceAt a Glance
The HP ProLiant DL120 G5 Server is an entry-level rack-optimized server providing you with all confidence of a HP ProLiant server.
The single processor, 1U server is ideal for single-application IT infrastructure, web and edge-of-network applications. The HP
ProLiant DL120 provides two PCI-Express slots with an option to replace one PCI-Express slot with a PCI-X slot. Optional upgrades,
including HP HBAs and Smart Array Controllers, provide support for SAS hard disk drives. An optional DL120G5 HP Lights Out
100c (LO100c) Remote Management Card provides cost-effective remote management from anywhere, anytime. Plus, you get the
cost-effective solution of a single-processor platform with the performance advantages of dual-core or quad-core.
DA - 13014 North America — Version 6 — August 11, 2008
Page 1
QuickSpecs
Overview
Single-Core Intel® Celeron® 440 processor
Single-Core Intel® Celeron® 420 processor
Intel® 3200 Chipset with up to 1333MHz Front Side Bus (FSB)
Memory
Memory
MemoryMemory
Storage Controller
Storage Controller
Storage ControllerStorage Controller
Internal Drive Support
Internal Drive Support
Internal Drive SupportInternal Drive Support
Network Controller
Network Controller
Network ControllerNetwork Controller
Expansion Slots
Expansion Slots
Expansion SlotsExpansion Slots
USB 2.0 Ports
USB 2.0 Ports
USB 2.0 PortsUSB 2.0 Ports
Management
Management
ManagementManagement
Form Factor
Form Factor
Form FactorForm Factor
Warranty
Warranty
WarrantyWarranty
:
Supports up to 8 GB of PC2-6400 (800 MHz) Unbuffered DDR2 ECC SDRAM Memory
4 DIMM sockets
:
Embedded SATA Controller with RAID 0/1 support
:
Two 3.5" (Large Form Factor) SATA or SAS hard drives
SAS drives require optional SAS Host Bus Adapter (HBA) or Smart Array Controller
Internal storage capacity of up to 1.5TB (2 x 750GB SATA hard drives)
Optional DVD-ROM or DVD-RW optical drive
:
Embedded NC105i Gigabit Server Adapter
:
Two total slots:
(1) Full length PCI Express x8 slot (x8 connector)
Can be replaced with a full-length 64-bit /133MHz PCI-X slot
:
Up to 5 Total: (2) front; (1) internal; (2) rear accessible ports
Internal USB port (optional) for flexible storage, security, or USB drive key deployment
:
Standard Lights Out 100 IPMI 2.0 reporting
DL120G5 HP Lights Out 100c Remote Management Card (Optional)
Front Panel status LEDs including system health and UID
:
1U (1.69" / 4.30 cm) Rack Mount Chassis
27.5" (69.85 cm) Deep
New fixed mounting rails included with all models
:
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP
Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of
purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to
warranty services are available through HP Care Pack services or customized service agreements. SATA hard drives
have a one-year warranty.
NOTE:
NOTE:
Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response.
NOTE:NOTE:
Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two
categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when
customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but
may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional
information regarding worldwide limited warranty and technical support is available at:
Please see the following URL for additional information regarding
2 x 750GB SATA
2 x 450GB SAS
Form Factor
Form Factor
Form FactorForm Factor
Remote Management
Remote Management
Remote ManagementRemote Management
Rack (1U), (1.69 in/4.30 cm), 27.5" deep
Lights-Out 100c
Lights Out LO100c is a Remote Management Card (RMC) for ProLiant 100
series servers that do not have embedded LO100i. The LO100c has all the
features of the LO100i Advanced license and allows customers, or their
service providers, to remotely manage ProLiant servers over a LAN or the
Internet from anywhere, anytime regardless whether the server is located in
the same building, across town, or around the globe.
With LO100c, users can acquire complete remote control with Virtual KVM
(graphical hardware-based, remote console). Users can also access the
server's serial console, control system power, update system firmware and
software, as well as monitor system environmental conditions. The LO100c
remote management card can be accessed from a web browser or
command line interface. This virtual "at-the-server" functionality means
administrators stay in control of remote HP ProLiant 100 series servers.
