Hp D2826S, D2826A User Manual

HP D2826S
HP D2826A
15-inch Color Monitor
13.7-inch Viewable Image
User’s Guide
15-Zoll-Farbbildschirme
13.7 Zoll Bildanzeige
Benutzerhandbuch
Moniteurs couleur 15 pouces
Affichage 13,7 pouces
Pantallas de color de 15 pulgadas
13.7 pulgadas de imagen visualizada
Manual del Usuario Léase esto primero
Video a colori da 15 pollici
13.7 effetivi per l’immagine
Manuale utente
Notice
The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the impl ied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Hewlett-Packard assumes no responsibility for the use or reliability of its software on equipment that is not furnished by Hewlett­Packard. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company.
Hinweis
Inhaltliche Änderungen vorbehalten. Hewlett-Packard übernimmt keine Garantie welcher Art auch immer für diese Ausrüstung, einschließlich der (doch nicht begrenzt auf die) Qualitätsgarantie und die Garantie bezüglich Eignung für einen bestimmten Zweck. Hewlett-Packard haftet nicht für in dieser Dokumentation enthaltene Fehler oder für unbeabsichtigte oder indirekte Schäden in Verbindung mit der Lieferung, der Leistung oder der Benutzung der Ausrüstung. Hewlett-Packard übernimmt keine Haftung fur den Betrieb oder die Zuverlässigkeit seiner Software, wenn diese auf Hardware benutzt wird, die nicht von Hewlett-Packard geliefert wurde. Dieses Dokument enthalt proprietäre Informationen, die durch das Copyright geschützt sind. Alle Rechte vorbehalten. Dieses Dokument darf ohne vorherige schriftliche Genehmigung der Hewlett-Packard Company weder ganz noch teilweise fotokopiert, reproduziert oder übersetzt werden.
Avertissement
Les informations contenues dans ce document peuvent être modifiées sans préavis. Hewlett-Packard ne donne aucune garantie de quelque sorte que ce soit concernant, sans que ce soit limitatif, les garanties implicites de qualité commerciale de ce matériel, ou la bonne adaptation de celui-ci à un usage particulier. Hewlett-Packard n’est pas responsable des erreurs pouvant apparaître dans ce manuel et n’est pas non plus responsable des dommages directs ou indirects résultant de l’équipement, des performances et de l’utilisation de ce matériel. Hewlett-Packard ne saurait être tenu pour responsable de l’utilisation et de la fiabilité de son logiciel sur des matériels non fournis par Hewlett-Packard. Les informations contenues dans ce document sont originales et protégées par copyright. Tous droits réservés. L’acheteur s’interdit en conséquence de les photocopier, de les reproduire ou de les traduire dans toute autre langue, sauf accord préalable et écrit de Hewlett-Packard.
Aviso
La información contenida en este documento está sujeta a cambios sin previo aviso. Hewlett-Packard no ofrece ningún tipo de garantía con respecto a este material, incluyendo, pero sin limitarse a, las garantías implícitas de comerciabilidad e idoneidad para un fin determinado. Hewlett-Packard no asume responsabilidad alguna por los posibles errores contenidos o por los daños casuales o emergentes relacionados con el suministro, funcionamiento o uso de este material. Hewlett-Packard no asume responsabilidad alguna por el uso o fiabilidad de su software en equipos que no hayan sido fabricados por Hewlett-Packard. Este documento contiene información patentada, protegida por las leyes del copyright. Reservados todos los derechos. Ninguna parte de este documento puede ser fotocopiada, reproducida o traducida a otro idioma sin la autorización previa y por escrito de Hewlett-Packard Company.
Avviso
Le informazioni contenute in questo documento sono soggette a cambiamento senza preavviso. Hewlett-Packard non rilascia garanzie di alcun tipo riguardo a questo materiale, comprese le garanzie implicite di commerciabilità e di idoneità per uno scopo particolare. Hewlett-Packard non sarà ritenuta responsabile per errori contenuti in questo documento, né per danni accidentali o conseguenti alla fornitura, alle prestazioni o all’uso di questo materiale. Hewlett-Packard non si assume alcuna responsabilità riguardo all’uso o all’affidabilità del proprio software su apparecchiature di altri produttori. Questo documento contiene informazioni di proprietà protette da copyright. Tutti i diritti sono riservati. Nessuna parte di questo documento può essere fotocopiata, riprodotta o tradotta in un’altra lingua senza un precedente consenso scritto di Hewlett-Packard Company.
