HP 732352-B21 Product Data Sheet

Download

Page 1

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Overview

Page 1

HPE Synergy 480 Gen9 Compute Module

HPE Synergy 480 Gen9 Compute Module – Internal View

Removable drive cage with two hot-plug drive bays

Mezzanine connectors (x16 PCIe 3.0)

TPM connector (under drive cage)

HPE Smart Storage Battery connector

USB 3.0 (under drive cage)

iLO (under drive cage)

Twenty four (24) DDR4 DIMM memory slots (12 per processor)

MicroSD Slot (under drive cage)

Up to two (2) Intel Xeon E5-2600 v4 processors

10.

Storage controller connector (under drive cage)

HPE Synergy, the first platform built from the ground up for Composable Infrastructure, offers an experience that empowers IT to create and deliver new value instantly and continuously. It is a single infrastructure that reduces operational complexity for traditional workloads and increases operational velocity for the new breed of applications and services. Through a single interface, HPE Synergy composes physical and virtual compute, storage, and fabric pools into any configuration for a platform, it easily enables a broad range of applications and operational models such as virtualization, hybrid cloud, and De With HPE Synergy, IT can become not just the internal service provider but the business part that become the business.

HPE Synergy supports both two optimization, storage simplicity, and configuration flexibility to po infrastructure, web infrastructure, collaborative, and high

The HPE Synergy 480 Gen9 Compute Module delivers superior capacity, efficiency, and flexibility in a two-socket, half-height form

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

ny application. As an extensible

ner to rapidly launch new applications

-socket and four-socket compute modules which provide the performance, scalability, density wer a variety of workloads, including business processing, IT

-performance computing.

vOps.

Page 2

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Overview

Page 2

factor to support demanding workloads. Powered by Intel's® latest E5-2600 v4 processors, HPE DDR4 SmartMemory supporting up to 1.5 TB, flexible storage controller options, three I/O connectors, and designed to create a pool of flexible a composable infrastructure the HPE Synergy 480 Gen9 Compute Module is the ideal platform for general workload performance now and in the future.

HPE Synergy offers additional compute module options (that have in

This QuickSpecs document focuses on the HPE Synergy 480 Gen9 Compute Module.

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

compute capacity within

-purpose enterprise

dividual QuickSpecs) including:

• HPE Synergy 620 Gen9 (2-socket, mission critical)

• HPE Synergy 660 Gen9 (2-4-socket, general purpose)

• HPE Synergy 680 Gen9 (4-socket, mission critical)

Page 3

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Standard Features

Page 3

NOTE: This document covers the HPE Synergy 480 Gen9 Compute Module only. For information on HPE Synergy 12000 Frame

NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory

Processor

HPE Synergy 480 Gen9 Intel Xeon E5-2699 v4 (2.2GHz/22-core/55MB/145W)

HPE Synergy 480 Gen9 Intel Xeon E5-2698 v4 (2.2GHz/20-core/50MB/135W)

HPE Synergy 480 Gen9 Intel Xeon E5-2697 v4 (2.3GHz/18-core/45MB/145W)

HPE Synergy 480 Gen9 Intel Xeon E5-2697A v4 (2.6GHz/16-core/40MB/145W)

HPE Synergy 480 Gen9 Intel Xeon E5-2695 v4 (2.1GHz/18-core/45MB/120W)

HPE Synergy 480 Gen9 Intel Xeon E5-2690 v4 (2.6GHz/14-core/35MB/135W)

HPE Synergy 480 Gen9 Intel Xeon E5-2683 v4 (2.1GHz/16-core/40MB/120W)

HPE Synergy 480 Gen9 Intel Xeon E5-2680 v4 (2.4GHz/14-core/35MB/120W)

HPE Synergy 480 Gen9 Intel Xeon E5-2667 v4 (3.2GHz/8-core/25MB/135W)

HPE Synergy 480 Gen9 Intel Xeon E5-2660 v4 (2.0GHz/14-core/35MB/105W)

HPE Synergy 480 Gen9 Intel Xeon E5-2650 v4 (2.2GHz/12-core/30MB/105W)

HPE Synergy 480 Gen9 Intel Xeon E5-2650L v4 (1.7GHz/14-core/35MB/65W)

HPE Synergy 480 Gen9 Intel Xeon E5-2643 v4 (3.4GHz/6-core/20MB/135W)

HPE Synergy 480 Gen9 Intel Xeon E5-2640 v4 (2.4GHz/10-core/25MB/90W)

HPE Synergy 480 Gen9 Intel Xeon E5-2637 v4 (3.5GHz/4-core/15MB/135W)

HPE Synergy 480 Gen9 Intel Xeon E5-2630 v4 (2.2GHz/10-core/25MB/85W)

HPE Synergy 480 Gen9 Intel Xeon E5-2630L v4 (1.8GHz/10-core/25MB/55W)

HPE Synergy 480 Gen9 Intel Xeon E5-2623 v4 (2.6GHz/4-core/10MB/85W)

HPE Synergy 480 Gen9 Intel Xeon E5-2620 v4 (2.1GHz/8-core/20MB/85W)

HPE Synergy 480 Gen9 Intel Xeon E5-2609 v4 (1.7GHz/8-core/20MB/85W)

HPE Synergy 480 Gen9 Intel Xeon E5-2603 v4 (1.7GHz/6-core/15MB/85W)

NOTE: All processors within the compute module must be identical.

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

and interconnects please see the HPE Synergy 12000 Frame QuickSpecs.

https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=c04815113

Integrated Models" section.

Up to two of the following

NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology. NOTE: Turbo indicates the maximum potential frequency when using Intel® Turbo Boost Technology. The

frequency boost increment is dependent on the processor SKU and the number of active cores. In general, a higher boost increment is obtained when fewer cores are active. NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.

NOTE: Supports 1 or 2 processors. Mixing different processor models is not supported. NOTE: For the Intel® C610 Chipset E5-2600 v4 Series, the letter preceding the model number indicates the

Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a module, 6 is socket/segment designation, 00 = Processor SKU, and x = L for low power SKUs. NOTE: The HPE Synergy 480 Gen9 Compute Module includes three I/O mezzanine connectors. A processor must be installed in processor slot 1 for access to mezzanine connector one and three (mezzanine connectors 1 and 3). A processor must be installed in processor slot 2 for access to the mezzanine connector two (mezzanine connector 2). NOTE: The processor model as well as the memory configuration determines the maximum speed memory can operate. Please see the see the "Memory" section later in this document.

Page 4

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Standard Features

Page 4

Cache Memory

55MB (1x55MB) L3 cache

NOTE: For Twenty-two-core processors.

50MB (1x50MB) L3 cache

NOTE: For Twenty-core processors.

45MB (1x45MB) L3 cache

NOTE: For Eighteen-core processors.

40MB (1x40MB) L3 cache

NOTE:

35MB (1x35MB) L3 cache

NOTE: For Fourteen-core processors.

30MB (1x30MB) L3 cache

NOTE: For Twelve-core processors.

25MB (1x25MB) L3 cache

NOTE:

20MB (1x20MB) L3 cache

NOTE: For Six, Eight, or Ten-core processors

15MB (1x15MB) L3 cache

NOTE: For Quad or Six-core processors

10MB (1x10MB) L3 cache

Chipset

Intel® C610 Series Chipset

NOTE: For more information regarding Intel chipsets, please see the following:

On System

HPE iLO (Firmware HPE iLO4 2.0), 4GB NAND with 1GB USB user space configurable via UEFI and accessible

iLO QuickSpecs.

NOTE:

http://www.hpe.com/info/ilo

Memory

Advanced ECC

Memory Mirroring

Memory Online Spare Mode (Rank Spare Mode)

Memory

Type

HPE SmartMemory

DDR4 Load Reduced (LRDIMM), or Registered (RDIMM)

DIMM Slots Available

24 (12 DIMM slots per processor, 4 channels per processor, 3 DIMMs per channel)

Maximum (LRDIMM)

1.5 Tb (24 x 64 Gb)

Maximum (RDIMM)

768 Gb (24 x 32 Gb)

NOTE:

module.

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

One of the following depending on Model

For Sixteen-core processors.

For Eight or Ten-core processors.

NOTE: For Quad-core processors

Management Chipset

Protection

One of the following depending on Model

http://www.intel.com/products/server/chipsets/.

via iLO. Read and learn more in the

For more information, visit:

HPE memory from previous generation servers (DDR3) is not compatible with this compute module. HPE SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen9. For additional information, please see the HPE SmartMemory QuickSpecs at:

https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111535

NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within a compute

Page 5

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Standard Features

Page 5

Network

HPE Synergy 3820C 10/20 Gb Converged Network Adapter

Ethernet data and storage networks.

HPE Synergy 2820C 10/20 Gb Converged Network Adapter

each connection.

Standard iLO Network Controller:

Mezzanine

Three (3) I/O expansion mezzanine connectors:

HPE Compute

HPE ROM (read only memory) is now digitally signed using the HPE Corporate Signing Service. This signature

f initialization progress

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

Controller

connectors

NOTE: Supports full hardware offload of FCoE storage protocol processing for high performance converged

NOTE: Delivers flexibility to compose multiple network flows including Ethernet and FCoE or iSCSI within

One (1) 1 Gb/s port for the HPE iLO 4 to HPE Frame Link Module connection.

• x16 PCIe 3.0 Type D (supports Type C and Type D mezzanine cards) (mezzanine connector 1).

NOTE: This mezzanine connector supports dual-port mezzanine cards: one port is routed to interconnect module bay 1 and the other to bay 4.

• x16 PCIe 3.0 Type D (supports Type C and Type D mezzanine cards (mezzanine connector 2).

NOTE: This mezzanine connector supports dual-port mezzanine cards: one port is routed to interconnect module bay 2 and the other to bay 5. NOTE: A second processor must be installed (in processor slot 2) to have access to mezzanine connector 2.

