Page 1
Mini-Tower Vectras
HP Vectra XU 6/xxx PC 1-1
1
1
HP Vectra XU 6/xxx PC
Models and Accessories
1. Windows NT 3.51 WS is supplied on CD-ROM (not preloaded).
2. D4340B has CPL: 05/96
Product
Number
Hard
Drive
Disk
Controller
Video
Controller
Std.
RAM
Multimedia
LAN OS1
Vectra XU 6/xxx PC
HP Vectra XU 6/150 PC (CPL: 12/95 )
D3528A None Integrated
SCSI and
IDE
controller
Matrox
MGA
Millennium
board,
(2 MB,
upgradeable
to 4 MB or
8MB)
16 MB 4✕ SCSI
CD-ROM
(D2992B)
and
Sound
Blaster16
10 / 100 VGNone
D3529N 1 GB
(D2920A)
NT
3.51
WS
D3530N 2 GB
(D2926A)
HP Vectra XU 6/150 PC (CPL: 06/96 )
D3528B None Integrated
SCSI and
IDE
controller
Matrox
MGA
Millennium
board,
(2 MB,
upgradeable
to 4 MB or
8MB)
32 MB 4✕ SCSI
CD-ROM
(D2992B)
and
Sound
Blaster16
10 / 100 VGNone
D3529B 1 GB
(D2920A)
NT
3.51
WS
D3530B 2 GB
(D2926A)
HP Vectra XU 6/180 PC (CPL: 04/96 )
D4340A None Integrated
SCSI and
IDE
controller
Matrox
MGA
Millennium
board,
(2 MB,
upgradeable
to 4 MB or
8MB)
16 MB 4✕ SCSI
CD-ROM
(D2992B)
and
Sound
Blaster16
10 / 100 VGNone
D4340B
2
32 MB
D4341N 1 GB
(D2920A)
NT
3.51
WS
D4342N 2 GB
(D2926A)
Page 2
HP Vectra XU 6/xxx PC Series
1-2 HP Vectra XU 6/xxx PC
Mini-Tower Vectras
1
Note
The IntelTM Pentium Pro processor has 256 KB of integrated level-two cache memory.
All models are supplied with a 1.44 MB (D2035B) Flexible Disk Drive.
1. Windows NT 3.51 WS is supplied on CD-ROM (not preloaded); Windows NT 4.0 WS is
preloaded.
2. D4345B has CPL: 05/96
Product
Number
Hard
Drive
Disk
Controller
Video
Controller
Std.
RAM
Multimedia
LAN OS1
HP Vectra XU 6/180 PC (CPL: 11/96 )
D4342B 2 GB
(D2926A)
Integrated
SCSI and
IDE
controller
Matrox
MGA
Millennium
board,
(2 MB,
upgradeable
to 4 MB or
8MB)
32 MB 8✕ IDE
CD-ROM
(D4381A)
and
Sound
Blaster16
10 / 100 VGNT
3.51
WS
D4343A None None
D4344N 2 GB
(D2926A)
10 / 100
BT
HP Vectra XU 6/200 PC (CPL: 04/96 )
D4345A None Integrated
SCSI and
IDE
controller
Matrox
MGA
Millennium
board,
(2 MB,
upgradeable
to 4 MB or
8MB)
16 MB 4✕ SCSI
CD-ROM
(D2992B)
and
Sound
Blaster16
10 / 100 VGNone
D4345B
2
32 MB
D4346N 1 GB
(D2920A)
NT
3.51
WS
D4347N 2 GB
(D2926A)
HP Vectra XU 6/200 PC (CPL: 11/96 )
D4347B 2 GB
(D2926A)
Integrated
SCSI and
IDE
controller
Matrox
MGA
Millennium
board,
(2 MB,
upgradeable
to 4 MB or
8MB)
32 MB 8✕ IDE
CD-ROM
(D4381A)
and
Sound
Blaster16
10 / 100 VGNT
3.51
WS
D4348A None None None
D4349N 2 GB
(D2926A)
10 / 100 BTNT
3.51
WS
D4350N 4 GB
(D2797A)
D4352N
✕2 Proc
64 MB
D4353N 2 GB
(D2926A)
32 MB NT
4.0
WS
D4354N 4 GB
(D2797A)
Page 3
HP Vectra XU 6/xxx PC Series
Mini-Tower Vectras
HP Vectra XU 6/xxx PC 1-3
1
Supported Accessories
1. Dual Processor Kits include: processor, voltage regulator module and heatsink.
16-MB (2 ✕ 8-MB), ECC 60-ns main memory upgrade kit (72-bit),
Interleave 8
D3556A
32-MB (2 ✕ 16-MB), ECC 60-ns main memory upgrade kit (72-bit),
Interleave 8
D3555B
32-MB (2 ✕ 16-MB), ECC 60-ns main memory upgrade kit (72-bit),
Interleave 16
D3555A
64-MB (2 ✕ 32-MB), ECC 60-ns main memory upgrade kit (72-bit),
Interleave 16
D3554B
128-MB (2 ✕ 64-MB), ECC 60-ns main memory upgrade kit (72-bit),
Interleave 64
D3540A
Note: To order the appropriate main memory upgrade kit, check the PC memory
configuration using the “HP Vectra XU 6/xxx & VT 6/xxx Memory Configuration
Utility”. This utility will indicate the supported accessories.