Hewlett-Packard France 38053 Grenoble Cedex 9 France
© 1998 Hewlett-Packard Company
Francais
1
Full scan screen that gives an edge to edge image
0.28 mm dot pitch for excellent graphics
Non-glare, anti-static, screen coating
Controls for brightness, contrast, image position, and image geometry.
Status indicator
HP D2826S and HP D2826A 15-inch Color Monitors
13.7-inch Viewable Image
User’s Guide
On/Off switch
HP 15” Color Monitor User’s Guide
Important Safety Instructions
Important Safety Instructions
Before you plug in your new monitor, read these important safety instructions.
WARNING
Connect the monitor only to a grounded power outlet. Use the power cord supplied with the monitor or one with a properly grounded plug. Ensure the cable meets your country’s standards for safety.
This monitor operates on all power systems, including “IT” power systems. To completely disconnect power at the monitor, remove the power cord from the power outlet. Ensure that the power outlet is easily accessible.
Make sure the power to your computer is “off” before connecting or disconnecting any monitor peripheral.
To reduce the risk of electric shock, do not remove cover(or back). There are no user servicable parts inside. Refer servicing to qualified service personnel.
The monitor is quite heavy(the weight is shown in the technical specifications). We recommend you ask the assistance of a second person when lifting or moving it.
USA and Canada
If the power cord is not supplied with your monitor, select the proper power cord according to your national electric safety codes.
USA: use a UL Listed detachable power cord.
Canada: use a CSA certified detachable power cord.
Si le cordon secteur n’est pas livré avec votre moniteur, utiliser un cordon secteur en accord avec votre code électrique national.
USA: utiliser un cordon secteur UL Listé.
Canada: utiliser un cordon secteur certifié CSA.
2 English
HP 15” Color Monitor User’s Guide
What Your New Monitor Offers
What Your New Monitor Offers
Your HP monitor is a 15-inch (13.7-inch viewable image), high resolution, multi-synchronous color monitor. Multi-synchronous means that the monitor supports a range of video modes. It is optimized to be used with all Hewlett-Packard PCs.
Your HP color monitor has the following features:
A 15-inch flat square tube, with a 13.7-inch viewable image, and
0.28 mm dot pitch for excellent graphics. Anti-static, non-glare screen coating to minimize reflection.
Support for video modes up to SVGA 800x600 at 85Hz refresh rate,
giving a flicker free image and reduced eye-strain.
Support for Ultra VGA 1024x768 at 60Hz refresh rate.
Direct access to brightness and contrast controls.
Image adjustment using controls on the front panel. You can adjust the
image size, position and shape. Monitor power management system (VESA1 standard) controlled from
suitably equipped HP PCs to automatically reduce the power consumption of the monitor. Complies with the Energy Star Computers Program initiated by the US EPA
Packard has determined that this product meets the Energy Star guidelines for energy efficiency
Monitor Plug and Play capability (VESA DDC1/2B standard) that enables
the monitor to identify itself to suitably equipped HP PCs. Compliance with ISO 9241-3, ISO 9241-8 and ZH-1/618 ergonomic
standards. Complies with MPRII guidelines for upper limits of electrical and
electrostatic emissions, from the Swedish National Board for Measurement and Testing.
2
.
As an Energy Star Partner, Hewlett
3
.
1. VESA is the Video Electronics Standards Association
2. The US EPA is the United States Environmental Protection Agency
3. ENERGY STAR is a US registered service mark of the US EPA.
English 3
HP 15” Color Monitor User’s Guide
Setting Up Your Monitor
Setting Up Your Monitor
Attaching the Tilt and Swivel Base
Your display has a tilt and swivel base. To fit and tilt the swivel base:
Turn the display on its side (never on the screen). Identify the front
1
of the base. Locate the slots in the underside of the display.
2
Slide the base towards the front of the display until the locking tab
3
on the base clicks into place.
1
2
3
Where to Place the Monitor
Place your monitor on a flat sturdy surface.
Ensure the operating site is free from excessive heat, moisture, dust and sources of electromagnetic fields. Sources of electromagnetic fields include transformers, motors, and other monitors.
Avoid exposing the monitor to direct sunlight.
