HP 1820 8G User Manual

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Overview

1

HPE OfficeConnect 1820 Switch Series

Models

HPE OfficeConnect 1820 8G Switch

HPE OfficeConnect 1820 8G PoE+ (65W) Switch

J9982A

HPE OfficeConnect 1820 24G Switch

HPE OfficeConnect 1820 24G PoE+ (185W) Switch

J9983A

HPE OfficeCon

J9981A

HPE OfficeConnect 1820 48G PoE+ (370W) Switch

J9984A

Key features

Product overview

J9979A

J9980A

nect 1820 48G Switch

• Customized operation using intuitive Web interface

• Flexible deployment options including wall, under table and desktop mounting

• 24- and 48 port models include SFP ports

• 8-, 24- and 48 port non-PoE+ models are fanless for quiet operation

• Limited lifetime Warranty

Page

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Overview

Page 2

HPE OfficeConnect 1820 Switch Series
designed for small businesses looking for key features in an easy
portfolio of Hewlett Packard Enterprise small business networking products.

The series consists of six switches including 8
models each providing non
, 24
support flexible installation options, including mounting on wall, under table, or on desktop. The 8
be powered by an upstream Power over Etherne

These Gigabit switches are plug
a simple Web browser
aggregation trunking, and DSCP QoS policies. All models include the latest energy
Ethernet (EEE) and idle
warranty provides advance hardware replacement with next business day shipment in most countries, limited 24x7 telephone
support available from HPE for the first 90 days, and limited electronic and business hours telephone support is available from HPE
for the entire warranty period.

Features and Benefits

Management

Quality of Service (QoS)

IEEE 802.1p/Q

devices are basic, smart-managed, fixed-configuration Gigabit Ethernet Layer 2 switches

-to-administer solution. The series is part of the OfficeConnect

-, 24- and 48-port Gigabit Ethernet switches and 8-, 24-, and 48-port Gigabit PoE+

-blocking Gigabit per port performance. Some models include SFP ports for fiber connectivity and the 8-

-, and 48-port non PoE+ models are fanless, making them ideal for office deployments. All HPE OfficeConnect 1820 Switches

-port Gigabit Ethernet model can

t (PoE) switch for environments where no line power is available.

-and-play out of the box, yet network operation can be fine-tuned through features available from

-based GUI, if necessary. Customizable features include VLANs, Rapid Spanning Tree, IGMP Snooping, link

-saving capabilities, including Energy Efficient

-port power down. HPE OfficeConnect 1820 Switch Series includes a Limited Lifetime Warranty. This

• Simple Web management

Allows for easy management of the switch—even by nontechnical users—through an intuitive Web GUI; supports HTTP
and HTTP Secure (HTTPS).

• SNMPv1, v2c

Enables devices to be discovered and monitored from an SNMP management station.

• Port mirroring

Enables traffic on a port to be simultaneously sent to a network analyzer for monitoring.

• Dual flash images

Provides independent primary and secondary operating system files for backup while upgrading.

• Network Time Protocol (NTP)

Synchronizes timekeeping among distributed time servers and clients; keeps timekeeping consistent among all clock­dependent devices within the network.

• Manual network time configuration

Manually set the date and time on the switch in the absence of an NTP server.

• Default DHCP client mode

Allows the switch to be directly connected to a network, enabling plug-and-play operation; in absence of a DHCP server
on the network, the switch falls back to a default, fixed IP address.

• Traffic prioritization

Provides time-sensitive packets (like VoIP and video) with priority over other traffic based on DSCP or IEEE 802.1p
classification; packets are mapped to eight hardware queues for more effective throughput.

• Broadcast control

Allows limiting of broadcast traffic rate to reduce unwanted network broadcast traffic.

•

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Overview

Page 3

Connectivity

SFP ports are in addition to available copper Ethernet ports, providing a higher total number of available ports. SFP ports

Obtains power provided by a standard PoE device connected to Port 1; deploy the switch wherever an Ethernet cable can

a 24 hour day. The scheduler enables the flexibility to select individual days of a week as well as reoccurrence on a weekly

Security

Delivers data to devices based on the priority and type of traffic; supports IEEE 802.1Q.

• Auto-MDI/MDIX

• IEEE 802.3X flow control

• Loop protection

• SFP ports for fiber connectivity

• IEEE 802.3af PoE-powered device option

• IEEE 802.3at Power over Ethernet (PoE+)

• PoE+ port availability

• Auto PoE power configuration

• PoE shut down mode

Automatically adjusts for straight-through or crossover cables on all ports.

Provides a flow throttling mechanism propagated through the network to prevent packet loss at a congested node.

If the switch detects a loop, it disables the source port from forwarding data packets originating from the switch to avoid
broadcast storms.

Provides fiber connections for uplinks and other connections across longer distances than copper cabling can support;

available on 24- and 48 port models.

reach as a power outlet is not needed (8-port GbE non-PoE+ model only).

Provides up to 30W per port, which allows support of the latest PoE+-capable devices such as IP phones, wireless access
points, and security cameras, as well as any IEEE 802.3af-compliant end device; lowers the cost of additional electrical
cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments.

Ports 1-4 provide PoE+ on the HPE 1820-8G-PoE+ (65W) switch. Ports 1 – 12 provide PoE+ on the HPE 1820-24G-PoE+
(180W) switch. Ports 1-24 provide PoE+ on the HPE 1820-48G-PoE+ (370W) switch.

The switch automatically assigns the required power to a port for a PD device based on LLDP (Link Layer Discovery
Protocol). Optionally, the switch permits manual, per port, PoE power configuration.

A PoE scheduler provides the ability to define the hours of PoE power being supplied on a group of switch ports based on

• Energy Efficient Ethernet

• Auto port shut-down

• Energy savings status

• Secure Sockets Layer (SSL)

• Automatic denial-of-service protection

• Management password

basis with a start and end date.

Compliant with IEEE 802.3az standard requirements to save energy during periods of low data activity.

The switch saves power by automatically shutting down power to inactive ports. Power is restored on a port upon link
detection.

The switch provides an estimated cumulative energy savings due to green Ethernet features enabled.

Encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch.

Monitors nine types of malicious attacks and protects the network by blocking these attacks.

Provides security so that only authorized access to the Web browser interface is allowed.

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Overview

Page 4

Performance

Layer 2 switching

Resiliency and high availability

Ease of use

Flexibility

Warranty and support

http://www.hpe.com/networking/warrantysummary for full warranty and

• Half-/full-duplex auto-negotiating capability on every port

Doubles the throughput of every port.

• IGMP snooping

Improves network performance through multicast filtering, instead of flooding traffic to all ports.

• VLAN support and tagging

Supports up to 64 port-based VLANs and dynamic configuration of IEEE 802.1Q VLAN tagging, providing security
between workgroups.

• Jumbo packet support

Improves the performance of large data transfers; supports frame size of up to 9220 bytes.

• IEEE 802.1D Spanning Tree Protocol (STP) and IEEE 802.1W Rapid Spanning Tree Protocol (RSTP)

Provides redundant links while preventing network loops.

• Link aggregation

Brings together groups of ports automatically using Link Aggregation Control Protocol (LACP) or, manually, to form an
ultra-high-bandwidth connection to the network backbone; helps prevent traffic bottlenecks; the 8 port models support 4
trunks, the 24-port models support 8 trunks and the 48-port models support 16 trunks. The 8- and 24-port switches can
support up to 4 ports per trunk, the 48-port switches can support up to 8 ports per trunk

• Locator LED

Allows users to set the locator LED on a specific switch to either turn on, blink, or turn off; simplifies troubleshooting by
making it easy to locate a particular switch within a rack of similar switches.