2-MB video memory (WRAM) upgrade kit D3557A
User’s Guide Manual Kit D3538B
Dual Processor Kits
1
150 MHz models D3559A
180 MHz and 200 MHz models D4351A
Input Devices
HP mouse C3751B
HP keyboard for Windows® 95 C4725A
Video Displays
All current HP Displays (see the HP Vectra Accessory Service Handbook)
Mass Storage
1-GB Fast SCSI-2 hard disk D2920A
2-GB Fast SCSI-2 hard disk D2926A
4-GB Fast SCSI-2 hard disk D2797A
540 MB IDE hard disk D2918A
1-GB IDE hard disk D2919A
Flexible disk 3.5-inch 1.44-MB (1-inch high) D2035B
SCSI 4✕ CD-ROM drive D2992B
IDE 8✕ CD-ROM drive D4381A
Rail kit (3.5-inch) D3566A
Rail kit (5.25-inch) D2880A
Page 4
HP Vectra XU 6/xxx PC Series
1-4 HP Vectra XU 6/xxx PC
Mini-Tower Vectras
1
System Board, BIOS, and Memory
Page 5
HP Vectra XU 6/xxx PC Series
Mini-Tower Vectras
HP Vectra XU 6/xxx PC 1-5
1
System Board Switches
BIOS History
The latest BIOS, the flasher utility program, and the BIOS history can each be
obtained from the HP Electronic Services.
Switch Function Default
1 OFF Retain configuration in EEPROM, normal position
OFF
ON Clears EEPROM
2 OFF Enables User and Administrator passwords
OFF
ON Clears User and Administrator passwords
3 OFF Disables secure switch (off position)
OFF
ON
Enables secure switch (on position) - prevents
modification of SETUP values and flashing of BIOS
4
Local bus frequency, see following table
ON
5 OFF
6
Processor : local bus frequency ratio, see following table
ON
7 OFF
8 OFF
Switch
Local Bus
Frequency
Switch Frequency
Ratio
Processor :
Local Bus
Processor
Frequency
45 678
ON OFF 60 MHz ON OFF OFF 2.5 : 1 150 MHz
OFF OFF 66 MHz
ON OFF OFF 2.5 : 1 166 MHz
ON OFF 60 MHz OFF ON OFF 3 : 1 180 MHz
OFF OFF 66 MHz OFF
ON OFF 3 : 1 200 MHz
Page 6
HP Vectra XU 6/xxx PC Series
1-6 HP Vectra XU 6/xxx PC
Mini-Tower Vectras
1
Main Memory
The PC has four banks on the system board for installing main memory; banks
A, B, C and D. Each bank consists of two sockets. The PC is supplied with 16, 32
or 64 MB of main memory (two memory modules installed in one bank). The PC
uses 60-ns ECC DRAM.
Memory modules must be installed in identical pairs, so that each bank with
memory installed contains two memory modules of the same size and type.
The PC is supplied with one bank of memory modules. This can be a pair of
modules of type “interleave 8” or a pair of type “interleave 16”. These can be
replaced or extended with memory modules of the same type.
Main memory on an “interleave 8” type of PC can be extended to a maximum of
128 MB by replacing the 16 MB base memory with four D3555B kits (32 MB each
kit). Main memory can be extended to a maximum of 112 MB without replacing
the base memory.
Main memory on an “interleave 16” type of PC can be extended to a maximum
of 512 MB by replacing the 32 MB base memory with four D3540A kits (128 MB,
“interleave 64” each kit). Main memory can be extended to a maximum of
416 MB without replacing the base memory.
To order the appropriate main memory upgrade kit, check the PC memory
configuration using the “HP Vectra XU 6/xxx & VT 6/xxx Memory Configuration
Utility”. This utility will indicate the supported accessories.
Page 7
HP Vectra XU 6/xxx PC Series
Mini-Tower Vectras
HP Vectra XU 6/xxx PC 1-7
1
Video Memory
The PC is supplied with 2 MB of video memory for 1600×1200 in 256 colors. An
additional 2 MB of video memory can be installed by adding a D3557A module
in the video memory socket; this will make a total of 4 MB for 1600×1200 in 64 K
colors. Alternatively, an additional 6 MB of video memory can be installed by
adding an MGA-MIL/MOD6 module in the video memory socket (ordered from
Matrox); this will make a total of 8 MB for 1600×1200 in 16.7 M colors.
Installing a Dual Processor
No jumper changes are involved when installing a second Pentium Pro (P6 or
P6S) processor.