The HP Lights-Out100c consists of a management processor and firmware
that provides cost-effective, entry-level lights-out functionality, basic system
board management functions, and diagnostics.
Subscriber's Choice Driver and Support Alerts/Notifications is a web-based
email subscription service that provides software and driver change
notifications for ProLiant products. Sign up at:
http://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become
available, on a weekly or monthly basis.
The latest software, drivers, and firmware fully optimized and tested for your
ProLiant server and options, available through software and drivers
download pages website at:
Automatic Server Recovery (ASR)
Integrated Management Log
Drive Parameter Tracking (with Smart Array Controllers)
Dynamic Sector Repairing (with Smart Array Controllers)
Pre-Failure Warranty (covers processors, SAS hard drives, and memory)
BIOS Serial Console
Front and Rear Unit ID (UID) button/LED
Power-on password
Keyboard password
USB Port control
Removable DVD-ROM Drive Assembly (optional)
Dedicated LO100c management NIC port (optional)
Administrator's password
One 6' Highline (IEC-IEC) power cord ships standard
NOTE:
NOTE:
HP ProLiant DL120 G5p server ship standard with a C13 to C14 2M Highline jumper cord. If
NOTE:NOTE:
customers require a local power cord, they can check the power cord matrix for the appropriate cord.
Please see the following power cord matrix:
Auto-sensing 350-Watt PFC Power Supply, CE Mark Compliant
http://www.hp.com/go/powercordmatrix
.
UPS and PDU Power
UPS and PDU Power
UPS and PDU PowerUPS and PDU Power
Cord Matrix
Cord Matrix
Cord MatrixCord Matrix
Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and specifications
for UPS and PDU units:
Windows Server 2003 (web, standard, and enterprise editions; standard and enterprise editions)
Microsoft Small Business Server 2003 R2
Microsoft Windows 2008
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
NOTE:
NOTE:
NOTE: NOTE:
information and how to buy server operating systems from HP please visit the OS product site at:
Rack 10000 series CabinetsRack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum
cooling, allowing these racks to be fully loaded with servers using the latest processors.
CAUTION:
CAUTION:
CAUTION: CAUTION:
adequate airflow and to prevent damage to the equipment:
CAUTION:
CAUTION:
CAUTION: CAUTION:
arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling
that can lead to thermal damage.
NOTE:
NOTE:
NOTE: NOTE:
provided with the server, or to the server documentation located in the Support section at the following
URL:
The DL120 G5 Fixed Rail System supports installation in racks with square or round mounting holes
(including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 24" - 36".
Installation into Telco 2 post, and 4 post, or threaded holes racks requires a 3rd party option kit. Go to:
www.racksolutions.com
If a third-party rack is used, observe the following additional requirements to ensure
Front and rear doors
allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit
adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side
: The clearance between the installed rack component and the side panels of the rack must be
a minimum of 2.75 inches (7 cm).
Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This
For additional information, refer to the Setup and Installation Guide or the Documentation CD
: If your 42U server rack includes closing front and rear doors, you must
.
for more information.
DA - 13014 North America — Version 6 — August 11, 2008
Page 7
QuickSpecs
Standard Features
HP Factory Express
HP Factory Express
HP Factory ExpressHP Factory Express
Capabilities
Capabilities
CapabilitiesCapabilities
Service and Support
Service and Support
Service and SupportService and Support
HP Factory Express offers configuration, customization, integration and deployment services for HP
servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000
servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services for your specific server model please contact your sales
representative or go to:
HP Care Pack Services provide total care and support expertise with committed response times designed
to meet your IT and business needs.
HP Care Pack services include coverage for the HP branded hardware options qualified for the server
that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22inch and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the
same service level and for the same coverage period as the server. Coverage of UPS Battery is not
included and standard warranty terms & conditions apply. For servers or storage systems installed within
a rack, service also covers all HP qualified rack options installed within the same rack.