• Comprehensive LED display with per-port indicators

Provides an at-a-glance view of status, activity, speed, and full-duplex operation.

• Flexible installation

Allows mounting on wall, desktop, or under-table with supplied hardware.

• Rack mountable

All models include rack-mounting hardware for mounting in a standard 19 inch telco rack.

• Kensington lock slot

Allows switches to be physically secured in open-space deployments (8-,and 24 port models).

• Limited Lifetime Warranty

This series comes with a Limited Lifetime Warranty providing advance hardware replacement with next business day
shipment in most countries, 24x7 phone support available for the first 90 days, and electronic and business hours phone
support for the entire warranty period. See

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Overview

Page 5

support information included with your product purchase.

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Configuration

Page 6

Build To Order:

BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack
solution.

HPE OfficeConnect

•

•

See Configuration

NOTE:

HPE OfficeConnect 1820 24G Switch

•

• 1U - Height

See Configuration

PDU Cable NA/MEX/TW/JP

•

PDU Cable NA/MEX/TW/JP

•

High Volt Switch/Router to Wall Power Cord

•

HPE OfficeConnect 1820 48G Switch

J9981A

•

• 1U - Height

See Configuration

PDU Cable NA/MEX/TW/JP

•

PDU Cable NA/MEX/TW/JP

•

High Volt Switch/Router to Wall Power Cord

J9981A#B2E

•

HPE OfficeConnect 1820 8G PoE+ (65W) Switch

•

•

See Configuration

HPE OfficeConnect 1820 24G PoE+ (185W) Switch

1820 8G Switch J9979A

8 RJ-45 autosensing 10/100/1000 ports
1U - Height (Desktop Model)

J9980A

24 RJ-45 autosensing 10/100/1000 ports

• 2 SFP 100/1000 Mbps ports (min=0 \ max=2 SFP Transceivers)

J9980A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

-Shippable

2

NOTE:1, 3

J9980A#B2C

C15 PDU Jumper Cord (ROW)

J9980A#B2E

NEMA L6-20P Cord (NA/MEX/JP/TW)

48 RJ-45 autosensing 10/100/1000 ports

• 4 SFP 100/1000 Mbps ports (min=0 \ max=4 SFP Transceivers)

J9981A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

J9981A#B2C

C15 PDU Jumper Cord (ROW)

NEMA L6-20P Cord (NA/MEX/JP/TW)

NOTE:1, 3

J9982A

4 RJ-45 autosensing 10/100/1000 PoE+ ports

• 4 RJ-45 autosensing 10/100/1000 ports

1U - Height (Desktop Model)

J9983A

NOTE:2

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Configuration

Page 7

•

See Configuration

PDU Cable NA/MEX/TW/JP

•

PDU Cable NA/MEX/TW/JP

• C15 PDU Jumper Cord (ROW)

High Volt

•

HPE OfficeConnect 1820 48G PoE+ (370W) Switch

•

• 1U - Height

See Configuration

PDU Cable NA/MEX/TW/JP

•

PDU Cable NA/MEX/TW/JP

•

High Volt Switch/Router to Wall Power Cord

J9984A#B2E

•

Configuration Rules:

Note 1

"The following Transceivers install into this switch:

HPE X121 1G SFP LC SX Transceiver

HPE X121 1G SFP LC LX Transceiver

HPE X111 100M SFP LC FX Transc

HPE X121 1G SFP RJ45 T Transceiver

J8177C

Note 2

Localization required. (See Localization Menu for list.)

Note 3

Localization (Wall Power Cord) required on orders without #B2B or #B2C (PDU Power Cord). (See Localization
Menu)

Rack Level Integration CTO Models

QuickSpecs

12 RJ-45 autosensing 10/100/1000 PoE+ ports

• 12 RJ-45 autosensing 10/100/1000 ports

• 2 SFP 100/1000 Mbps ports (min=0 \ max=2 SFP Transceivers)

• 1U - Height

J9983A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

J9983A#B2C

Switch/Router to Wall Power Cord J9983A#B2E

NEMA L6-20P Cord (NA/MEX/JP/TW)

J9984A

24 RJ-45 autosensing 10/100/1000 PoE+ ports

• 24 RJ-45 autosensing 10/100/1000 ports

• 4 SFP 100/1000 Mbps ports (min=0 \ max=4 SFP Transceivers)

NOTE:1, 3

NOTE:1, 3

J9984A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

J9984A#B2C

C15 PDU Jumper Cord (ROW)

NEMA L6-20P Cord (NA/MEX/JP/TW)

J4858C
J4859C

eiver J9054C

HPE OfficeConnect 1820 Switch Series

Configuration

Page 8

HPE OfficeConnect 1820 24G Switch

•

•

See Configuration

PDU Cable NA/MEX/TW/JP

•

PDU Cable NA/MEX/TW/JP

•

HPE OfficeConnect 1820 48G Switch

J9981A

•

•

See Configuration

PDU Cable NA/MEX/TW/JP

•

PDU Cable NA/MEX/TW/JP

•

HPE OfficeConnect 1820 24G PoE+ (185W) Switch

J9983A

•

•

See Configuration

PDU Cable NA/MEX/TW/JP

•

PDU Cable NA/MEX/TW/JP

J9983A#B2C

•

HPE OfficeConnect 1820 48G PoE+ (370W) Switch

•

•

See Configuration

PDU Cable NA/MEX/TW/JP

J9984A#B2B

•

PDU Cable NA/MEX/TW/JP

• C15 PDU Jumper Cord (ROW)

J9980A

24 RJ-45 autosensing 10/100/1000 ports

• 2 SFP 100/1000 Mbps ports (min=0 \ max=2 SFP Transceivers)

1U - Height

J9980A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

J9980A#B2C

C15 PDU Jumper Cord (ROW)

48 RJ-45 autosensing 10/100/1000 ports

• 4 SFP 100/1000 Mbps ports (min=0 \ max=4 SFP Transceivers)

1U - Height

J9981A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

NOTE:1, 2, 3

NOTE:1, 2, 3

J9981A#B2C

C15 PDU Jumper Cord (ROW)

12 RJ-45 autosensing 10/100/1000 PoE+ ports

• 12 RJ-45 autosensing 10/100/1000 ports

• 2 SFP 100/1000 Mbps ports (min=0 \ max=2 SFP Transceivers)

1U - Height

J9983A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

C15 PDU Jumper Cord (ROW)

J9984A

24 RJ-45 autosensing 10/100/1000 PoE+ ports

• 24 RJ-45 autosensing 10/100/1000 ports

• 4 SFP 100/1000 Mbps ports (min=0 \ max=4 SFP Transceivers)

1U - Height

NOTE:1, 2, 3

NOTE:1, 2, 3

C15 PDU Jumper Cord (NA/MEX/TW/JP)

J9984A#B2C

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Configuration

Page 9

Configuration Rules:

Note 1

The following Transceivers

HPE X121 1G SFP LC SX Transceiver

HPE X121 1G SFP LC LX Transceiver

HPE X111 100M SFP LC FX Transceiver

J9054C

HPE X121 1G SFP RJ45 T Transceiver

Note 2

Localization (Wall Power Cord) require
Menu)
REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the Defaulted Power Cable
option on the Switches/Routers.

Note 3

If this switch is factory instal

Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.

