The HP StorageWorks 2000sa Modular Smart Array (MSA2000sa) represents the end-to-end Serial Attached SCSI (SAS) model of
the MSA2000 family (which includes the MSA2000fc Fibre Channel and MSA2000i iSCSI models), a new generation of HP storage
arrays specifically designed for entry-level customers featuring the very latest in functionality and technology at highly affordable
price points.
The MSA2000sa is a 2U direct attach, external shared storage solution designed for small to medium size deployments or remote
locations. It comes in two models - a basic single controller model for low initial cost with the ability to upgrade later; and a model
with dual controllers standard for maximum performance. This solution offers a SAS host interface to accommodate twelve 3.5 inch
enterprise class SAS drives and archival-class SATA drives. Additional capacity can easily be added when needed by attaching up to
three MSA2000 12 bay drive enclosures. Maximum raw capacity ranges from 3.6TB SAS or 12TB SATA in the base cabinet, to over
14.4TB SAS or 48TB SATA with the addition of the maximum number of drive enclosures. NOTE: there are no additional hidden
charges, licenses or fees as you add enclosures or hosts and users.
The MSA2000 offers many distinct features such as the ability to mix SAS and SATA RAID sets (volumes) within the same enclosure
greatly increases the flexibility and economy of assigning mission-critical data and archival data to the proper drive type. The wide
variety of RAID levels supported assures the user of just the right level of performance and protection demanded by his application.
The capability of implementing controller-based snapshots and clones affordably brings enterprise-class functionality into smaller
departments, remote locations, and small but growing companies.
The MSA2000sa is a member of HP StorageWorks Modular Smart Array offerings, delivering simple and affordable storage
technology to meet today's demanding and growing IT needs. These storage solutions offer excellent price/performance and
availability features for direct attach environments, small clusters, workgroups and entry-level SAN environments. Each solution is
designed to be easy to deploy, secure, with low management costs, while driving rapid return on investment.
MSA2000fc
MSA2000fc
MSA2000fcMSA2000fc
DA - 13045 Worldwide — Version 1 — July 14, 2008
Page 1
QuickSpecs
Models
Models
Models
ModelsModels
HP StorageWorks
HP StorageWorks
HP StorageWorksHP StorageWorks
MSA2000sa Modular
MSA2000sa Modular
MSA2000sa ModularMSA2000sa Modular
Smart Array
Smart Array
Smart ArraySmart Array
HP StorageWorks 2012sa Single Controller Modular Smart Array
HP StorageWorks 2012sa Dual Controller Modular Smart Array
HP StorageWorks 2000sa Modular Smart Array Controller
HP StorageWorks MSA2000 Single I/O 3.5 in 12 Drive Enclosure (w/ two .6m SAS
cables)
HP StorageWorks MSA2000 Dual I/O 3.5 inch 12 Drive Enclosure (w/ two .6m SAS
cables)
HP StorageWorks MSA2000 Drive Enclosure I/O Module
Highly efficientHighly efficient
consolidation and sharing
consolidation and sharing
consolidation and sharingconsolidation and sharing
of storage
of storage
of storageof storage
Flexibility in drives
Flexibility in drives
Flexibility in drivesFlexibility in drives
(MSA2000 family-
(MSA2000 family-
(MSA2000 family-(MSA2000 familyspecific)
specific)
specific)specific)
Cost efficient plus high-
Cost efficient plus high-
Cost efficient plus high-Cost efficient plus highavailability choices
availability choices
availability choicesavailability choices
Customer Benefits
Customer Benefits
Customer BenefitsCustomer Benefits
The HP StorageWorks 2000 Modular Smart Array family manages growing storage requirements across multiple HP ProLiant
servers for customers who need a centralized dedicated storage solution for applications. Shared storage allows for
controlled, cost-effective growth and increased protection of data.
Its ease of management allows a department or small company to effectively handle growing storage requirements with a
minimum of complexity.
