HP 1950 24G User Manual

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Overview

1

HPE OfficeConnect 1950 Switch Series

Models

HPE OfficeConnect 1950 12XGT 4SFP+ Switch

JH295A

HPE OfficeConnect 1950 24G 2SFP+ 2XGT Switch

JG960A

HPE OfficeConnect 1950 48G 2SFP+ 2XGT Switch

JG961A

HPE OfficeConnect 1950 24G 2SFP+ 2XGT PoE+ Switch

JG962A

HPE OfficeConnect 1950 48G 2SFP+ 2XGT PoE+ Switch

JG963A

Key features

• 10G Connectivity for fast network to servers and storage

Product overview

The HPE OfficeConnect 1950 Series is a smart Web-managed 10-Gigabit and Gigabit platform for advanced small business
networks needing highest performance now or in the future.

• Combination of SFP+ and 10GBASE-T ports—supports both fiber and cost-effective copper connectivity

• True stacking allows for redundancy while simplifying administration

• Customized operation using intuitive Web interface

• Limited Lifetime warranty

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Overview

2

The HPE OfficeConnect 1950 Switch Series includes five switches: New to the series is a 16-port 10-Gigabit aggregation switch
that has 12 10GBASE
Additional series models have Gigabit access ports with 10
and 48
cabling, and two 10G SFP+ ports for fiber connectivity. The PoE+ models both have a PoE power budget of 370 W to power up
PoE/PoE+ compliant client devices.

The HPE OfficeConnect 1950 Switch S
supports true-stacking, the aggregation switch supporting up to two devices, while the access switches allowing up to four devices,
to be logically administered as
support both rack mounting and desktop operation. These switches have IPv4 and IPv6 operation, with Layer 2 switching as well
as Layer 3 static routing. Other

802.1X network login for enhanced security; and three versions of Spanning Tree Protocol (STP) for added network resiliency.
HPE OfficeConnect 1950 Switch Series
replacement with next business day shipment in most countries, limited 24x7 telephone support available from HPE for the first 90
days, and limited electronic and business hours telephone support is available from HPE for the entire warranty period.

Features and benefits

Management

50

acilitates remote management of the switch, as the device can be discovered and monitored from an SNMP management

-T and 4 SFP+ ports, which is ideal as the core of a high performance workgroup or small business network.

-Gigabit uplinks, including two standard and two PoE+ models in 24-

-port configurations. The access switches each have two 10GBASE-T ports supporting copper- based Category 6A-based

eries has an intuitive Web-based interface for simple customization of network operation. It

a single entity, simplifying administration while supporting greater network redundancy. Models

features include: link aggregation to boost link performance; VLANs, Access Control Lists, and

includes a Limited Lifetime Warranty. This warranty provides advance hardware

simplifies administration of multiple devices. Create a single logical managed unit with up to four HPE OfficeConnect 19
switches. Balance connections across multiple units with standard Link Aggregation (LACP) for enhanced network
resiliency. Stack using affordable Cat 6a, or long distance fiber, or localized DAC cables. Stacked units can be co-located or

• Four-high true stacking

separated physically.

• Intuitive Web browser-based management

allows for easy customization of the switch even by non-technical users.

• Secure Web-management sessions with HTTPS / SSL

encrypts and otherwise protects management sessions through HTTP Secure (HTTPS). Prevents snooping of sensitive
management information such as passwords.

• SNMPv1, v2c, and v3

f
station

• Complete session logging

provides detailed information for problem identification and resolution

• Dual flash images

provides independent primary and secondary operating system files for backup while upgrading

• Port mirroring

enables traffic on a port to be simultaneously sent to a network analyzer for monitoring

• Network Time Protocol (NTP)

synchronizes timekeeping among distributed time servers and clients; keeps timekeeping consistent among all clock­dependent devices within the network so that the devices can provide diverse applications based on the consistent time

• IEEE 802.1AB Link Layer Discovery Protocol (LLDP)

advertises and receives management information from adjacent devices on a network, facilitating easy mapping by
network management applications

• Limited Command Line Interface (CLI)

facilitates in the deployment and initial configuration of the unit. Supports troubleshooting actions as well.

• RMON

provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events

• Default DHCP client modes

simplifies device deployment. Connect a new out-of-the box switch to a network with a DHCP server and the device will
obtain its IP address automatically with plug-and-play operation. In the absence of a DHCP server, the switch will fall-back
to a unique static address determined by the switch's MAC address.

• Cable diagnostic tool

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Overview

3

use to remotely detect cable issues with cables attached to the switch.

Quality of Service (QoS)

sensitive traffic ahead of less important traffic. Use with VoIP or video

Connectivity

pagated through the network to prevent packet loss at a congested

ransfers by allowing more data into a given packet. This especially useful for transfers of large

PoE+ models are fully backward compliant with the older PoE standard which provides up to 15.4 Watts of PoE power per

• Broadcast control

allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic

• Rate limiting

sets per-port ingress enforced maximums and per-port, per-queue minimums

• Traffic prioritization

makes it possible to prioritize important and/or time­to optimize its performance on the network. Recognizes both IEEE 802.1p and DSCP prioritization tagging. Packets are
mapped to four hardware queues for more effective throughput.

• Powerful QoS feature

supports the following congestion actions: strict priority queuing (SP), weighted round robin (WRR) queuing, and
SP+WRR

• Auto-MDI/MDIX

adjusts automatically to straight-through or crossover cables on all 10/100/1000 and 10GBASE-T ports.

• IEEE 802.3X flow control

provides a configurable flow throttling mechanism pro
node.

• Packet storm protection

protects against broadcast, multicast, or unicast storms with user-defined thresholds

• Jumbo frame support up to 10-kilobyte frames

improves efficiency of data t
amounts of data. HPE 1950 Switches support up to 10 kilobyte frame sizes.

• IEEE 802.3at Power over Ethernet (PoE+)

delivers power to compliant devices over Ethernet cabling, greatly simplifying installation of those devices. The HPE
OfficeConnect 1950 Series has two PoE+ enabled models. The PoE+ 802.3at standard supports delivery of up to 30
Watts of power to the attached devices, enough to support the latest models of IP phones, Wireless Access Points, video
surveillance cameras, or other PoE/PoE+ enabled devices. HPE 1950 PoE+ models support 370W of total PoE power.

• IEEE 802.3af Power over Ethernet (PoE) ready

delivers power to compliant devices over Ethernet cabling, greatly simplifying installation of those devices. HPE 1950

• Available redundant power for PoE+ models

• Fully IPv6 capable

port to attached devices.

optional Redundant Power System is available to add power redundancy and to supplement the PoE power of the PoE+
switches. With the optional RPS, the PoE+ power budget can be increased to 740 Watts; additionally, the switch will
continue operating and powering downstream PoE devices even if the unit internal power supply should fail. Order the
HPE RPS1600 Redundant Power System (JG136A).