Transceivers

SFP Transceivers

HPE X121 1G SFP LC SX Transceiver

HPE X121 1G SFP LC LX Transceiver

HPE X121 1G SFP RJ45 T Transceiver

HPE X111 100M SFP LC FX Transceiver

Internal Power Supplies

Power supplies included

Remarks:

Drop down under power supply should offer the following
Switch/Router/Power Supply to PDU Power Cord

#B2B in North America, Mexico, Taiwan, and Japan or #B2C
ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord
CTO)
High Volt Switch/Router/Power Supply to Wall Power Cord
Mexico, Taiwan, and Japan)

Cables

Multi

install into this switch

J4858C
J4859C

J8177C

d on orders without #B2B, #B2C (PDU Power Cord) . (See Localization

led in any HPE Racks, Then the J9583A#0D1 is required.

J4858C
J4859C

J8177C

J9054C

options and results:

-

- Localized Option (Watson Default for BTO and Box Level

- #B2E Option. (Offered only in North America,

-Mode Cables

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Configuration

Page 10

HP LC to LC Multi

HP LC to LC Multi

HP LC to LC Multi

HP LC to LC Multi

HP LC to LC Multi

HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable

AJ838A

HP LC to LC Multi

HP Premier Flex LC/LC Multi

HP Premier Flex LC/LC Multi

HP Premier Flex LC/LC Multi

HP Premier Flex LC/LC Multi

HP Premier Flex LC/LC Multi

HP Premier Flex LC/LC Multi

Switch Enclosure Options

Rack Mount Kit

HPE X410 1U Universal 4

•

See Configuration

NOTE:1

Configurati

Note 1

If this Mounting Kit is order with #0D1 then it integrates to the HP
switch)

-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable AJ833A

-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable AJ834A

-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable AJ835A

-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable AJ836A

-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable AJ837A

-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable AJ839A

-mode OM4 2 fiber 1m Cable QK732A

-mode OM4 2 fiber 2m Cable QK733A

-mode OM4 2 fiber 5m Cable QK734A

-mode OM4 2 fiber 15m Cable QK735A

-mode OM4 2 fiber 30m Cable QK736A

-mode OM4 2 fiber 50m Cable QK737A

-post Rackmount Kit J9583A

Supported on J9980A, J9981A, J9983A, J9984A

on Rules:

E Network Rack. (not the

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Technical Specifications

Page 11

HPE OfficeConnect 1820

I/O ports and slots

Supports a maximum of 8 autosensing 10/100/1000 ports

Memory and processor
100 Mb Latency

1000 Mb Latency

Throughput

MAC address table size

8000 entries

Reliability

MTBF (years)

Operating temperature

humidity

temperature

relative humidity

Altitude

Acoustic

AC Voltage

100 - 240 VAC

Current

Maximum power rating

PoE power

and all modules populated.

8G Switch (J9979A)

8 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE

802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

Physical characteristics Dimensions 10(w) x 6.28(d) x 1.73(h) in (25.4 x 15.95 x 4.39

cm) (1U height)
Weight 1.81 lb (0.82 kg)
ARM Cortex-A9 @ 400 MHz, 128 MB SDRAM; Packet buffer size: 1.5 MB, 16

MB flash

Performance

< 7 µs (LIFO 64-byte packets)

< 2.4 µs (LIFO 64-byte packets)

up to 11.9 Mpps (64-byte packets)
Switching capacity 16 Gbps

144.93

Environment

Operating relative

Nonoperating/Storage

Nonoperating/Storage

32°F to 104°F (0°C to 40°C)

15% to 95% @ 104°F (40°C)

-40°F to 158°F (-40°C to 70°C)

15% to 95% @ 140°F (60°C)

up to 9,842 ft (3 km)

Power: 0 dB no fan

Electrical characteristics Frequency 50/60 Hz

. 2 A

12.2 W

Idle power 10.2 W

Notes Idle power is the actual power consumption of

the device with no ports connected.

Maximum power rating and maximum heat

dissipation are the worst-case theoretical

maximum numbers provided for planning the

infrastructure with fully loaded PoE (if

equipped), 100% traffic, all ports plugged in,

Safety UL 60950-1; EN 60825; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No.

60950-1

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Technical Specifications

Page 12

Emissions

Generic

EN

EN 55024, CISPR 24

ESD

Radiated

Surge

Conducted

magnetic field

Voltage dips and
interruptions

Harmonics

Flicker

Management

Web browser

Notes

HPE OfficeConnect 1820

I/O ports and slots

Weight

Memory and processor
100 Mb Latency

Switching capacity

16 Gbps

MAC address table size

Reliability

MTBF (years)

Operating relative
humidity

FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A F

Immunity

EFT/Burst IEC 61000-4-4

Power frequency

Use only supported genuine HPE mini-GBICs with your switch

Services Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.

EN 55024, CISPR 24

IEC 61000-4-2

IEC 61000-4-3

IEC 61000-4-5

IEC 61000-4-6

IEC 61000-4-8

IEC 61000-4-11

EN 61000-3-2, IEC 61000-3-2

EN 61000-3-3, IEC 61000-3-3

for details on the service-

8G PoE+ (65W) Switch
(J9982A)

4 RJ-45 autosensing 10/100/1000 PoE+ ports; Duplex: 10BASE­T/100BASE-TX: half or full; 1000BASE-T: full only

4 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE

802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

Physical characteristics Dimensions 10(w) x 6.28(d) x 1.73(h) in (25.4 x 15.95 x 4.39

cm) (1U height)

2.01 lb (0.91 kg)

ARM Cortex-A9 @ 400 MHz, 128 MB SRAM; Packet buffer size: 1.5 MB, 16
MB flash

Performance

< 7 µs (LIFO 64-byte packets)

1000 Mb Latency < 2.3 µs (LIFO 64-byte packets)
Throughput up to 11.9 Mpps (64-byte packets)

8000 entries

112.36

Environment

Operating temperature 32°F to 104°F (0°C to 40°C)

15% to 95% @ 104°F (40°C)

Nonoperating/Storage

-40°F to 158°F (-40°C to 70°C)

temperature

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Technical Specifications

Page 13

relative humidity

Altitude

up to 9,842 ft (3 km)

Acoustic

Frequency

Current

Maximum power rating

Idle power

PoE power

Notes

PoE Power is the power supplied by the internal

Safety
Emissions

Generic

EN 55024, CISPR 24

EN

ESD

EFT/Burst

Surge

Conducted

magnetic field

Voltage dips and
interruptions

Harmonics

Flicker

EN 61000-3-3, IEC 61000-3-3

Management

Notes

Nonoperating/Storage

Electrical characteristics

AC Voltage 100 - 240 VAC

15% to 95% @ 140°F (60°C)

Power: 0 dB no fan

50/60 Hz

. 9 A

83.9 W

12.6 W

65 W PoE+

Idle power is the actual power consumption of

the device with no ports connected.

Maximum power rating and maximum heat

dissipation are the worst-case theoretical

maximum numbers provided for planning the

infrastructure with fully loaded PoE (if

equipped), 100% traffic, all ports plugged in,

and all modules populated.

power supply, it is dependent on the type and

quantity of power supplies and may be

supplemented with the use of an External

Power Supply (EPS).
UL 60950-1; EN 60825; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No.

60950-1
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A

Immunity

EN 55024, CISPR 24

IEC 61000-4-2
Radiated IEC 61000-4-3

IEC 61000-4-4

IEC 61000-4-5

Power frequency

IEC 61000-4-6

IEC 61000-4-8

IEC 61000-4-11

EN 61000-3-2, IEC 61000-3-2

Services Refer to the Hewlett Packard Enterprise website at

Web browser
Use only supported genuine HPE mini-GBICs with your switch

http://www.hpe.com/networking/services

for details on the service-

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Technical Specifications

Page 14

Enterprise sales office.