To fully capitalizing on your HP ProLiant servers' capabilities requires a service partner who thoroughly
understands your server technology and systems environment. HP Services, an industry leader in
provision of support solutions provides a range of support services designed to meet the varying needs of
your business. Whether an SMB, or large global corporation, HP has ProLiant server support offers to
help you speedily deploy and maximize system uptime.
Recommended Service
Recommended Service
Recommended ServiceRecommended Service
Support
Support
Support Support
Deployment Service
Deployment Service
Deployment ServiceDeployment Service
Enhanced Service
Enhanced Service
Enhanced ServiceEnhanced Service
Support
Support
Support Support
Refer to the information on the Installation of a ProLiant on the ProLiant Data Sheet; to be delivered on a
scheduled basis 8am-5pm, M-F, excluding HP holidays.
1MB L2 Cache
1 GB (Standard) to 8 GB (Maximum) of ECC PC2-6400 Unbuffered DDR2
SDRAM Memory
Embedded NC105i Gigabit Server Adapter
Intel® 82801IR Integrated Serial ATA Host Controller
1 x 160GB 3.5" Non-hot-plug SATA
SAS: 600GB maximum; SATA: 1.5TB maximum
NOTE:
NOTE:
NOTE: NOTE:
Optional
Auto-sensing 350-Watt PFC Power Supply, CE Mark Compliant
Rack (1U), (1.69 in/4.30 cm)
4MB L2 Cache
1 GB (Standard) to 8 GB (Maximum) of ECC PC2-6400 Unbuffered DDR2
SDRAM Memory
Embedded NC105i Gigabit Server Adapter
Intel® 82801IR Integrated Serial ATA Host Controller
1 x 160GB 3.5" Non-hot-plug SATA
SAS: 600GB maximum; SATA: 1.0TB maximum
NOTE:
NOTE:
NOTE: NOTE:
Optional
Auto-sensing 350-Watt PFC Power Supply, CE Mark Compliant
Rack (1U), (1.69 in/4.30 cm)
6MB L2 Cache
2GB (2x1GB) (Standard) to 8 GB (Maximum) of ECC PC2-6400 Unbuffered
DDR2 SDRAM Memory
Embedded NC105i Gigabit Server Adapter
Intel® 82801IR Integrated Serial ATA Host Controller
1 x 160GB 3.5" Non-hot-plug SATA
SAS: 600GB maximum; SATA: 1.0TB maximum
NOTE:
NOTE:
NOTE: NOTE:
Optional
Auto-sensing 350-Watt PFC Power Supply, CE Mark Compliant
Rack (1U), (1.69 in/4.30 cm)
SAS requires optional PCI Controller.
SAS requires optional PCI Controller.
DA - 13014 North America — Version 6 — August 11, 2008
The ProLiant Smart Buy program offers a collection of promotional server and option products that are configured with SMB in mind,
offered at discounted prices, and positioned for quick delivery. Smart Buy server offers are available for a limited time only.
Configuration Information - Factory Integrated Models
NOTE:
NOTE:
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
NOTE:NOTE:
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE:
NOTE:
NOTE: NOTE:
servers must start with a CTO Chassis.
NOTE:
NOTE:
NOTE: NOTE:
NOTE:
NOTE:
NOTE: NOTE:
Step 1: Base Configuration (choose one of the following configurable models)
Step 1: Base Configuration (choose one of the following configurable models)
Step 1: Base Configuration (choose one of the following configurable models)Step 1: Base Configuration (choose one of the following configurable models)
Models
Models
ModelsModels
HP does not allow factory integration of options into standard models listed above. Configure-to-order
This product offering does not support HP Factory Express Server Configuration Level 1.
FIO indicates that this option only available as a Factory Installable Option.