• x16 PCIe 3.0 Type C (supports Type C mezzanine cards) (mezzanine connector 3).

NOTE: This mezzanine connector supports dual-port mezzanine cards: one port is routed to interconnect module bay 3 and the other to bay 6.

Mezzanine options include:

• Dual-port 10/20 Gb compute module mezzanine adapter options for additional network ports.

• Dual-port 16 Gb Fibre Channel HBA options for SAN connectivity.

Module ROM

is verified before the flash process starts, reducing accidental programming and preventing malicious efforts to corrupt system ROM.

HPE ROM provides for essential initialization and validation of hardware components before control is passed to the customer-installed operating system. The ROM also provides the capability of booting from various fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating system.

HPE ROM performs very early configuration of the video controller, to allow monitoring o via an attached monitor. If configuration or hardware errors are discovered during this early phase of hardware initialization, suitable messages are now displayed on the connected monitor. Additionally, these configuration or hardware errors are logged to the Integrated Management Log (IML) to assist in diagnosis.

HPE Synergy Compute ROM is used to configure the following:

• Processor and chipset status registers

• System memory, memory map, and memory initialization

• System hardware configuration (integrated PCI devices and optional PCIe cards).

• Customer-specific BIOS configuration using the UEFI System Utilities.

NOTE: For further information, please refer to the RBSU and UEFI System Utilities User Guide:

http://www.hpe.com/support/UEFIGen9_UG_en http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=c04398276

Page 6

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Standard Features

Page 6

Unified Extensible

re Interface

HPE Synergy Compute Module System BIOS is an EDK2 UEFI solution, and adheres to the latest revisions of

For UEFI boot operation, boot environment and OS image installations should be configured properly

Storage Controller

Choice of:

Backed Write Cache (FBWC) supporting RAID 0, 1,

Maximum Internal

Hot Plug SFF SAS

4.0 Tb

2 x 2.0 Tb

Hot Plug SFF SATA

4.0 Tb

2 x 2.0 Tb

Hot Plug SFF SAS SSD

7.68 Tb

2 x 3.84 Tb Hot Plug SFF SATA SSD

3.2 Tb

2 x 1.6 Tb

Hot Plug SFF NVMe SSD

4.0 Tb NVMe

2 x 2.0 Tb NVMe

Hot Plug uFF SATA SSD

1.36 Tb

4 x 340 Gb

NOTE: The HPE Synergy 480 Gen9 Compute Module supports the HPE hot plug small form factor (SFF)

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

Firmwa (UEFI) or Legacy Model

UEFI Class 2 specifications which supports both legacy boot and UEFI boot operation. The HPE Synergy 480 Gen9 defaults to UEFI boot operation and can be factory or field configured for Legacy boot operation.

NOTE:

to support UEFI. NOTE: For more information on Hewlett Packard Enterprise Synergy Compute Module System BIOS and UEFI, see the UEFI Information Library: http://www.hpe.com/info/uefi/docs

. NOTE: HPE Legacy FIO Mode Setting (758959-B22) can be selected to configure the system in UEFI mode in the factory.

To modify the compute module configuration ROM default settings, press F9 in the HPE Synergy Compute Module POST screen to enter the UEFI System Utilities screen. By default, the System Utilities menus are in the English language.

UEFI enables numerous new capabilities, including both industry standard functionality and features specific to HPE Synergy Compute Modules. Following are some of the features that UEFI enables and that the HPE Synergy 480 Gen9 can support when configured for UEFI boot operation:

• Secure Boot - A new feature in which the system firmware, option card firmware, operating systems,

and software collaborate to greatly enhance platform security.

• Operating system specific functionality - Microsoft Windows 2012 supports several features only when

installed in UEFI mode.

• Support for > 2.2 TB (using GPT) boot drives - Such drives could previously only be used for boot

drives when using RAID solutions such as HPE Smart Array.

• UEFI Shell - Provides a pre-boot environment for running scripts and tools. The HPE Synergy Compute

Module UEFI Shell provides both standard capabilities as well as numerous enhancements.

• PXE boot support for IPv6 networks.

• PXE Multicast Boot allowing for faster PXE deployments for large numbers of servers.

• Boot support for option cards that only support a UEFI option ROM.

NOTE: When the server is configured for UEFI Boot Mode, PXE servers must be configured with a UEFI boot image. NOTE: When the server boots in UEFI mode, it does not boot media with a legacy OS installation. This includes DOS targets and Windows or Linux systems installed in Legacy mode. The reverse is also true for servers that boot in Legacy mode.

• HPE Smart Array P240nr Controller with 1 Gb Flash-Backed Write Cache (FBWC) supporting RAID 0,

1, 10, 5, 6, and 1 ADM

• HPE Smart Array P542D Controller with 2 Gb Flash-

10, 5, 50, 6, 60, 1 ADM, and 10 ADM

• HPE H240nr Smart HBA supporting RAID 0, 1, 10, 5

• HPE B140i (chipset SATA)

Storage

One of the following depending on Model

Page 7

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Standard Features

Page 7

SmartDrive carrier for enhanced management and reduced maintenance errors. HPE drives from previous

Interfaces

Micro SDHC Slot

One (1) internal Micro Secure Digital High Capacity (Micro SDHC) card slot

USB 3.0 Port

One (1) internal USB 3.0 connector for USB flash media drive keys

NOTE: The above options are intended for integrated hypervisor virtualization environments.

USB 3.0 Port

One (1) external USB 3.0 connector for USB flash media drive keys

Industry Standard

ACPI 2.0

Operating Systems

•

Enclosures

HPE Synergy 12000 Frame, is the base for all Synergy products and supports:

Graphics

Integrated Matrox G200eh video controller

• 1920 x 1200 (16 bpp)

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

generation servers (prior to Gen8) are not compatible with the HPE Synergy 480 Gen9 drive bays.

Compliance

and Virtualization Software Support for HPE 480 Synergy Compute Module

Microsoft® Logo certifications USB 3.0 Support IPMI 2.0 Secure Digital 2.0 TPM 1.2 and 2.0 Support IEEE (specific IEEE standards depending on Ethernet adapter card(s) installed) Advanced Encryption Standard (AES) Triple Data Encryption Standard (3DES) SNMP SSL 2.0 DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH CLP) Active Directory v1.0 PCIe 3.0 ASHRAE A3

Microsoft Windows Server

• Microsoft Hyper-V Server

• Red Hat Enterprise Linux (RHEL)

• SUSE Linux Enterprise Server (SLES)

• VMware ESXi

https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=c04815134

NOTE: For Operating Systems tested with the NVIDIA Tesla M6 GPU option, please see the Graphics

Adapter section in Optional Features NOTE: Operating System support may change. To get the most updated information, please go to the HPE OS Support Matrix at http://www.hpe.com/info/ossupport

• Up to 12 half-height, 6 full-height single-wide, or 3 full-height double-wide Compute Modules (mixing

allowed)

• Up to 5 half-height double-wide HPE Synergy D3940 Storage Modules (mixing with compute modules

in any to any ratio allowed)

• One HPE Synergy 12000 Frame will support up to twelve (12) HPE Synergy 480 Gen9 Compute

Modules

• 1600 x 1200 (32 bpp)

Page 8

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Standard Features

Page 8

HPE iLO Management On System Management Memory

Form Factor

HPE Synergy 480 Gen9 is a half-height compute module that plugs into the HPE 12000 Frame.

HPE management

HPE Synergy

HPE Synergy integrates HPE OneView to deliver ‘composable infrastructure’ with a view of resources. This flexible and scalable solution provides IT managers with the architecture to implement their software the changing business needs and the challenges of today's enterprise data centers.

https://www.hpe.com/us/en/product management/pip.hpe

HPE Integrated

Monitor your servers for ongoing management, service alerting, reporting and remote management with iLO. Learn more at

UEFI

Configure and boot your servers securely with industry standard Unified Extensible Firmware Interface (UEFI). Learn more at

HPE RESTful API

RESTful API is an application programming interface. RESTful Web Service API served by iLO’s web server.

http://www.hpe.com/info/restfulapi

Intelligent

Provision servers by discovering and deploying 1 to few servers with Intelligent Provisioning. Learn more at

http://www.hpe.com/servers/intelligentprovisioning

Server Utilities

Smart Update

Optimize firmware and driver updates with Smart Update solutions. Learn more at

http://www.hpe.com/info/smartupdate

Scripting Tools

Provision one to many servers using your own scripts to discover and deploy them with Scripting Tool Kit for Windows and Linux or Scripting Tools for Windows PowerShell. Learn more at

http:/

HPE iLO Mobile

Enables the ability to access, deploy, and manage your server anytime from anywhere from select smartphones and mobile devices. For additional information please visit:

http://www.hpe.com/info/ilo/mobileapp

Security

• Power-on password

CLP and XML scripting interface

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

• 16 Mb Flash Video Memory

• 256 Mb DDR 3 with ECC (112 MB after ECC and video)

NOTE: For GPU options, please see the Graphics Adapter section in Optional Features.

solution

Composer with HPE OneView

Lights Out

Provisioning

-defined data center (SDDC) -- and to address

-catalog/synergy/synergy-

-synergy-composer.1008615209.html

http://www.hpe.com/info/ilo

http://www.hpe.com/info/UEFI/docs

http://www.hpe.com/servers/stk and

/www.hpe.com/servers/powershell

Application

• Administrator's password

• Keyboard password (QuickLock)

• HPE iLO Management On System Management Chipset with:

– SSL encryption – Secure Shell version 2 – Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on browser,

Page 9

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Standard Features

Page 9

AES and RC4 encryption of video

Availability

Memory

power

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

–

• External USB port enable/disable

• Network server mode

• Serial interface control

• TPM (Trusted Platform Module) 1.2 or 2.0 option

• Advanced Encryption Standard (AES)

• Intel® Advanced Encryption Standard-New Instructions (AES-NI)

• Advanced ECC uses single device data correction (SDDC) to detect and correct single and all multi-bit

error that occurs within a single DRAM chip. Both x4 and x8 SDDC are supported (x8 requires lockstep

Mezzanine options and I/O

Storage

Processor/Chipset

HPE Synergy 12000 Frame

mode).