- IPv6 host

enables switches to be managed and deployed at the IPv6 network's edge

- IPv6 routing

supports IPv6 static routes

- MLD snooping

forwards IPv6 multicast traffic to the appropriate interface, preventing traffic flooding

- IPv6 ACL/QoS

supports ACL and QoS for IPv6 network traffic

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Overview

4

Security

Performance

allows for increased performance by selecting the number of queues and associated memory buffering that best meet the

rs. Fiber is particularly suited for connecting at distances

based Cat 5e cabling. Alternatively use the SFP+ ports for redundant stacking

Layer 2 switching

• Access Control Lists (ACLs)

gives granular control over what traffic goes where in the network. Allows for traffic filtering. ACLs rules can be based on
MAC-address or IP-address. ACL rules can be time-based to implement access control during certain hours or days.

• IEEE 802.1X and RADIUS network logins

controls port-based access for authentication and accountability
Automatic VLAN assignment
assigns users automatically to the appropriate VLAN based on their identity, location and time of day

• Port isolation

the port isolation feature isolates Layer 2 traffic for data privacy and security without using VLANs. This feature can also
be used to isolate the hosts in a VLAN from one another

• ARP attack protection

the ARP detection feature enables access devices to block ARP packets from unauthorized clients to prevent user
spoofing and gateway spoofing attacks

• STP BPDU port protection

blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks

• STP root guard

protects the root bridge from malicious attacks or configuration mistakes

• Automatic denial-of-service protection

protects the network by blocking malicious DoS attacks aimed at the switch itself.

• Management password

provides security so that only authorized access to the Web browser interface is allowed

• Half-/full-duplex auto-negotiating capability on every port

doubles the throughput of every port

• Selectable queue configurations

requirements of the network applications

• IGMP / MLD Snooping

improves network performance by filtering multicast traffic when there is no multicast receiver on a connection. Without
this, multicast traffic is flooded to all ports. IGMP snooping is used in IPv4 networks. The IPv6 equivalent MLD Snooping is
also supported.

• 10-Gigabit SFP+ based Fiber Uplinks

supports high-bandwidth connections over fiber. HPE 1950 Switches each have two SFP+ transceiver slots supporting
10-Gigabit fiber-based connections using optional 10G transceive
beyond the 100 Meter limitation of copper­of up to four units using Direct Attached Cables (DAC).

• 10-Gigabit 10GBASE-T RJ45 Uplinks

supports high-bandwidth connections over Cat 6a cabling. HPE 1950 Switches each have two 10GBASE-T RJ45 ports
supporting 10-Gigabit copper-based connections. Cat 6a is economical and practical for distances up to 100 meters.
Alternatively use the 10GBASE-T ports for redundant stacking of up to four units.

• VLAN support and tagging

supports IEEE 802.1Q with 4,094 simultaneous VLAN IDs

• Spanning Tree Protocol (STP)

supports standard IEEE 802.1D STP, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) for faster convergence, and
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)

• BPDU filtering

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Overview

5

improves network efficiency by filtering unnecessary BPDU packets on a port. When Spanning Tree Protocol (STP) is

Layer 3 services

determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection

Layer 3 routing

Resiliency and high availability

bandwidth connection to the network backbone; helps prevent traffic bottlenecks. The switch supports

Convergence

LLDP that stores values for parameters such as QoS and VLAN to configure automatically

Additional information

Warranty and suppor

shipment in most countries, 24x7 phone support available for the first 90 days, and electronic and business hours phone

enabled globally but disabled on specific ports, BPDU packets are not sent out the ports where STP is disabled.

• Address Resolution Protocol (ARP)

of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a
Layer 2 network

• DHCP relay

simplifies management of DHCP addresses in networks with multiple subnets

• Static IPv4/IPv6 routing

provides basic routing (supporting up to 32 static routes and 8 virtual VLAN interfaces); allows manual routing
configuration

• Link aggregation

groups together up to 8 ports per trunk automatically using Link Aggregation Control Protocol (LACP), or manually, to
form an ultra-high­up to 128 trunks.

• LLDP-MED (Media Endpoint Discovery)

defines a standard extension of
network devices such as IP phones

• Auto voice VLAN

recognizes IP phones and automatically assigns voice traffic to dedicated VLAN for IP phones

• PoE Models For Converged Voice / Data Networks

simplifies and lowers the cost of installing a converged infrastructure. Power IP phones, Access Points, Video Surveillance
cameras, or other PoE-enabled devices. HPE 1950 Switches support multiple methods of allocating PoE power -- IEEE

802.3af class, LLDP-MED, or user-specified -- for more efficient energy useage.

• Green initiative support

provides support for RoHS and WEEE regulations

• Green IT and power

improves energy efficiency through the use of the latest advances in silicon development; shuts off unused ports and
utilizes variable-speed fans, reducing energy costs

• Energy Efficient Ethernet

compliant with IEEE 802.3az standard requirements to save energy during periods of low data activity

• Limited Lifetime Warranty

This series comes with a Limited Lifetime Warranty providing advance hardware replacement with next business day

t

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Overview

6

support for the entire warranty period. See http://www.hpe.com/networking/warrantysummary for full warranty and

support information included with your product purchase.

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Configuration

7

Build To Order

Shippable solution.

HPE OfficeConnect 1950 24G 2SFP+ 2XGT Switch

JG960A

•

•

See Configuration

PDU Cable NA/MX/TW/JP

JG960A#B2B

• C15 PDU Jumper Cord (NA/MX/TW/JP)

PDU Cable ROW

JG960A#B2C

• C15 PDU Jumper Cord (ROW)

No Power Cord

JG960A#AC3

• No Localized Power Cord Selected

HPE OfficeConnect 1950 48G 2SFP+ 2XGT Switch

JG961A

•

• 1U - Height

See Configuration

PDU Cable NA/MX/TW/JP

JG961A#B2B

• C15 PDU Jumper Cord (NA/MX/TW/JP)

PDU Cable ROW

JG961A#B2C

• C15 PDU Jumper Cord (ROW)

No Power Cord

JG961A#AC3

•

HPE OfficeConnect 1950 24G 2SFP+ 2XGT PoE+ Switch

JG962A

•

• 1U - Height

See Configuration

PDU Cable NA/MX/TW/JP

JG962A#B2B

• C15 PDU Jumper Cord (NA/MX/TW/JP)

PDU Cable ROW

JG962A#B2C

• C15 PDU Jumper Cord (ROW)

: BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-

24 RJ-45 auto-negotiating 10/100/1000 ports

• 2 SFP+ fixed 1000/10000 SFP+ ports

• min=0 \ max=2 SFP+ Transceivers

• 2 RJ-45 1/10GBASE-T port

1U - Height

NOTE:1, 2

48 RJ-45 auto-negotiating 10/100/1000 ports

• 2 SFP+ fixed 1000/10000 SFP+ ports

• min=0 \ max=2 SFP+ Transceivers

• 2 RJ-45 1/10GBASE-T ports

No Localized Power Cord Selected

24 RJ-45 auto-negotiating 10/100/1000 PoE+ ports

• 2 SFP+ fixed 1000/10000 SFP+ ports

• min=0 \ max=2 SFP+ Transceivers

• 2 RJ-45 1/10GBASE-T ports

NOTE:1, 2

NOTE:1, 2

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Configuration

8

No Power Cord

JG962A#AC3

• No Localized Power Cord Selected

HPE OfficeConnect 1950 48G 2SFP+ 2XGT PoE+ Switch

JG963A

•

• 1U - Height

See Configuration

PDU Cable NA/MX/TW/JP

JG963A#B2B

• C15 PDU Jumper Cord (NA/MX/TW/JP)

PDU Cable ROW

JG963A#B2C

• C15 PDU Jumper Cord (ROW)

No Power Cord

JG963A#AC3

• No Localized Power Cord Selected

HPE 1950 12XGT 4SFP+ Switch

JH295A

•

• 1U - Height

See Configuration

PDU Cable NA/MX/TW/JP

JH295A#B2B

• C15 PDU Jumper Cord (NA/MX/TW/JP)

PDU Cable ROW

JH295A#B2C

• C15 PDU Jumper Cord (ROW)

No Power Cord

JH295A#AC3

•

Configuration Rules:

Note 1

The following Transceivers install into this switch:

HPE X121 1G SFP LC SX Transceiver

J4858C

HPE X121 1G SFP LC LX Transceiver

J4859C

HPE X121 1G SFP RJ45 T Transceiver

J8177C

HPE X120 1G SFP LC SX Transceiver

JD118B

HPE X120 1G SFP LC LX Transceiver

JD119B

HPE X120 1G SFP RJ45 T Transceiver

JD089B

HPE X130 10G SFP+ LC SR Transceiver

JD092B

HPE X130 10G SFP+ LC LR Transceiver

JD094B

HPE X132 10G SFP+ LC SR Transceiver

J9150A

HPE X132 10G SFP+ LC LR Transceiver

J9151A

HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable

JD095C

48 RJ-45 auto-negotiating 10/100/1000 PoE+ ports

• 2 SFP+ fixed 1000/10000 SFP+ ports

• min=0 \ max=2 SFP+ Transceivers

• 2 RJ-45 1/10GBASE-T ports

NOTE:1, 2

12 RJ-45 1/10GBASE-T ports

• 4 SFP+ fixed 1000/10000 SFP+ ports

• min=0 \ max=4 SFP+ Transceivers

No Localized Power Cord Selected

NOTE:1, 2

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Configuration

9

HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable

JD096C

HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

JD097C

HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable

JG081C

Note 2

Localization (Wall Power Cord) required on orders without #B2B or #B2C (PDU Power Cord). (See
Localization Menu)

Remarks:

Drop down under power supply should offer the following options and results:
Switch/R
#B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord
Level CTO)

Transceivers

SFP Transceivers

HPE X121 1G SFP LC SX Transceiver

J4858C

HPE X121 1G SFP LC LX Transceiver

J4859C

HPE X121 1G SFP RJ45 T Transceiver

J8177C

HPE X120 1G SFP LC SX Transceiver

JD118B

HPE X120 1G SFP LC LX Transceiver

JD119B

HPE X120 1G SFP RJ45 T Transceiver

JD089B

SFP+ Transceivers

HPE X130 10G SFP+ LC SR Transceiver

JD092B

HPE X130 10G SFP+ LC LR Transceiver

JD094B

HPE X132 10G SFP+ LC SR Transceiver

J9150A

HPE X132 10G SFP+ LC LR Transceiver

J9151A

HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable

JD095C

HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable

JD096C

HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

JD097C

HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable

JG081C

Cables

Multi-Mode Cables

HPE LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable

AJ833A

HPE LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable

AJ834A

HPE LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable

AJ835A

HPE LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable

AJ836A

HPE LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable

AJ837A

HPE LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable

AJ838A

HPE LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable

AJ839A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable

QK732A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable

QK733A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable

QK734A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable

QK735A

outer/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or

- Localized Option (Watson Default for BTO and Box

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Configuration

10

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable

QK736A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable

QK737A

Switch Enclosure Options

External/Redundant Power Supplies

HPE RPS1600 Redundant Power System

JG136A

•

• includes 1 x c13, 1600w and Power Supply port

See Configuration

HPE RPS1600 1600W AC Power Supply

JG137A

•

See Configuration

NOTE:1, 3

HPE RPS 800 Redundant Power Supply

JD183A

•

See Configuration

NOTE: 2, 5

Configuration Rules:

Note 1

If this power supply is selected, The JG136A - HPE A-RPS1600 Redundant Power System must be on
order or onsite.

Note 2

Localization required.

Note 3

Each switch will only support 1 JG136A and 1 JG137A Power supply systems.

Note 4

This power supply only supported on switches JG962A and JG963A.

Note 5

This power supply is only supported on switch JH295A

External/Redundant Power Cables

HPE X290 1000 A JD5 2m RPS Cable

JD187A

See Configuration

NOTE:

HPE X290 500/800 1m RPS Cable

JD190A

See Configuration

NOTE:2

Remarks:

These cables are used to connect the External Power System to Switch.

Configuration Rules:

Note 1

This Cable is only supported on switches JG962A and JG963A when used with the RPS 1600 (JG136A)

Note 2

This Cable is only supported on switch JH295A when used with the RPS 800 (JD183A)

Height = 1U

NOTE:2, 3, 4

Installs into JG136A only

Installs into JH295A only

1

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Configuration

11

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Technical Specifications

12

HPE OfficeConnect 1950 12XGT 4SFP+ Switch (JH295A)

I/O ports and slots

12 RJ-45 1/10GBASE-T ports

4 SFP+ fixed 1000/10000 SFP+ ports

Additional ports and
slots

1 dual-personality (RJ-45 or Mini USB) console port to access limited CLI port

Physical characteristics

Dimensions

17.32(w) x 6.3(d) x 1.73(h) in (44 x 16 x 4.4 cm) (1U height)

Weight

8.07 lb (3.66 kg)

Memory and processor

Cortex-A9 @ 1.25 MHz, 512 MB flash; Packet buffer size: 2 MB, 1 GB SDRAM

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)

Performance

100 Mb Latency

< 5 µ

1000 Mb Latency

< 5 µs

10 Gbps Latency

< 5 µ

Throughput

up to 238 Mpps (64-byte packets)

Routing/Switching
capacity

320 Gbps

Routing table size

512 entries (IPv4), 256 entries (IPv6)

MAC address table size

16384 entries

Reliability

MTBF (years)

81.8

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative

10% to 90%, noncondensing

Nonoperating/Storage
temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage
relative humidity

5% to 95%, noncondensing

Altitude

up to 16,404 ft (5 km)

Acoustic

Low-speed fan: 48.1 dB, High-speed fan: 59.8 dB; ISO 7779 Dual speed fan

Electrical characteristics

Frequency

50/60 Hz

Voltage

100 - 240 VAC, rated

Maximum power rating

75 W

Notes

Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.

