24 ✕ Max
IDE
CD-ROM
and ISA
Plug-n-Play
Audio Board
24 ✕ Max
IDE
CD-ROM
and ISA
Plug-n-Play
Audio Board
24 ✕ Max
IDE
CD-ROM
and ISA
Plug-n-Play
Audio Board
LANOS
noNT
4.0
WS
yesWin
95
4.0
WS
yesNT
4.0
WS
1
17
1.Windows NT 4.0 WS or Windows 95 operating system is preloaded on those models
indicated in the table. Models with Windows NT 4.0 WS operating system come with a
downgrade coupon for Windows NT 3.51 or Windows 95.
Mini-Tower Vectras
HP Vectra VL 6/xxx MT Series 6 PC 17-1
Page 2
HP Vectra VL 6/xxx MT Series 6 PC Series
Supported Accessories
32-MB kit (2 ✕ 16-MB) 32-bit EDO, 60 ns main memory modulesD3648B
64-MB kit (2 ✕ 32-MB) 32-bit EDO, 60 ns main memory modulesD4543A
128-MB kit (2 ✕ 64-MB) 32-bit EDO, 60 ns main memory modulesD5188A
20 ✕ 16-MB, 32-bit EDO, 60 ns main memory modulesD3649A
4 MB, 50 ns video memory upgrade kit for Matrox Millennium II boardD5487A
Documentation
User’s Guide Manual KitD5050A
Input Devices
HP mouse C3751B
HP keyboard for Windows® 95C4735A
Video Displays
All current HP Displays (see the HP Vectra Accessory Service Handbook)
1
17
Mass Storage
ZIP 100 MB IDE Disk DriveD4390A
2.5-GB IDE hard diskD2678A
4.3-GB IDE hard diskD2677A
24✕ Max IDE CD-ROM driveD4383A
Multimedia
Multimedia sound accessory kit (24✕ Max CD-ROM drive, Plug-and-Play ISA
audio board, headphones, cables, CD-ROM drive tray)
1.The PC’s BIOS must be of version HD.07.03 or later for the D5188A memory
accessory to work correctly. The version number is displayed when you start
your PC. If necessary, download the latest version of the HP Vectra VL6 Series 6
BIOS from
http://www.hp.com/go/vectrasupport.
D5182A
17-2 HP Vectra VL 6/xxx MT Series 6 PC
Mini-Tower Vectras
Page 3
HP Vectra VL 6/xxx MT Series 6 PC Series
System Board, BIOS, and Memory
Processor: Pentium II
module with integrated
heatsink, level-1 and level2 cache memory.
VRM: Always use the
VRM that is supplied
with the processor.
System Board
Switches: See the
table on the next
page.
B
A
Mini-Tower Vectras
Main Memory: 1 bank containing a pair of 16 MB or 32 MB
C
modules. Install pairs of identical modules in each bank, up to a
maximum of 192 MB.
HP Vectra VL 6/xxx MT Series 6 PC 17-3
17
Page 4
HP Vectra VL 6/xxx MT Series 6 PC Series
System Board Switches
SwitchFunctionDefault
1-5-Processor frequency, see the following table-
OpenNormal operation
6
ClosedClears CMOS (to reload the Setup program defaults)
1.Switch settings if these processor frequencies become available.
OpenDisables keyboard power-on
ClosedNormal operation
OpenNormal operation
ClosedClears product identification field
Switch
Local Bus
12345
1
OpenOpen66 MHzOpenClosedOpen3 : 1
1
OpenOpen66 MHzClosedOpenClosed4.5 : 1
1
OpenOpen66 MHzClosedClosedOpen5 : 1
Frequency
SwitchFrequency
Ratio
Processor :
Local Bus
ClosedClosed3.5 : 1
Closed
Open
17
BIOS History
For the latest BIOS, the flasher utility program, and the BIOS history refer to the
HP World Wide Web site.
17-4 HP Vectra VL 6/xxx MT Series 6 PC
http://www.hp.com/go/vectrasupport
Mini-Tower Vectras
Page 5
HP Vectra VL 6/xxx MT Series 6 PC Series
Matrox Millennium II Video Memory Upgrade
Models with the Matrox MGA Millennium Pro graphics controller are supplied
with 4 or 8 MB of video memory. A 4 MB video memory upgrade module can be
orderd from HP (D5487A).
Mini-Tower Vectras
17
HP Vectra VL 6/xxx MT Series 6 PC 17-5
Page 6
HP Vectra VL 6/xxx MT Series 6 PC Series
Part Numbers
1
a
2a
2
b
2b
3
16
4
11
17
19
18
20
8
22
13
17
24
23
17-6 HP Vectra VL 6/xxx MT Series 6 PC
5
6
21
10
7
9
12
14
15
25
Mini-Tower Vectras
Page 7
HP Vectra VL 6/xxx MT Series 6 PC Series
Parts List for HP Vectra VL 6/xxx MT Series 6 PC
ItemDescriptionRepl.
Part Number
1Box assembly:
aAirflow guide and fan (assembly)
bI/O panel blank
2Front bezel assembly
aLock status panel
bFiller panel 5.25 inch
3VL MT logo5042-1494
4Power switch and cable5064-3331
5Cover lock assembly5062-5590
6Rear bezel connector label5024-2672
IDE hard disk drive
7
2.5 GB—D2678-69001
4.3 GB
4.0 GB
6.4 GB
8IDE hard disk cable
9Rail kit (3 × 5.25 inch)
10Flexible disk drive
11Flexible disk drive cable
12