1
Printer Specifications
Chapter contents
Printer description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Hardware description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Firmware description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
FCC compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Environmental Product Stewardship Program . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Material safety data sheet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Regulatory statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
C4224-90962
Chapter contents
1
Printer description
The HP LaserJet 1100 Printer is the next generation low-cost HP LaserJet printer. It
provides 600 dots-per-inch (dpi) LaserJet features and add-on scanner capabilities at the
lowest possible price. The scanner is 300 dpi/8 bits per pixel (bpp) and contains an
automatic document feed (ADF) holding up to 20 pages.
The HP LaserJet 1100 Printer prints eight pages-per-minute (ppm). It provides an excellent
Windows printing solution, ease of use, and higher performance. With 600 dpi resolution, the
HP LaserJet 1100 Printer has exceptional text and graphics print quality. The simplified
Control Panel and improved paper handling make this product very simple to use. The
HP LaserJet 1100 Printer also provides modular scanner capability.
This product is sold in three configurations:
1. Printer Only:
• C4224AHP LaserJet 1100 Printer
• C4225AHP LaserJet 1100 xi Printer (U.S.)
• C4226AHP LaserJet 1100 si Printer (U.S.)
2. Printer and Scanner:
• C4218A HP LaserJet 1100A Printer-Copier-Scanner
• C4219A HP LaserJet 1100A xi Printer-Copier-Scanner (U.S.)
• C4220AHP LaserJet 1100A se Printer-Copier-Scanner (U.S.)
3. Scanner Only:
• C4221A Copier-Scanner for HP LaserJet 1100 Printer
2 Chapter Printer Specifications
C4224-90962
Hardware description
The HP LaserJet 1100 Printer engine prints eight pages per minute. The HP LaserJet 1100
Printer has a compact design with vertical paper trays.
There is one main Paper Input Bin with a 125-sheet capacity for continuous, multiple-page
printing. Manual, single-sheet printing is possible through the Single Sheet Input Slot. Both
trays are center justified for all supported paper sizes. The output tray holds up to 100
sheets.
The HP LaserJet 1100 Printer has a very fast first-page-out, at less than twenty seconds. It
has a Control Panel containing two LEDs. A third LED is located on the Go Key. The
formatter board contains 4 MB of ROM, 2 MB of RAM, and a 32-bit MCF5202 chip. There is
one slot availab le f or DIMM Memory Expansion (supporting a 4 MB, 8 MB, or 16 MB DIMM).
The HP LaserJet 1100 Printer engine has a 7,000 pager-per-month duty cycle and has no
fan. The toner life for the HP LaserJet 1100 Printer is 2,500 pages. The attachable scanner
has two Control Panel buttons and up to 20-page ADF.
C4224-90962
Figure 1-1 Control panel
Hardware description
3
Firmware description
The firmware in the HP LaserJet 1100 Printer includes:
• Enhanced PCL 5 with Status Readback
• 26 scalable Intellifont Fonts
• Full page 600 dpi bitmap
• 600 dpi
• Pixel Placement, Mosaic Characters
• Memory Enhancement technology (MEt) with Hardware Compression/Decompression
The HP LaserJet 1100 Printer firmware also has REt and EconoMode functionality. Scan
capability for the scanner attachment includes 300 dpi and 256 levels of gray (8 bpp).
