Compaq Presario
Easy Access Wireless Keyboard,
Mouse and Receiver
Installation Guide
Trådlöst Easy Access-tangentbord,
mus och mottagare
Installationsguide
Easy Access Wireless
Keyboard, Mouse and Receiver
English
Introduction
Ensure you have the following contents in your
wireless keyboard and mouse accessory kit.
■
Wireless Keyboard
■
Wireless Optical Mouse
■
Receiver with a USB cable
■
Four (4) AA alkaline batteries
■
This user documentation.
Easy Access Wireless Keyboard, Mouse and Receiver
1
Installing the Keyboard and Mouse
Install the batteries in the keyboard and mouse. Your wireless device uses AA Alkaline batteries.
Note:
Follow the indicators in the battery compartment for proper battery placement in the keyboard and mouse.
Easy Access Wireless Keyboard, Mouse and Receiver
2
Setting Up the
Wireless Devices
1 Connect the receiver to the USB port on your
computer.
A
3 Press the Connect button A on the receiver.
The status light on the receiver will flash for a
few seconds when the Connect button is
pressed.
4 While the status light is flashing, press the
Connect button B on the keyboard.
B
English
5 Press the Connect button A on the receiver.
The status light on the receiver will flash for a
2 Turn on the computer. The computer must be
on when you change the ID settings by
pressing the Connect button.
Easy Access Wireless Keyboard, Mouse and Receiver
few seconds when the Connect button is
pressed.
3