4 English
HP 15” Color Monitor User’s Guide
Setting Up Your Monitor
Connecting the Cables
CAUTION Before you connect any cables, or install your HP monitor, refer to the
safety instructions at the beginning of this manual. Refer also to the user manual which accompanies your PC and video adapter to ensure this equipment is correctly installed.
Make sure that your PC and monitor are switched off.
1
Connect the video cable (it has a 15-pin plug) to the video outlet on
2
your PC. Tighten the thumbscrews on the plug. Connect the power cord to the monitor.
3
Plug the power cord into a grounded power outlet.
4
1 PC and Monitor OFF
2
Video cable
3
Power cords
4
NOTE The location of your PC’s video outlet may be different to the one shown
in the diagram. Refer to the manual that came with your PC, if necessary.
English 5
HP 15” Color Monitor User’s Guide
Using Your Monitor
Using Your Monitor
The on/off switch is on the front of the monitor.
You can adjust the quality, position, size and shape of the displayed image using the controls on the front of the monitor.
Contrast
Shift LED Indicator
On/Off Switch
Status Indicator
Shift Button
Adjustment Buttons
Contrast
Brightness
Your monitor is automatically demagnetized each time it is switched ON. This ensures color purity. To maintain color purity, we recommend that each week you switch the display off for at least 30 minutes before switching it on again.
Adjusting the Quality of the Displayed Image
To adjust the contrast, press the button to release the control, rotate to achieve required contrast, then press again to hide the control. Contrast is the difference in brightness between the dark and light parts of the displayed image.
Brightness
To adjust the overall picture brightness, press the button to release the control, rotate to achieve required brightness, then press again to hide the control. The brightness should be set so that the dark areas of the displayed image remain black.
6 English
HP 15” Color Monitor User’s Guide
Using Your Monitor
Recall Factory Settings
Horizontal Size
Horizontal Position
Vertical Size
Vertical Position
Shift Key
To revert to the default settings for all video modes, verify that the shift LED is ON, and press the recall button.
Adjusting the Size and Position of the Displayed Image
When making the following adjustments, verify that the shift LED is switched OFF.
To adjust the horizontal size of the displayed image, press the button, then use the and adjustment controls.
To adjust the horizontal position of the displayed image, press the button, then use the and adjustment controls.
To adjust the vertical size of the displayed image, press the button, then use the and adjustment controls.
To adjust the vertical position of the displayed image, press the button, then use the and adjustment controls.
Adjusting the Shape of the Displayed Image
Adjustments to the shape of the displayed image are performed using a second level of controls. To access this second level press the button. This shift LED is illuminated to show that you are using the second level controls.
Trapezoid Correction
Pincushion Correction
To adjust the displayed image if its vertical edges do not appear parallel, press the button, then use the and adjustment controls to correct the distortion.
To adjust the displayed image if its vertical edges appear to bow in or out, press the button, then reshape using the and adjustment controls.
English 7
HP 15” Color Monitor User’s Guide
Using Your Monitor
Setting the Amount of Displayed Information
To set the amount of displayed information, change the screen resolution of your PC. The higher the screen resolution, the more
information you can see on the screen. It is recommended that you use a resolution of 800 large amount of displayed information, and a flicker-free image.
You can make adjustments to the displayed image and they are automatically saved for the resolution you are using. For example, if you adjust your monitor when working in SVGA those settings are saved for SVGA. If you then work in VGA and change the image settings, they are saved for VGA. The next time you switch back to SVGA, your previous settings are used automatically.
To find out which resolutions are supported by your monitor, refer to “What Video Modes are Supported” on page 10. To change the screen resolution, please refer to the manual that came with your PC or your operating system documentation, if necessary.
×
600 at 85Hz. This gives easy-to-read characters, a
Your monitor has a Plug and Play capability (VESA DDC1/2B standard) that enables it to identify itself to suitably equipped HP PCs. This will automatically give you the best refresh rate for the resolution that you have set. Also, by using the appropriate software (when available), you can adjust the monitor settings directly from your PC.
Minimizing Eye Strain
To avoid screen flicker and minimize eye strain, use the highest supported image refresh rate for the chosen resolution. It is
×
recommended that you use a resolution of 800 refresh rate. The image refresh rate is the number of times per second that the image is refreshed.