DL120 CTO (Configure-To-Order) Non-Hot Plug Chassis
Includes
Includes
IncludesIncludes
Embedded NC105i Gigabit Server Adapter
1 full length PCI Express x8 slot (x8 lane) and 1 half length low profile PCI Express x8
slot (x4 lane)
Intel® 82801IR Integrated Serial ATA Host Controller
Rack (1U) form factor, (1.69 in/4.30 cm)
Fixed, mounting rails
:
468653-B21
Step 2: Choose Required Options (only one of the following from each list unless otherwise
Step 2: Choose Required Options (only one of the following from each list unless otherwise
Step 2: Choose Required Options (only one of the following from each list unless otherwiseStep 2: Choose Required Options (only one of the following from each list unless otherwise
noted)
Configuration Information - Factory Integrated Models
Hard Drives
Hard Drives
Hard DrivesHard Drives
Step 3: Choose Additional Options for Factory Integration (only one of the following from
Step 3: Choose Additional Options for Factory Integration (only one of the following from
Step 3: Choose Additional Options for Factory Integration (only one of the following fromStep 3: Choose Additional Options for Factory Integration (only one of the following from
each list unless otherwise noted)
each list unless otherwise noted)
each list unless otherwise noted)each list unless otherwise noted)
Storage Controllers
Storage Controllers
Storage ControllersStorage Controllers
SATA Non-Hot Plug Midline (MDL) Drives
SATA Non-Hot Plug Midline (MDL) Drives
SATA Non-Hot Plug Midline (MDL) DrivesSATA Non-Hot Plug Midline (MDL) Drives
HP 750GB 3G SATA 7.2K NHP 3.5" MDL HDD
HP 500GB 3G SATA 7.2K NHP 3.5" MDL HDD
HP 250GB 3G SATA 7.2K NHP 3.5" MDL HDD
SATA Non-Hot Plug Entry (ETY) Drives
SATA Non-Hot Plug Entry (ETY) Drives
SATA Non-Hot Plug Entry (ETY) DrivesSATA Non-Hot Plug Entry (ETY) Drives
HP 160GB 3G SATA 7.2K NHP 3.5" ETY HDD
SAS Enterprise (ENT) Drives 3.5", Non-Hot Plug
SAS Enterprise (ENT) Drives 3.5", Non-Hot Plug
SAS Enterprise (ENT) Drives 3.5", Non-Hot PlugSAS Enterprise (ENT) Drives 3.5", Non-Hot Plug
HP 450GB 3G NHP 15K 3.5" DP SAS ENT
HP 300GB 3G NHP 15K 3.5" DP SAS ENT
HP 146GB 3G NHP 15K 3.5" DP SAS ENT
HP 300GB SAS 3.5" 15K NHP
HP 146GB SAS 3.5" 15K NHP
HP 72GB SAS 3.5" 15K NHP
SAS Controllers (Required if NHP SAS Hard Drive selected in Step 2)
SAS Controllers (Required if NHP SAS Hard Drive selected in Step 2)
SAS Controllers (Required if NHP SAS Hard Drive selected in Step 2)SAS Controllers (Required if NHP SAS Hard Drive selected in Step 2)
HP Internal SAS/SATA 4-Port Cable
NOTE:
NOTE:
NOTE: NOTE:
a HBA or SAS controller is selected.
HP Smart Array E200/128 BBWC Controller
HP Smart Array P800/512 MB BBWC Controller
SAS HBA
SAS HBA
SAS HBASAS HBA
HP SC44Ge Host Bus Adapter
HP SC40Ge Host Bus Adapter
NOTE:
NOTE:
NOTE:NOTE:
options may not be available for factory integration. Please contact an HP sales
representative for additional information.