The MSA2000sa extends the benefits of shared storage resources to first time implementers on a tight budget
The modular design allows the user to start relatively small but supports future growth to hundreds of users and up to 14.4TB
of SAS or 48TB of SAS storage
The optional controller-based snapshot and clone capability as part of the MSA2000 family allows the smaller departmental
user or company to implement functionality once only available to much larger firms with expensive arrays.
Geared to departmental and small to medium business requirements
Grows as the storage demands increase - up to 48 drives and 14.4TB SAS or 48TB SATA
Supports up to 4 hosts with SAS direct connect along with support for 256 LUNs and LUN sizes up
to 16TB
Optional controller-based snapshot and clone capability for increased data protection
Enterprise-class SAS or archival-class SATA drives as the need and budget dictate
Dual-ported SAS drives for enterprise needs
Large capacity SATA drives for inexpensive archival storage
Able to mix SAS and SATA drives within the same drive enclosure
Choose either single (future upgradeable) or dual controller array models
Choice of low cost single I/O or high-availability dual I/O drive enclosure models.
HP MSA2000sa Models At a Glance:HP MSA2000sa Models At a Glance:
High performance Modular Smart Array controller with two 3Gb SAS ports
Single and dual controller models
MSA2012sa models utilize Celeron 566MHz processor(s)
1 GB transportable cache per controller - battery-free cache backup with super capacitors and compact flash
256 LUNs with 16TB LUNs supported
2U rack mount chassis combining both the controller and disk shelf
Twelve 3.5 inch dual-ported SAS or SATA MSA2000-specific drives (supports mixing of drive types in a single shelf)
Support expansion to 3 additional enclosures & total of 48 disk drives
Redundant power supplies and fans are standard
RAID levels 0, 1, 3, 5, 6, 10, 50
Non-disruptive on-line controller code upgrade
Heterogeneous support for 32- bit and 64-bit Windows, Red Hat and SuSE
Qualified and certified for Windows and Linux clustering
Optional controller-based snapshot and clone functionality
CapacityCapacity
Minimum / with maximum
additional drive
enclosures
Controller Cache
Controller Cache
Controller CacheController Cache
Host connect
Host connect
Host connectHost connect
MSA2000 has 1 or 2
controllers, EVA has 2
controllers standard
Maximum Drives
Maximum Drives
Maximum DrivesMaximum Drives
Maximum host supported
Maximum host supported
Maximum host supportedMaximum host supported
Snapshot, remote
Snapshot, remote
Snapshot, remoteSnapshot, remote
replication
replication
replicationreplication
Use for Storage
Use for Storage
Use for StorageUse for Storage
*maximum available storage capacity depends on the RAID level being implemented, and is based on maximum number of LUNs
and LUN size
Product Technology
Product Technology
Product TechnologyProduct Technology
(raw)
MSA2000sa
MSA2000sa
MSA2000saMSA2000sa
3.6TB SAS or 12TB SATA
w/ 3 enclosures:
14.4TB SAS or 48TB
SATA
1GB per controller
Two 3Gb
SAS ports
per controller
48484896
4
Snapshot, cloneSnapshot, cloneSnapshot, clone
Primary Storage with SAS
Secondary with SATA
SAS
SAS
SASSAS
Modular Chassis
Modular Chassis
Modular ChassisModular Chassis
Drives available
Drives available
Drives availableDrives available
Scalability
Scalability
ScalabilityScalability
LUNs
LUNs
LUNsLUNs
RAID 0, 1, 3, 5, 6, 10,
RAID 0, 1, 3, 5, 6, 10,
RAID 0, 1, 3, 5, 6, 10,RAID 0, 1, 3, 5, 6, 10,
50
50
5050
MSA2000fc
MSA2000fc
MSA2000fcMSA2000fc
3.6TB SAS or 12TB SATA
w/ 3 enclosures:
14.4TB SAS or 48TB
SATA
1 GB per controller1 GB per controller2 GB per controller
Two 4Gb
Fibre Channel ports
per controller
6416
Primary Storage with SAS
Secondary with SATA
Two 3Gb host ports per controller
2U, 12 Large Form Factor drive bays, accommodating MSA2 SAS and SATA
hard drives (MSA2000-specific). Comes standard with one or two controllers.