• Memory online spare mode (also known as rank spare mode) detects a rank that is degrading and

switches operation to the spare rank.

• Memory demand and patrol scrubbing to prevent accumulation of correctable errors and reducing the

likelihood of unplanned downtime.

• Failed DIMM isolation improves the service time thus improving the overall system availability.

• Address parity protection available on RDIMMs and LRDIMMs detects address bit errors to improve

service time and overall system availability.

• Multiple I/O mezzanine connectors that support a wide variety of mezzanine cards each supporting

multiple data paths routed to redundant interconnect modules.

• Network Adapter Teaming (bonding) provides network fault tolerance, transmit load balancing, and

switch-assisted load balancing.

• Two (2) Small Form Factor hot-plug SAS/SATA drive bays. Each can hold 2 uFF m.2 drives, for a total

capacity of 4 uFF drives.

• Choice of the HPE Smart Array P240nr Controller with 1GB FBWC, HPE Smart Array P542D Controller

with 2GB FBWC, HPE H240nr Smart HBA, or the HPE B140i (chipset SATA).

• RAID 0, 1, and 5 support for all storage controller offerings.

• Optional dual-port Fibre Channel mezzanine card(s) for redundant SAN connections.

• Processor internal sensors & thermal control protection against over-temperature conditions.

• Cache parity/ECC protects cache data from accidental data corruption.

• Machine Check Architecture (MCA) detects and captures hardware errors such as system bus, memory

ECC, parity, and cache, and improves service time.

• Intel® QPI Protocol Protection allows detection of data errors using a checksum of 8-bits.

• Core Disable for FRB (fault resilient boot) allows a system to power-on despite a failing core-pair. It

uses BIST (built-in self-test) results to detect a failure and disables the target core-pair upon subsequent boot.

• Up to 12 half-height, 6 full-height single-wide, or 3 full-height double-wide Compute Modules (mixing

allowed)

• Half-height double-wide HPE Synergy D3940 Storage Modules (see Synergy Storage for mixing with

compute modules and ratios allowed)

• Ten fans and single Frame Link Module included with every system

• Two appliance bays for redundant management appliances, embedded HPE OneView and other

solutions to come via REST

• Up to six 2650 Watt Power Supplies of Titanium class efficiency providing 7950 Watts of redundant

Page 10

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Standard Features

Page 10

• Up to 6 ICM module/switch bays for full redundancy of 3 fabrics.

Warranty

This product is covered by a global limited warranty and supported by HPE Services and a worldwide network

1288163

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

• 2 slots for Frame Link Modules, offers links to multiple frames through a private air-gapped

management network

• HPE Thermal Logic technology to maximize power and cooling efficiency

• HPE Intelligent Resources technology built-in to every option for HPE OneView Auto-Discovery of

resources.

of Hewlett Packard Enterprise Authorized Channel Partners. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HPE Support Services or customized service agreements. Certain restrictions and exclusions apply. Drives have either a one year or three year warranty; refer to specific drive QuickSpecs for details.

NOTE: Compute module warranty includes 3-year Parts, 3-year Labor, 3-year on-site support. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have Hewlett Packard Enterprise replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at

https://h20565.www2.hpe.com/portal/site/hpsc/public?ac.admitted=1483642840383.125225703.185

Page 11

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Optional Features

Page 11

Graphics Adapter

• NVIDIA Quadro M3000SE MXM server graphics

end professional 3D graphics, or VDI acceleration delivering true PC

Fibre Channel

Up to two (2) optional Fibre Channel mezzanine HBAs are supported on the HPE Synergy 480 Gen9.

Compatible SAN

HPE Synergy 480 Gen9 Compute Modules are optimized for HPE MSA, EVA, 3PAR, XP, and LeftHand.

HPE Virtual

HPE Synergy composable fabric delivers high performance and composability for the delivery of applications

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

– Workstation class performance for high-end professional 3D graphics – 4 GB GDDR5 memory – Supports bare metal and passthrough – Single Mezzanine adapter – Supports Environments (Refer to “Technical Specification” section at end of document for full listing per

graphics adapter)

 Bare Metal Client Operating System – Non Virtualized

• Microsoft ® Windows 7® SP1, Windows 10®

• RHEL 6.8+/7.2+

 Server / Hypervisor

• VMware® ESXi® version 6.0

AMD FirePro S7100X MXM server graphics

•

– Workstation class performance for high-

graphics experience.

– 8GB (GDDR5) memory

•

NOTE: Microsoft® Windows Server only supported in a Citrix or VMware virtualized environment NOTE: GRID license for use with NVIDIA Tesla M6 must be purchased separately through an NVIDIA

verified virtualization partner at http://www.nvidia.com/buygrid NOTE: Not all operating systems supported by the HPE Synergy 480 have been tested with the NVIDIA Tesla M6. These include RHEL 6.7, SLES 11, Ubuntu, Debian, CentOS, Fedora, and OpenSUSE.

– Supports up to six displays – Supports bare metal and pass-through – Supported environments (Refer to “Technical Specification” section at end of document for full listing per

graphics adapter)

 Bare Metal Client Operating System – Non Virtualized

• Microsoft ® Windows 7® SP1, 8.1

 Server / Hypervisor

• VMware ESXi version 6.0

NVIDIA Tesla M6 MXM server graphics

– Workstation class performance for ultra high end professional 3D graphics, or VDI acceleration delivering

true PC graphics experience.

– 8GB (GDDR5) memory – Supports shared graphics, pass-through and hardware GPU virtualization – Supported Environments (Refer to “Technical Specification” section at end of document for full listing per

graphics adapter)

 Bare Metal Client Operating System – Non Virtualized

• Microsoft Windows 7 SP1, 10

 Server / Hypervisor

• VMware vSphere5.5 or later

• Microsoft® Windows Server 2012 R2 (64-bit)

Support

Connect

and services. The composable fabric is based on master/satellite architecture.

Page 12

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Optional Features

Page 12

The HPE Virtual Connect SE 40Gb F8 Module, master module, based on composable fabric is designed for

Storage Software

Whether you need to solve a specific data protection, archiving, or storage command and control challenge, or

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

Composable Infrastructure. Its disaggregated, rack-scale design uses a master/satellite architecture to consolidate data center network connections, reduce hardware and scales network bandwidth across multiple HPE Synergy Frames.

The master module contains intelligent networking capabilities that extend connectivity to satellite frames through Interconnect Link Modules. This eliminates top of rack switch need and substantially reduces cost. The reduction in components also simplifies fabric management at scale while consuming fewer ports at the data center aggregation layer.

The HPE VC SE 40 Gb F8 modules eliminate up to 95% of network sprawl at the compute module edge with one device that converges traffic inside frames and directly connects to external LANs. Each redundant pair of Virtual Connect modules provide eight adjustable downlink connections (six Ethernet and two Fibre Channel, or eight Ethernet ) to dual-port 10 Gb and in case of 20 Gb Converged Network Adapters 16 adjustable downlinks connections 14 Ethernet and two Fibre Channel) on each compute module. Up to six uplinks using QSFP+ interfaces are available for connection to upstream Ethernet switches. Including splitter cables up to 24 uplinks are available for connection to upstream Ethernet and Fibre Channel. The HPE VC SE 40 Gb F8 modules avoid the confusion of traditional and other converged network solutions by eliminating the need for multiple Ethernet and Fibre Channel switches, extension modules, cables and software licenses. Also, Virtual Connect wire-once connection management is built-in enabling compute modules adds, moves and replacement in minutes instead of days or weeks. The Master/Satellite disaggregated architecture removes fixed of ratios of interconnects in every frame and allows extending networking resources pool for Virtual Connect to satellite frames.

For more information on Virtual Connect and converged network options, see

http://www.hpe.com/info/virtualconnect

deliver on strategic consolidation, compliance, or continuity initiatives, look no further than HPE storage software. Our storage software helps you reduce costs, simplify storage infrastructure, protect vital assets and respond faster to business opportunities.

Storage software that gets the job done:

• Data Protection and Recovery Software

Whether you're a large enterprise or a smaller business, HPE data protection and recovery software will cost-effectively protect you against disaster and ensure business continuity.

• Data Archive and Migration Software

The HPE storage software enables you to comply with data retention and retrieval requirements, improve application performance, and reduce costs by efficiently migrating infrequently accessed or less valuable data to lower cost storage.

• Storage Resource Management Software (SRM)

The HPE storage resource management software reduces operational costs and provides the command and control foundation you need to efficiently manage and visualize your physical and virtual environments.

• Data Replication Software

Hewlett Packard Enterprise offers array-based and host-based replication software for use in disaster recovery, testing, application development and reporting.

• Storage Device Management Software

Maximize your investment in HPE storage and networking with software that enables hardwarespecific configuration, performance tuning and connectivity management.

• HPE StoreVirtual VSA

HPE StoreVirtual VSA allows you to create fully featured shared storage on a VMware vSphere or Microsoft Hyper-V virtualized server.

Page 13

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Optional Features

Page 13

NOTE: For more information available Storage Software including QuickSpecs, please see:

510190144&pp=false&gclid=CJnV9MnZq9ECFUYdfwodbdsLmQ&gclsrc=ds

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

https://www.hpe.com/us/en/storage/3par.html?jumpid=ps_cu2va3x4mi_AID-

Page 14

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Support Services

Page 14

Service and Support

HPE Technology Services offers you a rich portfolio of consulting and support services designed to add value to o work closely with you, as your strategic partner, leveraging our full services portfolio to make sure that everything works to help optimize your ente

Choose from services aligned to our product offerings and lifecycle. From proactive onsite services to innovative support when your products are connected to level of attention and sup

HPE Technology Services for HPE Synergy

HPE Technology Services delivers confidence, reduces risk and helps customers realize agility and stability. Connect to technology lets you to tap into the knowledge of millions of devices and thousands of experts to stay informed and in control, anywhere, any time.