This cable option kit is automatically included in any CTO configuration when
For additional options, please refer to the "Options" section below. Some
SAS Enterprise (ENT) Drives 3.5", Non-Hot PlugSAS Enterprise (ENT) Drives 3.5", Non-Hot Plug
HP 450GB 3G NHP 15K 3.5" DP SAS ENT
HP 300GB 3G NHP 15K 3.5" DP SAS ENT
HP 146GB 3G NHP 15K 3.5" DP SAS ENT
HP 300GB SAS 3.5" 15K NHP
HP 146GB SAS 3.5" 15K NHP
HP 72GB SAS 3.5" 15K NHP
NOTE:
NOTE:
NOTE: NOTE:
drives Support details, please see the following:
HP Smart Array P800/512MB BBWC Controller
HP SA-P400 and SA-E500 24 In Battery Cable Kit
NOTE:
NOTE:
NOTE: NOTE:
installing a battery into the server if a Smart Array E500 is integrated outside of the
factory. For all solutions, please refer to the server QuickSpecs and User's Manual for
detailed installation instructions.
SAS HBA
SAS HBA
SAS HBASAS HBA
NOTE:
NOTE:
NOTE: NOTE:
of the 4 Lane SAS/SATA host fan out Cable Kit. (P/N 457692-B21)
HP SC44Ge Host Bus Adapter
NOTE:
NOTE:
Please see the following QuickSpecs for Technical Specifications and
For recommended tape drive offerings for this ProLiant server see the following:
USB Tape Drives
USB Tape Drives
USB Tape DrivesUSB Tape Drives
HP StorageWorks 1U USB Rack-Mount Kit with one DAT 72 USB Tape Drive
HP StorageWorks 1U USB Rack-Mount Kit with one DAT 160 USB Tape Drive
Ultrium Tape Drives
Ultrium Tape Drives
Ultrium Tape DrivesUltrium Tape Drives
NOTE
NOTE
: For the DL120 G5, HP recommends purchasing the HP SC11Xe HBA
NOTENOTE
(412911-B21) for a dedicated SCSI HBA for tape.
HP StorageWorks 1U SCSI Rack-mount kit with one LTO-2 Ultrium 448 SCSI Tape
Drive (Carbonite)
NOTE: NOTE:
compatible with multiple Single-Ended and LVD SCSI tape drives including the DAT
40, DAT 72, DAT 160, LTO-1 Ultrium 232, LTO-2 Ultrium 448, LTO-3 Ultrium 920
and LTO-4 Ultrium 1769 tape drives.
HP StorageWorks 1U USB Rack-Mount Kit
NOTE:
NOTE:
NOTE: NOTE:
is compatible with the DAT 40 USB, DAT 72 USB and DAT 160 USB tape drives.
NOTE:
NOTE:
For a complete listing of HP tape drive offerings supported with the DL120
Cat5e cables are required to connect Interface Adapters to Console Switches.
http://www.hp.com/go/kvm
For additional information regarding KVM switches, Serial Console servers,
.
.
AF601A
AF602A
AF604A
336044-B21
336045-B21
262588-B21
262587-B21
AF611A
AF612A
AF613A
HP Serial Console Server
HP Serial Console Server
HP Serial Console ServerHP Serial Console Server
Options
Options
OptionsOptions
Service and Support
Service and Support
Service and SupportService and Support
Offerings
Offerings
Offerings Offerings
Services)
(HP Care Pack
HP 16 Port Serial Console Server
HP 48 Port Serial Console Server
Serial Adapter, RJ45-DB9 DCE Female, 1 Pack
Serial Adapter, RJ45-DB9 DCE Female, 8 Pack
NOTE:
NOTE:
NOTE: NOTE:
Servers. Additional Serial Adapters and Cat5e cables can be found at the following
URL:
NOTE:
NOTE:
NOTE: NOTE:
rack mount monitors, keyboards and all related options please see the following URL:
http://www.hp.com/go/kvm
Hardware Services On-site Service
Hardware Services On-site Service
Hardware Services On-site ServiceHardware Services On-site Service
NOTE:
NOTE:
NOTE:NOTE:
Care Packs must be used. For other service levels, order standard Care Pack part
numbers.
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 5-Day x 24-Hour Coverage, 3 Years, Electronic
NOTE:
NOTE:
NOTE:NOTE:
site Service to Smart Buy servers. For other service levels, order standard Care Pack
part numbers.
