QuickSpecs
HP 5820 Switch Series
HP 5820 Switch Series
Models
HP 5820-14XG-SFP+ Switch with 2 Slots |
JC106A |
HP 5820X-24XG-SFP+ Switch |
JC102A |
HP 5820AF-24XG Switch |
JG219A |
|
|
Key features
For enterprise edge, or distribution/data center
Up to 24 ports of 10GbE per unit/194 per stack
Flex chassis—modular resiliency
Cut-through switching for very low latency
Hot-swappable I/O, power supplies, and fans
Product overview
The HP 5820 Switch Series supports advanced features that deliver a unique combination of unmatched 10 Gigabit Ethernet; Fibre Channel over Ethernet (FCoE) connectivity; high-availability architecture; full Layer 2/3 dual-stack IPv4/IPv6; and line-rate, lowlatency performance on all ports. Extensible embedded application capabilities enable these switches to integrate services into the network, consolidating devices and appliances to simplify deployment and reduce power consumption and rack space. Extremely versatile, the switches can be used in high-performance, high-density building or department cores as part of a consolidated network; for data center top-of-rack server access; or as high-performance Layer 3, 10GbE aggregation switches in campus and data center networks.
Features and benefits
Quality of Service (QoS)
Powerful QoS feature
creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, and DSCP or Type of Service (ToS) precedence; supports filter, redirect, mirror, or remark; supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), weighted deficit round robin (WDRR), and SP+WDRR
Integrated network services
with support for open application architecture (OAA) modules, extends and integrates application capability into the network
Ring Resiliency Protection Protocol (RRPP)
provides fast recovery for ring Ethernet-based topology; helps ensure consistent application performance for applications such as VoIP
Management
Remote configuration and management
is available through a secure Web browser or a command-line interface (CLI)
IEEE 802.1ab LLDP discovery
advertises and receives management information from adjacent devices on a network
USB support
oFile copy
allows users to copy switch files to and from a USB flash drive
DHCP options
provides server (RFC 2131), client, snooping, and relay options
SNMPv1, v2c, and v3
facilitate centralized discovery, monitoring, and secure management of networking devices
c04111589 — DA – 13791 Worldwide — Version 23 — July 3, 2014 |
Page 1 |
QuickSpecs
HP 5820 Switch Series
Overview
sFlow
provides scalable ASIC-based network monitoring and accounting; this allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and real-time network monitoring purposes
Network Time Protocol (NTP)
synchronizes timekeeping among distributed time servers and clients; keeps consistent timekeeping among all clockdependent devices within the network so that the devices can provide diverse applications based on the consistent time
Connectivity
High-density port connectivity
194 10-GbE ports with a 40 Gbps resilient backplane
Data center I/O consolidation
the 5820-14XG FCoE module supports two 4x8/4/2 Gbps FCoE modules (up to eight FC ports total) to reduce cost and complexity while boosting network performance
Auto-MDIX
provides automatic adjustments for straight-through or crossover cables on all 10/100 and 10/100/1000 ports
Jumbo frames
on Gigabit Ethernet and 10-Gigabit ports, jumbo frames allow high-performance remote backup and disaster-recovery services
IPv6 native support
o IPv6 host
enables switches to be managed and deployed at the IPv6 network's edge o Dual stack (IPv4/IPv6)
transitions from IPv4 to IPv6, supporting connectivity for both protocols o MLD snooping
forwards IPv6 multicast traffic to the appropriate interface
oIPv6 ACL/QoS
supports ACL and QoS for IPv6 network traffic, preventing traffic flooding
oIPv6 routing