Safety

UL 60950; IEC 60950-1; EN 60950-1; GB 4943.1

Emissions

FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2
2000, 61000-3-3; ICES-003 Class A

Management

IMC - Intelligent Management Center; Limited command-line interface; Web browser; SNMP manager;

documentation for MIB support details.

Notes

Transceivers under accessories are recommended versions.
Here is the list of fully supported transceivers. 10G SFP+: JD092B, JD093B, JD094B, JG234A, J9150A,
J9151A, J9152A, J9153A. GE SFP: JD118B, JD119B, JD089B, J4858C, J4859C, J8177C

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for

1 RJ-45 out-of-band management port

s

s

humidity

HTTPS; RMON1; FTP; Supported by HP IMC and generic SNMP management platforms. Refer to

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Technical Specifications

13

details on the service-level descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE OfficeConnect 1950 24G 2SFP+ 2XGT Switch (JG960A)

I/O ports and slots

24 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

2 SFP+ fixed 1000/10000 SFP+ ports

2 RJ-45 1/10GBASE-T ports

Additional ports and
slots

1 RJ-45 console port to access limited CLI port

Physical characteristics

Dimensions

17.17(w) x 6.3(d) x 1.73(h) in (43.6 x 16 x 4.4 cm) (1U height)

Weight

6.61 lb (3 kg)

Memory and processor

128 MB flash; Packet buffer size: 1.5 MB, 1 GB SDRAM

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)

Performance

100 Mb Latency

< 5 µs

1000 Mb Latency

< 5 µ

10 Gbps Latency

< 1.5 µs

Throughput

up to 95.2 Mpps (64-byte packets)

Routing/Switching
capacity

128 Gbps

Routing table size

32 entries (IPv4), 32 entries (IPv6)

MAC address table size

16384 entries

Reliability

MTBF (years)

87.2

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative
humidity

10% to 90%, noncondensing

Nonoperating/Storage
temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage
relative humidity

5% to 95%, noncondensing

Altitude

up to 16,404 ft (5 km)

Acoustic

Low-speed fan: 19.0 dB, High-speed fan: 44.5 dB; ISO 7779 Dual speed fan

Electrical characteristics

Frequency

50/60 Hz

Voltage

100 - 240 VAC, rated

Maximum power rating

34 W

Notes

Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.

Safety

UL 60950; IEC 60950-1; EN 60950-1; GB 4943.1

Emissions

FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2
2000, 61000-3-3; ICES-003 Class A

Management

IMC - Intelligent Management Center; Limited command-line interface; Web browser; SNMP Manager;

documentation for MIB support details.

Notes

Transceivers under accessories are recommended versions. Here is the list of fully supported

s

HTTPS; RMON1; FTP; Supported by HPE IMC and generic SNMP management platforms. Refer to

transceivers. 10G SFP+: JD092B, JD093B, JD094B, JG234A, J9150A, J9151A, J9153A. GE SFP:

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Technical Specifications

14

JD118B, JD119B, JD089B, J4858C, J4859C, J8177C.

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for

times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE OfficeConnect 1950 48G 2SFP+ 2XGT Switch (JG961A)

I/O ports and slots

48 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T)

2 SFP+ fixed 1000/10000 SFP+ ports

2 RJ-45 1/10GBASE-T ports

Additional ports and
slots

1 RJ-45 console port to access limited CLI port

Physical characteristics

Dimensions

17.32(w) x 10.63(d) x 1.73(h) in (44 x 27 x 4.4 cm) (1U height)

Weight

11.02 lb (5 kg)

Memory and processor

128 MB flash; Packet buffer size: 3 MB, 1 GB SDRAM

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)

Performance

100 Mb Latency

< 5 µ

1000 Mb Latency

< 5 µ

10 Gbps Latency

< 1.5 µs

Throughput

up to 130.9 Mpps (64-byte packets)

Routing/Switching
capacity

176 Gbps

Routing table size

32 entries (IPv4), 32 entries (IPv6)

MAC address table size

16384 entries

Reliability

MTBF (years)

51

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative
humidity

10% to 90%, noncondensing

Nonoperating/Storage
temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage
relative humidity

5% to 95%, noncondensing

Altitude

up to 16,404 ft (5 km)

Acoustic

Low-speed fan: 38.4 dB, High-speed fan: 47.0 dB; ISO 7779 Dual speed fan

Electrical characteristics

Frequency

50/60 Hz

Voltage

100 - 240 VAC, rated

Maximum power rating

54 W

Notes

Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.

Safety

UL 60950; IEC 60950-1; EN 60950-1; GB 4943.1

Emissions

FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2
2000, 61000-3-3; ICES-003 Class A

Management

IMC - Intelligent Management Center; Limited command-line interface; Web browser; SNMP Manager;

documentation for MIB support details.

details on the service-level descriptions and product numbers. For details about services and response

s
s

HTTPS; RMON1; FTP; Supported by HPE IMC and generic SNMP management platforms. Refer to

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Technical Specifications

15

Notes

Transceivers under accessories are recommended versions. Here is the list of fully supported

JD118B, JD119B, JD089B, J4858C, J4859C, J8177C.