DL120 Smart Buy 4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years,
Electronic
DL120 Smart Buy 4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Hardware Services Next Business Day On-Site Service
Hardware Services Next Business Day On-Site Service
Hardware Services Next Business Day On-Site ServiceHardware Services Next Business Day On-Site Service
9-Hour x 5-Day Coverage, 3 Years, Electronic
Installation & Start-up Services
Installation & Start-up Services
Installation & Start-up ServicesInstallation & Start-up Services
Hardware Services 6-Hour Call to Repair On-Site Service
Cat5e cables are required to connect Serial Adapters to Serial Console
http://www.hp.com/go/kvm
For additional information regarding KVM switches, Serial Console servers,
To attach 3 year, 4-Hour On-site Service to Smart Buy servers, Smart Buy
Use one of the following Smart Buy Care Packs to attach 3 year, 4-Hour On-
.
.
AF101A
AF102A
AF103A
AF110A
UJ252E
UJ253E
UK645E
UK646E
UJ251E
UJ254E
DA - 13014 North America — Version 6 — August 11, 2008
Memory configurations listed do not apply to "Factory Integrated Models".
NOTE:NOTE:
Standard Memory
Standard Memory
Standard MemoryStandard Memory
NOTE:
NOTE:
NOTE: NOTE:
1 GB installed (1 x 1 GB SDRAM DIMM) on Dual-Core (E2160 and 3065) models.
2 GB installed (2 x 1 GB SDRAM DIMMs) on Quad-Core (X3320) model.
Standard Memory Plus Optional Memory
Standard Memory Plus Optional Memory
Standard Memory Plus Optional MemoryStandard Memory Plus Optional Memory
Up to 8 GB memory is available with the optional installation of PC2-6400 ECC DDR2 SDRAM Memory kits.
NOTE:
NOTE:
NOTE:NOTE:
interleaved mode configurations. For dual-bank interleaved mode, DIMMs must be installed in both banks with equal bank
capacities.
Following are memory options available from HP:
2 GB Unbuffered PC2-6400 ECC DIMM (1 x 2 GB)
1 GB Unbuffered PC2-6400 ECC DIMM (1 x 1 GB)
512 MB Unbuffered PC2-6400 ECC DIMM (1 x 512 MB)
One of the following depending on model:
The chart below does not represent all possible configurations. For best performance, HP recommends dual-bank
Memory
Memory
MemoryMemory
Optional
Optional
OptionalOptional
Standard
Standard
StandardStandard
Optional
Optional
OptionalOptional
Standard
Standard
StandardStandard
Maximum
Maximum
MaximumMaximum
DIMM_CH1_C
DIMM_CH1_C
512 MB
512 MB
512 MB512 MB
1 GB
1 GB
1 GB1 GB
1 GB
1 GB
1 GB1 GB
2 GB
2 GB
2 GB2 GB
8 GB
8 GB2 GB
8 GB8 GB
DIMM_CH1_CDIMM_CH1_C
DIMM_CH1_A
DIMM_CH1_A
DIMM_CH1_ADIMM_CH1_A
Empty
Empty
EmptyEmpty
Empty
Empty
EmptyEmpty
Empty
Empty
EmptyEmpty
Empty
Empty
EmptyEmpty
2 GB2 GB
2 GB2 GB
512 MB
512 MB
512 MB512 MB
1 GB
1 GB
1 GB1 GB
512 MB
512 MB
512 MB512 MB
1 GB
1 GB
1 GB1 GB
2 GB2 GB
2 GB2 GB
Slot
Slot
SlotSlot
DIMM_CH2_D
DIMM_CH2_D
DIMM_CH2_DDIMM_CH2_D
Empty
EmptyEmpty
EmptyEmpty
Empty
EmptyEmpty
EmptyEmpty
Empty
Empty
EmptyEmpty
Empty
Empty
EmptyEmpty
2 GB2 GB
2 GB2 GB
DIMM_CH2_B
DIMM_CH2_B
DIMM_CH2_BDIMM_CH2_B
Empty
EmptyEmpty
Empty
EmptyEmpty
512 MB
512 MB
512 MB512 MB
1 GB
1 GB
1 GB1 GB
2 GB
2 GB2 GB
Mode
Mode
ModeMode
Single-bank
Single-bank
Single-bankSingle-bank
Single-bank
Single-bank
Single-bankSingle-bank
Dual-bank
Dual-bank
Dual-bankDual-bank
interleaved
interleaved
interleavedinterleaved
Dual-bank
Dual-bank
Dual-bankDual-bank
interleaved
interleaved
interleavedinterleaved
Dual-bank
Dual-bank