supports IPv6 static routes and IPv6 versions of RIP, OSPF, IS-IS, and Border Gateway Protocol (BGP) routing protocols
Performance
Hardware-based wire-speed access control lists (ACLs)
helps provide high levels of security and ease of administration without impacting network performance with a featurerich
TCAM-based ACL implementation
Unique versatile architecture
supports the best of both fixed-port and modular configurations
Cut-through switching
delivers wire-speed, line-rate performance on all ports, as well as cut-through switching for low latency
Resiliency and high availability
Data center–optimized design
HP 5820AF-24XG Switch (JG219A) supports front-to-back/back-to-front airflow for hot/cold aisles, rear rack mounts, and redundant hot-swappable AC or DC power and fans
Manageability
Full-featured console
provides complete control of the switch with a familiar CLI
c04111589 — DA – 13791 Worldwide — Version 23 — July 3, 2014 |
Page 2 |
QuickSpecs
HP 5820 Switch Series
Overview
Web interface
allows configuration of the switch from any Web browser on the network
RMON and sFlow
provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
Multiple configuration files
allow multiple configuration files to be stored to a flash image
Troubleshooting
o Ingress and egress port monitoring enable network problem solving
o Traceroute and ping
enable testing of network connectivity
oVirtual cable tests
provide visibility to cable problems
Layer 2 switching
32K MAC addresses
provide access to many Layer 2 devices
4,094 port-based VLANs
provide security between workgroups
IEEE 802.1ad QinQ and Selective QinQ
increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a highspeed campus or metro network
Gigabit Ethernet port aggregation
allows grouping of ports to increase overall data throughput to a remote device
10 GbE port aggregation
allows grouping of ports to increase overall data throughput to a remote device
Spanning Tree/MSTP, RSTP, and STP Root Guard prevent network loops
sFlow
allows traffic sampling
GVRP VLAN Registration Protocol
allows automatic learning and dynamic assignment of VLANs
Layer 3 services
Address Resolution Protocol (ARP)
determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network
Dynamic Host Configuration Protocol (DHCP)
simplifies the management of large IP networks and supports client and server; DHCP Relay enables DHCP operation across subnets
Layer 3 routing
Layer 3 IPv4 routing
provides routing of IPv4 at media speed; supports static routes, RIP and RIPv2, OSPF, IS-IS, and BGP
Routing Information Protocol (RIP) and RIPng support provides complete support of RIP for both IPv4 and IPv6
OSPF and OSPFv3 support
provides complete support of OSPF for both IPv4 and IPv6
IS-IS and IS-ISv6 support
provides complete support of IS-IS for both IPv4 and IPv6
c04111589 — DA – 13791 Worldwide — Version 23 — July 3, 2014 |
Page 3 |
QuickSpecs
HP 5820 Switch Series
Overview
Layer 3 IPv6 routing
provides routing of IPv6 at media speed; supports static routes, RIPng, OSPFv3, IS-ISv6, and BGP4+
Bidirectional Forwarding Detection (BFD)
enables link connectivity monitoring and reduces network convergence time for RIP, OSPF, BGP, IS-IS, VRRP, MPLS, and IRF
Virtual Router Redundancy Protocol (VRRP) and VRRP Extended allow quick failover of router ports
Policy-based routing
makes routing decisions based on policies set by the network administrator
IGMPv1, v2, and v3
allow individual hosts to be registered on a particular VLAN
PIM-SSM, PIM-DM, and PIM-SM (for IPv4 and IPv6)
support IP Multicast address management and inhibition of DoS attacks
Equal-Cost Multipath (ECMP)
enables multiple equal-cost links in a routing environment to increase link redundancy and scale bandwidth
Security
Defense-in-depth security
provides integrated and distributed security enforcement that can be managed from a central location, such as the HP Intelligent Management Center (IMC)
Advanced processor queuing mechanism