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for

times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE OfficeConnect 1950 24G 2SFP+ 2XGT PoE+ Switch (JG962A)

I/O ports and slots

24 RJ-45 auto-negotiating 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE, IEEE 802.3at)

2 SFP+ fixed 1000/10000 SFP+ ports

2 RJ-45 1/10GBASE-T ports

Additional ports and
slots

1 RJ-45 console port to access limited CLI port

Physical characteristics

Dimensions

17.32(w) x 14.17(d) x 1.73(h) in (44 x 36 x 4.4 cm) (1U height)

Weight

13.23 lb (6 kg)

Memory and processor

128 MB flash; Packet buffer size: 1.5 MB, 1 GB SDRAM

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)

Performance

100 Mb Latency

< 5 µs

1000 Mb Latency

< 5 µ

10 Gbps Latency

< 1.5 µs

Throughput

up to 95.2 Mpps (64-byte packets)

Routing/Switching
capacity

128 Gbps

Routing table size

32 entries (IPv4), 32 entries (IPv6)

MAC address table size

16384 entries

Reliability

MTBF (years)

44.4

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative
humidity

10% to 90%, noncondensing

Nonoperating/Storage
temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage
relative humidity

5% to 95%, noncondensing

Altitude

up to 16,404 ft (5 km)

Acoustic

Low-speed fan: 37.3 dB, High-speed fan: 47.1 dB; ISO 7779 Dual speed fan

Electrical characteristics

Frequency

50/60 Hz

Voltage

100 - 240 VAC, rated

Maximum power rating

425 W

PoE power

370 W PoE+

Notes

Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
PoE power is the power supplied by the internal power supply. It is
dependent on the type and quantity of power supplies and may be
supplemented with the use of an external power supply (EPS).
When supplemented with the use of an HPE RPS1600 Redundant Power

transceivers. 10G SFP+: JD092B, JD093B, JD094B, JG234A, J9150A, J9151A, J9153A. GE SFP:

details on the service-level descriptions and product numbers. For details about services and response

s

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Technical Specifications

16

System, up to 720W of PoE+ can be supplied. Unit max. power
consumption with RPS is 750W.

Safety

UL 60950; IEC 60950-1; EN 60950-1; GB 4943.1

Emissions

FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2
2000, 61000-3-3; ICES-003 Class A

Management

IMC - Intelligent Management Center; Limited command-line interface; Web browser; SNMP Manager;

documentation for MIB support details.

Notes

Transceivers under accessories are recommended versions. Here is the list of fully supported

JD118B, JD119B, JD089B, J4858C, J4859C, J8177C.

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for

times in your area, please contact your local Hewlett Packard Enterprise sales office.

HPE OfficeConnect 1950 48G 2SFP+ 2XGT PoE+ Switch (JG963A)

I/O ports and slots

48 RJ-45 auto-negotiating 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3af PoE, IEEE 802.3at)

2 SFP+ fixed 1000/10000 SFP+ ports

2 RJ-45 1/10GBASE-T ports

Additional ports and
slots

1 RJ-45 console port to access limited CLI port

Physical characteristics

Dimensions

17.32(w) x 16.54(d) x 1.73(h) in (44 x 42 x 4.4 cm) (1U height)

Weight

15.43 lb (7 kg)

Memory and processor

128 MB flash; Packet buffer size: 3 MB, 1 GB SDRAM

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)

Performance

100 Mb Latency

< 5 µs

1000 Mb Latency

< 5 µ

10 Gbps Latency

< 1.5 µs

Throughput

up to 130.9 Mpps (64-byte packets)

Routing/Switching

176 Gbps

Routing table size

32 entries (IPv4), 32 entries (IPv6)

MAC address table size

16384 entries

Reliability

MTBF (years)

26.8

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative
humidity

10% to 90%, noncondensing

Nonoperating/Storage
temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage
relative humidity

5% to 95%, noncondensing

Altitude

up to 16,404 ft (5 km)

Acoustic

Low-speed fan: 47.3 dB, High-speed fan: 50.0 dB; ISO 7779 Dual speed fan

Electrical characteristics

Frequency

50/60 Hz

Voltage

100 - 240 VAC, rated

Maximum power rating

470 W

HTTPS; RMON1; FTP; Supported by HPE IMC and generic SNMP management platforms. Refer to

transceivers. 10G SFP+: JD092B, JD093B, JD094B, JG234A, J9150A, J9151A, J9153A. GE SFP:

details on the service-level descriptions and product numbers. For details about services and response

s

capacity

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Technical Specifications

17

PoE power

370 W PoE+

Notes

Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure
with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
PoE power is the power supplied by the internal power supply. It is
dependent on the type and quantity of power supplies and may be
supplemented with the use of an external power supply
When supplemented with the use of an HP
System, up to 800W of PoE+ can be supplied. Unit max. power
consumption with RPS is 910W.

Safety

UL 60950; IEC 60950-1; EN 60950-1; GB 4943.1

Emissions

FCC part 15 Class A; VCCI Class A; EN 55022 Class A; CISPR 22 Class A; EN 55024; EN 61000-3-2
2000, 61000-3-3; ICES-003 Class A

Management

IMC - Intelligent Management Center; Limited command-line interface; Web browser; SNMP Manager;

documentation for MIB support details.

Notes

Transceivers under accessories are recommended versions. Here is the list of fully supported

JD118B, JD119B, JD089B, J4858C, J4859C, J8177C.

Services

Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for

times in your area, please contact your local Hewlett Packard Enterprise sales office.

Standards and protocols

Device management

RFC 2573 SNMP-Target MIB

(EPS).

E RPS1600 Redundant Power

HTTPS; RMON1; FTP;; Supported by HPE IMC and generic SNMP management platforms. Refer to

transceivers. 10G SFP+: JD092B, JD093B, JD094B, JG234A, J9150A, J9151A, J9153A. GE SFP:

details on the service-level descriptions and product numbers. For details about services and response

(applies to all products in
series)

RFC 2819 RMON

General protocols
IEEE 802.1D MAC Bridges
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1W Rapid Spanning Tree Protocol
IEEE 802.1X
IEEE 802.3 Type 10BASE-T
IEEE 802.3ab 1000BASE-T
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.3af Power over Ethernet
IEEE 802.3at PoE+
IEEE 802.3i 10BASE-T
IEEE 802.3x Flow Control
IEEE 802.3z 1000BASE-X

MIBs
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 2021 RMONv2 MIB
RFC 2233 Interface MIB
RFC 2233 Interfaces MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Notification MIB

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Technical Specifications

18

RFC 2613 SMON MIB

IEEE 802.1X Port Based Network Access Control

RFC 2618 RADIUS Client MIB
RFC 2620 RADIUS Accounting MIB
RFC 2665 Ethernet-Like-MIB
RFC 2667 IP Tunnel MIB
RFC 2668 802.3 MAU MIB
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2737 Entity MIB (Version 2)
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 3418 MIB for SNMPv3

Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1D (STP)
RFC 1215 SNMP Generic traps

QoS/Cos
IEEE 802.1p (CoS)

Security

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Accessories

19

HPE OfficeConnect 1950 Switch Series accessories

Transceivers

HPE X121 1G SFP LC SX Transceiver

J4858C

HPE X121 1G SFP LC LX Transceiver

J4859C

HPE X121 1G SFP RJ45 T Transceiver

J8177C

HPE X132 10G SFP+ LC SR Transceiver

J9150A

HPE X132 10G SFP+ LC LR Transceiver

J9151A

HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable

JD095C

HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable

JD096C

HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

JD097C

Cables

HPE LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable

AJ833A

HPE LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable

AJ834A

HPE LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable

AJ835A

HPE LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable

AJ836A

HPE LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable

AJ837A

HPE LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable

AJ838A

HPE LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable

AJ839A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable

QK732A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable

QK733A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable

QK734A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable

QK735A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable

QK736A

HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable

QK737A

HPE OfficeConnect 1950 12XGT 4SFP+ Switch (JH295A)