To find out which image refresh rates are supported by your monitor, refer to “What Video Modes are Supported” on page 10. To set the image refresh rate (also known as the vertical frequency), refer to the manual that came with your PC or your operating system documentation, if necessary. If your PC supports Plug and Play, it will automatically select the best refresh rate for the screen resolution you have set.
8 English
600 with an 85Hz
HP 15” Color Monitor User’s Guide
Using Your Monitor
Minimizing Energy Consumption
If your PC supports VESA monitor power management (available on many HP PCs), you can minimize the power consumed by the monitor. There are two power saving modes:
Suspend mode1 (uses less than 15 W). In this mode, the monitor’s
front panel indicator light is yellow. Sleep mode2 (uses less than 8 W). In this mode, the monitor’s front
panel indicator light is amber.
To set these power saving modes, refer to the manual that came with your PC. If your screen is not displaying an image, check the front panel indicator light first — your monitor may be in a power saving mode.
1. Suspend mode is activated when horizontal sync is cut by the video controller.
2. Sleep mode is activated when both vertical and horizontal sync are cut by the video controller, this may also be referred to as Off MODE.
English 9
HP 15” Color Monitor User’s Guide
What Video Modes are Supported
What Video Modes are Supported
Your monitor supports the video modes shown in the table below.
Screen Resolution Image Refresh Rate Video Solution
640×400 70 Hz VGA 640×480 60 Hz VGA 640×480 75 Hz Ergonomic VGA 640×480 85 Hz Ergonomic VGA 800×600 60 Hz Super VGA 800×600 75 Hz Ergonomic Super VGA 800×600 85 Hz Ergonomic Super VGA
1024×768 60 Hz Ultra VGA 1024
CAUTION Selecting a video mode on your PC with a screen resolution/image
×
refresh rate combination higher than 1024
768 at 60Hz can damage
your monitor.
10 English
PICTURE TUBE
INPUT SIGNAL
INTERFACE
HP 15” Color Monitor User’s Guide
Technical Specifications
Technical Specifications
Size 15-inch flat screen/ 13.7-inch viewable image Phosphorous Red, Green, Blue P22 (medium short persistence) Dot pitch 0.28 mm Face Plate Anti-glare, anti-static, screen coating Video 0.7 Vp p analog RGB Synchronization TTL level separate synchronisation (negative/positive) Input Connector 15-pin mini D-SUB
SCANNING FREQUENCY
WARM-UP TIME
PIXEL CLOCK
DISPLAY SIZE
POWER SOURCE
OPERATING ENVIRONMENT
CABINET DIMENSIONS
WEIGHT
TILT/SWIVEL STAND
Horizontal 31 to 54kHz Vertical 50 to 120 Hz 30 minutes to reach optimum performance level
65 MHz
202mm±3mm
×
270
AC 90 to 264 V, 47 to 63 Hz, 90W (max), less than 15 W in Suspend mode, less than 8W in Sleep mode,
Temperature 0 °C to 40 °C (operating)
- 25°C to +70 °C (storage) Humidity 10% RH through 80% RH (without condensation) 396(H) × 372(W) × 396(D) mm (including pedestal)
13 kg
Tilt Angle - 5° to +15 Swivel Angle
±90°
°
English 11
HP 15” Color Monitor User’s Guide
Care and Cleaning
Care and Cleaning
Do not place anything on top of the monitor. Doing so may block the monitor vents and cause damage to the monitor due to overheating.
Do not let liquid get on or into the monitor.
To maximize screen life and prevent damage to the picture tube (such as burned phosphor due to leaving the same image on the screen for a long time), it is recommended that you:
Use the monitor power management system (on HP PCs) or a screen
saver program.
Avoid setting contrast and brightness to their maximum levels for
prolonged periods.
If you do not have a power management system or a screen saver
program, switch the monitor off or reduce the brightness and contrast to minimum levels when the monitor is not in use.
Your monitor has an anti-glare, anti-static screen coating. To prevent damage to the monitor screen’s coating, use a regular household glass cleaner when cleaning the screen. To clean the screen:
Switch the monitor off and remove the power plug (pull the plug, not
1
the cable).
Wet a soft cotton cloth with the cleaning solution and gently wipe the
2
screen. Do not spray cleaner onto the screen because the cleaner may drip inside the monitor.
Dry with a clean, soft cotton cloth.
3
Do not use cleaning solutions containing fluoride, acids, or alkalis.