Protect your business beyond warranty with HPE Support Services

HPE support services designed to meet your IT and business needs.

HPE Foundation Care services

choose the type and le

HPE Proactive Care

through proactive service management and enhanced technical response

Advise, transform, integrate, support, automate, and flex

HPE Technology Services

composable infrastructure, at your pace and from wherever you are on the journey.

Start with the HP

define the topline strategy for projects confidently. This workshop clarifies your busines teams must resolve in order to meet these requirements. A detailed executive briefing or high summarizes the strategies, high

HPE Modernization and M

right cost and evolve your IT infrastructure, processes and organization taking advantage of “on infrastructure” innovations such as Enterprise virtualization, migration and automation projects.

HPE Flexible Capacity

capacity in the datacenter, plus a buffer of additional capacity. this provides enough room to grow your environment, but only pay for actual metered use. transitions and refresh can be built in, infrastructure and services are billed monthly, enabling you to align costs to business use.

HPE Datacenter Care Infrastructure Automation:

infrastructure auto rapid bare metal provisioning. With DC tools that work with OneView to help create a fast, approach, customers can deploy faster. DC and agile processes as part of the service. Customers schedule quarterly reviews and reports with HPE Center of Expertise, as well as having access to these experts when needed, for automation development and code

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

ur core products and solutions. We have the know-how and experience to put technology to work for you. We

rprise.

Hewlett Packard Enterprise Enterprsise, you choose the precise

port your business demands.

Hewlett Packard Enterprise to help prevent problems and solve issues faster. Our support

offer complete care and support expertise with committed response choices that are

offer scalable reactive support-packages for HPE Synergy and software. You

vel of service that is most suitable for your IT and business needs.

keeps your system stable and reliable helping to prevent problems and reduce outages

helps you get the most out of what you have today and transition to HPE Synergy, a

E Transformation Workshop to ensure that your business and IT organizations collaborate,

experts advise, transform, integrate and implement for platform refresh, datacenter consolidation

mation and is integrated with tools such as those from Chef, Puppet, and Docker, to enable

composable, software-defined, cloud-ready infrastructure and kick-start your

s requirements and the issues that IT and operations

-level plan and functional requirements.

igration Services helps you choose the right platform for the right workload at the

composable, converged, software-defined, technologies. Hewlett Packard

is a pay per use model for on premise infrastructure. This offers needed HPE Synergy

As HPE Synergy will be a dynamic environment,

HPE Synergy with OneView embedded helps enable

-IA, HPE service experts provide advice, support, best practices, for these agile, and reliable automated IT environment. With this

-IA delivers support to customers to enable infrastructure as code

-level report

-hybrid

Technology

Page 15

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Support Services

Page 15

coaching.

Choose the right support to maximize uptime, free up your resources, and achieve improved value the most out of

Optimized Support

HPE Proactive Care Advanced - 24x7 coverage, three year Support Service

Builds and incorporates on Proactive Care and also gives customers personalized technical and operationa advice from an assigned, local Account Support Manager for personalized technical collaboration, flexible access to specialist skills to help optimize business critical IT, and Critical Incident Management

is not affected if there hour response for hardware and Basic Software Support and Collaborative Call Management for selected non HPE software that offers two

https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA5

Standard Support

HPE Proactive Care with 24x7 coverage, three year Support Service

Hardware and software support s Advanced Solution Center specialists for start to finish case management plus proactive reports and recommendations for firmware and software management and best practice advice. This r provides 24x7 coverage with four Call Management for selected non

https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3

Deploy and integrate

HPE Factory Express Initial Frame Service for Synergy

Factory Express allows a customers’ configurations to be pre implementation project manager to manage the deployment end to end. The project manager will act as a single point of contact to coordinate the build, delivery and onsite installation and commissioning of the solution. In through comprehensive testing and a detailed documentation package on the configuration and settings of the delivered solution will be provided.

HPE Factory Expr

Add additional frames to your HPE Synergy Factory Express service or expand your existing HPE Synergy Infrastructure.

HPE Synergy First Frame Installation and Startup

compute modules, and HPE Synergy D3940 Storage Modules) and software startup for the first frame of your HPE Synergy deployment. Additional frames can be a Service.

HPE Synergy Additional Frame Installation and Startup Service

Synergy First Frame Startup service or expand your existing HPE Synergy Infrast

HPE Education Services

Training your IT staff is critical to help drive the value of HPE Synergy with increased efficiencies and better business outcomes. Training is key to the transformation and management of HPE Synergy.

Parts and Materials

Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to maintain the covered hardware product in operating condition, including parts and materials for available and recommended engineering improvements.

Parts a limitations as set forth in the manufacturer's operating manual, product data sheet will not be provided, repaired, or replaced a

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

—as you get

the existing IT assets while accelerating time-to-revenue.

to help so the business

is a system or device outage. This recommendation provides 24x7 coverage with four-

-hour callback for supported software issues.

-3259ENW.pdf

ervices designed specifically for your technology with rapid access to

ecommendation

-hour response for hardware and Basic Software Support and Collaborative

-HPE software that offers two-hour callback for supported software issues.

-8855ENW.pdf

-configured in the HPE Integration center with an

addition to the configuration and deployment activities, your HPE Synergy configuration goes

ess Synergy Additional Frame Service for Synergy

- Provides for hardware installation (HPE Synergy

Storage Modules, Virtual Connect modules, Interconnect Link Modules, Frame Link Modules,

dded using the HPE Synergy Additional Frame Installation and Startup

- Add additional frames to your HPE

ructure.

nd components that have reached their maximum supported lifetime and/or the maximum usage

QuickSpecs, or the technical product

s part of these services.

Page 16

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Support Services

Page 16

The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives replaced by

For more information

Additional Support Services can be found at HPE Support Services Central

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

Hewlett Packard Enterprise due to malfunction.

https://ssc.hpe.com/portal/site/ssc/

Page 17

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Configuration Information

Page 17

NOTE: Not all models are available in all regions. Check with your local country Hewlett Packard Enterprise offices for

Step 1: Base Compute Module Configuration (Select a configurable Compute Module)

Models

HPE Synergy 480 Gen9

Module

HPE Synergy 480 Gen9 Configure-

Module

HPE Synergy 480 Gen9 Configure-

Compute Module

SKU Number

Processors

DIMM Slots

24 DIMM slots for DDR4 RDIMM or LRDIMM Memory

Storage Controllers Supported

•

P240nr/1GB FBWC

Graphics Adapter (optional)

PCIe Expansion

Three (3) x16 PCIe I/O mezzanine connectors

Drives Supported

Two (2) HPE small form factor

drives

No support for local SFF or uFF

the P542D and HPE Synergy D3940

Storage Module

Two (2) HPE small form factor (SFF)

drive

Security

One (1) TPM connector

USB and MicroSD

One (1) front USB 3.0 port, One (1) internal USB 3.0 port, One (1) MicroSD

Management

HPE Synergy Composer powered by HPE OneView, iLO

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

– Factory Integrated Models

availability NOTE: This section lists some of the steps required to configure a Factory Integrated Model (configure-to-order or CTO compute module). To ensure only valid configurations are ordered, Hewlett Packard Enterprise recommends the use of an Hewlett Packard Enterprise approved configurator. Contact your local sales representative for information on CTO product offerings and requirements.

NOTE: Configure-to-order compute modules must start with a CTO Compute Module. NOTE: FIO indicates that this option is only available as a factory installable option. NOTE: All Factory Integrated Models will be populated with sufficient drive blanks based on the number of initial drives ordered

with the server.

NOTE: The Factory integrated w/o drive bay model ships with a grill blank in place of the drive cage and drive backplane.

Configure-to-order Compute

to-order w/o Drive Bays Compute

to-order Expanded Storage

732350-B21 732351-B21 732352-B21

1 or 2 E5-2600 v4 processors.

HPE Dynamic Smart Array B140i or one of the following controller options:

• HPE H240nr Smart Host

Bus Adapter

• HPE Smart Array P542D/2GB

FBWC

• HPE Smart Array P542D/2GB

FBWC

• HPE Smart Array

NVIDIA® Tesla® M6 Mezzanine GPU FIO Adapter with NVIDA® Grid™ vGPU 2.0 and later technology (1536

CUDA Cores)

(SFF) hot-plug SAS/SATA drive

bays with support for two (2)

SFF drives or up to four (4) uFF

External drive support enabled with

drives

hot-plug SAS/SATA/PCIe NVMe

bays with support for two (2) SFF

drives or up to four (4) uFF drives

Page 18

QuickSpecs

480 Gen9 Compute Module

Configuration Information

Page 18

Factory BTO and CTO Models

Pre-Configured BTO Models

Model

Entry

Base 1

Base 2

Performance 1

Performance 2

Part Number

Processor

1x E5-2609 v4

1x E5-2630 v4

1x E5-2650 v4

2x E5-2660 v4

2x E5-2680 v4

RDIMMs)

LRDIMMs)

Local Storage

Bays

2 Hot-plug SFF

Drives

Optional

Storage

HPE H240nr Smart

HPE Smart Array

battery

HPE Smart Array

battery

HPE Smart Array

battery

HPE Smart Array

Storage battery

Network

1x HPE Synergy

Network Adapter

1x HPE Synergy

Network Adapter

1x HPE Synergy

Network Adapter

1x HPE Synergy

Network Adapter

1x HPE Synergy

Network Adapter

I/O Expansion

3 x16 PCIe 3.0

HPE Processors

NOTE: All FIO processor kits (i.e. xxxxxx-L21) contain one (1) processor.