HPE OfficeConnect 1820

T, IEEE

Weight

6 lb (2.72 kg)

1000 Mb Latency

Switching capacity

52 Gbps

MAC address table size

Reliability

MTBF (years)

Operating relative
humidity

Nonoperating/Storage
relative humidity

Altitude

Electrical characteristics

Frequency

50/60 Hz

AC Voltage

Current

Idle power

16.9 W

PoE power

24G Switch (J9980A)

level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard

I/O ports and slots 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-

802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

2 SFP 100/1000 Mbps ports (IEEE 802.3z Type 1000BASE-X, IEEE 802.3u
Type 100BASE-FX)

Supports a maximum of 24 autosensing 10/100/1000 ports plus 2 SFP
100/1000 slots

Physical characteristics Dimensions 17.42(w) x 9.69(d) x 1.73(h) in (44.25 x 24.61 x

4.39 cm) (1U height)

Memory and processor ARM Cortex-A9 @ 400 MHz, 128 MB SDRAM; Packet buffer size: 1.5 MB, 16

MB flash

Performance

100 Mb Latency < 7 µs (LIFO 64-byte packets)

< 2 µs (LIFO 64-byte packets)

Throughput up to 38.6 Mpps (64-byte packets)

Environment

Operating temperature 32°F to 104°F (0°C to 40°C)

Nonoperating/Storage
temperature

Acoustic Power: 0 dB no fan

Maximum power rating 22 W

Notes Idle power is the actual power consumption of

8000 entries

80.00

15% to 95% @ 104°F (40°C)

-40°F to 158°F (-40°C to 70°C)

15% to 95% @ 140°F (60°C)

up to 9,842 ft (3 km)

100 - 127 / 200 - 240 VAC, rated

. 5/. 3 A

the device with no ports connected.

Maximum power rating and maximum heat

dissipation are the worst-case theoretical

maximum numbers provided for planning the

infrastructure with fully loaded PoE (if

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Technical Specifications

Page 15

Emissions

EN

ESD

Radiated

EFT/Burst

Surge

IEC 61000-4-5

Conducted

magnetic field

interruptions

Harmonics

Management

Notes

HPE OfficeConnect 1820
24G PoE+ (185W) Switch

Weight

7.3 lb (3.31 kg)

1000 Mb Latency

equipped), 100% traffic, all ports plugged in,

and all modules populated.

Safety UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN

60950-1
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A

Immunity

Generic EN 55024, CISPR 24

EN 55024, CISPR 24

IEC 61000-4-2

IEC 61000-4-3

IEC 61000-4-4

IEC 61000-4-6

Power frequency

IEC 61000-4-8

(J9983A)

Voltage dips and

IEC 61000-4-11

EN 61000-3-2, IEC 61000-3-2
Flicker EN 61000-3-3, IEC 61000-3-3
Web browser
Use only supported genuine HPE mini-GBICs with your switch

Services Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

for details on the service­level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.

I/O ports and slots 12 RJ-45 autosensing 10/100/1000 PoE+ ports; Duplex: 10BASE-

T/100BASE-TX: half or full; 1000BASE-T: full only
12 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE

802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T);
Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

2 SFP 100/1000 Mbps ports (IEEE 802.3z Type 1000BASE-X, IEEE 802.3u
Type 100BASE-FX)

Supports a maximum of 24 autosensing 10/100/1000 ports plus 2 SFP
100/1000 slots

Physical characteristics Dimensions 17.42(w) x 9.69(d) x 1.73(h) in (44.25 x 24.61 x

4.39 cm) (1U height)

Memory and processor ARM Cortex-A9 @ 400 MHz, 128 MB SDRAM; Packet buffer size: 1.5 MB, 16

MB flash

Performance

100 Mb Latency < 7 µs (LIFO 64-byte packets)

< 2 µs (LIFO 64-byte packets)

Throughput up to 38.6 Mpps (64-byte packets)

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Technical Specifications

Page 16

Switching capacity

MAC address table size

Reliability

MTBF (years)

64.52

Operating temperature

Nonoperating/Storage
temperature

relative humidity

Altitude

Acoustic

Frequency

(depending on power supply chosen)

Current

Maximum power rating

PoE power

Notes

PoE Power is the power supplied by the internal

Emissions

Immunity

Generic

EN

ESD

Radiated

IEC 61000-4-3

EFT/Burst

Surge

Power frequency

52 Gbps
8000 entries

Environment

Operating relative

32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C)

humidity

-40°F to 70°F (-40°C to 21.1°C)

Nonoperating/Storage

15% to 95% @ 140°F (60°C)

up to 9,842 ft (3 km)
Power: 36 dB

Electrical characteristics

Voltage

50/60 Hz
100 - 127 / 200 - 240 VAC, rated

2.6/1.3 A
240 W

Idle power 28.3 W

185 W PoE+
Idle power is the actual power consumption of

the device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if
equipped), 100% traffic, all ports plugged in,
and all modules populated.

power supply, it is dependent on the type and
quantity of power supplies and may be
supplemented with the use of an External
Power Supply (EPS).

Safety UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN

60950-1
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A

EN 55024, CISPR 24
EN 55024, CISPR 24
IEC 61000-4-2

IEC 61000-4-4
IEC 61000-4-5

Conducted IEC 61000-4-6

IEC 61000-4-8

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Technical Specifications

Page 17

magnetic field

interruptions

Harmonics

Flicker

Notes

Services

HPE OfficeConnect 1820

T, IEEE

100/1000 slots

Weight

100 Mb Latency

1000 Mb Latency

Throughput

MAC address table size

16000 entries

Reliability

MTBF (years)

Operating temperature

humidity

temperature

relative humidity

Altitude

Acoustic

48G Switch (J9981A)

Voltage dips and

IEC 61000-4-11

EN 61000-3-2, IEC 61000-3-2
EN 61000-3-3, IEC 61000-3-3

Management Web browser

Use only supported genuine HPE mini-GBICs with your switch
Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

for details on the service­level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.

I/O ports and slots 48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-

802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

4 SFP 100/1000 Mbps ports (IEEE 802.3z Type 1000BASE-X, IEEE 802.3u
Type 100BASE-FX)

Supports a maximum of 48 autosensing 10/100/1000 ports plus 4 SFP
ports

Supports a maximum of 48 autosensing 10/100/1000 ports plus 4 SFP

Physical characteristics Dimensions 17.42(w) x 9.69(d) x 1.73(h) in (44.25 x 24.61 x

4.39 cm) (1U height)

7.3 lb (3.31 kg)

Memory and processor ARM Cortex-A9 @ 400 MHz, 128 MB SDRAM; Packet buffer size: 1.5 MB, 16

MB flash

Performance

< 7 µs (LIFO 64-byte packets)
< 2 µs (LIFO 64-byte packets)
up to 77.3 Mpps (64-byte packets)

Switching capacity 104 Gbps

61.73

Environment

Operating relative

Nonoperating/Storage

32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C)

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage

15% to 95% @ 140°F (60°C)

up to 9,842 ft (3 km)
Power: 0 dB no fan

Electrical characteristics Frequency 50/60 Hz

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Technical Specifications

Page 18

Current

. 8/. 5 A

Maximum power rating

Idle power

Notes

Emissions

EN

ESD

Radiated

EFT/Burst

Surge

IEC 61000-4-5

Conducted

magnetic field

interruptions

Harmonics

Management

Notes

HPE OfficeConnect 1820

T, IEEE

Voltage 100 - 127 / 200 - 240 VAC, rated

(depending on power supply chosen)

39 W

28.8 W

PoE power

Idle power is the actual power consumption of
the device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if
equipped), 100% traffic, all ports plugged in,
and all modules populated.