helps prevent denial-of-service (DoS) attacks, while DHCP snooping helps ensure that devices can only receive an IP address from a legitimate DHCP server on the network
RADIUS/HWTACACS
eases switch management security administration by using a password authentication server
Secure Shell (SSHv2)
encrypts all transmitted data for secure, remote CLI access over IP networks
IEEE 802.1X-based dynamic delivery of QoS, ACLs, and VLANs allows complete control over user network access
Guest VLAN
provides a browser-based environment to authenticated clients, similar to IEEE 802.1X
Port isolation
secures and adds privacy, and prevents malicious attackers from obtaining user information
Port security
allows access only to specified MAC addresses, which can be learned or specified by the administrator
MAC-based authentication
allows or denies access to the switch based on a client MAC address
IP Source Guard
helps prevent IP spoofing attacks
HTTPS management
provides secure Web management
URPF
limits malicious traffic on a network
Multi-Customer Edge (MCE)-Multicast Virtual Routing and Forwarding (MVRF) provide MPLS Edge router support
Public Key Infrastructure (PKI) is used to control access
Convergence
Voice VLAN
automatically assigns VLAN and priority for IP phones, simplifying network configuration and maintenance
LLDP-MED
c04111589 — DA – 13791 Worldwide — Version 23 — July 3, 2014 |
Page 4 |
QuickSpecs
HP 5820 Switch Series
Overview
is a standard extension that automatically configures network devices, including LLDP-capable IP phones
Internet Group Management Protocol (IGMP)
utilizes Any-Source Multicast (ASM) or Source-Specific Multicast (SSM) to manage IPv4 multicast networks; supports IGMPv1, v2, and v3
Protocol Independent Multicast (PIM)
defines modes of Internet multicasting to allow one-to-many and many-to-many transmission of information; PIM Dense Mode (DM), Sparse Mode (SM), and Source-Specific Mode (SSM) are support
Monitor and diagnostics
Port mirroring
enables traffic on a port to be simultaneously sent to a network analyzer for monitoring
OAM (802.3ah)
operations, administration and maintenance (OAM) management capability detects data link layer problems that occurred in the "last mile"; monitors the status of the link between the two devices
CFD (802.1ag)
connectivity fault detection (CFD) provides a Layer 2 link OAM (operations, administration, and maintenance) mechanism used for link connectivity detection and fault locatin
Additional information
Intelligent Resilient Framework (IRF)
oCreates virtual resilient switching fabrics, where two or more switches perform as a single Layer 2 switch and Layer 3 router
o Does not require switches to be co-located and allows them to be part of a disaster-recovery system
o Allows servers or switches to be attached using standard LACP for automatic load balancing and high availability
oSimplifies network operation by eliminating the complexity of Spanning Tree Protocol, ECMP, or VRRP
OAA modules
support wireless network management and high-performance security applications; leverage network infrastructure investment
Green IT and power
improves energy efficiency through the use of the latest advances in silicon development; shuts off unused ports and utilizes variable-speed fans, reducing energy costs
High scalability with IRF
HP Intelligent Resilient Framework (IRF) technology simplifies the architecture of server access networks; up to nine HP 5820/5820AF stackable switches can be combined to deliver unmatched scalability of virtualized access layer switches and flatter, two-tier FlexFabric networks using IRF, which reduces cost and complexity
Warranty and support
1-year warranty
with advance replacement and 10-calendar-day delivery (available in most countries)
Electronic and telephone support