E5-2600 v4 series Processors

HPE Synergy 480 Gen9 Intel® Xeon® E5-2699 v4 (2.2GHz/22-core/55MB/145W) FIO Processor Kit

827187-L21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2697 v4 (2.3GHz/18-core/45MB/145W) FIO Processor Kit

827185-L21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2667 v4 (3.2GHz/8-core/25MB/135W) FIO Processor Kit

826999-L21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2650L v4 (1.7GHz/14-core/35MB/65W) FIO Processor Kit

826998-L21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2698 v4 (2.2GHz/20-core/50MB/135W) FIO Processor Kit

826997-L21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2695 v4 (2.1GHz/18-core/45MB/120W) FIO Processor Kit

826996-L21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2690 v4 (2.6GHz/14-core/35MB/135W) FIO Processor Kit

826995-L21

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

HPE Synergy

– Factory Integrated Models

826954-B21 826953-B21 826952-B21 826951-B21 826950-B21

Memory

Controller

Adapter

16GB (2x 8GB 2400MHz RDIMMs)

(SAS/SATA/SSD)

Host Bus Adapter

3820C 10/20G Converged

32GB (2x 16GB 2400MHz

(SAS/SATA/SSD)

P240nr/1GB FBWC with Smart Storage

3820C 10/20G Converged

64GB (4x 16GB 2400MHz

(SAS/SATA/SSD)

P240nr/1GB FBWC with Smart Storage

3820C 10/20G Converged

64GB (4x 16GB 2400MHz

(SAS/SATA/SSD)

P240nr/1GB FBWC with Smart Storage

3820C 10/20G Converged

128GB (4x 32GB 2400MHz

(SAS/SATA/SSD)

P240nr/1GB FBWC with Smart

3820C 10/20G Converged

Slots

Step 2: Choose Required Options (one of the following from each list unless otherwise noted)

NOTE: If two processors are desired, select one xxxxxx-L21 here in Step 2 and one

xxxxxx-B21 in Step 4.

Page 19

QuickSpecs

480 Gen9 Compute Module

Configuration Information

Page 19

HPE Synergy 480 Gen9 Intel® Xeon® E5-2683 v4 (2.1GHz/16-core/40MB/120W) FIO Processor Kit

826994-L21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2680 v4 (2.4GHz/14-core/35MB/120W) FIO Processor Kit

826993-L21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2643 v4 (3.4GHz/6-core/20MB/135W) FIO Processor Kit

826992-L21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2640 v4 (2.4GHz/10-core/25MB/90W) FIO Processor Kit

826991-L21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2637 v4 (3.5GHz/4-core/15MB/135W) FIO Processor Kit

826990-L21

Processor Kit

HPE Synergy 480 Gen9 Intel® Xeon® E5-2623 v4 (2.6GHz/4-core/10MB/85W) FIO Processor Kit

826988-L21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2620 v4 (2.1GHz/8-core/20MB/85W) FIO Processor Kit

826987-L21

Processor Kit

HPE Synergy 480 Gen9 Intel® Xeon® E5-2697A v4 (2.6GHz/16-core/40MB/145W) FIO Processor Kit

826985-L21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2660 v4 (2.0GHz/14-core/35MB/105W) FIO Processor Kit

826984-L21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2650 v4 (2.2GHz/12-core/30MB/105W) FIO Processor Kit

826983-L21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2630 v4 (2.2GHz/8-core/25MB/85W) FIO Processor Kit

826982-L21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2609 v4 (1.7GHz/8-core/20MB/85W) FIO Processor Kit

826980-L21

NOTE: All processors within the compute module must be identical.

odule,

HPE Memory

HPE SmartMemory

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

HPE Synergy

– Factory Integrated Models

HPE Synergy 480 Gen9 Intel® Xeon® E5-2630L v4 (1.8GHz/10-core/25MB/55W) FIO

HPE Synergy 480 Gen9 Intel® Xeon® E5-2603 v4 (1.7GHz/6-core/15MB/85W) FIO

NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology. NOTE: Turbo indicates the maximum potential frequency when using Intel® Turbo Boost Technology. The frequency boost increment is dependent on the processor SKU and

the number of active cores. In general, a higher boost increment is obtained when fewer cores are active. NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.

NOTE: Supports 1 or 2 processors. Mixing different processor models is not supported. NOTE: For the Intel® C610 Chipset E5-2600 v4 Series, the letter preceding the model

number indicates the Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a m 6 is socket/segment designation, 00 = Processor SKU, and x = L for low power SKUs. NOTE: The HPE Synergy 480 Gen9 Compute Module includes three I/O mezzanine connectors. A processor must be installed in processor slot 1 for access to mezzanine connector one and three (mezzanine connectors 1 and 3). A processor must be installed in processor slot 2 for access to the mezzanine connector two (mezzanine connector 2). NOTE: The processor model as well as the memory configuration determines the maximum speed memory can operate. Please see the see the "Memory" section later in this document.

826989-L21

826986-L21

Page 20

QuickSpecs

480 Gen9 Compute Module

Configuration Information

Page 20

HP 8GB (1x8GB) Single Rank x8 DDR4-2400 CAS-17-17-17 Registered Memory Kit

805347-B21

HP 16GB (1x16GB) Single Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit

805349-B21

HPE 16GB (1x16GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit

836220-B21

HP 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit

805351-B21

HPE 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Load Reduced Memory Kit

805353-B21

HPE 64GB (1x64GB) Quad Rank x4 DDR4-2400 CAS-17-17-17 Load Reduced Memory Kit

805358-B21

HPE 128GB (1x128GB) Octal Rank x4 DDR4-2400 CAS-20-18-18 Load Reduced Memory Kit

809208-B21

NOTE: HPE memory from previous generation servers (DDR3) is not compatible with

HPE Networking

10/20Gb Mezzanine Adapters

NOTE:

HPE Synergy 6810C 25/50Gb Ethernet Adptr

867322-B21

HPE Synergy 3820C 10/20Gb Converged Network Adapter

777430-B21

HPE Synergy 2820C 10Gb Converged Network Adapter

794538-B21

Step 3: Choose Additional Factory Integration Options

HPE Storage

HPE Smart Array P240nr/1GB FBWC 12Gb 1-port Internal SAS Controller

758801-B21

HPE Smart Array P542D/2GB FBWC 12Gb Mezzanine SAS Controller

759557-B21

HPE Compute Module Smart Array P542D SAS Cable

815173-B21

HPE Smart Storage Battery with 260mm Cable Kit

782958-B21

HPE H240nr 12Gb 1-port Int FIO Smart Host Bus Adapter

814069-B21

HP FIO Enable Smart Array B140i Setting

784308-B21

NOTE: If the HPE Smart Array P240nr or the HPE H240nr Smart Host Bus Adapter are

Array P240nr Controller. If the Smart Array P542D Controller is selected the Smart

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

HPE Synergy

– Factory Integrated Models

this compute module. HPE SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen9. For additional information, please see the HPE SmartMemory QuickSpecs at:

https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111535

NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed

within a compute module.

The compute module requires a minimum of one (1) mezzanine network adapter. NOTE: Mezzanine network adapters can be installed in any mezzanine connector. Hewlett Packard Enterprise

best practice is to install the first network adapter in mezzanine connector 3 to facilitate installation of Type C and D mezzanines in mezzanine connectors 1 or 2

Controllers

not selected, the B140i controller (chipset SATA) will be enabled to support SATA devices for the internal drive bays. If RAID is required when using the B140i controller, please choose HPE FIO B140i RAID Enable Kit - BIOS Setting’ (784308-B21). NOTE: The HPE Smart Array P542D is required for connection to storage resources in the HPE Synergy D3940 Storage Module. NOTE: To support local drive bay and D3940 Storage Module connectivity on the same controller the HPE Smart Array P542D (759557-B21) and P542D SAS cable are required with the HPE Synergy 480 Gen9 Configure-to-order Expanded Storage Compute Module (732352-B21).

NOTE: The HPE Smart Storage Battery (782958-B21) is included with the HPE Smart

Page 21

QuickSpecs

480 Gen9 Compute Module

Configuration Information

Page 21

Storage Battery is required to support battery-backed FBWC.

Step 4: Choose Additional Options for Factory Integration

NOTE: For additional options please see the Core Options and Additional sections below; or the following:

https://www.hpe.com/h20195/v2/GetHtml.aspx?docname=c04815141

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

HPE Synergy

– Factory Integrated Models

• HPE Synergy 12000 Frame QuickSpecs

https://www.hpe.com/h20195/v2/GetHtml.aspx?docname=c04815113

• HPE Synergy Interconnect and Mezzanine Components QuickSpecs

https://www.hpe.com/h20195/v2/GetHtml.aspx?docname=c04815110

• HPE Synergy D3940 Storage Module QuickSpecs

Page 22

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Additional Options

Page 22

HPE Graphics

HPE Synergy 480 NVIDIA Tesla M6 FIO Mezzanine Card

826042-B21

NOTE: Must be installed in Mezz 1. Due to heatsink size, no other card may be installed

HPE Networking

10/20Gb Mezzanine Adapters

HPE Synergy 6810C 25/50Gb Ethernet Adptr

867322-B21

HPE Synergy 3820C 10/20Gb Converged Network Adapter

777430-B21

HPE Synergy 2820C 10Gb Converged Network Adapter

794538-B21

HPE Fibre Channel

HPE Synergy 3830C 16Gb Fibre Channel Host Bus Adapter

777452-B21

HPE Synergy 3530C 16Gb Fibre Channel Host Bus Adapter

777454-B21

HPE Processors

E5-2600 v4 series Processors

HPE Synergy 480 Gen9 Intel® Xeon® E5-2699 v4 (2.2GHz/22-core/55MB/145W) Processor Kit

827187-B21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2697 v4 (2.3GHz/18-core/45MB/145W) Processor Kit

827185-B21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2667 v4 (3.2GHz/8-core/25MB/135W) Processor Kit