Safety UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN

60950-1
FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A

Immunity

Generic EN 55024, CISPR 24

EN 55024, CISPR 24
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4

48G PoE+ (370W)
Switch (J9984A)

IEC 61000-4-6

Power frequency

Voltage dips and

IEC 61000-4-8

IEC 61000-4-11

EN 61000-3-2, IEC 61000-3-2
Flicker EN 61000-3-3, IEC 61000-3-3
Web browser
Use only supported genuine HPE mini-GBICs with your switch

Services Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

for details on the service­level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.

I/O ports and slots 24 RJ-45 autosensing 10/100/1000 PoE+ ports; Duplex: 10BASE-

T/100BASE-TX: half or full; 1000BASE-T: full only
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-

802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

4 SFP 100/1000 Mbps ports (IEEE 802.3z Type 1000BASE-X, IEEE 802.3u

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Technical Specifications

Page 19

100/1000 slots

Memory and processor
100 Mb Latency

1000 Mb Latency

Throughput

MAC address table size

16000 entries

Reliability

MTBF (years)

Operating temperature

humidity

temperature

relative humidity

Altitude

Acoustic

Voltage
Current

Idle power

54.8 W

PoE power

PoE Power is the power supplied by the internal

Type 100BASE-FX)

Physical characteristics Dimensions 17.42(w) x 12.7(d) x 1.73(h) in (44.25 x 32.26 x

Performance

Environment

Supports a maximum of 48 autosensing 10/100/1000 ports plus 4 SFP

4.39 cm) (1U height)
Weight 9.7 lb (4.4 kg)
ARM Cortex-A9 @ 400 MHz, 128 MB SDRAM; Packet buffer size: 1.5 MB, 16

MB flash

< 7 µs (LIFO 64-byte packets)
< 2 µs (LIFO 64-byte packets)
up to 77.3 Mpps (64-byte packets)

Switching capacity 104 Gbps

45.05

32°F to 104°F (0°C to 40°C)

Operating relative

15% to 95% @ 104°F (40°C)

Nonoperating/Storage

Nonoperating/Storage

-40°F to 158°F (-40°C to 70°C)

15% to 95% @ 140°F (60°C)

up to 9,842 ft (3 km)
Power: 45 dB

Electrical characteristics Frequency 50/60 Hz

100 - 127 / 200 - 240 VAC, rated
(depending on power supply chosen)

5.1/2.6 A
Maximum power rating 481 W

370 W PoE+

Notes

Idle power is the actual power consumption of
the device with no ports connected.
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if
equipped), 100% traffic, all ports plugged in,
and all modules populated.

power supply, it is dependent on the type and
quantity of power supplies and may be
supplemented with the use of an External
Power Supply (EPS).

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Technical Specifications

Page 20

Emissions

FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A

Generic

EN

Radiated

EFT/Burst

Surge

Conducted

Power frequency
magnetic field

interruptions

Harmonics

EN 61000-3-2, IEC 61000-3-2

Flicker

Management

Services

Standards and protocols

Denial of service protection

Safety UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN

60950-1

Immunity

EN 55024, CISPR 24
EN 55024, CISPR 24

ESD IEC 61000-4-2

IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8

Voltage dips and

IEC 61000-4-11

EN 61000-3-3, IEC 61000-3-3

Web browser

Notes Use only supported genuine HPE mini-GBICs with your switch

Refer to the Hewlett Packard Enterprise website at
http://www.hpe.com/networking/services for details on the service­level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.

(applies to all products in
series)

CPU DoS Protection

General protocols
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1W Rapid Spanning Tree Protocol
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
IEEE 802.3x Flow Control
RFC 1534 DHCP/BOOTP Interoperation
RFC 2030 Simple Network Time Protocol (SNTP) v4

Network management
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Accessories

Page 21

HPE OfficeConnect 1820

Cables

HP LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable

AJ835A

Mounting Kit

HPE X410 1U Universal 4-post Rackmount Kit

J9583A

HPE OfficeConnect 1820 24G Switch (J9980A)

HPE OfficeConnect 1820 24G PoE+ (185W) Switch (J9983A)

HPE X121 1G SFP LC LX Transceiver

J4859C

HPE OfficeConnect 1820 48G Switch (J9981A)

HPE X121 1G SFP LC SX Transceiver

J4858C

HPE OfficeConnect 1820 48G PoE+ (370W) Switch (J9984A)

HPE X121 1G SFP RJ45 T Transceiver

J8177C

Switch Series
accessories

HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable AJ833A
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable AJ834A

HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable AJ836A
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable AJ837A
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable AJ838A
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable AJ839A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable QK732A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable QK733A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable QK734A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable QK735A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable QK736A
HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable QK737A

HPE X121 1G SFP LC SX Transceiver J4858C
HPE X121 1G SFP LC LX Transceiver J4859C
HPE X121 1G SFP RJ45 T Transceiver J8177C
HPE X111 100M SFP LC FX Transceiver J9054C

HPE X121 1G SFP LC SX Transceiver J4858C

HPE X121 1G SFP RJ45 T Transceiver J8177C
HPE X111 100M SFP LC FX Transceiver J9054C

HPE X121 1G SFP LC LX Transceiver J4859C
HPE X121 1G SFP RJ45 T Transceiver J8177C
HPE X111 100M SFP LC FX Transceiver J9054C

HPE X111 100M SFP LC FX Transceiver J9054C
HPE X121 1G SFP LC SX Transceiver J4858C
HPE X121 1G SFP LC LX Transceiver J4859C

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Accessory Product Details

Page 22

NOTE: Details are not available for all accessories. The following specifications were available at the time of publication.

Cable type

50/125
modal bandwidth of 2000 MHz/km as detailed i
distances of up to 300 m

Maximum distance

10Gbps Transfer Rate (Ethernet): 300m

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end a

Refer to the Hewlett Packard Enterprise w

http://www.hpe.com/networking/services

level descriptions and product numbers. For details about services and
response times in your area, please contact your local
Enterprise sales office.

Pack

Cable type

50/125
modal bandwidth of 2000 MHz/km as detaile
distances of up to 300 m

HP LC to LC Multi-mode
OM3 2-Fiber 0.5m 1-

Cabling

:

µm (core/cladding) diameter, multimode fiber optic, with effective
Pack Fiber Optic Cable
(AJ833A)

Notes

nd LC duplex connectors on other end.

• Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±

2.0um Coating diameter: 245 ± 10um

• Optical glass: Bandwidth: For LED sources: 1500/500 MHz-km

@850/1300nm.

• Optical glass: Bandwidth: For Laser sources: 2000/500 MHz-km

@850/1300nm. VCSEL Laser sources: 600 / 600 meters
@850/1300nm for Gigabit Ethernet compliant links.

• CABLE: The cable is duplex zip cord graded index 50/125um

multimode optical fiber and designed to work in both the 850 and
1300 nm wavelength windows.

• BULK CABLE & CABLE ASSEMBLY CONFIGURATION:

• Jacket Material: Riser Grade - Low Smoke Zero Halogen

thermoplastic.

• Jacket Color: Aqua for OM3 multimode per TIA 598

• Boot Color: White

• Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003

dB/M added for lengths > 30 meters.

• Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @

1310 nm @ 23°C as tested in accordance with EIA 455-46.

• Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

n TIA-492AAAC for

:

Services

ebsite at

for details on the service-

Hewlett Packard

HP LC to LC Multi-mode
OM3 2-Fiber 1.0m 1­Fiber Optic Cable

(AJ834A)

Cabling

µm (core/cladding) diameter, multimode fiber optic, with effective

:

d in TIA-492AAAC for

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Accessory Product Details

Page 23

Maximum distance

10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex connectors on one
en

Refer to the Hewlett Pack

http://www.hpe.com/networking/services

level descriptions and product numbers. For details about services and
response times in your area, please co
Enterprise sales office.