12 English
HP 15” Color Monitor User’s Guide
Environmental Information
Environmental Information
HP has a strong commitment toward the environment. Your HP monitor has been designed to respect the environment as much as possible.
HP can also take back your old monitor for recycling when it reaches the end of its useful life.
HP has a product take-back program in several countries. The collected equipment is sent to of HP’s recycling facilities in Europe or the USA. As many parts as possible are reused. The remainder is recycled. Special care is taken for batteries and other potentially toxic substances, which are reduced to non-harmful components through a special chemical process. If you require more details about HP’s product take-back program, contact your dealer or your nearest HP Sales Office.
The cathode ray tube used in this monitor does not contain cadmium.
English 13
HP 15” Color Monitor User’s Guide
Regulatory Information
Regulatory Information
DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name: HEWLETT-PACKARD
Manufacturer’s Address: 5, Avenue Raymond Chanas - EYBENS
38053 GRENOBLE CEDEX 09 FRANCE
declares, that the product:
Product Name: HP 15-inch Color Monitor
Model Number: D2826S, D2826A
conforms to the following product specifications:
International: IEC 950:1991 + A1 + A2 +A3 +A4
SAFETY
Europe: EN 60950:1992 + A1 + A2+A3
CISPR 22:1993+A1 / EN 55022:1994 - Class B
EMC
EN 50082-1:1992
IEC 801-2:1992 / prEN 55024-2:1992 - 4kV CD, 8 kV AD IEC 801-3:1984 - 3V/m IEC 801-4:1988 / prEN 55024-4:1992 - 1 kV Power Lines
IEC 555-2:1982 + A1:1985 / EN 60555-2:1987 IEC 1000-3-3:1994 / EN 61000-3-3:1995
Supplementary information: Directive 93/68/EEC and the Low Voltage Directive 73/23/EEC, and carries the CE marking accordingly.
Grenoble, February 1998. Quality Manager
the product herewith complies with the requirements of the EMC Directive 89/336/EEC amended by the
Jean Marc JULIA
14 English
WARNING
HP 15” Color Monitor User’s Guide
Regulatory Information
Notice for the USA: FCC Statement
Federal Communications Commission (FCC) Radio Frequency Interference Statement (USA Only)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protections against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try one of more of the following measures:
Relocate the radio or television antenna.
Move the computer away from the radio or television.
Plug the computer into a different electrical outlet, so that the computer and the radio or television are on separate electrical circuits.
Make sure that all your peripheral devices are also FCC Class B certified.
Make sure you use only shielded cables to connect peripheral devices to your computer.
Consult your computer dealer, Hewlett-Packard, or an experienced radio/television technician for help.
Hewlett-Packard’s system certification tests were conducted with HP-supported peripheral devices and HP shielded cables, such as those you received with your system. Cables used with this computer must be properly shielded to comply with the requirements of the FCC.
Changes or modifications not expressly approved by Hewlett-Packard could void the user’s authority to operate the equipment.
X-Ray Radiation Notice
When operating, this product emits x-rays; however, it is well shielded and meets the safety and health requirements of various countries, such as the Radiation Act of Germany and the Radiation Control for Health and Safety Act of the United States.
Radiation emitted by this product is less than 0.1 mR/hr (1uSv/hr) at a distance of 10 centimeters from the surface of the cathode ray tube. The x-ray radiation primarily depends on the characteristics of the cathode ray tube and its associated low voltage and high voltage circuitry. Internal controls have been adjusted to ensure safe operation. Only qualified personnel should perform any internal adjustments as specified in the service manual for this product.
Replace the cathode ray tube with an identical CRT only.
General Notice
The HP D2826S and D2826A 15-inch Color Monitors have been tested according to MPR 1990:8 for Emission properties and meets the guidelines as given by MPR 1990:10 (2.01 - 2.04)
English 15
HP 15” Color Monitor User’s Guide
Regulatory Information
Notice for Korea
Notice for Japan
Notice for Canada
This Class “B” digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la Classe B respecte toutes les exigences du règlement sur le matériel brouilleur du Canada.
Notice for the United Kingdom
The HP D2826S and D2826A are approved under Approval Number NS/G/1234/J/100003 for indirect connection to public telecommunications systems within the United Kingdom.
16 English
Paper not bleached with chlorine
Part Number: 5967-0370
Printed in Taiwan 03/98
Loading...