826999-B21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2650L v4 (1.7GHz/14-core/35MB/65W) Processor Kit

826998-B21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2698 v4 (2.2GHz/20-core/50MB/135W) Processor Kit

826997-B21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2695 v4 (2.1GHz/18-core/45MB/120W) Processor Kit

826996-B21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2690 v4 (2.6GHz/14-core/35MB/135W) Processor Kit

826995-B21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2683 v4 (2.1GHz/16-core/40MB/120W) Processor Kit

826994-B21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2680 v4 (2.4GHz/14-core/35MB/120W) Processor Kit

826993-B21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2643 v4 (3.4GHz/6-core/20MB/135W) Processor Kit

826992-B21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2640 v4 (2.4GHz/10-core/25MB/90W) Processor Kit

826991-B21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2637 v4 (3.5GHz/4-core/15MB/135W) Processor Kit

826990-B21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2630L v4 (1.8GHz/10-core/25MB/55W)

826989-B21

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

Adapters

in Mezz 2 and the HPE Smart Array P542D/2GB FBWC 12Gb Mezzanine SAS Controller, which provides connectivity to direct attach storage, cannot be in the same server due to size restraints. NOTE: NVIDIA Tesla M6 requires NVIDIA Grid 2.0 or later to enable vGPU features. vGPU not enabled by default on the card alone. For more information, go to NVIDIA:

http://www.nvidia.com/grid

NOTE: GRID license for use with NVIDIA Tesla M6 must be purchased separately

through an NVIDIA verified virtualization partner at http://www.nvidia.com/buygrid

Page 23

QuickSpecs

Additional Options

Page 23

Processor Kit

HPE Synergy 480 Gen9 Intel® Xeon® E5-2623 v4 (2.6GHz/4-core/10MB/85W) Processor Kit

826988-B21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2620 v4 (2.1GHz/8-core/20MB/85W) Processor Kit

826987-B21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2603 v4 (1.7GHz/6-core/15MB/85W) Processor Kit

826986-B21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2697A v4 (2.6GHz/16-core/40MB/145W) Processor Kit

826985-B21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2660 v4 (2.0GHz/14-core/35MB/105W) Processor Kit

826984-B21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2650 v4 (2.2GHz/12-core/30MB/105W) Processor Kit

826983-B21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2630 v4 (2.2GHz/8-core/25MB/85W) Processor Kit

826982-B21

HPE Synergy 480 Gen9 Intel® Xeon® E5-2609 v4 (1.7GHz/8-core/20MB/85W) Processor Kit

826980-B21

NOTE:

n using Intel® Turbo Boost

HPE Memory

HPE SmartMemory

HP 8GB (1x8GB) Single Rank x8 DDR4-2400 CAS-17-17-17 Registered Memory Kit

805347-B21

HP 16GB (1x16GB) Single Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit

805349-B21

HPE 16GB (1x16GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit

836220-B21

HP 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit

805351-B21

HPE 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Load Reduced Memory Kit

805353-B21

HPE 64GB (1x64GB) Quad Rank x4 DDR4-2400 CAS-17-17-17 Load Reduced Memory

805358-B21

HPE 128GB (1x128GB) Octal Rank x4 DDR4-2400 CAS-20-18-18 Load Reduced Memory Kit

809208-B21

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

HPE Synergy 480 Gen9 Compute Module

All processors within the compute module must be identical.

NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology. NOTE: Turbo indicates the maximum potential frequency whe Technology. The frequency boost increment is dependent on the processor SKU and

the number of active cores. In general, a higher boost increment is obtained when fewer

cores are active. NOTE: DDR4 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs installed.

NOTE: Supports 1 or 2 processors. Mixing different processor models is not supported. NOTE: For the Intel® C610 Chipset E5-2600 v4 Series, the letter preceding the model

number indicates the Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a module, 6 is socket/segment designation, 00 = Processor SKU, and x = L for low power SKUs. NOTE: The HPE Synergy 480 Gen9 Compute Module includes three I/O mezzanine connectors. A processor must be installed in processor slot 1 for access to mezzanine connector one and three (mezzanine connectors 1 and 3). A processor must be installed in processor slot 2 for access to the mezzanine connector two (mezzanine connector 2). NOTE: The processor model as well as the memory configuration determines the maximum speed memory can operate. Please see the see the "Memory" section later in this document.

Kit

Page 24

QuickSpecs

Additional Options

Page 24

NOTE: HPE memory from previous generation servers (DDR3) is not compatible with

HPE Drives

NOTE: The HPE Synergy 480 Gen9 Compute Module supports the HPE hot-plug small

NOTE: The drive options are not required when configuring a drive-less model.

HPE Synergy 480 Gen9 Compute Module support all small form factor (SFF) SAS and

Drive Qualification Exceptions:

At this time there are no exceptions to list.

HPE Security

HPE Trusted Platform Module Option

488069-B21

HPE Trusted Platform Module 2.0 Kit

745823-B21

NOTE: The TPM (Trusted Platform Module) is a microcontroller chip that can securely

HPE Storage

HPE Smart Array P240nr/1GB FBWC 12Gb 1-port Internal SAS Controller

758801-B21

HPE Smart Array P542D/2GB FBWC 12Gb Mezzanine SAS Controller

759557-B21

HPE H240nr 12Gb 1-port Internal Smart Host Bus Adapter

759553-B21

HPE Compute Module Smart Array P542D SAS Cable

815173-B21

HPE Smart Storage Battery with 260mm Cable Kit

782958-B21

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

HPE Synergy 480 Gen9 Compute Module

https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111535

NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed

within a compute module.

form factor (SFF) SmartDrive carrier for enhanced management and reduced maintenance errors. HPE drives from generation G7 servers and before are not compatible with the HPE Synergy 480 Gen9 drive bays. NOTE: The mixing of standard SAS drives with SAS SSD is supported within the compute module, but limits the RAID configuration to two separate RAID 0 volumes. Mixing of other drives types is not supported. NOTE: HPE drives have either a one year or three year warranty; refer to the specific drive QuickSpecs for details.

https://www.hpe.com/h20195/v2/GetPDF.aspx%2Fc04111744.pdf and https://www.hpe.com/h20195/v2/GetHtml.aspx?docname=c04154378

SATA HDDs and SSDs currently certified in HPE Smart Carriers. Any exceptions to this qualification will be listed on this page by drive description and part number.

store artifacts used to authenticate the server platform. These artifacts can include passwords, certificates and encryption keys. Windows® BitLocker™ Drive Encryption (BitLocker) is a data protection feature available in Windows Server® 2012. BitLocker leverages the enhanced security capabilities of a Trusted Platform Module (TPM) version 1.2. The TPM works with BitLocker to help protect user data and to ensure that a server running Windows Server 2012 has not been tampered with while the system was offline.

NOTE: For more information about TPM, including a white paper, go to

https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=c04939549

NOTE: HPE Synergy OS pre-installed units will come with the partition required for TPM

deployment. NOTE: The TPM key is unique to every TPM deployed server and must be retained. Misplacing or losing the key could result in data loss.

Controllers

Page 25

QuickSpecs

Additional Options

Page 25

NOTE: If the HPE Smart Array P240nr or the HPE H240nr Smart Host Bus Adapter are

HPE Flash Media

HPE Enterprise Mainstream Flash Media Kits for Memory Cards

HPE 8GB microSD Enterprise Mainstream Flash Media Kit

726116-B21

HPE 8GB microSD Enterprise Mainstream Flash Media Kit

737959-B21

HPE 32GB microSD Mainstream Flash Media Kit

700139-B21

HP Dual 8GB microSD Enterprise Midline USB Kit

741279-B21

NOTE: Please see the QuickSpecs for Technical Specifications and additional

HPE Synergy

NOTE: See HPE Support Services Central for additional services at

http://ssc.hpe.com/portal/site/ssc/

HPE Synergy Proactive Care Services

HPE 3 Year Proactive Care 24x7 Synergy 480 Service

H0UT1E

HPE 3 Year Proactive Care 24x7 with DMR Synergy 480 Service

H0UT2E

HPE 3 Year Proactive Care Advanced 24x7 Synergy 480 Service

H0UT4E

HPE 3 Year Proactive Care Advanced 24x7 with DMR Synergy 480 Service

H0UT5E

Deployment/Installation & Start-up Services

HPE Factory Express Synergy Initial Frame Package 4 Service

HA454A1-300

HPE Factory Express Synergy Add-on Frame Package 4 Service

HA454A1-301

HPE Synergy First Frame Startup Service

U8JM3E

HPE Synergy Additional Frame Startup Service

U8JM4E

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

HPE Synergy 480 Gen9 Compute Module

not selected, the B140i controller (chipset SATA) will be enabled to support SATA devices for the internal drive bays. If RAID is required when using the B140i controller, please choose HPE FIO B140i RAID Enable Kit - BIOS Setting (784308-B21). NOTE: The HPE Smart Array P542D is required for connection to storage resources in the HPE Synergy D3940 Storage Module. NOTE: To support local drive bay and D3940 Storage Module connectivity on the same controller the HPE Smart Array P542D (759557-B21) and P542D SAS cable are required with the HPE Synergy 480 Gen9 Configure-to-order Expanded Storage Compute Module (732352-B21). NOTE: The HPE Smart Storage Battery (782958-B21) is included with the HPE Smart Array P240nr Controller. If the Smart Array P542D Controller is selected the Smart Storage Battery is required to support battery-backed FBWC.

Kits

information:

https://www.hpe.com/h20195/v2/GetDocument.aspx?docname=c04123175

Services

Page 26

QuickSpecs

gy 480 Gen9 Compute Module

Memory

Page 26

Memory Subsystem Architecture Each processor socket contains four memory channels th processor or a grand total of

Memory Population Rules and Guidelines

Synergy 480 Compute Module

Memory Speed Table

Synergy 3DPC EP Platform

Synergy 480 Gen9

DIMM Type

HPE SKU P/N

SKU Description

HPE Server Memory Speed (MT/s)

DIMM Type

HPE SKU P/N

SKU Description

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

HPE Syner

at support three DIMMs each for a total of 12 (12) DIMM per installed

twenty four (24) DIMMs for the compute module.