Cable type

50/125
modal bandwidth of 2000
distances of up to 300 m;

Maximum distance

10Gbps Transfer Rate (Ethernet): 300m

Cable Specs: Tight buffered duplex fiber optic multimode OM3 50/125 um
fiber optic cable and Ethernet assembly with LC duplex co
end and LC duplex connectors on other end.

@850/1300nm.

d and LC duplex connectors on other end.

• Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±

2.0um Coating diameter: 245 ± 10um

• Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km

@850/1300nm.

• Optical Glass: For Laser sources: 2000/500 MHz-km

@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.

• CABLE: The cable is duplex zip cord graded index 50/125um

multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.

• BULK CABLE & CABLE ASSEMBLY CONFIGURATION:

• Jacket Material: Riser Grade - Low Smoke Zero Halogen

thermoplastic.

• Jacket Color: Aqua for OM3 multimode per TIA 598

• Boot Color: White

• Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003

dB/M added for lengths > 30 meters.

• Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @

1310 nm @ 23°C as tested in accordance with EIA 455-46.

• Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Services

:

ard Enterprise website at

for details on the service-

HP LC to LC Multi-mode
OM3 2-Fiber 2.0m 1-

Cabling

µm (core/cladding) diameter, multimode fiber optic, with effective

Pack Fiber Optic Cable
(AJ835A)

Notes

• Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±

2.0um Coating diameter: 245 ± 10um

• Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km

ntact your local Hewlett Packard

:

MHz/km as detailed in TIA-492AAAC for

:

nnectors on one

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Accessory Product Details

Page 24

Refer to the

http://www.hpe.com/networking/services

level descriptions and product numbers. For details about services and
response times in your are
Enterprise sales office.

Cable type

50/125
modal bandwidt
distances of up to 300 m;

Maximum distance

10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: This specification defines the detail requirements for a tight
buffered duplex fiber optic multimode OM3
Ethernet assembly with LC duplex connectors on one end and LC duplex
connectors on other end.

• Optical Glass: For Laser sources: 2000/500 MHz-km

@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.

• CABLE: The cable is duplex zip cord graded index 50/125um

multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.

• BULK CABLE & CABLE ASSEMBLY CONFIGURATION:

• Jacket Material: Riser Grade - Low Smoke Zero Halogen

thermoplastic.

• Jacket Color: Aqua for OM3 multimode per TIA 598

• Boot Color: White

• Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003

dB/M added for lengths > 30 meters.

• Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @

1310 nm @ 23°C as tested in accordance with EIA 455-46.

• Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Services

HP LC to LC Multi-mode
OM3 2-Fiber 5.0m 1-

Cabling

µm core/cladding) diameter, multimode fiber optic, with effective

Pack Fiber Optic Cable

(AJ836A)

• Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±

2.0um Coating diameter: 245 ± 10um

• Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km

@850/1300nm.

• Optical Glass: For Laser sources: 2000/500 MHz-km

@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.

• CABLE: The cable is duplex zip cord graded index 50/125um

multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.

• BULK CABLE & CABLE ASSEMBLY CONFIGURATION:

• Jacket Material: Riser Grade - Low Smoke Zero Halogen

thermoplastic.

Hewlett Packard Enterprise website at

for details on the service-

a, please contact your local Hewlett Packard

:

h of 2000 MHz/km as detailed in TIA-492AAAC for

:

50/125 um fiber optic cable and

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Accessory Product Details

Page 25

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

level descriptions and product
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.

Cable type

50/125
modal bandwidth of 2000 MHz/km as detailed in TIA
distances of up to 300 m;

Maximum distance

10Gbps Transfer Rate (Ethernet): 300m

Cable Specs: Tight buffered duplex fiber optic mul
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

• Jacket Color: Aqua for OM3 multimode per TIA 598

• Boot Color: White

• Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003

dB/M added for lengths > 30 meters.

• Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @

1310 nm @ 23°C as tested in accordance with EIA 455-46.

• Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Services

for details on the service-

numbers. For details about services and

HP LC to LC Multi-mode
OM3 2-Fiber 15.0m 1-

Cabling

µm (core/cladding) diameter, multimode fiber optic, with effective

Pack Fiber Optic Cable

(AJ837A)

Notes

• Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±

2.0um Coating diameter: 245 ± 10um

• Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km

@850/1300nm.

• Optical Glass: For Laser sources: 2000/500 MHz-km

@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.

• CABLE: The cable is duplex zip cord graded index 50/125um

multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.

• BULK CABLE & CABLE ASSEMBLY CONFIGURATION:

• Jacket Material: Riser Grade - Low Smoke Zero Halogen

thermoplastic.

• Jacket Color: Aqua for OM3 multimode per TIA 598

• Boot Color: White

• Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003

dB/M added for lengths > 30 meters.

• Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @

1310 nm @ 23°C as tested in accordance with EIA 455-46.

• Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Services

:

-492AAAC for

:

timode OM3 50/125 um

for details on the service-

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Accessory Product Details

Page 26

level descriptions an
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.

HP LC to LC Multi-mode

Cabling

Cable type

50/125
modal bandwidth of 2000 MHz/km as detailed in TIA
distances of up to 300 m;

Maximum distance

10Gbps Transfer Rate (Ethernet): 300m

Cable Specs: Tight buffered duplex fiber
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

level descr
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.

Cable type

50/125
modal bandwidth of 2000 MHz/km as detailed in TIA
distances of up to 300 m;

Maximum distance

OM3 2-Fiber 30.0m 1­Pack Fiber Optic Cable

(AJ838A)

Notes

d product numbers. For details about services and

:

µm (core/cladding) diameter, multimode fiber optic, with effective

-492AAAC for

:

optic multimode OM3 50/125 um

• Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±

2.0um Coating diameter: 245 ± 10um

• Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km

@850/1300nm.

• Optical Glass: For Laser sources: 2000/500 MHz-km

@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.

• CABLE: The cable is duplex zip cord graded index 50/125um

multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.

• BULK CABLE & CABLE ASSEMBLY CONFIGURATION:

• Jacket Material: Riser Grade - Low Smoke Zero Halogen

thermoplastic.

• Jacket Color: Aqua for OM3 multimode per TIA 598

• Boot Color: White

• Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003

dB/M added for lengths > 30 meters.

• Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @

1310 nm @ 23°C as tested in accordance with EIA 455-46.

• Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Services

HP LC to LC Multi-mode
OM3 2-Fiber 50.0m 1­Pack Fiber Optic Cable

(AJ839A)

Cabling

µm (core/cladding) diameter, multimode fiber optic, with effective

for details on the service-

iptions and product numbers. For details about services and

:

-492AAAC for

:

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Accessory Product Details

Page 27

10Gbps Transfer Rate (Ethernet): 300m

Notes

Cable Specs: Tight buffered du
fiber optic cable and Ethernet assembly with LC duplex connectors on one
end and LC duplex connectors on other end.

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

l
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.

Cable Specs: Gra
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.

• Core Diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating

diameter: 245 ± 10um

• Bandwidth: 3000 MHz

• Jacket Color: Blue

• Jacket Material: Riser Grade

thermoplastic

• Boot Color: White

• Outer Jacket Print: HP

Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.

• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m

added for lengths >30m

plex fiber optic multimode OM3 50/125 um

• Dimensions: Core diameter: 50 ± 3.0um Cladding diameter: 125 ±

2.0um Coating diameter: 245 ± 10um

• Optical Glass Bandwidth: For LED sources: 1500/500 MHz-km

@850/1300nm.