Serial Attached SCSI (SAS) enterprise-class drives designed for high volume,
24x7 usage. Serial-ATA (SATA) are usually reserved for archival of data as
they are both relatively inexpensive and are available in very large capacities.
The MSA2000 family of arrays can accommodate both SAS and SATA drives
within the same enclosure making it ideal to have both business-critical, high
activity files on SAS drives while using snapshot or clone capability to keep
back-up data on the less expensive drives. SAS drive performance can be
approximately 30%greater than SATA performance on sequential host IO.
SAS performance excels in sequential lower latency response time and
random IO per second transaction performance due to higher rpm disk
speeds yielding lower seek times.
NOTE:
NOTE:
MSA2 3.5 inch Large Form Factor (LFF) drives are for use only in the
NOTE:NOTE:
MSA2000 family.
Up to 3.6TB SAS or 12TB SATA, expandable to 14.4TB SAS or 48TB SATA
with the addition of a maximum of three MSA2000 3.5 inch Disk Enclosures.
The MSA2000 family of arrays supports 256 LUNs and LUN sizes up to
16TB. The arrays support LUN expansion and deletion of any LUN.
In addition to the usual RAID levels, the MSA2000 family features several
important additional levels. RAID 6 is the highest level of RAID protection. It
allocates two sets of parity data across drives and allows simultaneous write
operations. It can withstand two simultaneous drive failures without downtime
or data loss. RAID 10 is mirroring and striping without parity. It is the most
popular of the multiple RAID levels, allowing large arrays with high
performance in most cases and superior fault tolerance. RAID 50 combines
MSA2000i
MSA2000i
MSA2000iMSA2000i
3.6TB SAS or 12TB SATA
w/ 3 enclosures:
14.4TB SAS or 48TB
Two 1GbE
iSCSI ports
per controller
Primary Storage with SAS
Secondary with SATA
SATA
EVA4400
EVA4400
EVA4400EVA4400
3.6TB FC or 12TB FATA
w/ 8 enclosures
43TB FC or 96 TB FATA
Two 4Gb
Fibre Channel ports
per controller
512
Snapshot, clone,
remote data replication
Primary Storage with
Fibre Channel Secondary
with FATA
DA - 13045 Worldwide — Version 1 — July 14, 2008
Page 5
QuickSpecs
Family Information
Configuration and
Configuration and
Configuration andConfiguration and
Management Tools
Management Tools
Management ToolsManagement Tools
Hot Plug Expansion and
Hot Plug Expansion and
Hot Plug Expansion andHot Plug Expansion and
Replacement Support
Replacement Support
Replacement SupportReplacement Support
Snapshot and Clone
Snapshot and Clone
Snapshot and CloneSnapshot and Clone
Overview
Overview
OverviewOverview
Server Compatibility
Server Compatibility
Server CompatibilityServer Compatibility
The MSA2000sa comes integrated with web browser based software for storage and RAID management,
setup, configuration and troubleshooting. This reduces the cost of ownership by reducing the training
and technical expertise necessary to install and maintain your HP storage solution.
the block striping and parity of RAID 5 with the straight block striping of RAID
0, yielding higher performance than RAID 5 through the addition of RAID 0,
particularly during writes.
HP StorageWorks MSA Storage Management Utility (SMU), Management
access, out-of-band: WEB GUI, CLI. Interface Types: Mini DB9 RS232,
10/100 Ethernet Protocols Supported SNMP, SSL, SSH, SMTP, HTTP, Telnet
The MSA2000sa supports hot plug expansion and replacement of redundant
controllers, fans, power supplies, and I/O modules for simple, fast
installation and maintenance.