• A minimum of one DIMM is required per processor.

• Install DIMMs only if the corresponding processor is installed.

• If only one processor is installed in a two processor system, only half of the DIMM slots are available.

• DIMM sizes can be mixed in channel. To maximize performance, it is recommended to balance the total memory capacity

between all installed processors and to load the channels similarly whenever possible.

• LRDIMM and RDIMMs are all distinct memory technologies and cannot be mixed within a compute module.

• DIMMs of different speeds may be mixed in any order; the compute module will select a common optimal speed.

• The maximum memory speed is a function of the memory type, memory configuration, and processor model.

• The maximum memory capacity is a function of the memory type and number of installed processors.

• HPE memory from previous generation servers is not compatible with the HPE Synergy 480 Gen9 Compute Module.

• To realize the performance memory capabilities listed in this document, HPE SmartMemory is required. For additional

information, please see the HPE SmartMemory QuickSpecs at:

https://www.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111535

805347-B21 805349-B21 836220-B21 805351-B21

HPE 8GB 1Rx8 PC4-2400T-R Kit

DIMM Rank Single Rank (1R) Single Rank (1R) Dual Rank (2R) Dual Rank (2R)

DIMM Capacity

8GB 16GB 16GB 32GB

Voltage 1.2V 1.2V 1.2V 1.2V

DRAM depth [bit] 1G 2G 1G 2G

DRAM Width [bit] x8 x4 x4 x4

DRAM Density 8Gb 8Gb 4Gb 8Gb

CAS Latency 17-17-17 17-17-17 17-17-17 17-17-17

DIMM Native Speed (MT/s) 2400 2400 2400 2400

1 DIMM Per Channel 2400 2400 2400 2400

2 DIMM Per Channel 2133 2133 2400 2400

3 DIMM Per Channel 1866 1866 1600 1600

805353-B21 805358-B21 809208-B21

HPE 32GB 2Rx4 PC4-

2400T-L Kit

DIMM Rank Dual Rank (2R) Quad Rank (4R) Octal Rank (8R)

DIMM Capacity

HPE 16GB 1Rx4 PC4-2400T-R Kit

HPE 16GB 2Rx4 PC4-2400T-R Kit

HPE 32GB 2Rx4 PC4-2400T-R Kit

Load Reduced (LRDIMM)

HPE 64GB 4Rx4 PC4-

2400T-L Kit

HPE 128GB 8Rx4 PC4-

2400U-L Kit

32GB 64GB 128GB

Page 27

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Memory

Page 27

HPE Server Memory Speed (MT/s)

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

Voltage 1.2V 1.2V 1.2V

DRAM depth [bit] 2G 2G 2G

DRAM Width [bit] x4 x4 x4

DRAM Density 8Gb 8Gb 8Gb

CAS Latency 17-17-17 17-17-17 20-18-18

DIMM Native Speed (MT/s) 2400 2400 2400

1 DIMM Per Channel 2400 2400 2400

2 DIMM Per Channel 2400 2400 2400

3 DIMM Per Channel 2133 2133 2133

Page 28

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Storage

Page 28

1-2

2 x SFF hot-plug drive bays for SAS, SATA, SAS SDD, SATA SSD, NVMe PCIe

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

Page 29

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Technical Specifications

Page 29

System Unit

Dimensions (H x W x

(with bezel)

2.5 x 8.43 x 23.62 in. (63.5 x 214 x 600 mm)

Weight

Maximum: all processors, 24 DIMMs cards, and battery installed)

18 lbs. (8.16 kg)

Minimum: one processor and 1 DIMM installed

14.5 lbs. (6.57 kg)

Power

For power specifications including input requirements, BTU rating, and power supply output, please see the To review typical system power ratings use the via the online tool located at http://www.hpe.com/info/hpepoweradvisor

System Inlet

Operating

10°C to 35°C (50°F to 95°F)

System performance may be reduced if operating with a fan fault.

Non-operating

-30C to 60C (-22F to 140F).

Extended Ambient

Qualifications for extended ambient configurations are detailed at:

https://www.hpe.com/servers/ASHRAE

Relative Humidity

Operating

10% to 90% @ 28C (82.4F)

Non-operating

5% to 95% @ 38.7C (101.7F)

Acoustic Noise

For acoustic noise specifications, please see the HPE Synergy 12000 Frame QuickSpecs

HPE Smart Array

Storage Interface

12 Gb/s SAS (Serial Attached SCSI)

6 Gb/s SATA (Serial Advanced Technology Attachment)

SAS Connectors

Two (2) external ports supporting x4 SAS links each and two (2) internal ports supporting x4 SAS links each

SAS Speed

x16 12 Gb/s per physical link

PCIe Link Rate

PCIe 3.0 x8 links

Memory Bus Speed

DDR3-1866 MHz, 72-bit wide bus at 14.92 GB/s (2 Gb cache module)

Logical Drives Supported

64 logical drives

Max Drives Supported

Up to 256 drives (Up to 128 drives per logical drive)

RAID Support

RAID 6, 60 (Advanced Data Guarding) RAID 5, 50 (Distributed Data Guarding) RAID 1, 10 (Drive Mirroring) RAID 1 ADM, 10 ADM (Advanced Data Mirroring) RAID 0 (Striping)

Upgradeable

Flashable ROM with redundant firmware images

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

(approximate)

, drives, mezzanine

one flash cache

P542D Controller

Specifications

Temperature

Operating Support

(non-condensing)

HPE Synergy Frame QuickSpecs.

HPE Power Advisor which is available

The upper limit may be limited by the type and number of options installed.

Firmware

Page 30

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Technical Specifications

Page 30

HPE Smart Array

Disk Drive Interface

12 Gb/s SAS (Serial Attached SCSI) 6 Gb/s SATA (Serial ATA)

Server Interface

x8 5G PCIe 3.0 provides 8 Gb/s maximum bandwidth

Cache Memory

1 Gb flash backed write cache (FBWC) cache standard

Logical Drives Supported

64 (with included 1Gb cache)

Host Memory Addressing

64-bit, supporting servers memory space greater than 4 Gb

RAID Support

RAID 1 (mirroring), RAID 0 (striping), RAID 5, RAID 10

Other

Upgradeable firmware with recovery ROM Online drive flash (with SAS drives)

HPE H240nr Smart

Disk Drive Interface

12 Gb/s SAS (Serial Attached SCSI) 6 Gb/s SATA (Serial ATA)

Compute module Interface

x8 5G PCIe 3.0 provides 8 Gb/s maximum bandwidth

Cache Memory

None

Logical Drives Supported

Host Memory Addressing

64-bit, supporting compute modules memory space greater than 4 Gb

RAID Support

RAID 1 (mirroring) and RAID 0 (striping), RAID 5, RAID 10

Other

Upgradeable firmware with recovery ROM Online drive flash (with SAS drives)

HPE Dynamic

Disk Drive Interface

6 Gb/s SATA (Serial ATA)

Compute module Interface

Embedded x4 PCIe 2.0

SAS Connectors Cache Memory

2 internal SATA ports None

SAS Speed

Supported

6 Gb/s SATA links Up to 10 logical volumes (4 physical drives)

Host Memory Addressing

64-bit, supporting greater than 4Gb compute module memory space

Hot Plug Support RAID Support

Yes RAID 1 (Mirroring), RAID 0 (Striping), RAID 5

Other

Upgradeable firmware with recovery ROM

HPE

Type

Dual-port 10 Gb mezzanine

Network Processor

QLogic 57840S with integrated MAC/PHY

Data Transfer Method

x8 PCI Express 3.0

Network Transfer Rate

Two ports, each at 20Gbps full duplex; 40 Gb/s aggregate full duplex theoretical ban

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

P240nr/1GB Controller

HBA

Smart Array B140i Controller

Logical Drives

Synergy 2820C 10Gb Converged Network Adapter

dwidth

Page 31

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Technical Specifications

Page 31

IEEE Compliance

802.3, 802.3ab, 802.3u, 802.3x, 802.3ad, 802.3p, 802.1q, 802.3ae, 802.3ap

Standard Features

Delivers flexibility to compose multiple network flows including Ethernet and FCoE or iSCSI within each connection. Full hardware offloa performance converged Ethernet data and storage networks. Flex FlexNIC’s and FlexHBA’s to optimize connectivity for diff 100 100 10 Gb. A single Type C mezzanine form factor provides fle any HPE Synergy Compute Module. Provides up to 40 Gb/s of converged bi leading throughput and latency performance. Supports Tunnel Offload with NVGRE and VXLAN. Hardware accelerat Orchestrates reliable adapter firmware updates with an entire HPE Synergy infrastructure from a single tool, HPE Synergy Composer. Integrated PHY and MAC. Support for Preboot eXecution Envir Support for SR Support for Network Partitioning (NPAR) when using Pass

HPE

Type

Dual-port 10/20 Gb mezzanine

Network Processor

QLogic 57840S with integrated MAC/PHY

Data Transfer Method

x8 PCI Express 3.0

Network Transfer Rate

Two ports, each at 40 Gb/s full duplex; 80Gbps aggregate full duplex theoretical bandwidth

IEEE Compliance

802.3, 802.3ab, 802.3u, 802.3x, 802.3ad, 802.3p, 802.1q, 802.3ae, 802.3ap

Standard Features

Delivers flexibility to compose multiple network flows including Ethernet and FCoE or iSCSI within each connection. Full hardware offload of FCoE and iSCSI storage protocol processing for highest performance converged E Flex FlexNIC’s and FlexHBA’s to optimize connectivity for different application needs. 100 100 20 Gb. A single Type C mezzanine form factor provides flexible network and storage I/O for any HPE Synergy Compute Module. Provides up to 8 Industry Supports Tunnel Offload with NVGRE and VXLAN. Hardware acceleration and offloads for stateless TCP/IP, TCP Offload Engine (TOE). Orchestrates reliab infrastructure from a single tool, HPE Synergy Composer. Integrated PHY and MAC. Support for Preboot eXecution Environment (PXE). Support for SR Support for Network Partit

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

d of FCoE and iSCSI storage protocol processing for highest

-10 Technology allows you to fine tune bandwidth for up to four partitioned erent application needs. From

Mb/s to 10 Gb/s on up to four "Physical Function" NICs per port, in increments of Mb/s for NIC. The combined bandwidth of NICs cannot exceed port bandwidth i.e.

xible network and storage I/O for

-directional Ethernet bandwidth. Industry-

ion and offloads for stateless TCP/IP, TCP Offload Engine (TOE).