• Optical Glass: For Laser sources: 2000/500 MHz-km

@850/1300nm. VCSEL Laser sources: Shall achieve 600 / 600
meters @850/1300nm for Gigabit Ethernet compliant links.

• CABLE: The cable is duplex zip cord graded index 50/125um

multimode optical fiber. The cable is designed to work in both the
850 and 1300 nm wavelength windows.

• BULK CABLE & CABLE ASSEMBLY CONFIGURATION:

• Jacket Material: Riser Grade - Low Smoke Zero Halogen

thermoplastic.

• Jacket Color: Aqua for OM3 multimode per TIA 598

• Boot Color: White

• Insertion Loss: less than 0.5 dB @ 850 with LED source, 0.003

dB/M added for lengths > 30 meters.

• Maximum Cable attenuation: 3.0 dB/km @ 850 nm, 1.0 dB/Km @

1310 nm @ 23°C as tested in accordance with EIA 455-46.

• Weight: Air Packed Weight: 1 LB Net Weight: 0.454Kg

Services

HP Premier Flex LC/LC

Notes

evel descriptions and product numbers. For details about services and

Multi-mode OM4 2 fiber
1m Cable (QK732A)

for details on the service-

ded-index, "bendable" fiber optic multimode OM3+

-km @ 850nm (Laser)

– Low Smoke Zero Halogen (LSZH)

E PremierFlex OM3+ Fiber Optic Cable, 50/125um,

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Accessory Product Details

Page 28

• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm

@ 23°C as tested in accordance

Services

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

level descriptions and product numbers. For details about
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.

Cable Specs: Graded
50/125u
on each end.

• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating

diameter: 245 ± 10um

• Bandwidth: 3000 MHz

• Jacket Color: Blue

• Jacket Material: Riser Grade

thermoplastic

• Boot Color: White

• Outer Jacket Print: HP

Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of t

• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m

added for lengths >30m

• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm

@ 23°C as tested in accordance with EIA 455

Refer to the Hewlett Packard

http://www.hpe.com/networking/services

level descriptions and product numbers. For details about services and
response times in your area, please contac
Enterprise sales office.

Cable Specs: Graded
50/125um duplex cable and Ethernet assembly with LC duplex conn
on each end.

• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating

diameter: 245 ± 10um

• Bandwidth: 3000 MHz

• Jacket Color: Blue

• Jacket Material: Riser Grade

thermoplastic

• Boot Co

• Outer Jacket Print: HP

Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.

• Insertion Loss: Less than 0.5dB @ 850nm with

added for lengths >30m

with EIA 455-45

for details on the service-

services and

HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
2m Cable (QK733A)

Notes

Services

-index, "bendable" fiber optic multimode OM3+

m duplex cable and Ethernet assembly with LC duplex connectors

-km @ 850nm (Laser)

– Low Smoke Zero Halogen (LSZH)

E PremierFlex OM3+ Fiber Optic Cable, 50/125um,

he cable.

-45

Enterprise website at

for details on the service-

HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
5m Cable (QK734A)

Notes

lor: White

t your local Hewlett Packard

-index, "bendable" fiber optic multimode OM3+
ectors

-km @ 850nm (Laser)

– Low Smoke Zero Halogen (LSZH)

E PremierFlex OM3+ Fiber Optic Cable, 50/125um,

LED source, 0.003dB/m

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Accessory Product Details

Page 29

• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm

@ 23°C as tested in accordance with EIA 455

Services

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.

Cable Specs: Graded
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.

• Core diameter: 50um ±3um, Claddin

diameter: 245 ± 10um

• Bandwidth: 3000 MHz

• Jacket Color: Blue

• Jacket Material: Riser Grade

thermoplastic

• Boot Color: White

• Outer Jacket Print: HP

Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.

• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m

added for lengths >30m

• Maximum

@ 23°C as tested in accordance with EIA 455

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/servi

level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.

Cable Specs: Graded
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.

• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating

diameter: 245 ± 10um

•

• Jacket Color: Blue

• Jacket Material: Riser Grade

thermoplastic

• Boot Color: White

• Outer Jacket Print: HP

Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stripe that runs the entire length of the cable.

• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m

added for lengths >30m

-45

for details on the service-

HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
15m Cable (QK735A)

Notes

Services

-index, "bendable" fiber optic multimode OM3+

g diameter: 125um ±2um; Coating

-km @ 850nm (Laser)

– Low Smoke Zero Halogen (LSZH)

E PremierFlex OM3+ Fiber Optic Cable, 50/125um,

Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm

-45

ces for details on the service-

HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
30m Cable (QK736A)

Notes

Bandwidth: 3000 MHz-km @ 850nm (Laser)

-index, "bendable" fiber optic multimode OM3+

– Low Smoke Zero Halogen (LSZH)

E PremierFlex OM3+ Fiber Optic Cable, 50/125um,

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Accessory Product Details

Page 30

• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310

@ 23°C as tested in accordance with EIA 455

Services

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

level descriptions and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.

Cable Specs: Graded
50/125um duplex cable and Ethernet assembly with LC duplex connectors
on each end.

• Core diameter: 50um ±3um, Cladding diameter: 125um ±2um; Coating

diameter: 245 ± 10um

• Bandwidth: 3000 MHz

• Jacket Color:

• Jacket Material: Riser Grade

thermoplastic

• Boot Color: White

• Outer Jacket Print: HP

Type OFNR (UL), LSZH, cUL, OFN FT4, ROHS. Cable also has a longitudinal
white stri

• Insertion Loss: Less than 0.5dB @ 850nm with LED source, 0.003dB/m

added for lengths >30m

• Maximum Cable Attenuation: 3.0 dB/km @ 850nm, 1.0 dB/km @ 1310nm

@ 23°C as tested in accordance with EIA 455

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

level descriptions and product numbers. For details about services and
respons
Enterprise sales office.

The rack mounting kit supports the 1U, full width switches in the following
switch series and the power
Series, E2610 Series, E2810 Series, E2910 Series, E3500 Series, and the E620
Power Supply This universal rack mounting kit is design to fit the following
racks: HP
Vantage S2, APC Netshelter 600mm, and APC Netshelter 800mm. It may
well fit many other brands and models too.

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com

level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.

HPE X111 100M SFP LC
FX Transceiver

Ports

1 LC 100BASE

Physical characteristics

Dimensions: 2.7(d) x 0.54
Weight: 0.06 lb. (0.03 kg)

nm

-45

for details on the service-

product numbers. For details about services and

HP Premier Flex LC/LC
Multi-mode OM4 2 fiber
50m Cable (QK737A)

Notes

Services

-index, "bendable" fiber optic multimode OM3+

-km @ 850nm (Laser)

Blue

– Low Smoke Zero Halogen (LSZH)

E PremierFlex OM3+ Fiber Optic Cable, 50/125um,

pe that runs the entire length of the cable.

-45

for details on the service-

e times in your area, please contact your local Hewlett Packard

HPE X410 1U Universal
4-post Rackmount Kit

(J9583A)

Notes

E 10K 10642, HPE 10K 10842, Panduit CN, Panduit CS, Wrightline

Services

(J9054C)

supply: V1810 Series, E2510 Series, E2520

/networking/services for details on the service-

-FX port (IEEE 802.3u Type 100BASE-FX); Duplex: half or full
(w) x 0.48(h) in. (6.86 x 1.38 x 1.22 cm)

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Accessory Product Details

Page 31

HPE X111 100M SFP LC FX
Transceiver: An SFP
format 100
transceiver with LC
connectors using FX
technology.