4 Chapter Printer Specifications
C4224-90962
Specifications
Table 1-1. Printer specifications
Environmental specifications
Operating
environment
Storage
environment
Acoustics
Noise level During printing:
Printer plugged into an AC outlet:
• Temperature: 10° C to 32.5° C (50° F to 90.5° F)
• Humidity: 20% to 80% (no condensation)
Printer unplugged from an AC outlet:
• Temperature: 0° C to 40° C (32° F to 104° F)
• Humidity: 10% to 90% (no condensation)
• 6.1 Bels sound power level (per ISO 9296)
(HP LaserJet 1100 Printer tested at 8 ppm)
• Sound pressure level (bystander position): 47 dB
• Sound pressure level (operator position): 55 dB
• Silent during standby and sleep mode
Electrical specifications
Power requirements • 100-120v (+/-10%), 50/60 Hz (+/-2); 127v, 60Hz NOM
or
• 220v (+/-10%), 50/60 Hz (+/-2 Hz)
• 220-240v (+/-10%), 50 Hz (+/-2 Hz)
Power consumption • During printing: 200 watts (average)
• During standby and power save: 6 watts
Minimum
recommended
circuit capacity
4.5A @ 115v; 2.5A @ 230v
C4224-90962
Specifications
5
Table 1-1. Printer specifications (continued)
Physical specifications
Dimensions (1100) • Width: 367 mm (14.5 inches)
• Depth: 306 mm (12.8 inches)
• Height: 266 mm (14.9 inches)
Weight (cartridge
• 7.2 kg (16.1 lb)
installed)
1100A • Width: 367 mm (14.5 inches)
• Depth: 402 mm (15.8inches)
• Height: 378 mm (14.9 inches)
Weight • 8.7 kg (19.2 (lb)
Printer capacities and ratings
Print speed 8 pages per minute (Letter size paper)
Paper input bin
capacity
Paper output bin
125 sheets of regular weight 20 lb (75 g/m
10 envelopes
100 sheets of regular weight 20 lb (75 g/m
capacity
2
) paper or up to
2
) paper
Minimum paper size 76 x 127 mm (3 x 5 inches)
Maximum paper
size
Base memory 4 MB of ROM and 2 MB of RAM
Upgrade memory
expansion
Print resolution 600 dots per inch (dpi)
Duty cycle 7,000 single-sided pages per month
Scanning Capacities and Ratings
6 Chapter Printer Specifications
216 x 356 mm (8.5 x 14 inches)
One DIMM slot available for a 4 MB, 8 MB, or 16 MB RAM
DIMM
C4224-90962
Table 1-1. Printer specifications (continued)
Scan Speed Up to 8 pages per minute (Letter size paper)
Input Capacity
Up to 20 pages of regular weight 20 lb (75 g/m
Minimum Paper Size 51 x 89 mm (2 x 3.5 inches)
Maximum Paper
216 x 762 mm (8.5 x 30 inches)
Size
Scan Resolution 300 dots per inch 256 levels of gray
Duty Cycle 2,500 pages per month
2
) paper
C4224-90962
Specifications
7
FCC compliance
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy. If it is not installed and
used in accordance with the instructions, it may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interf erence to radio or tele vision
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase separation between equipment and receiver.
• Connect equipment to an outlet on a circuit different from that to which the receiver is
located.
• Consult your dealer or an experienced radio/TV technician.
NOTE: Any changes or modifications to the printer that are not expressly approved b y HP could void
the user’s authority to operate this equipment.
Use of a shielded interface cable is required to comply with the Class B limits of Part 15 of
FCC rules.
8 Chapter Printer Specifications
C4224-90962
Environmental Product Stewardship Program
Protecting the Environment
Hewlett-Packard Company is committed to providing quality products in an environmentally
sound manner. This HP LaserJet printer has been designed with several attributes to
minimize impacts on our environment.
This HP LaserJet printer eliminates:
Ozone production
The printer uses charging rollers in the electrophotographic process and therefore generates
no appreciable ozone gas (O
This HP LaserJet printer design reduces:
Energy consumption
Energy usage drops to as little as 6 W while in lo w-po wer (PowerSave) mode. Not only does
this save natural resources, but it also saves money without affecting the high performance
of this printer. This product qualifies for E
established to encourage the dev elopment of energ y-efficient office products. E
a U.S. registered service mark of the U.S. EPA.
).
3
NERGY STAR
. E
NERGY STAR
is a voluntary program
NERGY STAR
is
As an E
meets E
NERGY STAR
NERGY STAR
partner, Hewlett-Packard Company has determined that this product
Guidelines for energy efficiency.
Toner consumption
EconoMode uses significantly less toner, which may extend the life of the toner cartridge.
Paper use
Depending on the type of software program in use, y ou can request for a n umber of pages of
your document to be printed on one page of paper. This N-up printing practice and the
printer’s manual duplexing feature, which provides two-sided printing, can reduce paper
usage and the resulting demands on natural resources.
C4224-90962
Environmental Product Stewardship Program
9
The design of this HP LaserJet printer facilitates the recycling of:
Plastics
Plastic housing parts have markings according to international standards that enhance the
ability to identify plastics for recycling purposes at the end of the printer’s life.
HP LaserJet printing supplies
In many countries, this product's printing supplies (e.g., toner cartridge, drum, fuser) can be
returned to HP through the HP Planet Partners Printing Supplies Environmental Program.