Optional controller based functionality. Offers higher levels of data
protection, enabling an almost instant recovery from data failure or
corruption. Offers alternative development testing of 'offline' production data
and the ability to backup snapped/cloned data
Industry Standard X86
Industry Standard X86
Industry Standard X86Industry Standard X86
servers support
HP ProLiant DL, ML
Supports most multi-vendor industry standard 32-bit Intel and AMD based (x86) servers. HP
requires the Third-Party Server to be logo'd and listed on the Microsoft Windows Server Catalog.
Refer to the Microsoft website:
HP StorageWorks Division recommends that the Third-Party Server Vendor is an active member of
TSANet. Refer to the TSANet website for details:
Microsoft Windows Server 2008
Microsoft Windows Server 2003 and 2003 R2 (32/64)
Red Hat Linux 5 (32/64)
SuSE 10 (32/64)
VMware ESX 3.5 (32/64)
Microsoft Cluster Service for Microsoft Windows Server 2008 and 2003
SteelEye's LifeKeeper for Linux on , Red Hat Enterprise Linux AS 5 and SuSE Linux Enterprise Server
10 (supported with ProLiant servers only)
MSA2000sa supports target based management, and requires a web browser for management.
Only Microsoft Internet Explorer V6.X and above, and Mozilla Firefox 1.0.7 or later are supported
http://www.microsoft.com/windows/catalog/server/
www.tsanet.com
DA - 13045 Worldwide — Version 1 — July 14, 2008
Page 6
QuickSpecs
Optional Software
Optional Software
Optional Software
Optional SoftwareOptional Software
MSA2000 Snapshot and
MSA2000 Snapshot and
MSA2000 Snapshot andMSA2000 Snapshot and
Volume Copy Software
Volume Copy Software
Volume Copy SoftwareVolume Copy Software
Path Failover (MPIO)
Path Failover (MPIO)
Path Failover (MPIO)Path Failover (MPIO)
Product Features
Product Features
Product FeaturesProduct Features
Data Protection
Data Protection
Data ProtectionData Protection
Snapshots create up to 64 point-in-time pictures of data
Volume Copies create up to 128 point-in-time copies of data
Recovery is instant - revert data from any previous Snapshot or Volume Copy
Backup 'snapped' data to disk, virtual tape, or physical tape without a backup window
Data Testing
Data Testing
Data TestingData Testing
Snap or clone data to test the performance of a software application on 'offline' production data
Snap or clone data to test how a software patch or enhancement will function on 'offline;
production data
HP StorageWorks 2000 Modular Smart Array Snapshot 64 Software LTU
HP StorageWorks 2000 Modular Smart Array Snapshot 8 Software LTU
HP StorageWorks 2000 Modular Smart Array Snapshot 8 to 64 Upgrade Software
MPIO Failover for Windows provides a single multi-path solution for HP StorageWorks MSA2000sa
Modular Smart Array on HP ProLiant servers by providing basic path failover. Supports Windows 2008,
Windows 2003, Windows 2003 R2, and Windows 2003 X64 operating systems.
HP StorageWorks Storage Mirroring Software provides host-based, continuous replication for customers
seeking a low-cost alternative to fabric or array-based replication. Patented replication and failover
technology continuously captures byte-level data changes as they happen and replicates those changes
to one or more target servers at any location without geographic limitations. By replicating only the bytes
that change, Storage Mirroring Software uses the absolute minimum bandwidth on your existing LAN or
WAN to replicate your data. Storage Mirroring also provides server failover where a production server
can automatically be 'replaced' by the storage mirroring server in the event of failure. Couple Storage
Mirroring with MSA2000 Snapshots and/or Volume Copy to achieve an Enterprise class data protection
strategy creating different data recovery points using continuous data protection with Storage Mirroring
and point-in-time data protection with Snapshots and/or Volume Copy.
Storage Mirroring Software supports:
Any DAS, NAS, and SAN storage device.
Any Windows ProLiant server including all ML, DL, and BL platforms
Many Windows platforms including Windows Server 2000, Windows Server 2003, Windows
Server 2003 R2, Windows Storage Server 2003, Windows Storage Server 2003 R2, 64-bit
Windows, and Windows on Itanium
For more information visit:
StorageWorks Storage Mirroring Media Kit v5