Dual-bankDual-bank
interleaved
interleaved
interleavedinterleaved
450260-B21
450259-B21
450258-B21
DA - 13014 North America — Version 6 — August 11, 2008
Page 21
QuickSpecs
Storage
Drive Support
Drive Support
Drive SupportDrive Support
Removable Media
Removable Media
Removable MediaRemovable Media
12.7mm IDE DVD-ROM
or DVD-RW Drive
3.5" SAS Non-Hot Plug Drives
3.5" SAS Non-Hot Plug Drives
3.5" SAS Non-Hot Plug Drives3.5" SAS Non-Hot Plug Drives
450GB 3G SAS 15K
300GB 3G SAS 15K
146GB 3G SAS 15K
72GB 3G SAS 15K
NOTE:NOTE:
drive) deactivates 1 of the hard drive bays. Actual hard drive bay deactivated depends on where split cable plugs into SAS drive
connector. Example: 3x SAS cable connector plugged into SAS drive connector (5-8) on the back of the hard drive cage would
mean drive bay 8 is deactivated.
HP StorageWorks USB
HP StorageWorks USB
HP StorageWorks USBHP StorageWorks USB
Tape
Tape
TapeTape
DAT 72 USB
DAT 160 USB
1U USB Rack-Mount Kit
HP StorageWorks SCSI
HP StorageWorks SCSI
HP StorageWorks SCSIHP StorageWorks SCSI
Tape
Tape
TapeTape
Ultrium 448
DAT 72
DAT 160
1U SCSI Rack-Mount Kit
HP StorageWorks RDX
HP StorageWorks RDX
HP StorageWorks RDXHP StorageWorks RDX
Removable Disk Backup
Removable Disk Backup
Removable Disk BackupRemovable Disk Backup
System
System
SystemSystem
RDX160
RDX320
HP StorageWorks D2D
HP StorageWorks D2D
HP StorageWorks D2DHP StorageWorks D2D
Backup Systems
Backup Systems
Backup SystemsBackup Systems
D2D120
D2D130
D2D2503i
For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the following:
For an up-to-date listing of the latest O/S Support details for each of the Tape Autoloaders and Tape Libraries listed below,
- Click on the system of interest. Example: DL120 G5
- Follow the instructions of the next screens.
Rated Steady-State Power
Maximum Peak Power
Operating
Non-operating
Operating
Non-operating
350 W (at 115/230 VRMS),
350 W (at 115/230 VRMS)
350 W (at 115/230 VRMS),
350 W (at 115/230 VRMS)
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 300 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if operating
with a fan fault or above 30°C (86°F).
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, noncondensing.
5 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature, noncondensing.
DA - 13014 North America — Version 6 — August 11, 2008
Listed are the declared A-Weighted sound power levels (LWAd) and declared
average bystander position A-Weighted sound pressure levels (LpAm) when
the product is operating in a 23°C ambient environment. Noise emissions
were measured in accordance with ISO 7779 (ECMA 74) and declared in
accordance with ISO 9296 (ECMA 109).
Idle
LWAd
LpAm
Operating
LWAd
LpAm
3050 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500 ft/min).
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation.
End-of-life Management
End-of-life Management
End-of-life ManagementEnd-of-life Management
and Recycling
and Recycling
and Recyclingand Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at:
be used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
. To recycle your product, please go to:
or contact your nearest HP sales office.
. These instructions may
Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 13014 North America — Version 6 — August 11, 2008
Page 28
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.