An easy-to-use takeback component of the program is available in over 20 countries. Multilingual program information and instructions are included in every new HP LaserJet Toner
Cartridge and Consumables box.
HP Planet Partners printing supplies environmental program information
Since 1990, the HP LaserJet Toner Cartridge Recycling Program has collected more than
12 million used HP LaserJet toner cartridges that otherwise may hav e been discarded in the
world's landfills. The HP LaserJet toner cartridges go to a collection center and are bulk
shipped to our recycling partners who disassemble the cartridge parts for recycling. After a
thorough quality inspection, minor parts such as nuts, screws, and clips are reclaimed for
use in new cartridges. Remaining materials are separated and converted into raw materials
for use by other industries to make a variety of useful products. For more information in the
U.S., call 1-800-340-2445 or visit the HP LaserJet Supplies website at:
Asia Pacific: http://www.hp.com/sg/asiapacific/planp1.htm
U.S.: http//www.ljsupplies.com/planetpartners/
Europe: http://www.hp.com/pays/eur_supplies/english/planetpartners
Non-U.S. customers should call the local HP Sales and Service Office for further information
regarding availability of the HP Planet Partners LaserJet Toner Cartridge and Consumables
Recycling Program.
Paper
This printer is suited for the use of recycled papers when the paper meets the guidelines
outlined in the
and Ordering Information” in the
ordering information. This printer is suitable for the use of recycled paper according to DIN
19 309.
HP LaserJet Printer Family Paper Specifications Guide
HP LaserJet Printer Family Paper Specifications Guide
. See “Accessories
for
10 Chapter Printer Specifications
C4224-90962
Material safety data sheet
The Toner Cartridge/Drum MSDS can be obtained by contacting the HP LaserJet Supplies
website at http://www.ljsupplies.com/planetpartners/datasheets.html. If you do not have
access to the Internet, try calling the U.S. HP FIRST (fax-on-demand service) at 1-800231-9300. Use Index number 7 for a listing of the Toner Cartridge/Drum Material/Chemical
Safety Data Sheets. Non-US customers should refer to the front of this manual for
appropriate phone numbers and information.
C4224-90962
Material safety data sheet
11
Additional product stewardship
Environmental conformity
The design of this HP LaserJet printer facilitates the recycling of:
Printer and parts
Design for recycling has been incorporated into this printer and its accessories. The number
of materials has been kept to a minimum while ensuring proper functionality and high
product reliability . Dissimilar materials hav e been designed to separate easily. Fasteners and
other connections are easy to locate, access, and remove with common tools. High priority
parts have been designed to be accessed quickly for efficient disassembly and repair.
Plastic parts have been primarily designed in two colors to enhance recycling options. A few
small parts are colored specifically to highlight customer access points. The plastics used in
the printer housing and chassis are technically recyclable.
HP provides a product return system f or customers in Germany. Many of the functional parts
are recovered, tested, and reused as fully warranted service parts. Used parts are not
placed into new products. Remaining product parts are recycled, if possible. For product
return information, contact the address below:
Hewlett-Packard GmbH
Wertstoffzentrum
Fronackerstr.30
71063 Sindelfingen
To ensure longevity of your HP LaserJet printer, HP provides the
following:
Extended warranty
HP SupportPack provides coverage for the HP hardware product and all HP-supplied
internal components. The hardware maintenance warranty covers a three-year period from
date of the HP product purchase. The customer must purchase HP SupportPack within 90
days of the HP product purchase. Information on HP SupportPack is av ailable in a f ax fo rmat
by calling HP FIRST (Fax Information Retrieval Service Technology). The document number
is 9036. Customers can contact the nearest HP dealer about this service.
Spare parts and consumables availability
Spare parts and consumable supplies for this product will be made available for at least five
years after production has stopped.