limited electronic and telephone support is available from HP; to reach our support centers, refer to www.hp.com/networking/contact-support; for details on the duration of support provided with your product purchase, refer to
www.hp.com/networking/warrantysummary
Software releases
to find software for your product, refer to www.hp.com/networking/support; for details on the software releases available with your product purchase, refer to www.hp.com/networking/warrantysummary
c04111589 — DA – 13791 Worldwide — Version 23 — July 3, 2014 |
Page 5 |
QuickSpecs
HP 5820 Switch Series
Build To Order: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or RackShippable solution.
Standard Switch Chassis |
|
|
HP 5820-14XG-SFP+ Switch with 2 Slots |
JC106A |
|
4 RJ-45 autosensing 10/100/1000 ports |
See |
|
|
2 module slots |
Configuration |
|
14 fixed 1000/10000 SFP+ ports |
Note:1 |
min=0 \ max=14 SFP+ Transceivers
1 Power Supply Required
2U - Height
HP 5820-24XG-SFP+ Switch |
JC102A |
|
4 RJ-45 autosensing 10/100/1000 ports |
See |
|
|
24 fixed 1000/10000 SFP+ ports |
Configuration |
|
min=0 \ max=24 SFP+ Transceivers |
Note:1 |
1 Power Supply Required
1U - Height
HP 5820AF-24XG Switch |
JG219A |
|
4 RJ-45 autosensing 10/100/1000 ports |
See |
|
|
24 fixed 1000/10000 SFP+ ports |
Configuration |
|
min=0 \ max=24 SFP+ Transceivers |
Note:1 |
1 Power Supply Required
2 Fan Trays Required
1U - Height
Configuration Rules: |
|
|
Note 1 |
The following Transceivers install into this Switch (Max = 14 or 24 depending on Switch) (Use #0D1 or #B01 if switch |
|
|
is CTO): |
|
|
HP X130 10G SFP+ LC SR Transceiver |
JD092B |
|
HP X130 10G SFP+ LC LRM Transceiver |
JD093B |
|
HP X130 10G SFP+ LC LR Transceiver |
JD094B |
|
HP X130 10G SFP+ LC ER 40km Transceiver |
JG234A |
|
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable |
JD095C |
|
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable |
JD096C |
|
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable |
JD097C |
|
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable |
JG081C |
|
HP X125 1G SFP LC LH40 1310nm Transceiver |
JD061A |
|
HP X120 1G SFP LC LH40 1550nm Transceiver |
JD062A |
|
HP X125 1G SFP LC LH70 Transceiver |
JD063B |
|
HP X120 1G SFP LC SX Transceiver |
JD118B |
|
HP X120 1G SFP LC LX Transceiver |
JD119B |
|
HP X120 1G SFP RJ45 T Transceiver |
JD089B |
|
|
|
|
c04111589 — DA – 13791 Worldwide — Version 23 — July 3, 2014 |
Page 6 |
QuickSpecs
HP 5820 Switch Series
Configuration
Box Level Integration CTO Models
CTO Solution Sku |
|
|
HP 58xx CTO Switch Solution |
JG478A |
|
|
SSP trigger sku |
|
CTO Base Sku |
|
|
HP 5820-14XG-SFP+ w/2 Slots CTO Switch |
JC106AC |
|
4 RJ-45 autosensing 10/100/1000 ports |
See |
|
|
2 module slots |
Configuration |
14 fixed 1000/10000 SFP+ ports |
Note:1,4 |
min=0 \ max=14 SFP+ Transceivers
1 Power Supply Required
2U - Height
HP 5820-24XG-SFP+ CTO Switch |
JC102AC |
|
4 RJ-45 autosensing 10/100/1000 ports |
See |
|
|
24 fixed 1000/10000 SFP+ ports |
Configuration |
|
min=0 \ max=24 SFP+ Transceivers |
Note:1,4 |
1 Power Supply Required
1U - Height
HP 5820AF-24XG Switch |
JG219A |
|
4 RJ-45 autosensing 10/100/1000 ports |
See |
|
|
24 fixed 1000/10000 SFP+ ports (min=0 \ max=24 SFP+ Transceivers) |
Configuration |
|
1 Power Supply Required |
Note:1, 4 |
2 Fan Trays Required
1U - Height
Configuration Rules: |
|
|
|
Note 1 |
The following Transceivers install into this Switch (Max = 14 or 24 depending on Switch): (Use #0D1 if switch is CTO) |
||
|
HP X130 10G SFP+ LC SR Transceiver |
JD092B |
|
|
HP X130 10G SFP+ LC LRM Transceiver |
JD093B |
|
|
HP X130 10G SFP+ LC LR Transceiver |
JD094B |
|
|
HP X130 10G SFP+ LC ER 40km Transceiver |
JG234A |
|
|
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable |
JD095C |
|
|
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable |
JD096C |
|
|
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable |
JD097C |
|
|
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable |
JG081C |
|
|
HP X125 |
1G SFP LC LH40 1310nm Transceiver |
JD061A |
|
HP X120 |
1G SFP LC LH40 1550nm Transceiver |
JD062A |
|
HP X125 |
1G SFP LC LH70 Transceiver |
JD063B |
|
|
|
|
|
|
c04111589 — DA – 13791 Worldwide — Version 23 — July 3, 2014 |
Page 7 |
QuickSpecs
HP 5820 Switch Series
Configuration
|
HP X120 1G SFP LC SX Transceiver |
JD118B |
|
HP X120 1G SFP LC LX Transceiver |
JD119B |
|
HP X120 1G SFP RJ45 T Transceiver |
JD089B |
Note 4 |
If the Switch Chassis is to be Box Level Factory Integrated (CTO), Then the #0D1 is required on the Switch Chassis and |
|
|
integrated to the JG478A - HP 58xx CTO Enablement. (Max 1 switch per SSP) |
|
Rack Level Integration CTO Models
Standard Switch Chassis
HP 5820-14XG-SFP+ Switch with 2 Slots
4 RJ-45 autosensing 10/100/1000 ports
2 module slots
14 fixed 1000/10000 SFP+ ports
min=0 \ max=14 SFP+ Transceivers
1 Power Supply Required
2U - Height
JC106A
See
Configuration
Note:1, 11
HP 5820-24XG-SFP+ Switch
4 RJ-45 autosensing 10/100/1000 ports
24 fixed 1000/10000 SFP+ ports
min=0 \ max=24 SFP+ Transceivers
1 Power Supply Required
1U - Height
HP 5820AF-24XG Switch
4 RJ-45 autosensing 10/100/1000 ports
24 fixed 1000/10000 SFP+ ports (min=0 \ max=24 SFP+ Transceivers)
1 Power Supply Required
2 Fan Trays Required
1U - Height
Configuration Rules:
JC102A
See
Configuration
Note:1, 11
JG219A
See
Configuration
Note:1, 4, 11
Note 1 |
The following Transceivers install into this Switch (Max = 14 or 24 depending on Switch): |
|
|
|
HP X130 10G SFP+ LC SR Transceiver |
JD092B |
|
|
HP X130 10G SFP+ LC LRM Transceiver |
JD093B |
|
|
HP X130 10G SFP+ LC LR Transceiver |
JD094B |
|
|
HP X130 10G SFP+ LC ER 40km Transceiver |
JG234A |
|
|
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable |
JD095C |
|
|
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable |
JD096C |
|
|
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable |
JD097C |
|
|
HP X240 |
10G SFP+ to SFP+ 5m Direct Attach Copper Cable |
JG081C |
|
HP X125 |
1G SFP LC LH40 1310nm Transceiver |
JD061A |
|
HP X120 |
1G SFP LC LH40 1550nm Transceiver |
JD062A |
|
HP X125 |
1G SFP LC LH70 Transceiver |
JD063B |
|
|
|
|
|
|
c04111589 — DA – 13791 Worldwide — Version 23 — July 3, 2014 |
Page 8 |
QuickSpecs
HP 5820 Switch Series
Configuration
|
HP X120 1G SFP LC SX Transceiver |
JD118B |
|
HP X120 1G SFP LC LX Transceiver |
JD119B |
|
HP X120 1G SFP RJ45 T Transceiver |
JD089B |
Note 4 |
Switch Height is 2U if the JC682A - HP A58x0AF Bck(pwr)-Frt(ports) Fan Tray is ordered #0D1 with this switch. |
|
|
REMARK: This only applies for CTO Rack Level Integration. |
|
Note 11 |
If HP CTO Switch Chassis is selected for Rack Level Integration, Then the Switch needs to integrate (with #0D1) to the |
|
|
HP Rack. |
|
Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.
Modules
Ethernet Modules |
|
|
(JC106x and JG259x Switch Only ) System (std 0 // max 2) User Selection (min 0 // max 2) per chassis |
|
|
HP 5800 4-port 10GbE SFP+ Module |
JC091A |
|
min=0 \ max=4 SFP + Transceivers |
See |
|
|
|
Configuration |
|
|
Note:1 |
HP 5800 2-port 10GbE SFP+ Module |
JC092B |
|
min=0 \ max=2 SFP + Transceivers |
See |
|
|
|
Configuration |
|
|
Note:1 |
HP 5820 4-port 8/4/2 Gbps FCoE SFP+ Mod |
JC530A |
|
min=0 \ max=4 SFP + Transceivers |
See |
|
|
|
Configuration |
|
|
Note:1 |
Configuration Rules: |
|
|
Note 1 |
The following Transceivers install into this Module: (Use #0D1 or #B01 if switch is CTO) |
|
|
HP X130 10G SFP+ LC SR Transceiver |
JD092B |
|
HP X130 10G SFP+ LC LRM Transceiver |
JD093B |
|
HP X130 10G SFP+ LC LR Transceiver |
JD094B |
|
HP X130 10G SFP+ LC ER 40km Transceiver |
JG234A |
|
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable |
JD095C |
|
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable |
JD096C |
|
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable |
JD097C |
|
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable |
JG081C |
Access Control Modules |
|
|
(JC106x and JG259x Switch Only ) System (std 0 // max 1) User Selection (min 0 // max 1) per chassis |
|
|
HP A5800 Access Controller Module for 32-64 Aps |
JD443A |
|
|
|
|
|
c04111589 — DA – 13791 Worldwide — Version 23 — July 3, 2014 |
Page 9 |
QuickSpecs
HP 5820 Switch Series
Configuration
No Transceivers
HP 5820 VPN Firewall Module |
JD255A |
No Transceivers |
|
Configuration Rules:
Note 1 |
This Module install to the following switches only: |
|
|
JC106x - HP 5820-14XG-SFP+ Switch with 2 Slots |
|
Transceivers |
|
|
SFP+ Transceivers |
|
|
HP X130 10G SFP+ LC SR Transceiver |
JD092B |
|
HP X130 10G SFP+ LC LRM Transceiver |
JD093B |
|
HP X130 10G SFP+ LC LR Transceiver |
JD094B |
|
HP X130 10G SFP+ LC ER 40km Transceiver |
JG234A |
|
HP X240 10G SFP+ SFP+ 0.65m DAC Cable |
JD095C#B01 |
|
HP X240 10G SFP+ SFP+ 1.2m DAC Cable |
JD096C#B01 |
|
HP X240 10G SFP+ SFP+ 3m DAC Cable |
JD097C#B01 |
|
HP X240 10G SFP+ SFP+ 5m DAC Cable |
JG081C#B01 |
|
SFP Transceivers |
|
|
HP X125 1G SFP LC LH40 1310nm XCVR |
JD061A |
|
HP X120 1G SFP LC LH40 1550nm XCVR |
JD062A |
|
HP X120 1G SFP LC SX Transceiver |
JD118B |
|
HP X120 1G SFP LC LX Transceiver |
JD119B |
|
HP X125 1G SFP LC LH70 Transceiver |
JD063B |
|
HP X120 1G SFP RJ45 T Transceiver |
JD089B |
|
Internal Power Supplies |
|
|
System (std 0 // max 2) User Selection (min 1 // max 2) per switch enclosure |
|
|
HP A5800 300W DC Power Supply |
JC090A |
|
|
|
See |
|
|
Configuration |
|
|
Note:1, 2 |
HP A5800 300W AC Power Supply |
JC087A |
|
includes 1 x c13, 300w |
See |
|
|
|
Configuration |
|
|
Note:1, 2, 3 |
PDU Cable NA/MEX/TW/JP |
JC087A#B2B |
|
|
|
|
|
c04111589 — DA – 13791 Worldwide — Version 23 — July 3, 2014 |
Page 10 |
QuickSpecs
HP 5820 Switch Series
Configuration
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW |
JC087A#B2C |
C15 PDU Jumper Cord (ROW)
HP A58x0AF 650W AC Power Supply |
JC680A |
includes 1 x c13, 650w |
See |
|
Configuration |
|
Note:1, 3, 5 |
PDU Cable NA/MEX/TW/JP |
JC680A#B2B |
C15 PDU Jumper Cord (NA/MEX/TW/JP)
PDU Cable ROW |
JC680A#B2C |
C15 PDU Jumper Cord (ROW)
HP 58x0AF 650W DC Power Supply |
JC681A |
|
|
|
See |
|
|
Configuration |
|
|
Note:1, 5 |
Configuration Rules: |
|
|
Note 1 |
If 2 power supplies are selected they must be the same Sku number. |
|
Note 2 |
Supported only on the JC102x, JC106x, JG243x, and JG259x Switches |
|
Note 3 |
Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) . (See |
|
|
Localization Menu) |
|
|
REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the Defaulted |
|
|
Power Cable option on the Switches/Routers. |
|
Note 5 |
Supported only on the JG219A Switch |
|
Remarks: |
|
|
Drop down under power supply should offer the following options and results: Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level CTO)
Switch Options
Fan Trays
(JG219A only) System (std 0 // max 2) User Selection (min 2 // max 2) per switch
c04111589 — DA – 13791 Worldwide — Version 23 — July 3, 2014 |
Page 11 |
QuickSpecs
HP 5820 Switch Series
Configuration
HP 58x0AF Bck(pwr)-Frt(ports) Fan Tray |
JC682A |
|
|
|
See |
|
|
Configuration |
|
|
Note:1 |
HP 58x0AF Frt(ports)-Bck(pwr) Fan Tray |
JC683A |
|
|
|
See |
|
|
Configuration |
|
|
Note:1 |
Configuration Rules: |
|
|
Note 1 |
Fan Trays cannot be mixed in the same switch enclosure |
|
Remarks: |
Watson Blue Text: |
|
|
If there is any empty space below the switch in a rack when using Back to Front Fan Trays, JC682A, the |
|
|
rack will receive an Air Plenum kit that takes up 1U of additional space in the rack. The Air Plenum kit |
|
|
is not required on fully configured racks. This only applies for CTO Rack Level Integration. The Air |
|
Plenum Kit is a non-saleable SKU, and is brought in automatically for CTO Factory Rack Level
Integration.
c04111589 — DA – 13791 Worldwide — Version 23 — July 3, 2014 |
Page 12 |