HP 9000 800t System Installation Manual

Central Office
HP 9000 Series 800t

Addendum to

D Class Enterprise Servers

System Installation Guide

The information contained in this document is subject to change without notice.
HEWLETT-PACKARD MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THE MATE-

RIAL, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABIL­ITY AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for errors
contained herein or for incidental or consequential damages in connection with the furnishing, performance,
or use of this material.

Hewlett-Packard assumes no responsibility for the use or reliability of its software on equipment that is not
furnished by Hewlett-Packard.

This document contains proprietary information which is protected by copyright. All rights are reserved. No
part of this document may be photocopied, reproduced, or translated to another language without the prior
written consent of Hewlett-Packard Company.

Copyright © 1997 and 1998 by HEWLETT-PACKARD COMPANY

Printing History

Printing History

The Printing History below identifies the edition of this manual and any up­dates that are included. Periodically, update packages are distributed which
contain replacement pages to be merged into the manual, including an updat­ed copy of this printing history page. Also, the update may contain write-in
instructions.

Each reprinting of this manual will incorporate all past updates; however, no
new information will be added. Thus, the reprinted copy will be identical in
content to prior printings of the same edition with its user-inserted update in­formation. New editions of this manual will contain new information, as well
as all updates.

First Edition. . . . . . . . . . May 1997 . . . . . . . . . . .

Second Edition. . . . . . . . May 1998 . . . . . . . . . . .

ii

Preface

Preface

The HP 9000 family of products embraces the D Class Enterprise Server line
which includes Series 800t, a NEBS-compatible version. This document ex­plains how to install the seismic rack and DC power supply which provide
NEBS compatibility for the system.

iii

Preface

iv

Contents

Addendum to D Class Enterprise Servers System Installation Guide

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2

Purpose of this Addendum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3

Tools Needed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3

Seismic Rack Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-4

Site Hazard Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-5

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-7

DC Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-14

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-14

Safety Grounding Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . 1-16

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-17

A Regulatory/Safety Statements

FCC Statement (USA Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

IEC Statement (Worldwide) . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

International . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

VCCI Statement (Japan Only) . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

Spécification ATI Classe A (France seulement) . . . . . . . . . . . . A-3

Product Noise Declaration (Germany Only . . . . . . . . . . . . . . . A-4

EMC Regulatory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

EMC Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

EMC Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

Safety Certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

Safety Labels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

v

Contents

vi

Addendum to D Class Enterprise
Servers System Installation Guide

1

Addendum to D Class Enterprise Servers System Installation Guide

Contents

Contents

• Purpose of this Addendum

• Seismic Rack Kit for Series 800t

• DC Power to a Series 800t

2