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)

Operating relative humidity: 5% to 95%

Nonoperating/Storage temperature:

Nonoperat

Altitude: up to 10,000 ft. (3 km)

Cabling

Cable type:

62.5/125
metal content, multimode fiber optic, complying with ITU
ISO/IEC 793

• 2 km (full duplex) or 412 m (half duplex)

Notes

Transmitter wavelength: 1310nm
Power consumption is 1.1 watt maximum.
For supported platforms and minimum software requirements to support
this product, s
LC Transceiver" on the "ProCurve Mini

Services

Refer to the Hewlett Packard Enterprise website at

http://www

level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.

HPE X121 1G SFP LC SX
Trans

A small form
pluggable (SFP) Gigabit
SX
transceiver that provides a
full-duplex Gigabit solution
up to 550 m on multimode
fiber.

Ports

1 LC 1000BASE

Physical characteristics

Dimensions: 2.24(d) x 0.54(w)
Weight: 0.04 lb. (0.02 kg)
Transceiver form factor: SFP

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)

Operating relative humidity: 5% to 85%, noncondensing

Nonoperating/Storage temperature: -40°F to 203°F (-40°C to 85°C)

Altitude: up to 10,000 ft. (3 km)

Electrical characteristics

Power consumption typical: 0.4 W

Power consumption maximum: 0.7 W

Cabling

Type:

Maximum distance:

Cable length: 2

Fiber type: Multi Mode

-megabit

-40°F to 185°F (-40°C to 85°C)

ing/Storage relative humidity: 5% to 85%

µm or 50/125 µm (core/cladding) diameter, graded-index, low

-2 Type A1b or A1a, respectively; Maximum distance:

ee the document titled "Support for the J9054C 100-FX SFP-

-GBICs and SFPs" Manuals Web page.

.hpe.com/networking/services for details on the service-

-T G.651 and

ceiver (J4858C)

-factor

• 62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index,

low metal content, multimode fiber optic, complying with ITU-T
G.651 and ISO/IEC 793-2 Type A1b or A1a, respectively;

• 2-220 m (62.5 µm core diameter, 160 MHz*km bandwidth

• 2-275 m (62.5 µm core diameter, 200 MHz*km bandwidth

• 2-500 m (50 µm core diameter, 400 MHz*km bandwidth)

• 2-550 m (50 µm core diameter, 500 MHz*km bandwidth)

-SX port; Duplex: full only
x 0.48(h) in. (5.69 x 1.37 x 1.22 cm)

-550m

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Accessory Product Details

Page 32

Services

Refer to the Hewlett Packard Enterprise website at

http://www.

level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.

HPE X121 1G SFP LC LX
Transc

HP
Transceiver: An SFP
format
gigabit transceiver with LC
connectors using LX
technology.

Ports

1 LC 1000BASE

LX); Duplex: full only

Physical characteristics

Dimensions: 2.24(d) x 0.54(
Weight:0.04 lb. (0.02 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)

Operating relative humidity: 0% to 85%, noncondensing

Nonoperating/Storage temperature:

Altitude: up to 10,000 ft. (3 km)

Cabling

Type:

Maximum distance:

Notes

A mode conditioning patch cord may be needed in some multimode fiber
installations.
Wavelength: 1310nm
Power Consumption: < 500mW Typical

Services

Refe

http://www.hpe.com/networking/services

level descriptions and product numbers. For details about services and
response times in
Enterprise sales office.

HPE X121 1G SFP RJ45 T
Transceiver

HP
Transceiver: An SFP
format gigabit transceiver

Ports

1 R
only

Physical characteristics

Dimensions: 2.71(d) x 0.54(w) x 0.55(h) in. (6.88 x 1.37 x 1.4 cm)
Weight: 0.06 lb. (0.03 kg)

Environment

Operating temperature: 32°F to 158°F (0°C to 70°C)
over the SFP module)

hpe.com/networking/services for details on the service-

eiver (J4859C)

E X121 1G SFP LC LX

-LX port (IEEE 802.3z Type 1000BASE-

w) x 0.486(h) in. (5.69 x 1.37 x 1.23 cm)

-40°F to 212°F (-40°C to 100°C)

• Either single mode or multimode; 62.5/125 µm or 50/125 µm

(core/cladding) diameter, graded-index, low metal content,
multimode fiber optic, complying with ITU-T G.651 and ISO/IEC
793-2 Type A1b or A1a, respectively; Low metal content, single­mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2
Type B1;

• 2-550 m (multimode 62.5 µm core diameter, 500 MHz*km

bandwidth)

• 2-550 m (multimode 50 µm core diameter, 400 MHz*km

bandwidth)

• 2-550 m (multimode 50 µm core diameter, 500 MHz*km

bandwidth)

• 2-10,000 m (single-mode fiber)

r to the Hewlett Packard Enterprise website at

(J8177C)

E X121 1G SFP RJ45 T

J-45 1000BASE-T port (IEEE 802.3ab Type 1000BASE-T); Duplex: full

for details on the service-

your area, please contact your local Hewlett Packard

; with 100 LFM airflow

QuickSpecs

HPE OfficeConnect 1820 Switch Series

Accessory Product Details

Page 33

with RJ45 connectors
using 1000BaseT
technology.

Operating relative humidity: 0% to 95% @ 75°F (25°C), noncondensing

Nonoperating/Storage temperature:

Nonoperating/Storage relative humidity: 0% to 95% @ 77°F (25°C),
nonco

Altitude: up to 10,000 ft. (3000 km)

Cabling

Cable type:
1000BASE
pair unshielded twisted pair (UTP) or shielded twisted pair (STP) balanced,
complying with IEEE 802.3ab 1000BASE
Maximum distance:

• 100 m

Notes

Power consumption is nominally 1 watt.
For supported platforms and minimum software requirements to support
this product, see the document titled "Support for the J8177C 1000Base
Mini
The J8177C Gigabit copper mini
ports.
The J8177C is capable of 100 Mb operation. This is supported on only the
HP
versi
operation.
Important: The earlier J8177B does not support 100 Mb operation.
When used in the ProCurve Switch gl 20
(J4908A), the J8177C mini
lower mini

Services

Refer to the Hewlett Packard Enterprise website at

http://www.hpe.com/networking/services

level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard
Enterprise sales office.

Date

Version History

Action

Description of Change:

-40°F to 185°F (-40°C to 85°C)

ndensing

E ProCurve Switch 8200zl, 5400zl, and 6200yl Series using software

-T: Category 5 (5E or better recommended), 100 Ù differential 4-

-T;

-T

-GBIC" on the "ProCurve Mini-GBICs and SFPs" Manuals Web page.

-GBIC is not supported on dual-personality

on K.12.21 or later. Use the "auto-100" port setting to enable 100 Mb

-Port 10/100/1000 Module

-GBIC can be installed in either the upper or

-GBIC port, but will block access to the other port.

for details on the service-

06-May-2016 From Version 3 to 4 Changed Document name changed to HPE OfficeConnect 1820

Switch Series. Overview, Features and Benefits, Technical

Specifications updated.
22-Apr-2016 From Version 2 to 3 Changed SKU descriptions updated on all document
01-Dec-2015 From Version 1 to 2 Changed Overview, Features and Benefits and Technical

Specifications updated

QuickSpecs

HPE 1820 Switch Series

Summary of Changes

Page 34

Sign up for updates

Rate this document

© Copyright
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
servic
Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise
shall not be liable for technical or editorial errors or omis

To learn more, visit:

c04518995

2016 Hewlett Packard Enterprise Development LP. The information contained herein is

es are set forth in the express warranty statements accompanying such products and services.

sions contained herein.

http://www.hpe.com/networking

- 15190 - Worldwide - V4 - 06-May-2016