12 Chapter Printer Specifications
C4224-90962
Regulatory statements
Declaration of Conformity
according to ISO/IEC Guide 22 and EN45014
Manufacturer's Name:
Manufacturer's Address:
declares that the product
Product Name:
Model Number:
Product Options:
conforms to the following Product Specifications:
Safety: IEC 950:1991+A1+A2+A3+A4 / EN 60950:1992+A1+A2+A3+A4
EMC:
Supplementary Information:
The product herewith complies with the requirements of the following Directives and carries the CEmarking accordingly:
the EMC directive 89/336/EEC
the Low-Voltage Directive 73/23/EEC
The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
For Compliance Information ONLY, contact:
Australia Contact: Product Regulations Manager, Hewlett-Packard
European Contact: Your Local Hewlett-Packard Sales and Service Office
USA Contact: Product Regulations Manager, Hewlett-Packard
Hewlett-Packard Company
11311 Chinden Boulevard
Boise, Idaho 83714-1021, USA
HP LaserJet 1100 Printer
C4224A
ALL
IEC 825-1:1993 / EN 60825-1:1994 Class 1 (Laser/LED)
CISPR 22:1993+A1 / EN 55022:1994 Class B
EN 50082-1:1992
IEC 801-2:1991 / prEN 55024-2:1992 - 4 kV CD, 8 kV AD
IEC 801-3:1984 / prEN 55024-3:1991 - 3 V/m
IEC 801-4:1988 / prEN 55024-4:1992 - 0.5 kV Signal Lines
IEC 1000-3-2:1995 / EN61000-3-2:1995
IEC 1000-3-3:1994 / EN61000-3.3:1995
FCC Title 47 CFR, Part 15 Class B2) / ICES-003, Issue 2 / VCCI-2
AS / NZS 3548:1992 / CISPR 22:1993 Class B
Australia Ltd., 31-41 Joseph Street, Blackburn,
Victoria 3130, Australia
or Hewlett-Packard GmbH, Department HQ-TRE /
Standards Europe, Herrenberger Straße 130, D71034 Böblingen (FAX: +49-7031-14-3143)
Company, PO Box 15 Mail Stop 160, Boise, ID
83707-0015 (Phone: 208-396-6000)
1
1.0 kV Power Lines
1)
1)
C4224-90962
Regulatory statements
13
Laser safety statement
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug
Administration has implemented regulations for laser products manuf actured since August 1,
1976. Compliance is mandatory for products marketed in the United States. The printer is
certified as a “Class 1” laser product under the U.S. Department of Health and Human
Services (DHHS) Radiation Performance Standard according to the Radiation Control for
Health and Safety Act of 1968.
Since radiation emitted inside the printer is completely confined within protective housings
and external covers, the laser beam cannot escape during any phase of normal user
operation.
WARNING! Using controls, making adjustments, or performing procedures other than those specified in
this user’s guide may result in exposure to hazardous radiation.
14 Chapter Printer Specifications
C4224-90962
Canadian DOC regulations
Complies with Canadian EMC Class B requirements.
«Conforme á la classe B des normes canadiennes de compatibilité électromagnétiques.
«CEM».»
Korean EMI statement
C4224-90962
Regulatory statements
15
Laser statement for Finland
LASERTURVALLISUUS
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
HP LaserJet 1100 Printer -laserkirjoitin on käyttäjän kannalta turvallinen luokan 1 laserlaite.
Normaalissa käytössä kirjoittimen suojakotelointi estää lasersäteen pääsyn laitteen
ulkopuolelle.
Laitteen turvallisuusluokka on määritetty standardin EN 60825-1 (1993) mukaisesti.
VAROITUS!
Laitteen käyttäminen muulla kuin käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän
turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.
VARNING!
Om apparaten används på annat sätt än i bruksanvisning specificerats, kan användaren
utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1.
HUOLTO
HP LaserJet 1100 Printer -kirjoittimen sisällä ei ole käyttäjän huollettavissa olevia kohteita.
Laitteen saa avata ja huoltaa ainoastaan sen huoltamiseen koulutettu henkilö. Tällaiseksi
huoltotoimenpiteeksi ei katsota väriainekasetin vaihtamista, paperiradan puhdistusta tai
muita käyttäjän käsikirjassa lueteltuja, käyttäjän tehtäväksi tarkoitettuja ylläpitotoimia, jotka
voidaan suorittaa ilman erikoistyökaluja.
VARO!
Mikäli kirjoittimen suojakotelo avataan, olet alttiina näkymättömälle lasersäteilylle laitteen
ollessa toiminnassa. Älä katso säteeseen.
VARNING!
Om laserprinterns skyddshölje öppnas då apparaten är i funktion, utsättas användaren för
osynlig laserstrålning. Betrakta ej strålen.
Tiedot laitteessa käytettävän laserdiodin säteilyominaisuuksista:
Aallonpituus 770-795 nm
Teho 5 mW
Luokan 3B laser
16 Chapter Printer Specifications
C4224-90962
Loading...