Matrox Video Board Switches
Switch Function
1
· OFF to prevent Video BIOS upgrades - DEFAULT
· ON to allow Video BIOS upgrades
2
· OFF for single-screen operation - DEFAULT
· ON for dual-screen operation (with second VGA controller)
Page 8
HP Vectra XU 6/xxx PC Series
1-8 HP Vectra XU 6/xxx PC
Mini-Tower Vectras
1
Part Numbers
Page 9
HP Vectra XU 6/xxx PC Series
Mini-Tower Vectras
HP Vectra XU 6/xxx PC 1-9
1
1. For optional disk drive information, see the Accessory Service Handbook.
2. If a J2585A is being replaced (in all models whose CPL is before 11/96) by a J2585B, new
drivers must be installed.
Parts List for HP Vectra XU 6/xxx PC
Item Description Repl.
Part Number
Exchange
Part Number
1 Box assembly:
a Speaker assembly
b Cover lock assembly
c Status panel kit
d Multimedia control panel
e Bumper foot
5063-9010
5063-4559
5062-5590
5063-9008
5063-9003
02225-00010
—
2 HP Vectra XU 6/150 logo
HP Vectra XU 6/180 logo
HP Vectra XU 6/200 logo
5042-1447
5042-1805
5042-1806
—
—
—
3 Filler panel 3.5 inch 5042-1405 —
4 Filler panel 5.25 inch 5042-1178 —
5 Multimedia bezel 5042-1421 —
6 Fan 5063-9004 —
7
Hard disk drive
(standard) 1:
1-GB Fast SCSI-2
2-GB Fast SCSI-2
4-GB Fast SCSI-2
D2920-63001
D2926-63001
D2797-63001
D2920-69001
D2926-69001
D2797-69001
8 HDD 3.5-inch bracket 5001-6864 —
9 HDD tray 5002-1935 —
10 Power supply assembly 5063-8799 —
11 Flexible disk drive D2035-63121 —
12 CD-ROM drive (standard) :
4✕ SCSI
8✕ IDE
D2992-63032
D4381-63001
—
D4381-69001
13 Rail kit (3.5-inch) D3566A —
14 Rail kit (5.25-inch) D2880A —
15 Ultra Fast IDE cable (for HDD)
Ultra Fast IDE cable (for CD-ROM)
5064-0284
5182-3544
—
16 Headphones 5063-8800 —
17 SCSI CD-ROM to audio cable
IDE CD-ROM to audio cable
5182-5412
5182-1857
—
18 Airflow guide 5063-9005 —
19 Flexible disk cable 5182-3567 —
20 System board See PC’s system board parts list
21 Matrox MGA Millennium board 5063-8798 —
22 HP 10/100 VG LAN board (J2585B
2
)
HP 10/100 BT LAN board
J2585-61011
J3171-61001
—
23 SCSI cable 5182-3540 —
24 SCSI terminator 0960-0888 —
Page 10
HP Vectra XU 6/xxx PC Series
1-10 HP Vectra XU 6/xxx PC
Mini-Tower Vectras
1
1. Electronic file only.
System Board Parts List for HP Vectra XU 6/xxx PC
Description Repl.
Part Number
Exchange
Part Number
System board:
Vectra XU 6/150
models D3528A, D3529N, D3530N
with serial number less than SG610xxxxx
D3528-63002 D3528-69002
Vectra XU 6/150
models D3528A, D3529N, D3530N
with serial number ≥ SG10xxxxx
D3528B, D3529B, D3530B (all serial numbers)
D4340-63001 D4340-69001
Vectra XU 6/180 and 6/200, CPL before 11/96:
models D4340A/B, D4341N, D4342N,
D4345A/B, D4346N, D4347N)
D4340-63001 D4340-69001
Vectra XU 6/180 and 6/200, CPL at 11/96:
models D4342B, D4343A, D4344N,
D4347B, D4348A, D4349N, D4350N, D4352N)
D4340-63002 D4340-69002
Processors:
Intel Pentium Pro (P6) 150 MHz 5063-8791 —
Intel Pentium Pro (P6) 180 MHz 5063-8755
Intel Pentium Pro (P6) 200 MHz 5063-8756
Heat-sink and clip 5063-8793 —
Voltage regulator module (VRM) 5063-8794 —
Main memory modules:
1 ✕ 8-MB, 60-ns ECC RAM, interleave 8 5063-8795 —
1 ✕ 16-MB, 60-ns ECC RAM, interleave 8 1818-6660 —
1 ✕ 16-MB, 60-ns ECC RAM, interleave 16 5063-8796 —
1 ✕ 32-MB, 60-ns ECC RAM, interleave 16 1818-6661 —
Video memory module:
2 MB video memory module D3557-63001 —
Support Manuals for HP Vectra XU 6/xxx PC
Familiarization Guide D3538-90901
Technical Reference Manual: hardware and BIOS
D3538-90911
1
Software for HP Vectra XU 6/xxx PC
XU/VT 6/xx Installation Boot Diskette 5064-0242
XU/VT Drivers and documentation CD-ROM 5011-3805
XU 6/xx & VT 6/xx Memory Configuration Utility Available via HP
Electronic Services
Loading...