HPE RPS 800 Redundant Power Supply

JD183A

HPE X290 500/800 1m RPS Cable

JD190A

HPE OfficeConnect 1950 24G 2SFP+ 2XGT PoE+(370W) Switch (JG962A)

HPE RPS1600 Redundant Power System

JG136A

HPE RPS1600 1600W AC Power Supply

JG137A

HPE X290 1000 A JD5 2m RPS Cable

JD187A

HPE OfficeConnect 1950 48G 2SFP+ 2XGT PoE+(370W) Switch (JG963A)

HPE RPS1600 Redundant Power System

JG136A

HPE RPS1600 1600W AC Power Supply

JG137A

HPE X290 1000 A JD5 2m RPS Cable

JD187A

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Accessory Product Details

20

NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.

HPE X121 1G SFP LC SX
Transceiver

A small form
pluggable (SFP)
SX
transceiver that provides a
full-duplex Gigabit solution
up to 550 m on multimode
fiber.

Ports

1 LC 1000BASE-SX port; Duplex: full only

Physical characteristics

Dimensions: 2.24(d) x 0.54(w) x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)
Weight: 0.04
Transceiver form factor: SFP

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)

Operating relative humidity: 5% to 85%, noncondensing

Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)

Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 0.4 W

Power consumption maximum: 0.7 W

Cabling

Type:

Maximum distance:

Cable length: 2-550m

Fiber type: Multi Mode

Services

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.

HPE X121 1G SFP LC LX
Transceiver

HP X121 1G SFP LC LX
Transceiver: An
format
gigabit transceiver with LC
connectors using LX
technology.

Ports

1 LC 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX); Duplex: full
only

Physical characteristics

Dimensions: 2.24(d) x 0.54(w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm)
Weight:0.04 lb. (0.02 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)

Operating relative humidity: 0% to 85%, noncondensing

Nonoperating/Storage temperature: -40°F to 212°F (-40°C to 100°C)

Altitude: up to 10,000 ft. (3 km)

Cabling

Type:

mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2

(J4858C)

lb. (0.02 kg)

-factor
Gigabit

• 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-

index, low metal content, multimode fiber optic, complying with
ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively;

(J4859C)

SFP

• 2-220 m (62.5 µm core diameter, 160 MHz*km bandwidth

• 2-275 m (62.5 µm core diameter, 200 MHz*km bandwidth

• 2-500 m (50 µm core diameter, 400 MHz*km bandwidth)

• 2-550 m (50 µm core diameter, 500 MHz*km bandwidth)

for details on the service-

• Either single mode or multimode; 62.5/125 µm or 50/125 µm

(core/cladding) diameter, graded-index, low metal content,
multimode fiber optic, complying with ITU-T G.651 and ISO/IEC
793-2 Type A1b or A1a, respectively; Low metal content, single-

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Accessory Product Details

21

Type B1;

Maximum distance:

Notes

A mode conditioning patch cord may be needed in some multimode fiber
installations.
Wavelength: 1310nm
Power Consumption: < 500mW Typical

Services

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packar
sales office.

HPE X121 1G SFP RJ45

Ports

1 RJ-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T); Duplex: full
only

Physical characteristics

Dimensions: 2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4 cm)
Weight: 0.06 lb. (0.03 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C); with 100 LFM
airflow over the SFP module

Operating relative humidity: 0% to 95% @ 75°F (25°C), noncondensing

Nonoperating/Storage temperature: -40°F to 185°F (-40°C to 85°C)

Nonoperating/Storage relative humidity: 0% to 95% @ 77°F (25°C),
noncondensing

Altitude: up to 10,000 ft. (3000 km)

Cabling

Cable type:
1000BASE
4
balanced, complying with IEEE 802.3ab 1000BASE

Maximum distance:

Notes

Power consumption is nominally 1 watt.
For supported platforms and minimum software requirements to support
this product, see the document titled "Support for the J8177C 1000Base
T Mini
The J8177C Gigabit co
personality ports.
The J8177C is capable of 100 Mb operation. This is supported on only the
HPE E8200zl, E5400zl, and HPE E6200-24G-mGBIC yl Switches using

• 2-550 m (multimode 62.5 µm core diameter, 500 MHz*km

bandwidth)

• 2-550 m (multimode 50 µm core diameter, 400 MHz*km

bandwidth)

• 2-550 m (multimode 50 µm core diameter, 500 MHz*km

bandwidth)

• 2-10,000 m (single-mode fiber)

for details on the service-

d Enterprise

T Transceiver (J8177C)

HP X121 1G SFP RJ45 T
Transceiver: An SFP
format
gigabit transceiver with
RJ45 connectors using
1000BaseT technology.

-T: Category 5 (5E or better recommended), 100 Ù differential

-pair unshielded twisted pair (UTP) or shielded twisted pair (STP)

-T;

• 100 m

-GBIC" on the "HPE Mini-GBICs and SFPs" Manuals Web page.

-

pper mini-GBIC is not supported on dual-

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Accessory Product Details

22

software version K.12.21 or later. Use the "auto-100" port setting to enable
100 Mb operation.
Important: The earlier J8177B does not support 100 Mb operation. When
used in the Switch gl 20
J8177C mini
port, but will block access to the other port.

Services

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

level descriptions and product numbers.
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.

HPE LC to LC Multi-

Cabling

Cable type:

50/125
modal bandwidth of 2000 MHz/km as detailed in TIA

distances of up to 300 m

Maximum distance

10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.

Services

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

level
descriptions and product numb
times in your area, please contact your local Hewlett Packard Enterprise
sales office.

HPE LC to LC Multi-

Cabling

Cable type:

50/125
modal bandwidth of 2000 MHz/km as detailed in TIA-492AAAC for

-Port 10/100/1000 Module (J4908A), the

-GBIC can be installed in either the upper or lower mini-GBIC

for details on the service-

For details about services and

mode OM3 2-Fiber 0.5m

µm (core/cladding) diameter, mulitimode fiber optic, with effective

1-Pack Fiber Optic Cable

(AJ833A)

• Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±

2.0um Coating diameter: 245 ± 10um

• Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km

@850/1300nm.

• Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km

@850/1300nm. VCSEL Laser sources: 600 / 600 meters
@850/1300nm for Gigabit Ethernet compliant links.