-IOV (Windows, Linux, VMware).

Synergy 3820C 10/20Gb Converged Network Adapter

thernet data and storage networks.

-20 Technology allows you to fine tune bandwidth for up to four partitioned

Mb/s to 20 Gb/s on up to four "Physical Function" NICs per port, in increments of Mb/s for NIC. The combined bandwidth of NICs cannot exceed port bandwidth i.e.

0 Gb/s of converged bi-directional Ethernet bandwidth.

-leading throughput and latency performance.

le adapter firmware updates with an entire HPE Synergy

-IOV (Windows, Linux, VMware). ioning (NPAR) when using Pass-thru modules.

onment (PXE).

-thru modules.

From

Page 32

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Technical Specifications

Page 32

HPE Synergy 3830C

Type

Dual-port 16Gb mezzanine

Network Processor

QLogic 8324

Data Transfer Method

x8 PCI Express 3.0

Network Transfer Rate

Two ports, each at 16 Gb/s, each direction; 64 Gb

IEEE Compliance

802.3ae, 802.1Q, 802.3x, 802.1p, 802.3ad/LACP, 802.1AB(LLDP), 802.1Qbg,

802.1Qbb, 802.1Qaz, 802.3ap

Standard Features

Flexible Configuration and Connection of Pools of Compute Resources.

Performance Optimized:

Virtualiza

Supports QLogic StorFusion(TM) technology designed to enhance diagnostic and troubleshooting capabilities, quicken SAN deployment, and improve QoS when connected to Brocade 16

Power Optimized:

RAS Optimized:

Security Optimized:

Management Optimized:

infrastructure from a single too, HPE Synergy Composer.

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

16Gb Fibre Channel Host Bus Adapter

• Provides flexible connectivity to HPE Synergy Virtual Connect FC Modules and

/s aggregate full duplex theoretical bandwidth

Brocade FC Switch Modules.

• Capable of delivering twice the data throughput (MB/s) compared to 8 Gb FC

HBAs.

• High link speed combined with larger data block sizes results in improved

application performance.

• Dynamic Port Utilization architecture delivers up to 600 K Input Output

Operations per second (IOPS) on each port or up to 1.2 million IOPS with single port operation.

tion Optimized:

• Ideal for high density server virtualization environments.

• Enables more applications and Virtual Machines to run on a single HPE Synergy

Compute Module and Fibre Channel port, resulting in reduced cabling and a higher return on IT investment.

Gb FC fabrics.

• Accelerate SAN deployment (FA-PWWN, F-BLD).

• Improve network resiliency and Quality of Service (FEC, CS_CTL).

• Eenhance diagnostics and troubleshooting (Clearlink®, LCB, RDP, FDMI, FC

Ping, FC Traceroute).

• Latest generation technology saves power.

• Reduced number of components on each FC HBA reduces overall power

consumption.

• Highest Data Integrity; Overlapping Protection Domains (OPD) extended for

control and data paths.

• SAN-level authentication (FC-SP), fabric-level isolation (NPIV and end-to-end

data integrity (T10).

• Provisions and updates all adapters quickly and consistently using the HPE

Synergy template-driven server profiles.

• Orchestrates reliable adapter firmware updates with an entire HPE Synergy

Page 33

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Technical Specifications

Page 33

Fault tolerant HBA Architecture. Two 16 Multi RoHS compliance. QLogic Converge Console management utility for centralized. management and remote control of distributed HBAs.

NVIDIA® Tesla® M6

Memory size

8 Gb

Memory type

GDDR-5

Memory interface

256-bit

Card type

MXM-v3.1

I/O interface

PCIe (x16) Gen3

Max Power consumption

100W

API

DirectX 12, Shader Model 5.0; OpenGL4.5, CUDA, DirectCompute, OpenCL

Operating Systems

Citrix XenServer 6.5 or later (Pass VMware vSphere 5.5 or later (vDGA) Microsoft® Windows Server 2012 R2 (64 editions

NOTE:

environment

NOTE:

Environment-

End-of-life

Hewlett Packard Enterprise offers end-of-life Hewlett Packard Enterprise product return, trade information, please go to: please g Packard Enterprise sales office. Products returned to Hewlett Packard Enterprise will be recycled, recovered or disposed of in a respo

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard Enterpris site at: recyclers and other WEEE treatment facilities as well as Hewlett Packard Enterprise OEM customers who integrate and re-sell Hewlett Packard Enterprise equipment.

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

Gb/s Fibre Channel ports.

-Path support for redundant HBAs and paths including Linux driver failover.

GPU Mezzanine Card

friendly Products and Approach

-Through GPU)

-bit) Standard, Enterprise and DataCenter

Microsoft® Windows Server only supported in a Citrix or VMware virtualized

Bare metal not supported at this time.

Management and Recycling

-in, and recycling programs in many geographic areas. For trade-in http://www.hpe.com/info/recycle. To recycle your product,

o to: http://www.hpe.com/info/recycle or contact your nearest Hewlett

nsible manner.

e web

http://www.hpe.com/info/recycle These instructions may be used by

Page 34

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Summary of Changes

Page 34

Date

Version History

Action

Description of Change

17-Jul-2017

From Version 10 to 11

Changed

Configuration Information-Factory Integrated Models and Related Options sections were updated.

Added

SKU added in Configuration Information-Factory Integrated Models and Related Options sections: 867322-B21

08-May-2017

From Version 9 to 10

Changed

Additional Options and Memory sections were updated.

Added

SKUs added in Additional Options: 836220-B21, 809208-B21, 836220-B21, 809208-B21.

27-Mar-2017

From Version 8 to 9

Changed

Overview, Optional Features, and Configuration Information – Factory Integrated Models sections were updated.

Removed

Obsolete SKUs were deleted: 854845-B21, 652749-B21.

13-Jan-2017

From Version 7 to 8

Changed

Standard Features, Optional Features, Support Services, Configuration Information sections were updated.

28-Nov-2016

From Version 6 to 7

Changed

Standard Features, Services and Support, and Configuration Information - Factory Integrated Models sections were updated.

19-Aug-2016

From Version 5 to 6

Changed

Format edited in document.

29-Jul-2016

From Version 4 to 5

Changed

QuickSpecs updated.

Added

SKUs added: 854845-B21, 777454-B21.

Removed

SKU deleted: 777434-B21

08-Apr-2016

From Version 3 to 4

Changed

Configuration Information - Factory Integrated Models, and Additional Options sections were updated.

Added

SKUs were added/replaced in Configuration Information – Factory I 827187 B21, 826996 826992 B21, 826987 826983-B21, 826982-B21, 826980-B21.

Removed

Obsolete SKUs were deleted: D8S85AAE, D8S84A.

31-Mar-2016

From Version 2 to 3

Changed

Sections in QuickSpecs were updated.

Added

SKUs added: 732371 L21, 732376 732368 B21, 805358 758801 B21, 784308 732372 B21, 732377 488069 726116 H0UT2E, H0UT4E, H0UT U8JM3E, U8JM4E.

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

- Factory Integrated, Additional Options, and Memory

ntegrated Models and Additional Options sections:

-B21, 827185-B21, 826999-B21, 826998-B21, 826997-

-B21, 826995-B21, 826994-B21, 826993-B21,

-B21, 826991-B21, 826990-B21, 826989-B21, 826988-

-B21, 826986-B21, 826985-B21, 826984-B21,

-L21, 732372-L21, 732373-L21, 732374-L21, 732375-

-L21, 732377-L21, 732386-L21, 732369-L21,

-L21, 805347-B21, 805349-B21, 805351-B21, 805353-

-B21, 777430-B21, 777434-B21, 794538-B21,

-B21, 759557-B21, 815173-B21, 782958-B21, 814069-

-B21, 826042-B21, 777452-B21, 732371-B21,

-B21, 732373-B21, 732374-B21, 732375-B21, 732376-

-B21, 732386-B21, 732369-B21, 732368-B21,

-B21, 745823-B21, 759553-B21, D8S85AAE, D8S84A,

-B21, 737959-B21, 700139-B21, 741279-B21, H0UT1E, 5E, HA454A1-300, HA454A1-301,

Page 35

QuickSpecs

HPE Synergy 480 Gen9 Compute Module

Technical Specifications

Page 35

17-Dec-2015

From Version 1 to 2

Changed

Overview, Standard Features, Configuration Information-Factory, Integrated Models, Additional Options, Memory, Storage, Technical Specifications sections were updated.

1-Dec-2015

Version 1

Created

New QuickSpecs

© Copyright 2017 Hewlett Packard Enterprise Development LP. The information contained herein is sub services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.

Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are countries.

For drives, 1GB = 1 billion bytes. Actual formatted capacity is less.

c04815134 - 15418 - Worldwide - V11 - 17-Jul-2017

RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may

have older product names and model numbers that differ from current models.

ject to change without notice. The only warranties for Hewlett Packard Enterprise products and

trademarks of Intel Corporation in the U.S. and other