• CABLE: The cable is duplex zipcord graded index 50/125um

multimode optical fiber and designed to work in both the 850 and
1300 nm wavelength windows.

• BULK CABLE & CABLE ASSEMBLY CONFIGURATION:

• Jacket Material: Riser Grade - Low Smoke Zero Halogen

thermoplastic.

• Jacket Color: Aqua for OM3 multimode per TIA 598

• Boot Color: White

• Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003

dB/M added for lengths > 30 meters.

• Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @

1310 nm @ 23°C as tested in accordance with EIA 455-46.

• Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

-492AAAC for

:

mode OM3 2-Fiber 1.0m
1-Pack Fiber Optic Cable

µm (core/cladding) diameter, mulitimode fiber optic, with effective

for details on the service-

ers. For details about services and response

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Accessory Product Details

23

(AJ834A)

distances of up to 300 m

Maximum distance

10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.

Services

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

level
descriptions
times in your area, please contact your local Hewlett Packard Enterprise
sales office.

HPE LC to LC Multi-

Cabling

Cable type:

50/125
modal bandwidth of 2000 MHz/km as detailed in TIA
distances of up to 300 m;

Maximum distance

10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.

• CABLE: The cable is duplex zipcord graded index 50/125um

:

• Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±

2.0um Coating diameter: 245 ± 10um

• Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km

@850/1300nm.

• Optical Glass: For Laser sources: 2000/500 MHz-km

@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.

• CABLE: The cable is duplex zipcord graded index 50/125um

multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.

• BULK CABLE & CABLE ASSEMBLY CONFIGURATION:

• Jacket Material: Riser Grade - Low Smoke Zero Halogen

thermoplastic.

• Jacket Color: Aqua for OM3 multimode per TIA 598

• Boot Color: White

• Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003

dB/M added for lengths > 30 meters.

• Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @

1310 nm @ 23°C as tested in accordance with EIA 455-46.

• Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

mode OM3 2-Fiber 2.0m

µm (core/cladding) diameter, mulitimode fiber optic, with effective

1-Pack Fiber Optic Cable

(AJ835A)

• Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±

2.0um Coating diameter: 245 ± 10um

• Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km

@850/1300nm.

• Optical Glass: For Laser sources: 2000/500 MHz-km

@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.

for details on the service-

and product numbers. For details about services and response

-492AAAC for

:

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Accessory Product Details

24

multimode optical fiber. The cable is designed to work in both the

Services

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.

HPE LC to LC Multi-

Cabling

Cable type:

50/125
modal bandwidth of 2000 MHz/km as detailed in TIA

distances of up to 300 m;

Maximum distance

10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: This specification defines the detail requirements for a tight
buffered duplex fiber optic multimode OM3 50/125 um fiber optic cable
and Ethernet assembly with LC duplex connectors on one end and LC
duplex connectors on other end.

Services

Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service-level

850 and 1300 nm wavelength windows.

• BULK CABLE & CABLE ASSEMBLY CONFIGURATION:

• Jacket Material: Riser Grade - Low Smoke Zero Halogen

thermoplastic.

• Jacket Color: Aqua for OM3 multimode per TIA 598

• Boot Color: White

• Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003

dB/M added for lengths > 30 meters.

• Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @

1310 nm @ 23°C as tested in accordance with EIA 455-46.

• Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

for details on the service-

mode OM3 2-Fiber 5.0m

µm core/cladding) diameter, mulitimode fiber optic, with effective

1-Pack Fiber Optic Cable

(AJ836A)

• Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±

2.0um Coating diameter: 245 ± 10um

• Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km

@850/1300nm.

• Optical Glass: For Laser sources: 2000/500 MHz-km

@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.

• CABLE: The cable is duplex zipcord graded index 50/125um

multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.

• BULK CABLE & CABLE ASSEMBLY CONFIGURATION:

• Jacket Material: Riser Grade - Low Smoke Zero Halogen

thermoplastic.

• Jacket Color: Aqua for OM3 multimode per TIA 598

• Boot Color: White

• Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003

dB/M added for lengths > 30 meters.

• Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @

1310 nm @ 23°C as tested in accordance with EIA 455-46.

• Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

-492AAAC for

:

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Accessory Product Details

25

descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.

HPE LC to LC Multi-

Cabling

Cable type:

50/125
modal bandwidth of 2000 MHz/km as detailed in TIA

distances of up to 300 m;

Maximum distance

10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.

Services

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.

HPE LC to LC Multi-

Cabling

Cable type:

50/125
modal bandwidth of 2000 MHz/km as detailed in TIA
distances of up to 300 m;

Maximum d

10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.

• Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±

mode OM3 2-Fiber

µm (core/cladding) diameter, mulitimode fiber optic, with effective

15.0m 1-Pack Fiber
Optic Cable (AJ837A)

• Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±

2.0um Coating diameter: 245 ± 10um

• Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km

@850/1300nm.

• Optical Glass: For Laser sources: 2000/500 MHz-km

@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.

• CABLE: The cable is duplex zipcord graded index 50/125um

multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.

• BULK CABLE & CABLE ASSEMBLY CONFIGURATION:

• Jacket Material: Riser Grade - Low Smoke Zero Halogen

thermoplastic.

• Jacket Color: Aqua for OM3 multimode per TIA 598

• Boot Color: White

• Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003

dB/M added for lengths > 30 meters.

• Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @

1310 nm @ 23°C as tested in accordance with EIA 455-46.

• Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

-492AAAC for

:

mode OM3 2-Fiber

µm (core/cladding) diameter, mulitimode fiber optic, with effective

30.0m 1-Pack Fiber
Optic Cable (AJ838A)

for details on the service-

-492AAAC for

istance:

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Accessory Product Details

26

2.0um Coating diameter: 245 ± 10um

Services

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.

HPE LC to LC Multi-

Cabling

Cable type:

50/125
modal bandwidth of 2000 MHz/km as detailed in TIA
distances of up to 300 m

Maximum distance

10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.

• Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @

• Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km

@850/1300nm.

• Optical Glass: For Laser sources: 2000/500 MHz-km

@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.

• CABLE: The cable is duplex zipcord graded index 50/125um

multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.

• BULK CABLE & CABLE ASSEMBLY CONFIGURATION:

• Jacket Material: Riser Grade - Low Smoke Zero Halogen

thermoplastic.

• Jacket Color: Aqua for OM3 multimode per TIA 598

• Boot Color: White

• Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003

dB/M added for lengths > 30 meters.

• Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @

1310 nm @ 23°C as tested in accordance with EIA 455-46.

• Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

for details on the service-

mode OM3 2-Fiber

50.0m 1-Pack Fiber
Optic Cable (AJ839A)

µm (core/cladding) diameter, mulitimode fiber optic, with effective

• Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±

2.0um Coating diameter: 245 ± 10um

• Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km

@850/1300nm.

• Optical Glass: For Laser sources: 2000/500 MHz-km

@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.

• CABLE: The cable is duplex zipcord graded index 50/125um

multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.

• BULK CABLE & CABLE ASSEMBLY CONFIGURATION:

• Jacket Material: Riser Grade - Low Smoke Zero Halogen

thermoplastic.

• Jacket Color: Aqua for OM3 multimode per TIA 598

• Boot Color: White

• Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003

dB/M added for lengths > 30 meters.

-492AAAC for

;

:

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Accessory Product Details

27

1310 nm @ 23°C as tested in accordance with EIA 455-46.

Services

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.

HPE Premier Flex LC/LC

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.

• Core Diameter: 50um ±3um,

diameter: 245 ± 10um

• Bandwidth: 3000 MHz

• Jacket Color: Blue

• Jacket Material: Riser Grade

thermoplastic

• Boot Color: White

• Outer Jacket Print: HP

Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.

• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m

added for lengths >30m

• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45

Services

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networkin

level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.

HPE Premier Flex LC/LC

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.

• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating

diameter: 245 ±

• Bandwidth: 3000 MHz

• Jacket Color: Blue

• Jacket Material: Riser Grade

thermoplastic

• Boot Color: White

• Outer Jacket Print: HPE PremierFlex OM3+ Fiber Optic Cable, 50/125um,

Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.

• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m

added for lengths >30m

• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm

@ 23°C as tested in accordance with EIA 455-45

Services

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

level
descriptio
times in your area, please contact your local Hewlett Packard Enterprise

Multi-mode OM4 2 fiber
1m Cable (QK732A)

• Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

for details on the service-

Cladding diameter: 125um ±2um; Coating

-km @ 850nm (Laser)

– Low Smoke Zero Halogen (LSZH)

E PremierFlex OM3+ Fiber Optic Cable, 50/125um,

Multi-mode OM4 2 fiber
2m Cable (QK733A)

ns and product numbers. For details about services and response

g/services for details on the service-

10um

-km @ 850nm (Laser)

– Low Smoke Zero Halogen (LSZH)

for details on the service-

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Accessory Product Details

28

sales office.

HPE Premier Flex LC/LC

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.

• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating

diameter: 245 ± 10um

• Bandwidth: 3000 MHz

• Jacket

• Jacket Material: Riser Grade

thermoplastic

• Boot Color: White

• Outer Jacket Print:

Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
whi

• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m

added for lengths >30m

• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm

@ 23°C as tested in accordance with EIA 455-45

Services

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

level
descriptions and product numbers. For details about services and
times in your area, please contact your local Hewlett Packard Enterprise
sales office.

HPE Premier Flex LC/LC

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.

• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating

diameter: 245 ± 10um

• Bandwidth: 3000 MHz

• Jacket Color: Blue

• Jacket Material: Riser Grade

thermoplastic

• Boot Color: White

• Outer Jacket Print:

Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.

•

added for lengths >30m

• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm

@ 23°C as tested in accordance with EIA 455-45

Services

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

level
descriptions and product numbers. For details about services and response
times in your area, please contact your local
sales office.

HPE Premier Flex LC/LC

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on

• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating

Multi-mode OM4 2 fiber
5m Cable (QK734A)

-km @ 850nm (Laser)

Color: Blue

– Low Smoke Zero Halogen (LSZH)

HPE PremierFlex OM3+ Fiber Optic Cable, 50/125um,

te stripe that runs the entire length of the cable.

for details on the service-

response

Multi-mode OM4 2 fiber
15m Cable (QK735A)

Multi-mode OM4 2 fiber
30m Cable (QK736A)

Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m

each end.

-km @ 850nm (Laser)

– Low Smoke Zero Halogen (LSZH)

HPE PremierFlex OM3+ Fiber Optic Cable, 50/125um,

for details on the service-

Hewlett Packard Enterprise

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Accessory Product Details

29

diameter: 245 ± 10um

• Bandwidth: 3000 MHz

• Jacket Color: Blue

• Jacket Material: Riser Grade

thermoplastic

• Boot Color: White

• Outer Jacket Print:

Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.

• Insertion Loss: Less than 0.5dB @ 850nm with LED sourc

added for lengths >30m

• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm

@ 23°C as tested in accordance with EIA 455-45

Services

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.

HPE Premier Flex LC/LC

Notes

Cable Specs: Graded-index, "bendable" fiber optic multimode OM3+
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.

• Core diameter: 50um ±3um, Cladding diamete

diameter: 245 ± 10um

• Bandwidth: 3000 MHz

• Jacket Color: Blue

• Jacket Material: Riser Grade

thermoplastic

• Boot Color: White

• Outer Jacket Print:

Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.

• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m

added for lengths >30m

• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm
@ 23°C as tested in accordance with EIA 455-45

Services

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

level
descriptions and product numbers. For details about services and response
times in your area, please contact your local Hewlett Packard Enterprise
sales office.

Multi-mode OM4 2 fiber
50m Cable (QK737A)

-km @ 850nm (Laser)

– Low Smoke Zero Halogen (LSZH)

HPE PremierFlex OM3+ Fiber Optic Cable, 50/125um,

e, 0.003dB/m

for details on the service-

r: 125um ±2um; Coating

-km @ 850nm (Laser)

– Low Smoke Zero Halogen (LSZH)

HPE PremierFlex OM3+ Fiber Optic Cable, 50/125um,

for details on the service-

Page

QuickSpecs

HPE OfficeConnect 1950 Switch Series

Summary of Changes

30

Date

Version History

Action

Description of Change:

30-May-2017

Form Version 7 to 8

Changed

Minor updates made on Technical Specifications

05-Sep-2016

From Version 6 to 7

Added

Model added: JH295A

01-Aug-2016

From Version 5 to 6

Changed

Adding #AC3 Option on Configuration section
Technical Specifications updated

06-May-2016

From Version 4 to 5

Changed

Document name changed to HPE OfficeConnect 1950

Overview updated.

01-Dec-2015

From Version 3 to 4

Changed

Overview and Technical Specifications updated

28-Sep-2015

From Version 2 to 3
Added

Bundles section added on Accessories. SKUs added:
JH376A, JH377A

Changed

Minor changes on the Overview section

29-Jun-2015

From Version 1 to 2

Changed

Changes made on the Product overview and Features and
benefits sections

Sign up for updates

© Copyright 2017 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The
services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enter
shall not be liable for technical or editorial errors or omissions contained herein.

To learn more, visit:

c04545486

Switch Series. SKU descriptions, Features and Benefits and

only warranties for Hewlett Packard Enterprise products and

http://www.hpe.com/networking

- 15191 - Worldwide - V8 - 30-May-2017

prise

Page